blob: 40a3c35ff8d7f636f1035648e328c88aed20afb4 [file] [log] [blame]
Simon Glass5cc16cb2014-06-02 22:04:55 -06001/*
2 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 */
8
9/ {
Simon Glass5cc16cb2014-06-02 22:04:55 -060010 cpus {
11 cpu@0 {
12 cpu0-supply = <&dcdc2_reg>;
13 };
14 };
15
Lokesh Vutlaa1b48852016-05-16 11:24:25 +053016 chosen {
17 stdout-path = &uart0;
18 tick-timer = &timer2;
19 };
20
Simon Glass5cc16cb2014-06-02 22:04:55 -060021 memory {
22 device_type = "memory";
23 reg = <0x80000000 0x10000000>; /* 256 MB */
24 };
25
Simon Glass5cc16cb2014-06-02 22:04:55 -060026 leds {
27 pinctrl-names = "default";
28 pinctrl-0 = <&user_leds_s0>;
29
30 compatible = "gpio-leds";
31
32 led@2 {
33 label = "beaglebone:green:heartbeat";
34 gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
35 linux,default-trigger = "heartbeat";
36 default-state = "off";
37 };
38
39 led@3 {
40 label = "beaglebone:green:mmc0";
41 gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
42 linux,default-trigger = "mmc0";
43 default-state = "off";
44 };
45
46 led@4 {
47 label = "beaglebone:green:usr2";
48 gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
Tom Rini1480fdf2015-07-31 19:55:08 -040049 linux,default-trigger = "cpu0";
Simon Glass5cc16cb2014-06-02 22:04:55 -060050 default-state = "off";
51 };
52
53 led@5 {
54 label = "beaglebone:green:usr3";
55 gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
Tom Rini1480fdf2015-07-31 19:55:08 -040056 linux,default-trigger = "mmc1";
Simon Glass5cc16cb2014-06-02 22:04:55 -060057 default-state = "off";
58 };
59 };
Tom Rini1480fdf2015-07-31 19:55:08 -040060
61 vmmcsd_fixed: fixedregulator@0 {
62 compatible = "regulator-fixed";
63 regulator-name = "vmmcsd_fixed";
64 regulator-min-microvolt = <3300000>;
65 regulator-max-microvolt = <3300000>;
66 };
67};
68
69&am33xx_pinmux {
70 pinctrl-names = "default";
71 pinctrl-0 = <&clkout2_pin>;
72
73 user_leds_s0: user_leds_s0 {
74 pinctrl-single,pins = <
75 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */
76 0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */
77 0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */
78 0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */
79 >;
80 };
81
82 i2c0_pins: pinmux_i2c0_pins {
83 pinctrl-single,pins = <
84 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
85 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
86 >;
87 };
88
89 i2c2_pins: pinmux_i2c2_pins {
90 pinctrl-single,pins = <
91 0x178 (PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */
92 0x17c (PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */
93 >;
94 };
95
96 uart0_pins: pinmux_uart0_pins {
97 pinctrl-single,pins = <
98 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
99 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
100 >;
101 };
102
103 clkout2_pin: pinmux_clkout2_pin {
104 pinctrl-single,pins = <
105 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
106 >;
107 };
108
109 cpsw_default: cpsw_default {
110 pinctrl-single,pins = <
111 /* Slave 1 */
112 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */
113 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */
114 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */
115 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */
116 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */
117 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */
118 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */
119 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */
120 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */
121 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */
122 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */
123 0x13c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */
124 0x140 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */
125 >;
126 };
127
128 cpsw_sleep: cpsw_sleep {
129 pinctrl-single,pins = <
130 /* Slave 1 reset value */
131 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
132 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
133 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
