Yannick Fertré | 06ef131 | 2019-10-07 15:29:09 +0200 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
| 2 | /* |
| 3 | * Copyright (C) 2019 STMicroelectronics - All Rights Reserved |
| 4 | * Author(s): Yannick Fertre <yannick.fertre@st.com> for STMicroelectronics. |
| 5 | * Philippe Cornu <philippe.cornu@st.com> for STMicroelectronics. |
| 6 | * |
| 7 | * This rm68200 panel driver is inspired from the Linux Kernel driver |
| 8 | * drivers/gpu/drm/panel/panel-raydium-rm68200.c. |
| 9 | */ |
| 10 | #include <common.h> |
| 11 | #include <backlight.h> |
| 12 | #include <dm.h> |
| 13 | #include <mipi_dsi.h> |
| 14 | #include <panel.h> |
| 15 | #include <asm/gpio.h> |
| 16 | #include <power/regulator.h> |
| 17 | |
| 18 | /*** Manufacturer Command Set ***/ |
| 19 | #define MCS_CMD_MODE_SW 0xFE /* CMD Mode Switch */ |
| 20 | #define MCS_CMD1_UCS 0x00 /* User Command Set (UCS = CMD1) */ |
| 21 | #define MCS_CMD2_P0 0x01 /* Manufacture Command Set Page0 (CMD2 P0) */ |
| 22 | #define MCS_CMD2_P1 0x02 /* Manufacture Command Set Page1 (CMD2 P1) */ |
| 23 | #define MCS_CMD2_P2 0x03 /* Manufacture Command Set Page2 (CMD2 P2) */ |
| 24 | #define MCS_CMD2_P3 0x04 /* Manufacture Command Set Page3 (CMD2 P3) */ |
| 25 | |
| 26 | /* CMD2 P0 commands (Display Options and Power) */ |
| 27 | #define MCS_STBCTR 0x12 /* TE1 Output Setting Zig-Zag Connection */ |
| 28 | #define MCS_SGOPCTR 0x16 /* Source Bias Current */ |
| 29 | #define MCS_SDCTR 0x1A /* Source Output Delay Time */ |
| 30 | #define MCS_INVCTR 0x1B /* Inversion Type */ |
| 31 | #define MCS_EXT_PWR_IC 0x24 /* External PWR IC Control */ |
| 32 | #define MCS_SETAVDD 0x27 /* PFM Control for AVDD Output */ |
| 33 | #define MCS_SETAVEE 0x29 /* PFM Control for AVEE Output */ |
| 34 | #define MCS_BT2CTR 0x2B /* DDVDL Charge Pump Control */ |
| 35 | #define MCS_BT3CTR 0x2F /* VGH Charge Pump Control */ |
| 36 | #define MCS_BT4CTR 0x34 /* VGL Charge Pump Control */ |
| 37 | #define MCS_VCMCTR 0x46 /* VCOM Output Level Control */ |
| 38 | #define MCS_SETVGN 0x52 /* VG M/S N Control */ |
| 39 | #define MCS_SETVGP 0x54 /* VG M/S P Control */ |
| 40 | #define MCS_SW_CTRL 0x5F /* Interface Control for PFM and MIPI */ |
| 41 | |
| 42 | /* CMD2 P2 commands (GOA Timing Control) - no description in datasheet */ |
| 43 | #define GOA_VSTV1 0x00 |
| 44 | #define GOA_VSTV2 0x07 |
| 45 | #define GOA_VCLK1 0x0E |
| 46 | #define GOA_VCLK2 0x17 |
| 47 | #define GOA_VCLK_OPT1 0x20 |
| 48 | #define GOA_BICLK1 0x2A |
| 49 | #define GOA_BICLK2 0x37 |
| 50 | #define GOA_BICLK3 0x44 |
| 51 | #define GOA_BICLK4 0x4F |
| 52 | #define GOA_BICLK_OPT1 0x5B |
| 53 | #define GOA_BICLK_OPT2 0x60 |
| 54 | #define MCS_GOA_GPO1 0x6D |
| 55 | #define MCS_GOA_GPO2 0x71 |
| 56 | #define MCS_GOA_EQ 0x74 |
| 57 | #define MCS_GOA_CLK_GALLON 0x7C |
| 58 | #define MCS_GOA_FS_SEL0 0x7E |
