Sebastian Reichel | 0b3da99 | 2021-07-15 17:40:00 +0200 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0-only |
| 2 | /* |
| 3 | * Copyright (C) 2021, Collabora Ltd. |
| 4 | * Copyright (C) 2021, General Electric Company |
| 5 | * Author(s): Sebastian Reichel <sebastian.reichel@collabora.com> |
| 6 | */ |
| 7 | |
| 8 | #define LOG_CATEGORY UCLASS_GPIO |
| 9 | |
| 10 | #include <common.h> |
| 11 | #include <errno.h> |
| 12 | #include <dm.h> |
| 13 | #include <i2c.h> |
| 14 | #include <asm/gpio.h> |
| 15 | #include <dm/device_compat.h> |
| 16 | #include <dt-bindings/gpio/gpio.h> |
| 17 | |
| 18 | enum mcp230xx_type { |
| 19 | UNKNOWN = 0, |
| 20 | MCP23008, |
| 21 | MCP23017, |
| 22 | MCP23018, |
| 23 | }; |
| 24 | |
| 25 | #define MCP230XX_IODIR 0x00 |
| 26 | #define MCP230XX_GPPU 0x06 |
| 27 | #define MCP230XX_GPIO 0x09 |
| 28 | #define MCP230XX_OLAT 0x0a |
| 29 | |
| 30 | #define BANKSIZE 8 |
| 31 | |
| 32 | static int mcp230xx_read(struct udevice *dev, uint reg, uint offset) |
| 33 | { |
| 34 | struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); |
| 35 | int bank = offset / BANKSIZE; |
| 36 | int mask = 1 << (offset % BANKSIZE); |
| 37 | int shift = (uc_priv->gpio_count / BANKSIZE) - 1; |
| 38 | int ret; |
| 39 | |
| 40 | ret = dm_i2c_reg_read(dev, (reg << shift) | bank); |
| 41 | if (ret < 0) |
| 42 | return ret; |
| 43 | |
| 44 | return !!(ret & mask); |
| 45 | } |
| 46 | |
| 47 | static int mcp230xx_write(struct udevice *dev, uint reg, uint offset, bool val) |
| 48 | { |
| 49 | struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); |
| 50 | int bank = offset / BANKSIZE; |
| 51 | int mask = 1 << (offset % BANKSIZE); |
| 52 | int shift = (uc_priv->gpio_count / BANKSIZE) - 1; |
| 53 | |
| 54 | return dm_i2c_reg_clrset(dev, (reg << shift) | bank, mask, val ? mask : 0); |
| 55 | } |
| 56 | |
| 57 | static int mcp230xx_get_value(struct udevice *dev, uint offset) |
| 58 | { |
| 59 | int ret; |
| 60 | |
| 61 | ret = mcp230xx_read(dev, MCP230XX_GPIO, offset); |
| 62 | if (ret < 0) { |
| 63 | dev_err(dev, "%s error: %d\n", __func__, ret); |
| 64 | return ret; |
| 65 | } |
| 66 | |
| 67 | return ret; |
| 68 | } |
| 69 | |
| 70 | static int mcp230xx_set_value(struct udevice *dev, uint offset, int val) |
| 71 | { |
| 72 | int ret; |
| 73 | |
| 74 | ret = mcp230xx_write(dev, MCP230XX_GPIO, offset, val); |
| 75 | if (ret < 0) { |
| 76 | dev_err(dev, "%s error: %d\n", __func__, ret); |
| 77 | return ret; |
| 78 | } |
| 79 | |
| 80 | return ret; |
| 81 | } |
| 82 | |
| 83 | static int mcp230xx_get_flags(struct udevice *dev, unsigned int offset, |
| 84 | ulong *flags) |
| 85 | { |
| 86 | int direction, pullup; |
| 87 | |
| 88 | pullup = mcp230xx_read(dev, MCP230XX_GPPU, offset); |
| 89 | if (pullup < 0) { |
| 90 | dev_err(dev, "%s error: %d\n", __func__, pullup); |
| 91 | return pullup; |
| 92 | } |
| 93 | |
| 94 | direction = mcp230xx_read(dev, MCP230XX_IODIR, offset); |
