blob: d72921eebe6bae2e1cb7182ba1eeba987212ebf6 [file] [log] [blame]
wdenkba56f622004-02-06 23:19:44 +00001/*
2 * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
3 *
4 * See file CREDITS for list of people who contributed to this
5 * project.
6 *
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 of
10 * the License, or (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
20 * MA 02111-1307 USA
21 */
22
Peter Tysere0299072009-07-17 19:01:07 -050023/*
wdenkba56f622004-02-06 23:19:44 +000024 * config for XPedite1000 from XES Inc.
25 * Ported from EBONY config by Travis B. Sawyer <tsawyer@sandburst.com>
26 * (C) Copyright 2003 Sandburst Corporation
Wolfgang Denk0c8721a2005-09-23 11:05:55 +020027 * board/config_EBONY.h - configuration for AMCC 440GP Ref (Ebony)
Peter Tysere0299072009-07-17 19:01:07 -050028 */
wdenkba56f622004-02-06 23:19:44 +000029
30#ifndef __CONFIG_H
31#define __CONFIG_H
32
Peter Tysere0299072009-07-17 19:01:07 -050033/* High Level Configuration Options */
Peter Tyser10c1b212009-07-17 19:01:16 -050034#define CONFIG_XPEDITE1000 1
Peter Tyser54381b72009-07-17 19:01:15 -050035#define CONFIG_SYS_BOARD_NAME "XPedite1000"
John Schmoller92af65492010-10-22 00:20:24 -050036#define CONFIG_SYS_FORM_PMC 1
Peter Tysere0299072009-07-17 19:01:07 -050037#define CONFIG_4xx 1 /* ... PPC4xx family */
wdenkba56f622004-02-06 23:19:44 +000038#define CONFIG_440 1
Stefan Roese846b0dd2005-08-08 12:42:22 +020039#define CONFIG_440GX 1 /* 440 GX */
wdenk3c74e322004-02-22 23:46:08 +000040#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
wdenkba56f622004-02-06 23:19:44 +000041#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
42
Wolfgang Denk2ae18242010-10-06 09:05:45 +020043#define CONFIG_SYS_TEXT_BASE 0xFFF80000
44
Peter Tyser4cdad5f2009-07-17 19:01:13 -050045/*
46 * DDR config
47 */
48#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */
49#define SPD_EEPROM_ADDRESS {0x54} /* SPD i2c spd addresses */
50#define CONFIG_VERY_BIG_RAM 1
wdenkba56f622004-02-06 23:19:44 +000051
Peter Tysere0299072009-07-17 19:01:07 -050052/*
wdenkba56f622004-02-06 23:19:44 +000053 * Base addresses -- Note these are effective addresses where the
54 * actual resources get mapped (not physical addresses)
Peter Tysere0299072009-07-17 19:01:07 -050055 */
Peter Tyser4cdad5f2009-07-17 19:01:13 -050056#define CONFIG_SYS_SDRAM_BASE 0x00000000
57#define CONFIG_SYS_FLASH_BASE 0xff000000 /* start of FLASH */
Wolfgang Denk14d0a022010-10-07 21:51:12 +020058#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
Peter Tyser4cdad5f2009-07-17 19:01:13 -050059#define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */
Peter Tyser4cdad5f2009-07-17 19:01:13 -050060#define CONFIG_SYS_ISRAM_BASE 0xc0000000 /* internal SRAM */
61#define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */
Peter Tysere0299072009-07-17 19:01:07 -050062#define CONFIG_SYS_NVRAM_BASE_ADDR (CONFIG_SYS_PERIPHERAL_BASE + 0x08000000)
63#define CONFIG_SYS_GPIO_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000700)
wdenkba56f622004-02-06 23:19:44 +000064
Peter Tyser4cdad5f2009-07-17 19:01:13 -050065/*
66 * Diagnostics
67 */
Peter Tyser9b4ef1f2009-07-17 19:01:14 -050068#define CONFIG_SYS_ALT_MEMTEST
