wdenk | 1df49e2 | 2002-09-17 21:37:55 +0000 | [diff] [blame] | 1 | /* |
| 2 | * (C) Copyright 2001 |
| 3 | * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch. |
| 4 | * |
| 5 | * See file CREDITS for list of people who contributed to this |
| 6 | * project. |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or |
| 9 | * modify it under the terms of the GNU General Public License as |
| 10 | * published by the Free Software Foundation; either version 2 of |
| 11 | * the License, or (at your option) any later version. |
| 12 | * |
| 13 | * This program is distributed in the hope that it will be useful, |
| 14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 16 | * GNU General Public License for more details. |
| 17 | * |
| 18 | * You should have received a copy of the GNU General Public License |
| 19 | * along with this program; if not, write to the Free Software |
| 20 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| 21 | * MA 02111-1307 USA |
| 22 | * partly derived from |
| 23 | * linux/drivers/scsi/sym53c8xx.c |
| 24 | * |
| 25 | */ |
| 26 | |
| 27 | /* |
| 28 | * SCSI support based on the chip sym53C810. |
| 29 | * |
| 30 | * 09-19-2001 Andreas Heppel, Sysgo RTS GmbH <aheppel@sysgo.de> |
| 31 | * The local version of this driver for the BAB750 board does not |
| 32 | * use interrupts but polls the chip instead (see the call of |
| 33 | * 'handle_scsi_int()' in 'scsi_issue()'. |
| 34 | */ |
| 35 | |
| 36 | #include <common.h> |
| 37 | |
| 38 | #ifdef CONFIG_SCSI_SYM53C8XX |
| 39 | |
| 40 | #include <command.h> |
wdenk | 1df49e2 | 2002-09-17 21:37:55 +0000 | [diff] [blame] | 41 | #include <pci.h> |
| 42 | #include <asm/processor.h> |
| 43 | #include <sym53c8xx.h> |
| 44 | #include <scsi.h> |
| 45 | |
| 46 | #undef SYM53C8XX_DEBUG |
| 47 | |
| 48 | #ifdef SYM53C8XX_DEBUG |
| 49 | #define PRINTF(fmt,args...) printf (fmt ,##args) |
| 50 | #else |
| 51 | #define PRINTF(fmt,args...) |
| 52 | #endif |
| 53 | |
Jon Loeliger | cb51c0b | 2007-07-09 17:39:42 -0500 | [diff] [blame] | 54 | #if defined(CONFIG_CMD_SCSI) && defined(CONFIG_SCSI_SYM53C8XX) |
wdenk | 1df49e2 | 2002-09-17 21:37:55 +0000 | [diff] [blame] | 55 | |
| 56 | #undef SCSI_SINGLE_STEP |
| 57 | /* |
| 58 | * Single Step is only used for debug purposes |
| 59 | */ |
| 60 | #ifdef SCSI_SINGLE_STEP |
| 61 | static unsigned long start_script_select; |
| 62 | static unsigned long start_script_msgout; |
| 63 | static unsigned long start_script_msgin; |
| 64 | static unsigned long start_script_msg_ext; |
| 65 | static unsigned long start_script_cmd; |
| 66 | static unsigned long start_script_data_in; |
| 67 | static unsigned long start_script_data_out; |
| 68 | static unsigned long start_script_status; |
| 69 | static unsigned long start_script_complete; |
| 70 | static unsigned long start_script_error; |
| 71 | static unsigned long start_script_reselection; |
| 72 | static unsigned int len_script_select; |
| 73 | static unsigned int len_script_msgout; |
| 74 | static unsigned int len_script_msgin; |
| 75 | static unsigned int len_script_msg_ext; |
| 76 | static unsigned int len_script_cmd; |
| 77 | static unsigned int len_script_data_in; |
| 78 | static unsigned int len_script_data_out; |
| 79 | static unsigned int len_script_status; |
| 80 | static unsigned int len_script_complete; |
| 81 | static unsigned int len_script_error; |
| 82 | static unsigned int len_script_reselection; |
| 83 | #endif |
| 84 | |
| 85 | |
| 86 | static unsigned short scsi_int_mask; /* shadow register for SCSI related interrupts */ |
| 87 | static unsigned char script_int_mask; /* shadow register for SCRIPT related interrupts */ |
| 88 | static unsigned long script_select[8]; /* script for selection */ |
| 89 | static unsigned long script_msgout[8]; /* script for message out phase (NOT USED) */ |
| 90 | static unsigned long script_msgin[14]; /* script for message in phase */ |
| 91 | static unsigned long script_msg_ext[32]; /* script for message in phase when more than 1 byte message */ |
| 92 | static unsigned long script_cmd[18]; /* script for command phase */ |
| 93 | static unsigned long script_data_in[8]; /* script for data in phase */ |
| 94 | static unsigned long script_data_out[8]; /* script for data out phase */ |
| 95 | static unsigned long script_status[6]; /* script for status phase */ |
| 96 | static unsigned long script_complete[10]; /* script for complete */ |
| 97 | static unsigned long script_reselection[4]; /* script for reselection (NOT USED) */ |