134 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
135 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
136 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
137 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
138 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
139 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
140 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
141 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
142 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
143 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
144 >;
145 };
146
147 davinci_mdio_default: davinci_mdio_default {
148 pinctrl-single,pins = <
149 /* MDIO */
150 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
151 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
152 >;
153 };
154
155 davinci_mdio_sleep: davinci_mdio_sleep {
156 pinctrl-single,pins = <
157 /* MDIO reset value */
158 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
159 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
160 >;
161 };
162
163 mmc1_pins: pinmux_mmc1_pins {
164 pinctrl-single,pins = <
165 0x160 (PIN_INPUT | MUX_MODE7) /* GPIO0_6 */
166 >;
167 };
168
169 emmc_pins: pinmux_emmc_pins {
170 pinctrl-single,pins = <
171 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
172 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
173 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
174 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
175 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
176 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
177 0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
178 0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
179 0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
180 0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
181 >;
182 };
183};
184
185&uart0 {
186 pinctrl-names = "default";
187 pinctrl-0 = <&uart0_pins>;
188
189 status = "okay";
190};
191
192&usb {
193 status = "okay";
194};
195
196&usb_ctrl_mod {
197 status = "okay";
198};
199
200&usb0_phy {
201 status = "okay";
202};
203
204&usb1_phy {
205 status = "okay";
206};
207
208&usb0 {
209 status = "okay";
210 dr_mode = "peripheral";
211};
212
213&usb1 {
214 status = "okay";
215 dr_mode = "host";
216};
217
218&cppi41dma {
219 status = "okay";
220};
221
222&i2c0 {
223 pinctrl-names = "default";
224 pinctrl-0 = <&i2c0_pins>;
225
226 status = "okay";
227 clock-frequency = <400000>;
228
229 tps: tps@24 {
230 reg = <0x24>;
231 };
232
233 baseboard_eeprom: baseboard_eeprom@50 {
234 compatible = "at,24c256";
235 reg = <0x50>;
236
237 #address-cells = <1>;
238 #size-cells = <1>;
239 baseboard_data: baseboard_data@0 {
240 reg = <0 0x100>;
241 };
242 };
Simon Glass5cc16cb2014-06-02 22:04:55 -0600243};
244
Tom Rini1480fdf2015-07-31 19:55:08 -0400245&i2c2 {
246 pinctrl-names = "default";
247 pinctrl-0 = <&i2c2_pins>;
248
249 status = "okay";
250 clock-frequency = <100000>;
251
252 cape_eeprom0: cape_eeprom0@54 {
253 compatible = "at,24c256";
254 reg = <0x54>;
255 #address-cells = <1>;
256 #size-cells = <1>;
257 cape0_data: cape_data@0 {
258 reg = <0 0x100>;
259 };
260 };
261
262 cape_eeprom1: cape_eeprom1@55 {
263 compatible = "at,24c256";
264 reg = <0x55>;
265 #address-cells = <1>;
266 #size-cells = <1>;
267 cape1_data: cape_data@0 {
268 reg = <0 0x100>;
269 };
270 };
271
272 cape_eeprom2: cape_eeprom2@56 {
273 compatible = "at,24c256";
274 reg = <0x56>;
275 #address-cells = <1>;
276 #size-cells = <1>;
277 cape2_data: cape_data@0 {
278 reg = <0 0x100>;
279 };
280 };
281
282 cape_eeprom3: cape_eeprom3@57 {
283 compatible = "at,24c256";
284 reg = <0x57>;
285 #address-cells = <1>;
286 #size-cells = <1>;
287 cape3_data: cape_data@0 {
288 reg = <0 0x100>;
289 };
290 };
291};
292
293
Simon Glass5cc16cb2014-06-02 22:04:55 -0600294/include/ "tps65217.dtsi"
295
296&tps {
Tom Rini1480fdf2015-07-31 19:55:08 -0400297 /*
298 * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only
299 * mode") at poweroff. Most BeagleBone versions do not support RTC-only
300 * mode and risk hardware damage if this mode is entered.