Peter Tyser4cdad5f2009-07-17 19:01:13 -050069#define CONFIG_SYS_MEMTEST_START 0x0400000
70#define CONFIG_SYS_MEMTEST_END 0x0C00000
71
72/* POST support */
73#define CONFIG_POST (CONFIG_SYS_POST_RTC | \
74 CONFIG_SYS_POST_I2C)
75
76/*
77 * LED support
78 */
Peter Tysere0299072009-07-17 19:01:07 -050079#define USR_LED0 0x00000080
80#define USR_LED1 0x00000100
81#define USR_LED2 0x00000200
82#define USR_LED3 0x00000400
wdenkba56f622004-02-06 23:19:44 +000083
84#ifndef __ASSEMBLY__
85extern unsigned long in32(unsigned int);
86extern void out32(unsigned int, unsigned long);
87
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020088#define LED0_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED0))
89#define LED1_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED1))
90#define LED2_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED2))
91#define LED3_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED3))
wdenkba56f622004-02-06 23:19:44 +000092
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020093#define LED0_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED0))
94#define LED1_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED1))
95#define LED2_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED2))
96#define LED3_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED3))
wdenkba56f622004-02-06 23:19:44 +000097#endif
98
Peter Tyser4cdad5f2009-07-17 19:01:13 -050099/*
100 * Use internal SRAM for initial stack
101 */
Peter Tysere0299072009-07-17 19:01:07 -0500102#define CONFIG_SYS_TEMP_STACK_OCM 1
103#define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE
104#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */
Wolfgang Denk553f0982010-10-26 13:32:32 +0200105#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */
Wolfgang Denk25ddd1f2010-10-26 14:34:52 +0200106#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
Michael Zaidman800eb092010-09-20 08:51:53 +0200107#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
wdenkba56f622004-02-06 23:19:44 +0000108
Peter Tyser9b4ef1f2009-07-17 19:01:14 -0500109#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 KB for Mon */
110#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */
wdenkba56f622004-02-06 23:19:44 +0000111
Peter Tyser4cdad5f2009-07-17 19:01:13 -0500112/*
113 * Serial Port
114 */
Stefan Roese550650d2010-09-20 16:05:31 +0200115#define CONFIG_CONS_INDEX 1 /* Use UART0 */
116#define CONFIG_SYS_NS16550
117#define CONFIG_SYS_NS16550_SERIAL
118#define CONFIG_SYS_NS16550_REG_SIZE 1
119#define CONFIG_SYS_NS16550_CLK get_serial_clock()
120
Peter Tysere0299072009-07-17 19:01:07 -0500121#define CONFIG_SYS_BAUDRATE_TABLE \
122 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400}
Peter Tyser9b4ef1f2009-07-17 19:01:14 -0500123#define CONFIG_BAUDRATE 115200
Peter Tyser4cdad5f2009-07-17 19:01:13 -0500124#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
125#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
wdenkba56f622004-02-06 23:19:44 +0000126
Peter Tysere0299072009-07-17 19:01:07 -0500127/*
Peter Tyser9b4ef1f2009-07-17 19:01:14 -0500128 * Use the HUSH parser
129 */
130#define CONFIG_SYS_HUSH_PARSER