| 98 | static unsigned long script_error[2]; /* script for error handling */ |
| 99 | |
| 100 | static unsigned long int_stat[3]; /* interrupt status */ |
| 101 | static unsigned long scsi_mem_addr; /* base memory address =SCSI_MEM_ADDRESS; */ |
| 102 | |
| 103 | #define bus_to_phys(a) pci_mem_to_phys(busdevfunc, (unsigned long) (a)) |
| 104 | #define phys_to_bus(a) pci_phys_to_mem(busdevfunc, (unsigned long) (a)) |
| 105 | |
| 106 | #define SCSI_MAX_RETRY 3 /* number of retries in scsi_issue() */ |
| 107 | |
| 108 | #define SCSI_MAX_RETRY_NOT_READY 10 /* number of retries when device is not ready */ |
| 109 | #define SCSI_NOT_READY_TIME_OUT 500 /* timeout per retry when not ready */ |
| 110 | |
| 111 | /********************************************************************************* |
| 112 | * forward declerations |
| 113 | */ |
| 114 | |
| 115 | void scsi_chip_init(void); |
| 116 | void handle_scsi_int(void); |
| 117 | |
| 118 | |
| 119 | /******************************************************************************** |
| 120 | * reports SCSI errors to the user |
| 121 | */ |
| 122 | void scsi_print_error(ccb *pccb) |
| 123 | { |
| 124 | int i; |
| 125 | printf("SCSI Error: Target %d LUN %d Command %02X\n",pccb->target, pccb->lun, pccb->cmd[0]); |
| 126 | printf(" CCB: "); |
| 127 | for(i=0;i<pccb->cmdlen;i++) |
| 128 | printf("%02X ",pccb->cmd[i]); |
| 129 | printf("(len=%d)\n",pccb->cmdlen); |
| 130 | printf(" Cntrl: "); |
| 131 | switch(pccb->contr_stat) { |
| 132 | case SIR_COMPLETE: printf("Complete (no Error)\n"); break; |
| 133 | case SIR_SEL_ATN_NO_MSG_OUT: printf("Selected with ATN no MSG out phase\n"); break; |
| 134 | case SIR_CMD_OUT_ILL_PH: printf("Command out illegal phase\n"); break; |
| 135 | case SIR_MSG_RECEIVED: printf("MSG received Error\n"); break; |
| 136 | case SIR_DATA_IN_ERR: printf("Data in Error\n"); break; |
| 137 | case SIR_DATA_OUT_ERR: printf("Data out Error\n"); break; |
| 138 | case SIR_SCRIPT_ERROR: printf("Script Error\n"); break; |
| 139 | case SIR_MSG_OUT_NO_CMD: printf("MSG out no Command phase\n"); break; |
| 140 | case SIR_MSG_OVER7: printf("MSG in over 7 bytes\n"); break; |
| 141 | case INT_ON_FY: printf("Interrupt on fly\n"); break; |
| 142 | case SCSI_SEL_TIME_OUT: printf("SCSI Selection Timeout\n"); break; |
| 143 | case SCSI_HNS_TIME_OUT: printf("SCSI Handshake Timeout\n"); break; |
| 144 | case SCSI_MA_TIME_OUT: printf("SCSI Phase Error\n"); break; |
| 145 | case SCSI_UNEXP_DIS: printf("SCSI unexpected disconnect\n"); break; |
| 146 | default: printf("unknown status %lx\n",pccb->contr_stat); break; |
| 147 | } |
| 148 | printf(" Sense: SK %x (",pccb->sense_buf[2]&0x0f); |
| 149 | switch(pccb->sense_buf[2]&0xf) { |
| 150 | case SENSE_NO_SENSE: printf("No Sense)"); break; |
| 151 | case SENSE_RECOVERED_ERROR: printf("Recovered Error)"); break; |
| 152 | case SENSE_NOT_READY: printf("Not Ready)"); break; |
| 153 | case SENSE_MEDIUM_ERROR: printf("Medium Error)"); break; |
| 154 | case SENSE_HARDWARE_ERROR: printf("Hardware Error)"); break; |
| 155 | case SENSE_ILLEGAL_REQUEST: printf("Illegal request)"); break; |
| 156 | case SENSE_UNIT_ATTENTION: printf("Unit Attention)"); break; |
| 157 | case SENSE_DATA_PROTECT: printf("Data Protect)"); break; |
| 158 | case SENSE_BLANK_CHECK: printf("Blank check)"); break; |
| 159 | case SENSE_VENDOR_SPECIFIC: printf("Vendor specific)"); break; |
| 160 | case SENSE_COPY_ABORTED: printf("Copy aborted)"); break; |
| 161 | case SENSE_ABORTED_COMMAND: printf("Aborted Command)"); break; |
| 162 | case SENSE_VOLUME_OVERFLOW: printf("Volume overflow)"); break; |
| 163 | case SENSE_MISCOMPARE: printf("Misscompare\n"); break; |
| 164 | default: printf("Illegal Sensecode\n"); break; |
| 165 | } |
| 166 | printf(" ASC %x ASCQ %x\n",pccb->sense_buf[12],pccb->sense_buf[13]); |
| 167 | printf(" Status: "); |
| 168 | switch(pccb->status) { |
| 169 | case S_GOOD : printf("Good\n"); break; |
| 170 | case S_CHECK_COND: printf("Check condition\n"); break; |
| 171 | case S_COND_MET: printf("Condition Met\n"); break; |
| 172 | case S_BUSY: printf("Busy\n"); break; |
| 173 | case S_INT: printf("Intermediate\n"); break; |
| 174 | case S_INT_COND_MET: printf("Intermediate condition met\n"); break; |
| 175 | case S_CONFLICT: printf("Reservation conflict\n"); break; |
| 176 | case S_TERMINATED: printf("Command terminated\n"); break; |
| 177 | case S_QUEUE_FULL: printf("Task set full\n"); break; |
| 178 | default: printf("unknown: %02X\n",pccb->status); break; |
| 179 | } |
| 180 | |
| 181 | } |
| 182 | |
| 183 | |
