blob: 2c7918ad37219b5d2b7e08d64c420283c91b9dfe [file] [log] [blame]
Masahiro Yamadaceec4c82014-02-04 17:24:17 +09001####
2# kbuild: Generic definitions
3
4# Convenient variables
5comma := ,
Masahiro Yamada598e2d32014-04-15 13:29:00 +09006quote := "
Masahiro Yamadaceec4c82014-02-04 17:24:17 +09007squote := '
8empty :=
9space := $(empty) $(empty)
10
11###
12# Name of target with a '.' as filename prefix. foo/bar.o => foo/.bar.o
13dot-target = $(dir $@).$(notdir $@)
14
15###
16# The temporary file to save gcc -MD generated dependencies must not
17# contain a comma
18depfile = $(subst $(comma),_,$(dot-target).d)
19
20###
21# filename of target with directory and extension stripped
22basetarget = $(basename $(notdir $@))
23
24###
25# filename of first prerequisite with directory and extension stripped
26baseprereq = $(basename $(notdir $<))
27
28###
29# Escape single quote for use in echo statements
30escsq = $(subst $(squote),'\$(squote)',$1)
31
32###
33# Easy method for doing a status message
34 kecho := :
35 quiet_kecho := echo
36silent_kecho := :
37kecho := $($(quiet)kecho)
38
39###
40# filechk is used to check if the content of a generated file is updated.
41# Sample usage:
42# define filechk_sample
43# echo $KERNELRELEASE
44# endef
45# version.h : Makefile
46# $(call filechk,sample)
47# The rule defined shall write to stdout the content of the new file.
48# The existing file will be compared with the new one.
49# - If no file exist it is created
50# - If the content differ the new file is used
51# - If they are equal no change, and no timestamp update
52# - stdin is piped in from the first prerequisite ($<) so one has
53# to specify a valid file as first prerequisite (often the kbuild file)
54define filechk
55 $(Q)set -e; \
56 $(kecho) ' CHK $@'; \
57 mkdir -p $(dir $@); \
58 $(filechk_$(1)) < $< > $@.tmp; \
59 if [ -r $@ ] && cmp -s $@ $@.tmp; then \
60 rm -f $@.tmp; \
61 else \
62 $(kecho) ' UPD $@'; \
63 mv -f $@.tmp $@; \
64 fi
65endef
66
67######
68# gcc support functions
69# See documentation in Documentation/kbuild/makefiles.txt
70
71# cc-cross-prefix
72# Usage: CROSS_COMPILE := $(call cc-cross-prefix, m68k-linux-gnu- m68k-linux-)
73# Return first prefix where a prefix$(CC) is found in PATH.
74# If no $(CC) found in PATH with listed prefixes return nothing
75cc-cross-prefix = \
76 $(word 1, $(foreach c,$(1), \
77 $(shell set -e; \
78 if (which $(strip $(c))$(CC)) > /dev/null 2>&1 ; then \
79 echo $(c); \
80 fi)))
81
82# output directory for tests below
83TMPOUT := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/)
84
85# try-run
86# Usage: option = $(call try-run, $(CC)...-o "$$TMP",option-ok,otherwise)
87# Exit code chooses option. "$$TMP" is can be used as temporary file and
88# is automatically cleaned up.