131#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
132
133/*
Peter Tyser4cdad5f2009-07-17 19:01:13 -0500134 * NOR flash configuration
Peter Tysere0299072009-07-17 19:01:07 -0500135 */
Peter Tyser42735812009-07-17 19:01:08 -0500136#define CONFIG_SYS_MAX_FLASH_BANKS 3
137#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE, 0xf0000000, 0xf4000000 }
138#define CONFIG_SYS_MAX_FLASH_SECT 512 /* sectors per device */
Peter Tyser11ad3092009-07-17 19:01:03 -0500139#define CONFIG_FLASH_CFI_DRIVER
140#define CONFIG_SYS_FLASH_CFI
141#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
Peter Tyser42735812009-07-17 19:01:08 -0500142#define CONFIG_SYS_FLASH_QUIET_TEST /* MirrorBit flashes are optional */
Peter Tysere0299072009-07-17 19:01:07 -0500143#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
144#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
wdenkba56f622004-02-06 23:19:44 +0000145
Peter Tyser4cdad5f2009-07-17 19:01:13 -0500146/*
147 * I2C
148 */
Peter Tysere0299072009-07-17 19:01:07 -0500149#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
Stefan Roesed0b0dca2010-04-01 14:37:24 +0200150#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
Peter Tysere0299072009-07-17 19:01:07 -0500151#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200152#define CONFIG_SYS_I2C_SLAVE 0x7f
Peter Tyser9b4ef1f2009-07-17 19:01:14 -0500153#define CONFIG_I2C_MULTI_BUS
wdenkba56f622004-02-06 23:19:44 +0000154
Peter Tyser4cdad5f2009-07-17 19:01:13 -0500155/* I2C EEPROM */
156#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
Peter Tysere0299072009-07-17 19:01:07 -0500157#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
158#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
159#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
wdenkba56f622004-02-06 23:19:44 +0000160
Peter Tyser4cdad5f2009-07-17 19:01:13 -0500161/* I2C RTC: STMicro M41T00 */
162#define CONFIG_RTC_M41T11 1
163#define CONFIG_SYS_I2C_RTC_ADDR 0x68
164#define CONFIG_SYS_M41T11_BASE_YEAR 2000
wdenkba56f622004-02-06 23:19:44 +0000165
Peter Tysere0299072009-07-17 19:01:07 -0500166/*
167 * PCI
wdenkba56f622004-02-06 23:19:44 +0000168 */
169/* General PCI */
Peter Tysere0299072009-07-17 19:01:07 -0500170#define CONFIG_PCI /* include pci support */
171#define CONFIG_PCI_PNP /* do pci plug-and-play */
172#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
173#define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */
wdenkba56f622004-02-06 23:19:44 +0000174
175/* Board-specific PCI */
Peter Tysere0299072009-07-17 19:01:07 -0500176#define CONFIG_SYS_PCI_TARGET_INIT /* let board init pci target */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200177#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014 /* IBM */
178#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
Peter Tysere0299072009-07-17 19:01:07 -0500179#define CONFIG_SYS_PCI_FORCE_PCI_CONV /* Force PCI Conventional Mode */
180
wdenkba56f622004-02-06 23:19:44 +0000181/*
Peter Tyser4cdad5f2009-07-17 19:01:13 -0500182 * Networking options
183 */
184#define CONFIG_PPC4xx_EMAC
185#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
Peter Tyser4cdad5f2009-07-17 19:01:13 -0500186#define CONFIG_MII 1 /* MII PHY management */