wdenk | 1df49e2 | 2002-09-17 21:37:55 +0000 | [diff] [blame] | 184 | /****************************************************************************** |
| 185 | * sets-up the SCSI controller |
| 186 | * the base memory address is retrived via the pci_read_config_dword |
| 187 | */ |
| 188 | void scsi_low_level_init(int busdevfunc) |
| 189 | { |
| 190 | unsigned int cmd; |
| 191 | unsigned int addr; |
| 192 | unsigned char vec; |
| 193 | |
| 194 | pci_read_config_byte(busdevfunc, PCI_INTERRUPT_LINE, &vec); |
| 195 | pci_read_config_dword(busdevfunc, PCI_BASE_ADDRESS_1, &addr); |
| 196 | |
| 197 | addr = bus_to_phys(addr & ~0xf); |
| 198 | |
| 199 | /* |
| 200 | * Enable bus mastering in case this has not been done, yet. |
| 201 | */ |
| 202 | pci_read_config_dword(busdevfunc, PCI_COMMAND, &cmd); |
| 203 | cmd |= PCI_COMMAND_MASTER; |
| 204 | pci_write_config_dword(busdevfunc, PCI_COMMAND, cmd); |
| 205 | |
| 206 | scsi_mem_addr = addr; |
| 207 | |
| 208 | scsi_chip_init(); |
| 209 | scsi_bus_reset(); |
| 210 | } |
| 211 | |
| 212 | |
| 213 | /************************************************************************************ |
| 214 | * Low level Part of SCSI Driver |
| 215 | */ |
| 216 | |
| 217 | /* |
| 218 | * big-endian -> little endian conversion for the script |
| 219 | */ |
| 220 | unsigned long swap_script(unsigned long val) |
| 221 | { |
| 222 | unsigned long tmp; |
| 223 | tmp = ((val>>24)&0xff) | ((val>>8)&0xff00) | ((val<<8)&0xff0000) | ((val<<24)&0xff000000); |
| 224 | return tmp; |
| 225 | } |
| 226 | |
| 227 | |
| 228 | void scsi_write_byte(ulong offset,unsigned char val) |
| 229 | { |
| 230 | out8(scsi_mem_addr+offset,val); |
| 231 | } |
| 232 | |
| 233 | |
| 234 | unsigned char scsi_read_byte(ulong offset) |
| 235 | { |
| 236 | return(in8(scsi_mem_addr+offset)); |
| 237 | } |
| 238 | |
| 239 | |
| 240 | /******************************************************************************** |
| 241 | * interrupt handler |
| 242 | */ |
| 243 | void handle_scsi_int(void) |
| 244 | { |
| 245 | unsigned char stat,stat1,stat2; |
| 246 | unsigned short sstat; |
| 247 | int i; |
| 248 | #ifdef SCSI_SINGLE_STEP |
| 249 | unsigned long tt; |
| 250 | #endif |
| 251 | stat=scsi_read_byte(ISTAT); |
| 252 | if((stat & DIP)==DIP) { /* DMA Interrupt pending */ |
| 253 | stat1=scsi_read_byte(DSTAT); |
| 254 | #ifdef SCSI_SINGLE_STEP |
| 255 | if((stat1 & SSI)==SSI) |
| 256 | { |
| 257 | tt=in32r(scsi_mem_addr+DSP); |
| 258 | if(((tt)>=start_script_select) && ((tt)<start_script_select+len_script_select)) { |
| 259 | printf("select %d\n",(tt-start_script_select)>>2); |
| 260 | goto end_single; |
| 261 | } |
| 262 | if(((tt)>=start_script_msgout) && ((tt)<start_script_msgout+len_script_msgout)) { |
| 263 | printf("msgout %d\n",(tt-start_script_msgout)>>2); |
| 264 | goto end_single; |
| 265 | } |
| 266 | if(((tt)>=start_script_msgin) && ((tt)<start_script_msgin+len_script_msgin)) { |
| 267 | printf("msgin %d\n",(tt-start_script_msgin)>>2); |
| 268 | goto end_single; |
| 269 | } |
| 270 | if(((tt)>=start_script_msg_ext) && ((tt)<start_script_msg_ext+len_script_msg_ext)) { |
| 271 | printf("msgin_ext %d\n",(tt-start_script_msg_ext)>>2); |
| 272 | goto end_single; |
| 273 | } |
| 274 | if(((tt)>=start_script_cmd) && ((tt)<start_script_cmd+len_script_cmd)) { |
| 275 | printf("cmd %d\n",(tt-start_script_cmd)>>2); |
| 276 | goto end_single; |
| 277 | } |
| 278 | if(((tt)>=start_script_data_in) && ((tt)<start_script_data_in+len_script_data_in)) { |
| 279 | printf("data_in %d\n",(tt-start_script_data_in)>>2); |
| 280 | goto end_single; |
| 281 | } |
| 282 | if(((tt)>=start_script_data_out) && ((tt)<start_script_data_out+len_script_data_out)) { |
| 283 | printf("data_out %d\n",(tt-start_script_data_out)>>2); |
| 284 | goto end_single; |
| 285 | } |
| 286 | if(((tt)>=start_script_status) && ((tt)<start_script_status+len_script_status)) { |
| 287 | printf("status %d\n",(tt-start_script_status)>>2); |
| 288 | goto end_single; |
| 289 | } |
| 290 | if(((tt)>=start_script_complete) && ((tt)<start_script_complete+len_script_complete)) { |
| 291 | printf("complete %d\n",(tt-start_script_complete)>>2); |
| 292 | goto end_single; |
| 293 | } |
| 294 | if(((tt)>=start_script_error) && ((tt)<start_script_error+len_script_error)) { |
| 295 | printf("error %d\n",(tt-start_script_error)>>2); |
| 296 | goto end_single; |
| 297 | } |
| 298 | if(((tt)>=start_script_reselection) && ((tt)<start_script_reselection+len_script_reselection)) { |
| 299 | printf("reselection %d\n",(tt-start_script_reselection)>>2); |
