blob: caa1a6959cf297c93fc6d304f25639bb951ef94a [file] [log] [blame]
Hans de Goede72cd0132016-03-23 09:59:23 +01001/*
2 * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
13 *
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
28 * conditions:
29 *
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
32 *
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44#include "sun8i-h3.dtsi"
45#include "sunxi-common-regulators.dtsi"
46
47#include <dt-bindings/gpio/gpio.h>
48#include <dt-bindings/input/input.h>
49#include <dt-bindings/pinctrl/sun4i-a10.h>
50
51/ {
52 model = "Xunlong Orange Pi 2";
53 compatible = "xunlong,orangepi-2", "allwinner,sun8i-h3";
54
55 aliases {
56 serial0 = &uart0;
Hans de Goede860fbdd2016-08-18 20:51:12 +020057 /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
58 ethernet1 = &rtl8189;
Hans de Goede72cd0132016-03-23 09:59:23 +010059 };
60
61 chosen {
62 stdout-path = "serial0:115200n8";
63 };
64
65 leds {
66 compatible = "gpio-leds";
67 pinctrl-names = "default";
68 pinctrl-0 = <&leds_opc>, <&leds_r_opc>;
69
70 status_led {
71 label = "orangepi:red:status";
72 gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
73 };
74
75 pwr_led {
76 label = "orangepi:green:pwr";
77 gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
78 default-state = "on";
79 };
80 };
81
82 r_gpio_keys {
83 compatible = "gpio-keys";
84 pinctrl-names = "default";
85 pinctrl-0 = <&sw_r_opc>;
86
87 sw2 {
88 label = "sw2";
89 linux,code = <BTN_1>;
90 gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>;
91 };
92
93 sw4 {
94 label = "sw4";
95 linux,code = <BTN_0>;
96 gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
97 };
98 };
99
100 wifi_pwrseq: wifi_pwrseq {
101 compatible = "mmc-pwrseq-simple";
102 pinctrl-names = "default";
103 pinctrl-0 = <&wifi_pwrseq_pin_orangepi>;
104 reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 WIFI_EN */
105 };
106};
107
108&ehci1 {
109 status = "okay";
110};
111
Hans de Goede019731a2016-09-03 10:21:35 +0200112&emac {
113 phy = <&phy1>;
114 phy-mode = "mii";
115 allwinner,use-internal-phy;
116 allwinner,leds-active-low;
117 status = "okay";
118 phy1: ethernet-phy@1 {
119 reg = <1>;
120 };
121};
122
Hans de Goede72cd0132016-03-23 09:59:23 +0100123&ir {
124 pinctrl-names = "default";
125 pinctrl-0 = <&ir_pins_a>;
126 status = "okay";
127};
128
129&mmc0 {
130 pinctrl-names = "default";
131 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
132 vmmc-supply = <&reg_vcc3v3>;
133 bus-width = <4>;
134 cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
135 cd-inverted;
136 status = "okay";
137};
138
139&mmc1 {
140 pinctrl-names = "default";
141 pinctrl-0 = <&mmc1_pins_a>;
142 vmmc-supply = <&reg_vcc3v3>;
143 mmc-pwrseq = <&wifi_pwrseq>;
144 bus-width = <4>;
145 non-removable;
146 status = "okay";
Hans de Goede860fbdd2016-08-18 20:51:12 +0200147
148 /*
149 * Explicitly define the sdio device, so that we can add an ethernet
150 * alias for it (which e.g. makes u-boot set a mac-address).
151 */
152 rtl8189: sdio_wifi@1 {
153 reg = <1>;
154 };
Hans de Goede72cd0132016-03-23 09:59:23 +0100155};
156
157&pio {
158 leds_opc: led_pins@0 {
159 allwinner,pins = "PA15";
160 allwinner,function = "gpio_out";
161 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
162 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
163 };
164};
165
166&r_pio {
167 leds_r_opc: led_pins@0 {
168 allwinner,pins = "PL10";
169 allwinner,function = "gpio_out";
170 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
171 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
172 };
173
174 sw_r_opc: key_pins@0 {
175 allwinner,pins = "PL3", "PL4";
176 allwinner,function = "gpio_in";
177 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
178 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
179 };
180
181 wifi_pwrseq_pin_orangepi: wifi_pwrseq_pin@0 {
182 allwinner,pins = "PL7";
183 allwinner,function = "gpio_out";
184 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
185 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
186 };
187};
188
189&reg_usb1_vbus {
190 gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
191 status = "okay";
192};
193
194&uart0 {
195 pinctrl-names = "default";
196 pinctrl-0 = <&uart0_pins_a>;
197 status = "okay";
198};
199
200&usb1_vbus_pin_a {
201 allwinner,pins = "PG13";
202};
203
204&usbphy {
205 usb1_vbus-supply = <&reg_usb1_vbus>;
206 status = "okay";
207};