blob: f57047d1d3980dd03ffde0906fb7bd01e31d50a3 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001// SPDX-License-Identifier: GPL-2.0+
Mingkai Hua8d97582013-07-04 17:33:43 +08002/**
3 * Copyright 2013 Freescale Semiconductor
4 * Author: Mingkai Hu <Mingkai.hu@freescale.com>
5 * Po Liu <Po.Liu@freescale.com>
6 *
Mingkai Hua8d97582013-07-04 17:33:43 +08007 * This file provides support for the board-specific CPLD used on some Freescale
8 * reference boards.
9 *
10 * The following macros need to be defined:
11 *
12 * CONFIG_SYS_CPLD_BASE - The virtual address of the base of the
13 * CPLD register map
14 *
15 */
16
17#include <common.h>
18#include <command.h>
19#include <asm/io.h>
20
21#include "cpld.h"
22/**
23 * Set the boot bank to the alternate bank
24 */
25void cpld_set_altbank(u8 banksel)
26{
27 struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
28 u8 reg11;
29
30 reg11 = in_8(&cpld_data->flhcsr);
31
32 switch (banksel) {
33 case 1:
34 out_8(&cpld_data->flhcsr, (reg11 & CPLD_BANKSEL_MASK)
35 | CPLD_BANKSEL_EN | CPLD_SELECT_BANK1);
36 break;
37 case 2:
38 out_8(&cpld_data->flhcsr, (reg11 & CPLD_BANKSEL_MASK)
39 | CPLD_BANKSEL_EN | CPLD_SELECT_BANK2);
40 break;
41 case 3:
42 out_8(&cpld_data->flhcsr, (reg11 & CPLD_BANKSEL_MASK)
43 | CPLD_BANKSEL_EN | CPLD_SELECT_BANK3);
44 break;
45 case 4:
46 out_8(&cpld_data->flhcsr, (reg11 & CPLD_BANKSEL_MASK)
47 | CPLD_BANKSEL_EN | CPLD_SELECT_BANK4);
48 break;
49 default:
50 printf("Invalid value! [1-4]\n");
51 return;
52 }
53
54 udelay(100);
55 do_reset(NULL, 0, 0, NULL);
56}
57
58/**
59 * Set the boot bank to the default bank
60 */
61void cpld_set_defbank(void)
62{
63 cpld_set_altbank(4);
64}
65
66#ifdef DEBUG
67static void cpld_dump_regs(void)
68{
69 struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
70
71 printf("chipid1 = 0x%02x\n", in_8(&cpld_data->chipid1));
72 printf("chipid2 = 0x%02x\n", in_8(&cpld_data->chipid2));
73 printf("hwver = 0x%02x\n", in_8(&cpld_data->hwver));
74 printf("cpldver = 0x%02x\n", in_8(&cpld_data->cpldver));
75 printf("rstcon = 0x%02x\n", in_8(&cpld_data->rstcon));
76 printf("flhcsr = 0x%02x\n", in_8(&cpld_data->flhcsr));
77 printf("wdcsr = 0x%02x\n", in_8(&cpld_data->wdcsr));
78 printf("wdkick = 0x%02x\n", in_8(&cpld_data->wdkick));
79 printf("fancsr = 0x%02x\n", in_8(&cpld_data->fancsr));
80 printf("ledcsr = 0x%02x\n", in_8(&cpld_data->ledcsr));
81 printf("misc = 0x%02x\n", in_8(&cpld_data->misccsr));
82 printf("bootor = 0x%02x\n", in_8(&cpld_data->bootor));
83 printf("bootcfg1 = 0x%02x\n", in_8(&cpld_data->bootcfg1));
84 printf("bootcfg2 = 0x%02x\n", in_8(&cpld_data->bootcfg2));
85 printf("bootcfg3 = 0x%02x\n", in_8(&cpld_data->bootcfg3));
86 printf("bootcfg4 = 0x%02x\n", in_8(&cpld_data->bootcfg4));
87 putc('\n');
88}
89#endif
90
Po Liueb6b4582014-01-10 10:10:59 +080091#ifndef CONFIG_SPL_BUILD
Mingkai Hua8d97582013-07-04 17:33:43 +080092int cpld_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
93{
94 int rc = 0;
95 unsigned char value;
96
97 if (argc <= 1)
98 return cmd_usage(cmdtp);
99
100 if (strcmp(argv[1], "reset") == 0) {
101 if (!strcmp(argv[2], "altbank") && argv[3]) {
102 value = (u8)simple_strtoul(argv[3], NULL, 16);
103 cpld_set_altbank(value);
104 } else if (!argv[2])
105 cpld_set_defbank();
106 else
107 cmd_usage(cmdtp);
108#ifdef DEBUG
109 } else if (strcmp(argv[1], "dump") == 0) {
110 cpld_dump_regs();
111#endif
112 } else
113 rc = cmd_usage(cmdtp);
114
115 return rc;
116}
117
118U_BOOT_CMD(
119 cpld_cmd, CONFIG_SYS_MAXARGS, 1, cpld_cmd,
120 "Reset the board using the CPLD sequencer",
121 "reset - hard reset to default bank 4\n"
122 "cpld_cmd reset altbank [bank]- reset to alternate bank\n"
123 " - [bank] bank value select 1-4\n"
124 " - bank 1 on the flash 0x0000000~0x0ffffff\n"
125 " - bank 2 on the flash 0x1000000~0x1ffffff\n"
126 " - bank 3 on the flash 0x2000000~0x2ffffff\n"
127 " - bank 4 on the flash 0x3000000~0x3ffffff\n"
128#ifdef DEBUG
129 "cpld_cmd dump - display the CPLD registers\n"
130#endif
131 );
Po Liueb6b4582014-01-10 10:10:59 +0800132#endif