| 300 | goto end_single; |
| 301 | } |
| 302 | printf("sc: %lx\n",tt); |
| 303 | end_single: |
| 304 | stat2=scsi_read_byte(DCNTL); |
| 305 | stat2|=STD; |
| 306 | scsi_write_byte(DCNTL,stat2); |
| 307 | } |
| 308 | #endif |
| 309 | if((stat1 & SIR)==SIR) /* script interrupt */ |
| 310 | { |
| 311 | int_stat[0]=in32(scsi_mem_addr+DSPS); |
| 312 | } |
| 313 | if((stat1 & DFE)==0) { /* fifo not epmty */ |
| 314 | scsi_write_byte(CTEST3,CLF); /* Clear DMA FIFO */ |
| 315 | stat2=scsi_read_byte(STEST3); |
| 316 | scsi_write_byte(STEST3,(stat2 | CSF)); /* Clear SCSI FIFO */ |
| 317 | } |
| 318 | } |
| 319 | if((stat & SIP)==SIP) { /* scsi interrupt */ |
| 320 | sstat = (unsigned short)scsi_read_byte(SIST+1); |
| 321 | sstat <<=8; |
| 322 | sstat |= (unsigned short)scsi_read_byte(SIST); |
| 323 | for(i=0;i<3;i++) { |
| 324 | if(int_stat[i]==0) |
| 325 | break; /* found an empty int status */ |
| 326 | } |
| 327 | int_stat[i]=SCSI_INT_STATE | sstat; |
| 328 | stat1=scsi_read_byte(DSTAT); |
| 329 | if((stat1 & DFE)==0) { /* fifo not epmty */ |
| 330 | scsi_write_byte(CTEST3,CLF); /* Clear DMA FIFO */ |
| 331 | stat2=scsi_read_byte(STEST3); |
| 332 | scsi_write_byte(STEST3,(stat2 | CSF)); /* Clear SCSI FIFO */ |
| 333 | } |
| 334 | } |
| 335 | if((stat & INTF)==INTF) { /* interrupt on Fly */ |
| 336 | scsi_write_byte(ISTAT,stat); /* clear it */ |
| 337 | for(i=0;i<3;i++) { |
| 338 | if(int_stat[i]==0) |
| 339 | break; /* found an empty int status */ |
| 340 | } |
| 341 | int_stat[i]=INT_ON_FY; |
| 342 | } |
| 343 | } |
| 344 | |
| 345 | void scsi_bus_reset(void) |
| 346 | { |
| 347 | unsigned char t; |
| 348 | int i; |
| 349 | int end = CFG_SCSI_SPIN_UP_TIME*1000; |
| 350 | |
| 351 | t=scsi_read_byte(SCNTL1); |
| 352 | scsi_write_byte(SCNTL1,(t | CRST)); |
| 353 | udelay(50); |
| 354 | scsi_write_byte(SCNTL1,t); |
| 355 | |
| 356 | puts("waiting for devices to spin up"); |
| 357 | for(i=0;i<end;i++) { |
| 358 | udelay(1000); /* give the devices time to spin up */ |
| 359 | if (i % 1000 == 0) |
| 360 | putc('.'); |
| 361 | } |
| 362 | putc('\n'); |
| 363 | scsi_chip_init(); /* reinit the chip ...*/ |
| 364 | |
| 365 | } |
| 366 | |
| 367 | void scsi_int_enable(void) |
| 368 | { |
| 369 | scsi_write_byte(SIEN,(unsigned char)scsi_int_mask); |
| 370 | scsi_write_byte(SIEN+1,(unsigned char)(scsi_int_mask>>8)); |
| 371 | scsi_write_byte(DIEN,script_int_mask); |
| 372 | } |
| 373 | |
| 374 | void scsi_write_dsp(unsigned long start) |
| 375 | { |
| 376 | unsigned long val; |
| 377 | #ifdef SCSI_SINGLE_STEP |
| 378 | unsigned char t; |
| 379 | #endif |
| 380 | val = start; |
| 381 | out32r(scsi_mem_addr + DSP,start); |
| 382 | #ifdef SCSI_SINGLE_STEP |
| 383 | t=scsi_read_byte(DCNTL); |
| 384 | t|=STD; |
| 385 | scsi_write_byte(DCNTL,t); |
| 386 | #endif |
| 387 | } |
| 388 | |
| 389 | /* only used for debug purposes */ |
| 390 | void scsi_print_script(void) |
| 391 | { |
| 392 | printf("script_select @ 0x%08lX\n",(unsigned long)&script_select[0]); |
| 393 | printf("script_msgout @ 0x%08lX\n",(unsigned long)&script_msgout[0]); |
| 394 | printf("script_msgin @ 0x%08lX\n",(unsigned long)&script_msgin[0]); |
| 395 | printf("script_msgext @ 0x%08lX\n",(unsigned long)&script_msg_ext[0]); |
| 396 | printf("script_cmd @ 0x%08lX\n",(unsigned long)&script_cmd[0]); |
| 397 | printf("script_data_in @ 0x%08lX\n",(unsigned long)&script_data_in[0]); |
| 398 | printf("script_data_out @ 0x%08lX\n",(unsigned long)&script_data_out[0]); |
| 399 | printf("script_status @ 0x%08lX\n",(unsigned long)&script_status[0]); |
| 400 | printf("script_complete @ 0x%08lX\n",(unsigned long)&script_complete[0]); |
| 401 | printf("script_error @ 0x%08lX\n",(unsigned long)&script_error[0]); |
| 402 | } |
| 403 | |
| 404 | |
wdenk | 1df49e2 | 2002-09-17 21:37:55 +0000 | [diff] [blame] | 405 | void scsi_set_script(ccb *pccb) |
| 406 | { |
| 407 | int busdevfunc = pccb->priv; |
| 408 | int i; |
| 409 | i=0; |
| 410 | script_select[i++]=swap_script(SCR_REG_REG(GPREG, SCR_AND, 0xfe)); |
| 411 | script_select[i++]=0; /* LED ON */ |
| 412 | script_select[i++]=swap_script(SCR_CLR(SCR_TRG)); /* select initiator mode */ |
| 413 | script_select[i++]=0; |
| 414 | /* script_select[i++]=swap_script(SCR_SEL_ABS_ATN | pccb->target << 16); */ |
| 415 | script_select[i++]=swap_script(SCR_SEL_ABS | pccb->target << 16); |
| 416 | script_select[i++]=swap_script(phys_to_bus(&script_cmd[4])); /* error handling */ |
| 417 | script_select[i++]=swap_script(SCR_JUMP); /* next section */ |