| 59 | #define MCS_GOA_FS_SEL1 0x87 |
| 60 | #define MCS_GOA_FS_SEL2 0x91 |
| 61 | #define MCS_GOA_FS_SEL3 0x9B |
| 62 | #define MCS_GOA_BS_SEL0 0xAC |
| 63 | #define MCS_GOA_BS_SEL1 0xB5 |
| 64 | #define MCS_GOA_BS_SEL2 0xBF |
| 65 | #define MCS_GOA_BS_SEL3 0xC9 |
| 66 | #define MCS_GOA_BS_SEL4 0xD3 |
| 67 | |
| 68 | /* CMD2 P3 commands (Gamma) */ |
| 69 | #define MCS_GAMMA_VP 0x60 /* Gamma VP1~VP16 */ |
| 70 | #define MCS_GAMMA_VN 0x70 /* Gamma VN1~VN16 */ |
| 71 | |
| 72 | struct rm68200_panel_priv { |
| 73 | struct udevice *reg; |
| 74 | struct udevice *backlight; |
| 75 | struct gpio_desc reset; |
| 76 | unsigned int lanes; |
| 77 | enum mipi_dsi_pixel_format format; |
| 78 | unsigned long mode_flags; |
| 79 | }; |
| 80 | |
| 81 | static const struct display_timing default_timing = { |
| 82 | .pixelclock.typ = 54000000, |
| 83 | .hactive.typ = 720, |
| 84 | .hfront_porch.typ = 48, |
| 85 | .hback_porch.typ = 48, |
| 86 | .hsync_len.typ = 9, |
| 87 | .vactive.typ = 1280, |
| 88 | .vfront_porch.typ = 12, |
| 89 | .vback_porch.typ = 12, |
| 90 | .vsync_len.typ = 5, |
| 91 | }; |
| 92 | |
| 93 | static void rm68200_dcs_write_buf(struct udevice *dev, const void *data, |
| 94 | size_t len) |
| 95 | { |
| 96 | struct mipi_dsi_panel_plat *plat = dev_get_platdata(dev); |
| 97 | struct mipi_dsi_device *device = plat->device; |
| 98 | int err; |
| 99 | |
| 100 | err = mipi_dsi_dcs_write_buffer(device, data, len); |
| 101 | if (err < 0) |
| 102 | dev_err(dev, "MIPI DSI DCS write buffer failed: %d\n", err); |
| 103 | } |
| 104 | |
| 105 | static void rm68200_dcs_write_cmd(struct udevice *dev, u8 cmd, u8 value) |
| 106 | { |
| 107 | struct mipi_dsi_panel_plat *plat = dev_get_platdata(dev); |
| 108 | struct mipi_dsi_device *device = plat->device; |
| 109 | int err; |
| 110 | |
| 111 | err = mipi_dsi_dcs_write(device, cmd, &value, 1); |
| 112 | if (err < 0) |
| 113 | dev_err(dev, "MIPI DSI DCS write failed: %d\n", err); |
| 114 | } |
| 115 | |
| 116 | #define dcs_write_seq(ctx, seq...) \ |
| 117 | ({ \ |
| 118 | static const u8 d[] = { seq }; \ |
| 119 | \ |
| 120 | rm68200_dcs_write_buf(ctx, d, ARRAY_SIZE(d)); \ |
| 121 | }) |
| 122 | |
| 123 | /* |
| 124 | * This panel is not able to auto-increment all cmd addresses so for some of |
| 125 | * them, we need to send them one by one... |
| 126 | */ |
| 127 | #define dcs_write_cmd_seq(ctx, cmd, seq...) \ |
| 128 | ({ \ |
| 129 | static const u8 d[] = { seq }; \ |
| 130 | unsigned int i; \ |
| 131 | \ |
| 132 | for (i = 0; i < ARRAY_SIZE(d) ; i++) \ |
| 133 | rm68200_dcs_write_cmd(ctx, cmd + i, d[i]); \ |
| 134 | }) |
| 135 | |
| 136 | static void rm68200_init_sequence(struct udevice *dev) |
| 137 | { |
| 138 | /* Enter CMD2 with page 0 */ |
| 139 | dcs_write_seq(dev, MCS_CMD_MODE_SW, MCS_CMD2_P0); |
| 140 | dcs_write_cmd_seq(dev, MCS_EXT_PWR_IC, 0xC0, 0x53, 0x00); |