187#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
188#define CONFIG_SYS_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
189#define CONFIG_ETHPRIME "ppc_4xx_eth2"
190#define CONFIG_PHY_ADDR 4 /* PHY address phy0 not populated */
191#define CONFIG_PHY2_ADDR 4 /* PHY address phy2 */
192#define CONFIG_HAS_ETH2 1 /* add support for "eth2addr" */
193#define CONFIG_PHY3_ADDR 8 /* PHY address phy3 */
194#define CONFIG_HAS_ETH3 1 /* add support for "eth3addr" */
195
196/* BOOTP options */
197#define CONFIG_BOOTP_BOOTFILESIZE
198#define CONFIG_BOOTP_BOOTPATH
199#define CONFIG_BOOTP_GATEWAY
200#define CONFIG_BOOTP_HOSTNAME
201
202/*
203 * Command configuration
204 */
205#include <config_cmd_default.h>
206
207#define CONFIG_CMD_ASKENV
208#define CONFIG_CMD_DATE
209#define CONFIG_CMD_DHCP
210#define CONFIG_CMD_EEPROM
211#define CONFIG_CMD_ELF
212#define CONFIG_CMD_FLASH
213#define CONFIG_CMD_I2C
214#define CONFIG_CMD_IRQ
215#define CONFIG_CMD_JFFS2
216#define CONFIG_CMD_MII
217#define CONFIG_CMD_NET
218#define CONFIG_CMD_PCI
219#define CONFIG_CMD_PING
220#define CONFIG_CMD_SAVEENV
221#define CONFIG_CMD_SNTP
222
223/*
224 * Miscellaneous configurable options
225 */
226#define CONFIG_SYS_LONGHELP /* undef to save memory */
227#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
228#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
Peter Tyser4cdad5f2009-07-17 19:01:13 -0500229#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
Peter Tyser4cdad5f2009-07-17 19:01:13 -0500230#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
231#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
232#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
233#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
Peter Tyser9b4ef1f2009-07-17 19:01:14 -0500234#define CONFIG_CMDLINE_EDITING 1 /* Command-line editing */
235#define CONFIG_BOOTDELAY 3 /* -1 disables auto-boot */
236#define CONFIG_PANIC_HANG /* do not reset board on panic */
237#define CONFIG_PREBOOT /* enable preboot variable */
238#define CONFIG_FIT 1
239#define CONFIG_FIT_VERBOSE 1
240#define CONFIG_INTEGRITY /* support booting INTEGRITY OS */
241#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
Peter Tyser4cdad5f2009-07-17 19:01:13 -0500242
243/*
wdenkba56f622004-02-06 23:19:44 +0000244 * For booting Linux, the board info and command line data
245 * have to be in the first 8 MB of memory, since this is
246 * the maximum mapped by the Linux kernel during initialization.
247 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200248#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
wdenkba56f622004-02-06 23:19:44 +0000249
250/*
Peter Tyser4cdad5f2009-07-17 19:01:13 -0500251 * Environment Configuration
252 */
253#define CONFIG_ENV_IS_IN_FLASH 1
254#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128k (one sector) for env */
255#define CONFIG_ENV_SIZE 0x8000
256#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - (256 * 1024))
257
258/*
Peter Tyserc4ae1a02009-07-17 19:01:12 -0500259 * Flash memory map:
260 * fff80000 - ffffffff U-Boot (512 KB)
261 * fff40000 - fff7ffff U-Boot Environment (256 KB)
262 * fff00000 - fff3ffff FDT (256KB)