Masahiro Yamada9a368d02014-02-04 17:24:44 +090089# modifed for U-Boot: prevent cc-option from leaving .*.su files
Masahiro Yamadaceec4c82014-02-04 17:24:17 +090090try-run = $(shell set -e; \
91 TMP="$(TMPOUT).$$$$.tmp"; \
92 TMPO="$(TMPOUT).$$$$.o"; \
Masahiro Yamada9a368d02014-02-04 17:24:44 +090093 TMPSU="$(TMPOUT).$$$$.su"; \
Masahiro Yamadaceec4c82014-02-04 17:24:17 +090094 if ($(1)) >/dev/null 2>&1; \
95 then echo "$(2)"; \
96 else echo "$(3)"; \
97 fi; \
Masahiro Yamada9a368d02014-02-04 17:24:44 +090098 rm -f "$$TMP" "$$TMPO" "$$TMPSU")
Masahiro Yamadaceec4c82014-02-04 17:24:17 +090099
100# as-option
101# Usage: cflags-y += $(call as-option,-Wa$(comma)-isa=foo,)
102
103as-option = $(call try-run,\
104 $(CC) $(KBUILD_CFLAGS) $(1) -c -x assembler /dev/null -o "$$TMP",$(1),$(2))
105
106# as-instr
107# Usage: cflags-y += $(call as-instr,instr,option1,option2)
108
109as-instr = $(call try-run,\
110 printf "%b\n" "$(1)" | $(CC) $(KBUILD_AFLAGS) -c -x assembler -o "$$TMP" -,$(2),$(3))
111
112# cc-option
113# Usage: cflags-y += $(call cc-option,-march=winchip-c6,-march=i586)
114
115cc-option = $(call try-run,\
Jeroen Hofstee1401d872014-07-30 21:54:51 +0200116 $(CC) -Werror $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(1) -c -x c /dev/null -o "$$TMP",$(1),$(2))
Masahiro Yamadaceec4c82014-02-04 17:24:17 +0900117
118# cc-option-yn
119# Usage: flag := $(call cc-option-yn,-march=winchip-c6)
120cc-option-yn = $(call try-run,\
Jeroen Hofstee1401d872014-07-30 21:54:51 +0200121 $(CC) -Werror $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(1) -c -x c /dev/null -o "$$TMP",y,n)
Masahiro Yamadaceec4c82014-02-04 17:24:17 +0900122
123# cc-option-align
124# Prefix align with either -falign or -malign
125cc-option-align = $(subst -functions=0,,\
126 $(call cc-option,-falign-functions=0,-malign-functions=0))
127
128# cc-disable-warning
129# Usage: cflags-y += $(call cc-disable-warning,unused-but-set-variable)
130cc-disable-warning = $(call try-run,\
131 $(CC) $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) -W$(strip $(1)) -c -x c /dev/null -o "$$TMP",-Wno-$(strip $(1)))
132
Tom Rini29c4d282016-01-19 20:39:01 -0500133# cc-name
134# Expands to either gcc or clang
135cc-name = $(shell $(CC) -v 2>&1 | grep -q "clang version" && echo clang || echo gcc)
136
Masahiro Yamadaceec4c82014-02-04 17:24:17 +0900137# cc-version
Masahiro Yamadaceec4c82014-02-04 17:24:17 +0900138cc-version = $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-version.sh $(CC))
139
140# cc-fullversion
Masahiro Yamadaceec4c82014-02-04 17:24:17 +0900141cc-fullversion = $(shell $(CONFIG_SHELL) \
142 $(srctree)/scripts/gcc-version.sh -p $(CC))
143
144# cc-ifversion
145# Usage: EXTRA_CFLAGS += $(call cc-ifversion, -lt, 0402, -O1)
Masahiro Yamada98bd0e02015-07-05 01:56:55 +0900146cc-ifversion = $(shell [ $(cc-version) $(1) $(2) ] && echo $(3) || echo $(4))
Masahiro Yamadaceec4c82014-02-04 17:24:17 +0900147
Masahiro Yamadabf4b3de2014-02-04 17:24:18 +0900148# added for U-Boot
149binutils-version = $(shell $(CONFIG_SHELL) $(srctree)/scripts/binutils-version.sh $(AS))
150dtc-version = $(shell $(CONFIG_SHELL) $(srctree)/scripts/dtc-version.sh $(DTC))
151
Masahiro Yamadaceec4c82014-02-04 17:24:17 +0900152# cc-ldoption
153# Usage: ldflags += $(call cc-ldoption, -Wl$(comma)--hash-style=both)
154cc-ldoption = $(call try-run,\
155 $(CC) $(1) -nostdlib -x c /dev/null -o "$$TMP",$(1),$(2))
156
157# ld-option
158# Usage: LDFLAGS += $(call ld-option, -X)
159ld-option = $(call try-run,\
160 $(CC) -x c /dev/null -c -o "$$TMPO" ; $(LD) $(1) "$$TMPO" -o "$$TMP",$(1),$(2))
161
162# ar-option
163# Usage: KBUILD_ARFLAGS := $(call ar-option,D)