| 141 | dcs_write_seq(dev, MCS_BT2CTR, 0xE5); |
| 142 | dcs_write_seq(dev, MCS_SETAVDD, 0x0A); |
| 143 | dcs_write_seq(dev, MCS_SETAVEE, 0x0A); |
| 144 | dcs_write_seq(dev, MCS_SGOPCTR, 0x52); |
| 145 | dcs_write_seq(dev, MCS_BT3CTR, 0x53); |
| 146 | dcs_write_seq(dev, MCS_BT4CTR, 0x5A); |
| 147 | dcs_write_seq(dev, MCS_INVCTR, 0x00); |
| 148 | dcs_write_seq(dev, MCS_STBCTR, 0x0A); |
| 149 | dcs_write_seq(dev, MCS_SDCTR, 0x06); |
| 150 | dcs_write_seq(dev, MCS_VCMCTR, 0x56); |
| 151 | dcs_write_seq(dev, MCS_SETVGN, 0xA0, 0x00); |
| 152 | dcs_write_seq(dev, MCS_SETVGP, 0xA0, 0x00); |
| 153 | dcs_write_seq(dev, MCS_SW_CTRL, 0x11); /* 2 data lanes, see doc */ |
| 154 | |
| 155 | dcs_write_seq(dev, MCS_CMD_MODE_SW, MCS_CMD2_P2); |
| 156 | dcs_write_seq(dev, GOA_VSTV1, 0x05); |
| 157 | dcs_write_seq(dev, 0x02, 0x0B); |
| 158 | dcs_write_seq(dev, 0x03, 0x0F); |
| 159 | dcs_write_seq(dev, 0x04, 0x7D, 0x00, 0x50); |
| 160 | dcs_write_cmd_seq(dev, GOA_VSTV2, 0x05, 0x16, 0x0D, 0x11, 0x7D, 0x00, |
| 161 | 0x50); |
| 162 | dcs_write_cmd_seq(dev, GOA_VCLK1, 0x07, 0x08, 0x01, 0x02, 0x00, 0x7D, |
| 163 | 0x00, 0x85, 0x08); |
| 164 | dcs_write_cmd_seq(dev, GOA_VCLK2, 0x03, 0x04, 0x05, 0x06, 0x00, 0x7D, |
| 165 | 0x00, 0x85, 0x08); |
| 166 | dcs_write_seq(dev, GOA_VCLK_OPT1, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 167 | 0x00, 0x00, 0x00, 0x00); |
| 168 | dcs_write_cmd_seq(dev, GOA_BICLK1, 0x07, 0x08); |
| 169 | dcs_write_seq(dev, 0x2D, 0x01); |
| 170 | dcs_write_seq(dev, 0x2F, 0x02, 0x00, 0x40, 0x05, 0x08, 0x54, 0x7D, |
| 171 | 0x00); |
| 172 | dcs_write_cmd_seq(dev, GOA_BICLK2, 0x03, 0x04, 0x05, 0x06, 0x00); |
| 173 | dcs_write_seq(dev, 0x3D, 0x40); |
| 174 | dcs_write_seq(dev, 0x3F, 0x05, 0x08, 0x54, 0x7D, 0x00); |
| 175 | dcs_write_seq(dev, GOA_BICLK3, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 176 | 0x00, 0x00, 0x00, 0x00, 0x00); |
| 177 | dcs_write_seq(dev, GOA_BICLK4, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 178 | 0x00, 0x00); |
| 179 | dcs_write_seq(dev, 0x58, 0x00, 0x00, 0x00); |
| 180 | dcs_write_seq(dev, GOA_BICLK_OPT1, 0x00, 0x00, 0x00, 0x00, 0x00); |
| 181 | dcs_write_seq(dev, GOA_BICLK_OPT2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 182 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00); |
| 183 | dcs_write_seq(dev, MCS_GOA_GPO1, 0x00, 0x00, 0x00, 0x00); |
| 184 | dcs_write_seq(dev, MCS_GOA_GPO2, 0x00, 0x20, 0x00); |
| 185 | dcs_write_seq(dev, MCS_GOA_EQ, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, |
| 186 | 0x00, 0x00); |
| 187 | dcs_write_seq(dev, MCS_GOA_CLK_GALLON, 0x00, 0x00); |
| 188 | dcs_write_cmd_seq(dev, MCS_GOA_FS_SEL0, 0xBF, 0x02, 0x06, 0x14, 0x10, |
| 189 | 0x16, 0x12, 0x08, 0x3F); |
| 190 | dcs_write_cmd_seq(dev, MCS_GOA_FS_SEL1, 0x3F, 0x3F, 0x3F, 0x3F, 0x0C, |
| 191 | 0x0A, 0x0E, 0x3F, 0x3F, 0x00); |