263 * ffc00000 - ffefffff OS image (3MB)
264 * ff000000 - ffbfffff OS Use/Filesystem (12MB)
265 */
266
Wolfgang Denk14d0a022010-10-07 21:51:12 +0200267#define CONFIG_UBOOT_ENV_ADDR MK_STR(CONFIG_SYS_TEXT_BASE)
Peter Tyserc4ae1a02009-07-17 19:01:12 -0500268#define CONFIG_FDT_ENV_ADDR MK_STR(0xfff00000)
269#define CONFIG_OS_ENV_ADDR MK_STR(0xffc00000)
270
271#define CONFIG_PROG_UBOOT \
272 "$download_cmd $loadaddr $ubootfile; " \
273 "if test $? -eq 0; then " \
274 "protect off "CONFIG_UBOOT_ENV_ADDR" +80000; " \
275 "erase "CONFIG_UBOOT_ENV_ADDR" +80000; " \
276 "cp.w $loadaddr "CONFIG_UBOOT_ENV_ADDR" 40000; " \
277 "protect on "CONFIG_UBOOT_ENV_ADDR" +80000; " \
278 "cmp.b $loadaddr "CONFIG_UBOOT_ENV_ADDR" 80000; " \
279 "if test $? -ne 0; then " \
280 "echo PROGRAM FAILED; " \
281 "else; " \
282 "echo PROGRAM SUCCEEDED; " \
283 "fi; " \
284 "else; " \
285 "echo DOWNLOAD FAILED; " \
286 "fi;"
287
288#define CONFIG_BOOT_OS_NET \
289 "$download_cmd $osaddr $osfile; " \
290 "if test $? -eq 0; then " \
291 "if test -n $fdtaddr; then " \
292 "$download_cmd $fdtaddr $fdtfile; " \
293 "if test $? -eq 0; then " \
294 "bootm $osaddr - $fdtaddr; " \
295 "else; " \
296 "echo FDT DOWNLOAD FAILED; " \
297 "fi; " \
298 "else; " \
299 "bootm $osaddr; " \
300 "fi; " \
301 "else; " \
302 "echo OS DOWNLOAD FAILED; " \
303 "fi;"
304
305#define CONFIG_PROG_OS \
306 "$download_cmd $osaddr $osfile; " \
307 "if test $? -eq 0; then " \
308 "erase "CONFIG_OS_ENV_ADDR" +$filesize; " \
309 "cp.b $osaddr "CONFIG_OS_ENV_ADDR" $filesize; " \
310 "cmp.b $osaddr "CONFIG_OS_ENV_ADDR" $filesize; " \
311 "if test $? -ne 0; then " \
312 "echo OS PROGRAM FAILED; " \
313 "else; " \
314 "echo OS PROGRAM SUCCEEDED; " \
315 "fi; " \
316 "else; " \
317 "echo OS DOWNLOAD FAILED; " \
318 "fi;"
319
320#define CONFIG_PROG_FDT \
321 "$download_cmd $fdtaddr $fdtfile; " \
322 "if test $? -eq 0; then " \
323 "erase "CONFIG_FDT_ENV_ADDR" +$filesize;" \
324 "cp.b $fdtaddr "CONFIG_FDT_ENV_ADDR" $filesize; " \
325 "cmp.b $fdtaddr "CONFIG_FDT_ENV_ADDR" $filesize; " \
326 "if test $? -ne 0; then " \
327 "echo FDT PROGRAM FAILED; " \
328 "else; " \
329 "echo FDT PROGRAM SUCCEEDED; " \
330 "fi; " \
331 "else; " \
332 "echo FDT DOWNLOAD FAILED; " \
333 "fi;"
334
335#define CONFIG_EXTRA_ENV_SETTINGS \
336 "autoload=yes\0" \
337 "download_cmd=tftp\0" \
338 "console_args=console=ttyS0,115200\0" \
339 "root_args=root=/dev/nfs rw\0" \
340 "misc_args=ip=on\0" \
341 "set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \
342 "bootfile=/home/user/file\0" \
Peter Tyserc00ac252010-10-22 00:20:26 -0500343 "osfile=/home/user/board.uImage\0" \
344 "fdtfile=/home/user/board.dtb\0" \
Peter Tyserc4ae1a02009-07-17 19:01:12 -0500345 "ubootfile=/home/user/u-boot.bin\0" \
346 "fdtaddr=c00000\0" \
347 "osaddr=0x1000000\0" \
348 "loadaddr=0x1000000\0" \
349 "prog_uboot="CONFIG_PROG_UBOOT"\0" \
350 "prog_os="CONFIG_PROG_OS"\0" \
351 "prog_fdt="CONFIG_PROG_FDT"\0" \
352 "bootcmd_net=run set_bootargs; "CONFIG_BOOT_OS_NET"\0" \
353 "bootcmd_flash=run set_bootargs; " \
354 "bootm "CONFIG_OS_ENV_ADDR" - "CONFIG_FDT_ENV_ADDR"\0" \
355 "bootcmd=run bootcmd_flash\0"
wdenkba56f622004-02-06 23:19:44 +0000356#endif /* __CONFIG_H */