Eugen Hristev | f085452 | 2018-07-06 11:15:10 +0300 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ OR MIT |
| 2 | /* |
| 3 | * at91-sama5d2_icp.dts - Device Tree file for SAMA5D2 ICP board |
| 4 | * SAMA5D2 Industrial Connectivity Board |
| 5 | * |
| 6 | * Copyright (c) 2018, Microchip Technology Inc. |
| 7 | * 2018, Eugen Hristev <eugen.hristev@microchip.com> |
| 8 | */ |
| 9 | /dts-v1/; |
| 10 | #include "sama5d2.dtsi" |
| 11 | #include "sama5d2-pinfunc.h" |
| 12 | |
| 13 | / { |
| 14 | model = "Microchip SAMA5D2 ICP"; |
| 15 | compatible = "atmel,sama5d2-icp", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5"; |
| 16 | |
| 17 | aliases { |
| 18 | serial0 = &uart0; |
| 19 | i2c1 = &i2c1; |
| 20 | }; |
| 21 | |
| 22 | chosen { |
| 23 | stdout-path = "serial0:115200n8"; |
| 24 | }; |
| 25 | |
| 26 | ahb { |
| 27 | |
| 28 | sdmmc0: sdio-host@a0000000 { |
| 29 | bus-width = <4>; |
| 30 | pinctrl-names = "default"; |
| 31 | pinctrl-0 = <&pinctrl_sdmmc0_default>; |
| 32 | status = "okay"; |
| 33 | }; |
| 34 | |
| 35 | apb { |
| 36 | uart0: serial@f801c000 { /* mikrobus1 uart */ |
| 37 | pinctrl-names = "default"; |
| 38 | pinctrl-0 = <&pinctrl_mikrobus1_uart>; |
| 39 | status = "okay"; |
| 40 | }; |
| 41 | |
Razvan Stefanescu | fe5963d | 2018-12-12 12:42:05 +0200 | [diff] [blame] | 42 | macb0: ethernet@f8008000 { |
| 43 | pinctrl-names = "default"; |
| 44 | pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq &pinctrl_macb0_rst>; |
| 45 | phy-mode = "internal"; |
| 46 | status = "okay"; |
| 47 | }; |
| 48 | |
Eugen Hristev | f085452 | 2018-07-06 11:15:10 +0300 | [diff] [blame] | 49 | i2c1: i2c@fc028000 { |
| 50 | dmas = <0>, <0>; |
| 51 | pinctrl-names = "default"; |
| 52 | pinctrl-0 = <&pinctrl_i2c1_default>; |
| 53 | status = "okay"; |
| 54 | |
| 55 | eeprom@50 { |
| 56 | compatible = "atmel,24c32"; |
| 57 | reg = <0x50>; |
| 58 | pagesize = <16>; |
| 59 | }; |
| 60 | |
| 61 | eeprom@52 { |
| 62 | compatible = "atmel,24c32"; |
| 63 | reg = <0x52>; |
| 64 | pagesize = <16>; |
| 65 | }; |
| 66 | |
| 67 | eeprom@53 { |
| 68 | compatible = "atmel,24c32"; |
| 69 | reg = <0x53>; |
| 70 | pagesize = <16>; |
| 71 | }; |
| 72 | }; |
| 73 | pioA: gpio@fc038000 { |
| 74 | status = "okay"; |
| 75 | pinctrl { |
| 76 | pinctrl_i2c1_default: i2c1_default { |
| 77 | pinmux = <PIN_PD19__TWD1>, |
| 78 | <PIN_PD20__TWCK1>; |
| 79 | bias-disable; |
| 80 | }; |
| 81 | |
Razvan Stefanescu | fe5963d | 2018-12-12 12:42:05 +0200 | [diff] [blame] | 82 | pinctrl_macb0_rmii: macb0_rmii { |
| 83 | pinmux = <PIN_PD1__GRXCK>, |
| 84 | <PIN_PD2__GTXER>, |
| 85 | <PIN_PD5__GRX2>, |
| 86 | <PIN_PD6__GRX3>, |
| 87 | <PIN_PD7__GTX2>, |
| 88 | <PIN_PD8__GTX3>, |
| 89 | <PIN_PD9__GTXCK>, |
| 90 | <PIN_PD10__GTXEN>, |
| 91 | <PIN_PD11__GRXDV>, |
| 92 | <PIN_PD12__GRXER>, |
| 93 | <PIN_PD13__GRX0>, |
| 94 | <PIN_PD14__GRX1>, |
| 95 | <PIN_PD15__GTX0>, |
| 96 | <PIN_PD16__GTX1>, |
| 97 | <PIN_PD17__GMDC>, |
| 98 | <PIN_PD18__GMDIO>; |
| 99 | bias-disable; |
| 100 | }; |
| 101 | |
| 102 | pinctrl_macb0_phy_irq: macb0_phy_irq { |
| 103 | pinmux = <PIN_PD3__GPIO>; |
| 104 | bias-disable; |
| 105 | }; |
| 106 | |
| 107 | pinctrl_macb0_rst: macb0_sw_rst { |
| 108 | pinmux = <PIN_PD4__GPIO>; |
| 109 | bias-pull-up; |
| 110 | }; |
| 111 | |
Eugen Hristev | f085452 | 2018-07-06 11:15:10 +0300 | [diff] [blame] | 112 | pinctrl_sdmmc0_default: sdmmc0_default { |
| 113 | pinmux = <PIN_PA1__SDMMC0_CMD>, |
| 114 | <PIN_PA2__SDMMC0_DAT0>, |
| 115 | <PIN_PA3__SDMMC0_DAT1>, |
| 116 | <PIN_PA4__SDMMC0_DAT2>, |
| 117 | <PIN_PA5__SDMMC0_DAT3>, |
| 118 | <PIN_PA0__SDMMC0_CK>, |
| 119 | <PIN_PA13__SDMMC0_CD>; |
| 120 | bias-disable; |
| 121 | }; |
| 122 | |
| 123 | pinctrl_mikrobus1_uart: mikrobus1_uart { |
| 124 | pinmux = <PIN_PB26__URXD0>, |
| 125 | <PIN_PB27__UTXD0>; |
| 126 | bias-disable; |
| 127 | }; |
| 128 | }; |
| 129 | }; |
| 130 | }; |
| 131 | }; |
| 132 | }; |