| 192 | dcs_write_cmd_seq(dev, MCS_GOA_FS_SEL2, 0x04, 0x3F, 0x3F, 0x3F, 0x3F, |
| 193 | 0x05, 0x01, 0x3F, 0x3F, 0x0F); |
| 194 | dcs_write_cmd_seq(dev, MCS_GOA_FS_SEL3, 0x0B, 0x0D, 0x3F, 0x3F, 0x3F, |
| 195 | 0x3F); |
| 196 | dcs_write_cmd_seq(dev, 0xA2, 0x3F, 0x09, 0x13, 0x17, 0x11, 0x15); |
| 197 | dcs_write_cmd_seq(dev, 0xA9, 0x07, 0x03, 0x3F); |
| 198 | dcs_write_cmd_seq(dev, MCS_GOA_BS_SEL0, 0x3F, 0x05, 0x01, 0x17, 0x13, |
| 199 | 0x15, 0x11, 0x0F, 0x3F); |
| 200 | dcs_write_cmd_seq(dev, MCS_GOA_BS_SEL1, 0x3F, 0x3F, 0x3F, 0x3F, 0x0B, |
| 201 | 0x0D, 0x09, 0x3F, 0x3F, 0x07); |
| 202 | dcs_write_cmd_seq(dev, MCS_GOA_BS_SEL2, 0x03, 0x3F, 0x3F, 0x3F, 0x3F, |
| 203 | 0x02, 0x06, 0x3F, 0x3F, 0x08); |
| 204 | dcs_write_cmd_seq(dev, MCS_GOA_BS_SEL3, 0x0C, 0x0A, 0x3F, 0x3F, 0x3F, |
| 205 | 0x3F, 0x3F, 0x0E, 0x10, 0x14); |
| 206 | dcs_write_cmd_seq(dev, MCS_GOA_BS_SEL4, 0x12, 0x16, 0x00, 0x04, 0x3F); |
| 207 | dcs_write_seq(dev, 0xDC, 0x02); |
| 208 | dcs_write_seq(dev, 0xDE, 0x12); |
| 209 | |
| 210 | dcs_write_seq(dev, MCS_CMD_MODE_SW, 0x0E); /* No documentation */ |
| 211 | dcs_write_seq(dev, 0x01, 0x75); |
| 212 | |
| 213 | dcs_write_seq(dev, MCS_CMD_MODE_SW, MCS_CMD2_P3); |
| 214 | dcs_write_cmd_seq(dev, MCS_GAMMA_VP, 0x00, 0x0C, 0x12, 0x0E, 0x06, |
| 215 | 0x12, 0x0E, 0x0B, 0x15, 0x0B, 0x10, 0x07, 0x0F, |
| 216 | 0x12, 0x0C, 0x00); |
| 217 | dcs_write_cmd_seq(dev, MCS_GAMMA_VN, 0x00, 0x0C, 0x12, 0x0E, 0x06, |
| 218 | 0x12, 0x0E, 0x0B, 0x15, 0x0B, 0x10, 0x07, 0x0F, |
| 219 | 0x12, 0x0C, 0x00); |
| 220 | |
| 221 | /* Exit CMD2 */ |
| 222 | dcs_write_seq(dev, MCS_CMD_MODE_SW, MCS_CMD1_UCS); |
| 223 | } |
| 224 | |
| 225 | static int rm68200_panel_enable_backlight(struct udevice *dev) |
| 226 | { |
| 227 | struct mipi_dsi_panel_plat *plat = dev_get_platdata(dev); |
| 228 | struct mipi_dsi_device *device = plat->device; |
| 229 | struct rm68200_panel_priv *priv = dev_get_priv(dev); |
| 230 | int ret; |
| 231 | |
| 232 | ret = mipi_dsi_attach(device); |
| 233 | if (ret < 0) |
| 234 | return ret; |
| 235 | |
| 236 | rm68200_init_sequence(dev); |
| 237 | |
| 238 | ret = mipi_dsi_dcs_exit_sleep_mode(device); |
| 239 | if (ret) |
| 240 | return ret; |
| 241 | |
| 242 | mdelay(125); |
| 243 | |
| 244 | ret = mipi_dsi_dcs_set_display_on(device); |
| 245 | if (ret) |
| 246 | return ret; |
| 247 | |
| 248 | mdelay(20); |
| 249 | |
| 250 | ret = backlight_enable(priv->backlight); |
| 251 | if (ret) |
| 252 | return ret; |
| 253 | |
| 254 | return 0; |
| 255 | } |
| 256 | |
| 257 | static int rm68200_panel_get_display_timing(struct udevice *dev, |
| 258 | struct display_timing *timings) |
| 259 | { |
| 260 | struct mipi_dsi_panel_plat *plat = dev_get_platdata(dev); |
| 261 | struct mipi_dsi_device *device = plat->device; |
| 262 | struct rm68200_panel_priv *priv = dev_get_priv(dev); |
| 263 | |
| 264 | memcpy(timings, &default_timing, sizeof(*timings)); |