| 418 | /* script_select[i++]=swap_script((unsigned long)&script_msgout[0]); */ /* message out */ |
| 419 | script_select[i++]=swap_script(phys_to_bus(&script_cmd[0])); /* command out */ |
| 420 | |
| 421 | #ifdef SCSI_SINGLE_STEP |
| 422 | start_script_select=(unsigned long)&script_select[0]; |
| 423 | len_script_select=i*4; |
| 424 | #endif |
| 425 | |
| 426 | i=0; |
| 427 | script_msgout[i++]=swap_script(SCR_INT ^ IFFALSE (WHEN (SCR_MSG_OUT))); |
| 428 | script_msgout[i++]=SIR_SEL_ATN_NO_MSG_OUT; |
| 429 | script_msgout[i++]=swap_script( SCR_MOVE_ABS(1) ^ SCR_MSG_OUT); |
| 430 | script_msgout[i++]=swap_script(phys_to_bus(&pccb->msgout[0])); |
| 431 | script_msgout[i++]=swap_script(SCR_JUMP ^ IFTRUE (WHEN (SCR_COMMAND))); /* if Command phase */ |
| 432 | script_msgout[i++]=swap_script(phys_to_bus(&script_cmd[0])); /* switch to command */ |
| 433 | script_msgout[i++]=swap_script(SCR_INT); /* interrupt if not */ |
| 434 | script_msgout[i++]=SIR_MSG_OUT_NO_CMD; |
| 435 | |
| 436 | #ifdef SCSI_SINGLE_STEP |
| 437 | start_script_msgout=(unsigned long)&script_msgout[0]; |
| 438 | len_script_msgout=i*4; |
| 439 | #endif |
| 440 | i=0; |
| 441 | script_cmd[i++]=swap_script(SCR_MOVE_ABS(pccb->cmdlen) ^ SCR_COMMAND); |
| 442 | script_cmd[i++]=swap_script(phys_to_bus(&pccb->cmd[0])); |
| 443 | script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_IN))); /* message in ? */ |
| 444 | script_cmd[i++]=swap_script(phys_to_bus(&script_msgin[0])); |
| 445 | script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_DATA_OUT))); /* data out ? */ |
| 446 | script_cmd[i++]=swap_script(phys_to_bus(&script_data_out[0])); |
| 447 | script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_DATA_IN))); /* data in ? */ |
| 448 | script_cmd[i++]=swap_script(phys_to_bus(&script_data_in[0])); |
| 449 | script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_STATUS))); /* status ? */ |
| 450 | script_cmd[i++]=swap_script(phys_to_bus(&script_status[0])); |
| 451 | script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_COMMAND))); /* command ? */ |
| 452 | script_cmd[i++]=swap_script(phys_to_bus(&script_cmd[0])); |
| 453 | script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_MSG_OUT))); /* message out ? */ |
| 454 | script_cmd[i++]=swap_script(phys_to_bus(&script_msgout[0])); |
| 455 | script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_MSG_IN))); /* just for error handling message in ? */ |
| 456 | script_cmd[i++]=swap_script(phys_to_bus(&script_msgin[0])); |
| 457 | script_cmd[i++]=swap_script(SCR_INT); /* interrupt if not */ |
| 458 | script_cmd[i++]=SIR_CMD_OUT_ILL_PH; |
| 459 | #ifdef SCSI_SINGLE_STEP |
| 460 | start_script_cmd=(unsigned long)&script_cmd[0]; |
| 461 | len_script_cmd=i*4; |
| 462 | #endif |
| 463 | i=0; |
| 464 | script_data_out[i++]=swap_script(SCR_MOVE_ABS(pccb->datalen)^ SCR_DATA_OUT); /* move */ |
| 465 | script_data_out[i++]=swap_script(phys_to_bus(pccb->pdata)); /* pointer to buffer */ |
| 466 | script_data_out[i++]=swap_script(SCR_JUMP ^ IFTRUE (WHEN (SCR_STATUS))); |
| 467 | script_data_out[i++]=swap_script(phys_to_bus(&script_status[0])); |
| 468 | script_data_out[i++]=swap_script(SCR_INT); |
| 469 | script_data_out[i++]=SIR_DATA_OUT_ERR; |
| 470 | |
| 471 | #ifdef SCSI_SINGLE_STEP |
| 472 | start_script_data_out=(unsigned long)&script_data_out[0]; |
| 473 | len_script_data_out=i*4; |
| 474 | #endif |
| 475 | i=0; |
| 476 | script_data_in[i++]=swap_script(SCR_MOVE_ABS(pccb->datalen)^ SCR_DATA_IN); /* move */ |
| 477 | script_data_in[i++]=swap_script(phys_to_bus(pccb->pdata)); /* pointer to buffer */ |
| 478 | script_data_in[i++]=swap_script(SCR_JUMP ^ IFTRUE (WHEN (SCR_STATUS))); |
| 479 | script_data_in[i++]=swap_script(phys_to_bus(&script_status[0])); |
| 480 | script_data_in[i++]=swap_script(SCR_INT); |
| 481 | script_data_in[i++]=SIR_DATA_IN_ERR; |
| 482 | #ifdef SCSI_SINGLE_STEP |
| 483 | start_script_data_in=(unsigned long)&script_data_in[0]; |
| 484 | len_script_data_in=i*4; |
| 485 | #endif |
| 486 | i=0; |
| 487 | script_msgin[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); |
| 488 | script_msgin[i++]=swap_script(phys_to_bus(&pccb->msgin[0])); |
| 489 | script_msgin[i++]=swap_script(SCR_JUMP ^ IFTRUE (DATA (M_COMPLETE))); |
| 490 | script_msgin[i++]=swap_script(phys_to_bus(&script_complete[0])); |
| 491 | script_msgin[i++]=swap_script(SCR_JUMP ^ IFTRUE (DATA (M_DISCONNECT))); |
| 492 | script_msgin[i++]=swap_script(phys_to_bus(&script_complete[0])); |
| 493 | script_msgin[i++]=swap_script(SCR_JUMP ^ IFTRUE (DATA (M_SAVE_DP))); |