301 *
302 * For details, see linux-omap mailing list May 2015 thread
303 * [PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller
304 * In particular, messages:
305 * http://www.spinics.net/lists/linux-omap/msg118585.html
306 * http://www.spinics.net/lists/linux-omap/msg118615.html
307 *
308 * You can override this later with
309 * &tps { /delete-property/ ti,pmic-shutdown-controller; }
310 * if you want to use RTC-only mode and made sure you are not affected
311 * by the hardware problems. (Tip: double-check by performing a current
312 * measurement after shutdown: it should be less than 1 mA.)
313 */
314 ti,pmic-shutdown-controller;
315
Simon Glass5cc16cb2014-06-02 22:04:55 -0600316 regulators {
317 dcdc1_reg: regulator@0 {
Tom Rini1480fdf2015-07-31 19:55:08 -0400318 regulator-name = "vdds_dpr";
Simon Glass5cc16cb2014-06-02 22:04:55 -0600319 regulator-always-on;
320 };
321
322 dcdc2_reg: regulator@1 {
323 /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
324 regulator-name = "vdd_mpu";
325 regulator-min-microvolt = <925000>;
326 regulator-max-microvolt = <1325000>;
327 regulator-boot-on;
328 regulator-always-on;
329 };
330
331 dcdc3_reg: regulator@2 {
332 /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
333 regulator-name = "vdd_core";
334 regulator-min-microvolt = <925000>;
335 regulator-max-microvolt = <1150000>;
336 regulator-boot-on;
337 regulator-always-on;
338 };
339
340 ldo1_reg: regulator@3 {
Tom Rini1480fdf2015-07-31 19:55:08 -0400341 regulator-name = "vio,vrtc,vdds";
Simon Glass5cc16cb2014-06-02 22:04:55 -0600342 regulator-always-on;
343 };
344
345 ldo2_reg: regulator@4 {
Tom Rini1480fdf2015-07-31 19:55:08 -0400346 regulator-name = "vdd_3v3aux";
Simon Glass5cc16cb2014-06-02 22:04:55 -0600347 regulator-always-on;
348 };
349
350 ldo3_reg: regulator@5 {
Tom Rini1480fdf2015-07-31 19:55:08 -0400351 regulator-name = "vdd_1v8";
Simon Glass5cc16cb2014-06-02 22:04:55 -0600352 regulator-always-on;
353 };
354
355 ldo4_reg: regulator@6 {
Tom Rini1480fdf2015-07-31 19:55:08 -0400356 regulator-name = "vdd_3v3a";
Simon Glass5cc16cb2014-06-02 22:04:55 -0600357 regulator-always-on;
358 };
359 };
360};
361
362&cpsw_emac0 {
363 phy_id = <&davinci_mdio>, <0>;
364 phy-mode = "mii";
365};
366
367&cpsw_emac1 {
368 phy_id = <&davinci_mdio>, <1>;
369 phy-mode = "mii";
370};
371
372&mac {
373 pinctrl-names = "default", "sleep";
374 pinctrl-0 = <&cpsw_default>;
375 pinctrl-1 = <&cpsw_sleep>;
Tom Rini1480fdf2015-07-31 19:55:08 -0400376 status = "okay";
Simon Glass5cc16cb2014-06-02 22:04:55 -0600377};
378
379&davinci_mdio {
380 pinctrl-names = "default", "sleep";
381 pinctrl-0 = <&davinci_mdio_default>;
382 pinctrl-1 = <&davinci_mdio_sleep>;
Tom Rini1480fdf2015-07-31 19:55:08 -0400383 status = "okay";
384};
385
386&mmc1 {
387 status = "okay";
388 bus-width = <0x4>;
389 pinctrl-names = "default";
390 pinctrl-0 = <&mmc1_pins>;
Mugunthan V N2c6485b2016-05-16 11:24:27 +0530391 cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
Tom Rini1480fdf2015-07-31 19:55:08 -0400392};
393
394&aes {
395 status = "okay";
396};
397
398&sham {
399 status = "okay";
Simon Glass5cc16cb2014-06-02 22:04:55 -0600400};