blob: 3e05959104f175768ec6d2ecb04b4ff973eddf5b [file] [log] [blame]
Icenowy Zheng8e71a7e2016-08-27 22:16:12 +08001/*
2 * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
3 * Copyright 2016 Icenowy Zheng <icenowy@aosc.xyz>
4 *
5 * This file is dual-licensed: you can use it either under the terms
6 * of the GPL or the X11 license, at your option. Note that this dual
7 * licensing only applies to this file, and not this project as a
8 * whole.
9 *
10 * a) This file is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License as
12 * published by the Free Software Foundation; either version 2 of the
13 * License, or (at your option) any later version.
14 *
15 * This file is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * Or, alternatively,
21 *
22 * b) Permission is hereby granted, free of charge, to any person
23 * obtaining a copy of this software and associated documentation
24 * files (the "Software"), to deal in the Software without
25 * restriction, including without limitation the rights to use,
26 * copy, modify, merge, publish, distribute, sublicense, and/or
27 * sell copies of the Software, and to permit persons to whom the
28 * Software is furnished to do so, subject to the following
29 * conditions:
30 *
31 * The above copyright notice and this permission notice shall be
32 * included in all copies or substantial portions of the Software.
33 *
34 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
35 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
36 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
37 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
38 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
39 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
40 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
41 * OTHER DEALINGS IN THE SOFTWARE.
42 */
43
44/dts-v1/;
45#include "sun8i-a33.dtsi"
46#include "sun8i-reference-design-tablet.dtsi"
47
48/ {
49 model = "INet-D978 Rev 02";
50 compatible = "primux,inet-d978-rev2", "allwinner,sun8i-a33";
51
Jagan Teki9ad93c02018-08-05 00:40:11 +053052 aliases {
53 serial0 = &uart1;
54 };
55
56 chosen {
57 /* Delete debug UART as serial0 is the UART for bluetooth */
58 /delete-property/stdout-path;
59 };
60
Icenowy Zheng8e71a7e2016-08-27 22:16:12 +080061 leds {
62 compatible = "gpio-leds";
63 pinctrl-names = "default";
64 pinctrl-0 = <&led_pin_d978>;
65
66 home {
67 label = "d978:blue:home";
68 gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
69 };
70 };
71};
72
73&mmc1_pins_a {
Jagan Teki9ad93c02018-08-05 00:40:11 +053074 bias-pull-up;
Icenowy Zheng8e71a7e2016-08-27 22:16:12 +080075};
76
77&mmc1 {
78 pinctrl-names = "default";
79 pinctrl-0 = <&mmc1_pins_a>;
80 vmmc-supply = <&reg_dldo1>;
81 bus-width = <4>;
82 non-removable;
83 status = "okay";
84
85 rtl8723bs: sdio_wifi@1 {
86 reg = <1>;
87 };
88};
89
90&r_pio {
91 led_pin_d978: led_pin_d978@0 {
Jagan Teki9ad93c02018-08-05 00:40:11 +053092 pins = "PL5";
93 function = "gpio_out";
94 drive-strength = <20>;
Icenowy Zheng8e71a7e2016-08-27 22:16:12 +080095 };
96};
Jagan Teki9ad93c02018-08-05 00:40:11 +053097
98&r_uart {
99 status = "disabled";
100};
101
102&uart1 {
103 pinctrl-names = "default";
104 pinctrl-0 = <&uart1_pins_a>,
105 <&uart1_pins_cts_rts_a>;
106 status = "okay";
107};