| 494 | script_msgin[i++]=swap_script(phys_to_bus(&script_complete[0])); |
| 495 | script_msgin[i++]=swap_script(SCR_JUMP ^ IFTRUE (DATA (M_RESTORE_DP))); |
| 496 | script_msgin[i++]=swap_script(phys_to_bus(&script_complete[0])); |
| 497 | script_msgin[i++]=swap_script(SCR_JUMP ^ IFTRUE (DATA (M_EXTENDED))); |
| 498 | script_msgin[i++]=swap_script(phys_to_bus(&script_msg_ext[0])); |
| 499 | script_msgin[i++]=swap_script(SCR_INT); |
| 500 | script_msgin[i++]=SIR_MSG_RECEIVED; |
| 501 | #ifdef SCSI_SINGLE_STEP |
| 502 | start_script_msgin=(unsigned long)&script_msgin[0]; |
| 503 | len_script_msgin=i*4; |
| 504 | #endif |
| 505 | i=0; |
| 506 | script_msg_ext[i++]=swap_script(SCR_CLR (SCR_ACK)); /* clear ACK */ |
| 507 | script_msg_ext[i++]=0; |
| 508 | script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* assuming this is the msg length */ |
| 509 | script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[1])); |
| 510 | script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN))); |
| 511 | script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */ |
| 512 | script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */ |
| 513 | script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[2])); |
| 514 | script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN))); |
| 515 | script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */ |
| 516 | script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */ |
| 517 | script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[3])); |
| 518 | script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN))); |
| 519 | script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */ |
| 520 | script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */ |
| 521 | script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[4])); |
| 522 | script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN))); |
| 523 | script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */ |
| 524 | script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */ |
| 525 | script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[5])); |
| 526 | script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN))); |
| 527 | script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */ |
| 528 | script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */ |
| 529 | script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[6])); |
| 530 | script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN))); |
| 531 | script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */ |
| 532 | script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */ |
| 533 | script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[7])); |
| 534 | script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN))); |
| 535 | script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */ |
| 536 | script_msg_ext[i++]=swap_script(SCR_INT); |
| 537 | script_msg_ext[i++]=SIR_MSG_OVER7; |
| 538 | #ifdef SCSI_SINGLE_STEP |
| 539 | start_script_msg_ext=(unsigned long)&script_msg_ext[0]; |
| 540 | len_script_msg_ext=i*4; |
| 541 | #endif |
| 542 | i=0; |
| 543 | script_status[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_STATUS); |
| 544 | script_status[i++]=swap_script(phys_to_bus(&pccb->status)); |
| 545 | script_status[i++]=swap_script(SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_IN))); |
| 546 | script_status[i++]=swap_script(phys_to_bus(&script_msgin[0])); |
| 547 | script_status[i++]=swap_script(SCR_INT); |
| 548 | script_status[i++]=SIR_STATUS_ILL_PH; |
| 549 | #ifdef SCSI_SINGLE_STEP |
| 550 | start_script_status=(unsigned long)&script_status[0]; |
| 551 | len_script_status=i*4; |
| 552 | #endif |
| 553 | i=0; |
| 554 | script_complete[i++]=swap_script(SCR_REG_REG (SCNTL2, SCR_AND, 0x7f)); |
| 555 | script_complete[i++]=0; |
| 556 | script_complete[i++]=swap_script(SCR_CLR (SCR_ACK|SCR_ATN)); |
| 557 | script_complete[i++]=0; |
| 558 | script_complete[i++]=swap_script(SCR_WAIT_DISC); |
| 559 | script_complete[i++]=0; |
| 560 | script_complete[i++]=swap_script(SCR_REG_REG(GPREG, SCR_OR, 0x01)); |
| 561 | script_complete[i++]=0; /* LED OFF */ |
| 562 | script_complete[i++]=swap_script(SCR_INT); |
| 563 | script_complete[i++]=SIR_COMPLETE; |
| 564 | #ifdef SCSI_SINGLE_STEP |
| 565 | start_script_complete=(unsigned long)&script_complete[0]; |
| 566 | len_script_complete=i*4; |
| 567 | #endif |
| 568 | i=0; |
| 569 | script_error[i++]=swap_script(SCR_INT); /* interrupt if error */ |