164# Important: no spaces around options
165ar-option = $(call try-run, $(AR) rc$(1) "$$TMP",$(1),$(2))
166
Masahiro Yamada598e2d32014-04-15 13:29:00 +0900167# ld-version
Masahiro Yamada598e2d32014-04-15 13:29:00 +0900168# Note this is mainly for HJ Lu's 3 number binutil versions
169ld-version = $(shell $(LD) --version | $(srctree)/scripts/ld-version.sh)
170
171# ld-ifversion
172# Usage: $(call ld-ifversion, -ge, 22252, y)
Masahiro Yamada98bd0e02015-07-05 01:56:55 +0900173ld-ifversion = $(shell [ $(ld-version) $(1) $(2) ] && echo $(3) || echo $(4))
Masahiro Yamada598e2d32014-04-15 13:29:00 +0900174
Masahiro Yamadaceec4c82014-02-04 17:24:17 +0900175######
176
177###
178# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj=
179# Usage:
180# $(Q)$(MAKE) $(build)=dir
Masahiro Yamada176d0982014-10-30 11:06:13 +0900181build := -f $(srctree)/scripts/Makefile.build obj
Masahiro Yamadaceec4c82014-02-04 17:24:17 +0900182
183###
184# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.modbuiltin obj=
185# Usage:
186# $(Q)$(MAKE) $(modbuiltin)=dir
Masahiro Yamada176d0982014-10-30 11:06:13 +0900187modbuiltin := -f $(srctree)/scripts/Makefile.modbuiltin obj
Masahiro Yamadaceec4c82014-02-04 17:24:17 +0900188
Masahiro Yamada98bd0e02015-07-05 01:56:55 +0900189###
190# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.dtbinst obj=
191# Usage:
192# $(Q)$(MAKE) $(dtbinst)=dir
193dtbinst := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.dtbinst obj
194
195###
196# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=
197# Usage:
198# $(Q)$(MAKE) $(clean)=dir
199clean := -f $(srctree)/scripts/Makefile.clean obj
200
201###
202# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.headersinst obj=
203# Usage:
204# $(Q)$(MAKE) $(hdr-inst)=dir
205hdr-inst := -f $(srctree)/scripts/Makefile.headersinst obj
206
Masahiro Yamadaceec4c82014-02-04 17:24:17 +0900207# Prefix -I with $(srctree) if it is not an absolute path.
208# skip if -I has no parameter
209addtree = $(if $(patsubst -I%,%,$(1)), \
210$(if $(filter-out -I/%,$(1)),$(patsubst -I%,-I$(srctree)/%,$(1))) $(1))
211
212# Find all -I options and call addtree
213flags = $(foreach o,$($(1)),$(if $(filter -I%,$(o)),$(call addtree,$(o)),$(o)))
214
215# echo command.
216# Short version is used, if $(quiet) equals `quiet_', otherwise full one.
217echo-cmd = $(if $($(quiet)cmd_$(1)),\
218 echo ' $(call escsq,$($(quiet)cmd_$(1)))$(echo-why)';)
219
220# printing commands
221cmd = @$(echo-cmd) $(cmd_$(1))
222
223# Add $(obj)/ for paths that are not absolute
224objectify = $(foreach o,$(1),$(if $(filter /%,$(o)),$(o),$(obj)/$(o)))
225
226###
227# if_changed - execute command if any prerequisite is newer than
228# target, or command line has changed
229# if_changed_dep - as if_changed, but uses fixdep to reveal dependencies
230# including used config symbols
231# if_changed_rule - as if_changed but execute rule instead
232# See Documentation/kbuild/makefiles.txt for more info
233
234ifneq ($(KBUILD_NOCMDDEP),1)
235# Check if both arguments has same arguments. Result is empty string if equal.
236# User may override this check using make KBUILD_NOCMDDEP=1
237arg-check = $(strip $(filter-out $(cmd_$(1)), $(cmd_$@)) \
238 $(filter-out $(cmd_$@), $(cmd_$(1))) )
239else
240arg-check = $(if $(strip $(cmd_$@)),,1)
241endif
242
Masahiro Yamada176d0982014-10-30 11:06:13 +0900243# Replace >$< with >$$< to preserve $ when reloading the .cmd file
244# (needed for make)
245# Replace >#< with >\#< to avoid starting a comment in the .cmd file
246# (needed for make)
247# Replace >'< with >'\''< to be able to enclose the whole string in '...'