| 265 | |
| 266 | /* fill characteristics of DSI data link */ |
| 267 | device->lanes = priv->lanes; |
| 268 | device->format = priv->format; |
| 269 | device->mode_flags = priv->mode_flags; |
| 270 | |
| 271 | return 0; |
| 272 | } |
| 273 | |
| 274 | static int rm68200_panel_ofdata_to_platdata(struct udevice *dev) |
| 275 | { |
| 276 | struct rm68200_panel_priv *priv = dev_get_priv(dev); |
| 277 | int ret; |
| 278 | |
| 279 | if (IS_ENABLED(CONFIG_DM_REGULATOR)) { |
| 280 | ret = device_get_supply_regulator(dev, "power-supply", |
| 281 | &priv->reg); |
| 282 | if (ret && ret != -ENOENT) { |
| 283 | dev_err(dev, "Warning: cannot get power supply\n"); |
| 284 | return ret; |
| 285 | } |
| 286 | } |
| 287 | |
| 288 | ret = gpio_request_by_name(dev, "reset-gpios", 0, &priv->reset, |
| 289 | GPIOD_IS_OUT); |
| 290 | if (ret) { |
| 291 | dev_err(dev, "Warning: cannot get reset GPIO\n"); |
| 292 | if (ret != -ENOENT) |
| 293 | return ret; |
| 294 | } |
| 295 | |
| 296 | ret = uclass_get_device_by_phandle(UCLASS_PANEL_BACKLIGHT, dev, |
| 297 | "backlight", &priv->backlight); |
| 298 | if (ret) { |
| 299 | dev_err(dev, "Cannot get backlight: ret=%d\n", ret); |
| 300 | return ret; |
| 301 | } |
| 302 | |
| 303 | return 0; |
| 304 | } |
| 305 | |
| 306 | static int rm68200_panel_probe(struct udevice *dev) |
| 307 | { |
| 308 | struct rm68200_panel_priv *priv = dev_get_priv(dev); |
| 309 | int ret; |
| 310 | |
| 311 | if (IS_ENABLED(CONFIG_DM_REGULATOR) && priv->reg) { |
| 312 | ret = regulator_set_enable(priv->reg, true); |
| 313 | if (ret) |
| 314 | return ret; |
| 315 | } |
| 316 | |
| 317 | /* reset panel */ |
| 318 | dm_gpio_set_value(&priv->reset, true); |
| 319 | mdelay(1); |
| 320 | dm_gpio_set_value(&priv->reset, false); |
| 321 | mdelay(10); |
| 322 | |
| 323 | priv->lanes = 2; |
| 324 | priv->format = MIPI_DSI_FMT_RGB888; |
| 325 | priv->mode_flags = MIPI_DSI_MODE_VIDEO | |
| 326 | MIPI_DSI_MODE_VIDEO_BURST | |
| 327 | MIPI_DSI_MODE_LPM; |
| 328 | |
| 329 | return 0; |
| 330 | } |
| 331 | |
| 332 | static const struct panel_ops rm68200_panel_ops = { |
| 333 | .enable_backlight = rm68200_panel_enable_backlight, |
| 334 | .get_display_timing = rm68200_panel_get_display_timing, |
| 335 | }; |
| 336 | |
| 337 | static const struct udevice_id rm68200_panel_ids[] = { |
| 338 | { .compatible = "raydium,rm68200" }, |
| 339 | { } |
| 340 | }; |
| 341 | |
| 342 | U_BOOT_DRIVER(rm68200_panel) = { |
| 343 | .name = "rm68200_panel", |
| 344 | .id = UCLASS_PANEL, |
| 345 | .of_match = rm68200_panel_ids, |
| 346 | .ops = &rm68200_panel_ops, |
| 347 | .ofdata_to_platdata = rm68200_panel_ofdata_to_platdata, |
| 348 | .probe = rm68200_panel_probe, |
| 349 | .platdata_auto_alloc_size = sizeof(struct mipi_dsi_panel_plat), |
| 350 | .priv_auto_alloc_size = sizeof(struct rm68200_panel_priv), |
| 351 | }; |