| 570 | script_error[i++]=SIR_SCRIPT_ERROR; |
| 571 | #ifdef SCSI_SINGLE_STEP |
| 572 | start_script_error=(unsigned long)&script_error[0]; |
| 573 | len_script_error=i*4; |
| 574 | #endif |
| 575 | i=0; |
| 576 | script_reselection[i++]=swap_script(SCR_CLR (SCR_TRG)); /* target status */ |
| 577 | script_reselection[i++]=0; |
| 578 | script_reselection[i++]=swap_script(SCR_WAIT_RESEL); |
| 579 | script_reselection[i++]=swap_script(phys_to_bus(&script_select[0])); /* len = 4 */ |
| 580 | #ifdef SCSI_SINGLE_STEP |
| 581 | start_script_reselection=(unsigned long)&script_reselection[0]; |
| 582 | len_script_reselection=i*4; |
| 583 | #endif |
| 584 | } |
| 585 | |
| 586 | |
wdenk | 1df49e2 | 2002-09-17 21:37:55 +0000 | [diff] [blame] | 587 | void scsi_issue(ccb *pccb) |
| 588 | { |
| 589 | int busdevfunc = pccb->priv; |
| 590 | int i; |
| 591 | unsigned short sstat; |
| 592 | int retrycnt; /* retry counter */ |
| 593 | for(i=0;i<3;i++) |
| 594 | int_stat[i]=0; /* delete all int status */ |
| 595 | /* struct pccb must be set-up correctly */ |
| 596 | retrycnt=0; |
| 597 | PRINTF("ID %d issue cmd %02X\n",pccb->target,pccb->cmd[0]); |
| 598 | pccb->trans_bytes=0; /* no bytes transfered yet */ |
| 599 | scsi_set_script(pccb); /* fill in SCRIPT */ |
| 600 | scsi_int_mask=STO | UDC | MA; /* | CMP; / * Interrupts which are enabled */ |
| 601 | script_int_mask=0xff; /* enable all Ints */ |
| 602 | scsi_int_enable(); |
| 603 | scsi_write_dsp(phys_to_bus(&script_select[0])); /* start script */ |
| 604 | /* now we have to wait for IRQs */ |
| 605 | retry: |
| 606 | /* |
| 607 | * This version of the driver is _not_ interrupt driven, |
| 608 | * but polls the chip's interrupt registers (ISTAT, DSTAT). |
| 609 | */ |
| 610 | while(int_stat[0]==0) |
| 611 | handle_scsi_int(); |
| 612 | |
| 613 | if(int_stat[0]==SIR_COMPLETE) { |
| 614 | if(pccb->msgin[0]==M_DISCONNECT) { |
| 615 | PRINTF("Wait for reselection\n"); |
| 616 | for(i=0;i<3;i++) |
| 617 | int_stat[i]=0; /* delete all int status */ |
| 618 | scsi_write_dsp(phys_to_bus(&script_reselection[0])); /* start reselection script */ |
| 619 | goto retry; |
| 620 | } |
| 621 | pccb->contr_stat=SIR_COMPLETE; |
| 622 | return; |
| 623 | } |
| 624 | if((int_stat[0] & SCSI_INT_STATE)==SCSI_INT_STATE) { /* scsi interrupt */ |
| 625 | sstat=(unsigned short)int_stat[0]; |
| 626 | if((sstat & STO)==STO) { /* selection timeout */ |
| 627 | pccb->contr_stat=SCSI_SEL_TIME_OUT; |
| 628 | scsi_write_byte(GPREG,0x01); |
| 629 | PRINTF("ID: %X Selection Timeout\n",pccb->target); |
| 630 | return; |
| 631 | } |
| 632 | if((sstat & UDC)==UDC) { /* unexpected disconnect */ |
| 633 | pccb->contr_stat=SCSI_UNEXP_DIS; |
| 634 | scsi_write_byte(GPREG,0x01); |
| 635 | PRINTF("ID: %X Unexpected Disconnect\n",pccb->target); |
| 636 | return; |
| 637 | } |
| 638 | if((sstat & RSL)==RSL) { /* reselection */ |
| 639 | pccb->contr_stat=SCSI_UNEXP_DIS; |
| 640 | scsi_write_byte(GPREG,0x01); |
| 641 | PRINTF("ID: %X Unexpected Disconnect\n",pccb->target); |
| 642 | return; |
| 643 | } |
| 644 | if(((sstat & MA)==MA)||((sstat & HTH)==HTH)) { /* phase missmatch */ |
| 645 | if(retrycnt<SCSI_MAX_RETRY) { |
| 646 | pccb->trans_bytes=pccb->datalen - |
| 647 | ((unsigned long)scsi_read_byte(DBC) | |
| 648 | ((unsigned long)scsi_read_byte(DBC+1)<<8) | |
| 649 | ((unsigned long)scsi_read_byte(DBC+2)<<16)); |
| 650 | for(i=0;i<3;i++) |
| 651 | int_stat[i]=0; /* delete all int status */ |
| 652 | retrycnt++; |
| 653 | PRINTF("ID: %X Phase Missmatch Retry %d Phase %02X transfered %lx\n", |
| 654 | pccb->target,retrycnt,scsi_read_byte(SBCL),pccb->trans_bytes); |
| 655 | scsi_write_dsp(phys_to_bus(&script_cmd[4])); /* start retry script */ |
| 656 | goto retry; |
| 657 | } |
| 658 | if((sstat & MA)==MA) |
| 659 | pccb->contr_stat=SCSI_MA_TIME_OUT; |
| 660 | else |
| 661 | pccb->contr_stat=SCSI_HNS_TIME_OUT; |
| 662 | PRINTF("Phase Missmatch stat %lx\n",pccb->contr_stat); |
| 663 | return; |
| 664 | } /* no phase int */ |
| 665 | /* if((sstat & CMP)==CMP) { |
| 666 | pccb->contr_stat=SIR_COMPLETE; |
| 667 | return; |
| 668 | } |
| 669 | */ |
| 670 | PRINTF("SCSI INT %lX\n",int_stat[0]); |
| 671 | pccb->contr_stat=int_stat[0]; |
| 672 | return; |
| 673 | } /* end scsi int */ |
| 674 | PRINTF("SCRIPT INT %lX phase %02X\n",int_stat[0],scsi_read_byte(SBCL)); |
| 675 | pccb->contr_stat=int_stat[0]; |
| 676 | return; |
| 677 | } |
| 678 | |
| 679 | int scsi_exec(ccb *pccb) |
| 680 | { |
| 681 | unsigned char tmpcmd[16],tmpstat; |
| 682 | int i,retrycnt,t; |