248# (needed for the shell)
249make-cmd = $(call escsq,$(subst \#,\\\#,$(subst $$,$$$$,$(cmd_$(1)))))
Masahiro Yamadaceec4c82014-02-04 17:24:17 +0900250
251# Find any prerequisites that is newer than target or that does not exist.
252# PHONY targets skipped in both cases.
253any-prereq = $(filter-out $(PHONY),$?) $(filter-out $(PHONY) $(wildcard $^),$^)
254
255# Execute command if command has changed or prerequisite(s) are updated.
256#
257if_changed = $(if $(strip $(any-prereq) $(arg-check)), \
258 @set -e; \
259 $(echo-cmd) $(cmd_$(1)); \
Masahiro Yamada176d0982014-10-30 11:06:13 +0900260 printf '%s\n' 'cmd_$@ := $(make-cmd)' > $(dot-target).cmd)
Masahiro Yamadaceec4c82014-02-04 17:24:17 +0900261
262# Execute the command and also postprocess generated .d dependencies file.
263if_changed_dep = $(if $(strip $(any-prereq) $(arg-check) ), \
264 @set -e; \
265 $(echo-cmd) $(cmd_$(1)); \
266 scripts/basic/fixdep $(depfile) $@ '$(make-cmd)' > $(dot-target).tmp;\
267 rm -f $(depfile); \
268 mv -f $(dot-target).tmp $(dot-target).cmd)
269
270# Usage: $(call if_changed_rule,foo)
271# Will check if $(cmd_foo) or any of the prerequisites changed,
272# and if so will execute $(rule_foo).
273if_changed_rule = $(if $(strip $(any-prereq) $(arg-check) ), \
274 @set -e; \
275 $(rule_$(1)))
276
277###
278# why - tell why a a target got build
279# enabled by make V=2
280# Output (listed in the order they are checked):
281# (1) - due to target is PHONY
282# (2) - due to target missing
283# (3) - due to: file1.h file2.h
284# (4) - due to command line change
285# (5) - due to missing .cmd file
286# (6) - due to target not in $(targets)
287# (1) PHONY targets are always build
288# (2) No target, so we better build it
289# (3) Prerequisite is newer than target
290# (4) The command line stored in the file named dir/.target.cmd
291# differed from actual command line. This happens when compiler
292# options changes
293# (5) No dir/.target.cmd file (used to store command line)
294# (6) No dir/.target.cmd file and target not listed in $(targets)
295# This is a good hint that there is a bug in the kbuild file
296ifeq ($(KBUILD_VERBOSE),2)
297why = \
298 $(if $(filter $@, $(PHONY)),- due to target is PHONY, \
299 $(if $(wildcard $@), \
300 $(if $(strip $(any-prereq)),- due to: $(any-prereq), \
301 $(if $(arg-check), \
302 $(if $(cmd_$@),- due to command line change, \
303 $(if $(filter $@, $(targets)), \
304 - due to missing .cmd file, \
305 - due to $(notdir $@) not in $$(targets) \
306 ) \
307 ) \
308 ) \
309 ), \
310 - due to target missing \
311 ) \
312 )
313
314echo-why = $(call escsq, $(strip $(why)))
315endif
Masahiro Yamada04a5c402015-08-12 07:31:42 +0900316
317ifdef CONFIG_SPL_BUILD
318SPL_ := SPL_
Simon Glass001f3142017-04-02 09:50:30 -0600319ifeq ($(CONFIG_TPL_BUILD),y)
320SPL_TPL_ := TPL_
321else
322SPL_TPL_ := SPL_
323endif
Masahiro Yamada04a5c402015-08-12 07:31:42 +0900324else
325SPL_ :=
Simon Glass001f3142017-04-02 09:50:30 -0600326SPL_TPL_ :=
Masahiro Yamada04a5c402015-08-12 07:31:42 +0900327endif