| 683 | unsigned long transbytes,datalen; |
| 684 | unsigned char *tmpptr; |
| 685 | retrycnt=0; |
| 686 | retry: |
| 687 | scsi_issue(pccb); |
| 688 | if(pccb->contr_stat!=SIR_COMPLETE) |
| 689 | return FALSE; |
| 690 | if(pccb->status==S_GOOD) |
| 691 | return TRUE; |
| 692 | if(pccb->status==S_CHECK_COND) { /* check condition */ |
| 693 | for(i=0;i<16;i++) |
| 694 | tmpcmd[i]=pccb->cmd[i]; |
| 695 | pccb->cmd[0]=SCSI_REQ_SENSE; |
| 696 | pccb->cmd[1]=pccb->lun<<5; |
| 697 | pccb->cmd[2]=0; |
| 698 | pccb->cmd[3]=0; |
| 699 | pccb->cmd[4]=14; |
| 700 | pccb->cmd[5]=0; |
| 701 | pccb->cmdlen=6; |
| 702 | pccb->msgout[0]=SCSI_IDENTIFY; |
| 703 | transbytes=pccb->trans_bytes; |
| 704 | tmpptr=pccb->pdata; |
| 705 | pccb->pdata=&pccb->sense_buf[0]; |
| 706 | datalen=pccb->datalen; |
| 707 | pccb->datalen=14; |
| 708 | tmpstat=pccb->status; |
| 709 | scsi_issue(pccb); |
| 710 | for(i=0;i<16;i++) |
| 711 | pccb->cmd[i]=tmpcmd[i]; |
| 712 | pccb->trans_bytes=transbytes; |
| 713 | pccb->pdata=tmpptr; |
| 714 | pccb->datalen=datalen; |
| 715 | pccb->status=tmpstat; |
| 716 | PRINTF("Request_sense sense key %x ASC %x ASCQ %x\n",pccb->sense_buf[2]&0x0f, |
| 717 | pccb->sense_buf[12],pccb->sense_buf[13]); |
| 718 | switch(pccb->sense_buf[2]&0xf) { |
| 719 | case SENSE_NO_SENSE: |
| 720 | case SENSE_RECOVERED_ERROR: |
| 721 | /* seems to be ok */ |
| 722 | return TRUE; |
| 723 | break; |
| 724 | case SENSE_NOT_READY: |
| 725 | if((pccb->sense_buf[12]!=0x04)||(pccb->sense_buf[13]!=0x01)) { |
| 726 | /* if device is not in process of becoming ready */ |
| 727 | return FALSE; |
| 728 | break; |
| 729 | } /* else fall through */ |
| 730 | case SENSE_UNIT_ATTENTION: |
| 731 | if(retrycnt<SCSI_MAX_RETRY_NOT_READY) { |
| 732 | PRINTF("Target %d not ready, retry %d\n",pccb->target,retrycnt); |
| 733 | for(t=0;t<SCSI_NOT_READY_TIME_OUT;t++) |
| 734 | udelay(1000); /* 1sec wait */ |
| 735 | retrycnt++; |
| 736 | goto retry; |
| 737 | } |
| 738 | PRINTF("Target %d not ready, %d retried\n",pccb->target,retrycnt); |
| 739 | return FALSE; |
| 740 | default: |
| 741 | return FALSE; |
| 742 | } |
| 743 | } |
| 744 | PRINTF("Status = %X\n",pccb->status); |
| 745 | return FALSE; |
| 746 | } |
| 747 | |
| 748 | |
wdenk | 1df49e2 | 2002-09-17 21:37:55 +0000 | [diff] [blame] | 749 | void scsi_chip_init(void) |
| 750 | { |
| 751 | /* first we issue a soft reset */ |
| 752 | scsi_write_byte(ISTAT,SRST); |
| 753 | udelay(1000); |
| 754 | scsi_write_byte(ISTAT,0); |
| 755 | /* setup chip */ |
| 756 | scsi_write_byte(SCNTL0,0xC0); /* full arbitration no start, no message, parity disabled, master */ |
| 757 | scsi_write_byte(SCNTL1,0x00); |
| 758 | scsi_write_byte(SCNTL2,0x00); |
| 759 | #ifndef CFG_SCSI_SYM53C8XX_CCF /* config value for none 40 mhz clocks */ |
| 760 | scsi_write_byte(SCNTL3,0x13); /* synchronous clock 40/4=10MHz, asynchronous 40MHz */ |
| 761 | #else |
| 762 | scsi_write_byte(SCNTL3,CFG_SCSI_SYM53C8XX_CCF); /* config value for none 40 mhz clocks */ |
| 763 | #endif |
| 764 | scsi_write_byte(SCID,0x47); /* ID=7, enable reselection */ |
| 765 | scsi_write_byte(SXFER,0x00); /* synchronous transfer period 10MHz, asynchronous */ |
| 766 | scsi_write_byte(SDID,0x00); /* targed SCSI ID = 0 */ |
| 767 | scsi_int_mask=0x0000; /* no Interrupt is enabled */ |
| 768 | script_int_mask=0x00; |
| 769 | scsi_int_enable(); |
| 770 | scsi_write_byte(GPREG,0x01); /* GPIO0 is LED (off) */ |
| 771 | scsi_write_byte(GPCNTL,0x0E); /* GPIO0 is Output */ |
| 772 | scsi_write_byte(STIME0,0x08); /* handshake timer disabled, selection timeout 512msec */ |
| 773 | scsi_write_byte(RESPID,0x80); /* repond only to the own ID (reselection) */ |
| 774 | scsi_write_byte(STEST1,0x00); /* not isolated, SCLK is used */ |
| 775 | scsi_write_byte(STEST2,0x00); /* no Lowlevel Mode? */ |
| 776 | scsi_write_byte(STEST3,0x80); /* enable tolerANT */ |
| 777 | scsi_write_byte(CTEST3,0x04); /* clear FIFO */ |
| 778 | scsi_write_byte(CTEST4,0x00); |
| 779 | scsi_write_byte(CTEST5,0x00); |
| 780 | #ifdef SCSI_SINGLE_STEP |
| 781 | /* scsi_write_byte(DCNTL,IRQM | SSM); */ |
| 782 | scsi_write_byte(DCNTL,IRQD | SSM); |
| 783 | scsi_write_byte(DMODE,MAN); |
| 784 | #else |
| 785 | /* scsi_write_byte(DCNTL,IRQM); */ |
| 786 | scsi_write_byte(DCNTL,IRQD); |
| 787 | scsi_write_byte(DMODE,0x00); |
| 788 | #endif |
| 789 | } |
Jon Loeliger | cb51c0b | 2007-07-09 17:39:42 -0500 | [diff] [blame] | 790 | #endif |
wdenk | 1df49e2 | 2002-09-17 21:37:55 +0000 | [diff] [blame] | 791 | |
| 792 | |
| 793 | #endif /* CONFIG_SCSI_SYM53C8XX */ |