| 95 | if (direction < 0) { |
| 96 | dev_err(dev, "%s error: %d\n", __func__, direction); |
| 97 | return direction; |
| 98 | } |
| 99 | |
| 100 | *flags = direction ? GPIOD_IS_IN : GPIOD_IS_OUT; |
| 101 | |
| 102 | if (pullup) |
| 103 | *flags |= GPIOD_PULL_UP; |
| 104 | |
| 105 | return 0; |
| 106 | } |
| 107 | |
| 108 | static int mcp230xx_set_flags(struct udevice *dev, uint offset, ulong flags) |
| 109 | { |
| 110 | bool input = !(flags & (GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE)); |
| 111 | bool pullup = flags & GPIOD_PULL_UP; |
| 112 | ulong supported_mask; |
| 113 | int ret; |
| 114 | |
| 115 | /* Note: active-low is ignored (handled by core) */ |
| 116 | supported_mask = GPIOD_ACTIVE_LOW | GPIOD_MASK_DIR | GPIOD_PULL_UP; |
| 117 | if (flags & ~supported_mask) { |
| 118 | dev_err(dev, "%s unsupported flag(s): %lx\n", __func__, flags); |
| 119 | return -EINVAL; |
| 120 | } |
| 121 | |
| 122 | ret = mcp230xx_write(dev, MCP230XX_OLAT, offset, !!(flags & GPIOD_IS_OUT_ACTIVE)); |
| 123 | if (ret) { |
| 124 | dev_err(dev, "%s failed to setup output latch: %d\n", __func__, ret); |
| 125 | return ret; |
| 126 | } |
| 127 | |
| 128 | ret = mcp230xx_write(dev, MCP230XX_GPPU, offset, pullup); |
| 129 | if (ret) { |
| 130 | dev_err(dev, "%s failed to setup pull-up: %d\n", __func__, ret); |
| 131 | return ret; |
| 132 | } |
| 133 | |
| 134 | ret = mcp230xx_write(dev, MCP230XX_IODIR, offset, input); |
| 135 | if (ret) { |
| 136 | dev_err(dev, "%s failed to setup direction: %d\n", __func__, ret); |
| 137 | return ret; |
| 138 | } |
| 139 | |
| 140 | return 0; |
| 141 | } |
| 142 | |
| 143 | static int mcp230xx_direction_input(struct udevice *dev, uint offset) |
| 144 | { |
| 145 | return mcp230xx_set_flags(dev, offset, GPIOD_IS_IN); |
| 146 | } |
| 147 | |
| 148 | static int mcp230xx_direction_output(struct udevice *dev, uint offset, int val) |
| 149 | { |
| 150 | int ret = mcp230xx_set_value(dev, offset, val); |
| 151 | if (ret < 0) { |
| 152 | dev_err(dev, "%s error: %d\n", __func__, ret); |
| 153 | return ret; |
| 154 | } |
| 155 | return mcp230xx_set_flags(dev, offset, GPIOD_IS_OUT); |
| 156 | } |
| 157 | |
| 158 | static int mcp230xx_get_function(struct udevice *dev, uint offset) |
| 159 | { |
| 160 | int ret; |
| 161 | |
| 162 | ret = mcp230xx_read(dev, MCP230XX_IODIR, offset); |
| 163 | if (ret < 0) { |
| 164 | dev_err(dev, "%s error: %d\n", __func__, ret); |
| 165 | return ret; |
| 166 | } |
| 167 | |
| 168 | return ret ? GPIOF_INPUT : GPIOF_OUTPUT; |
| 169 | } |
| 170 | |
| 171 | static const struct dm_gpio_ops mcp230xx_ops = { |
| 172 | .direction_input = mcp230xx_direction_input, |
| 173 | .direction_output = mcp230xx_direction_output, |
| 174 | .get_value = mcp230xx_get_value, |
| 175 | .set_value = mcp230xx_set_value, |
| 176 | .get_function = mcp230xx_get_function, |
| 177 | .set_flags = mcp230xx_set_flags, |
| 178 | .get_flags = mcp230xx_get_flags, |
| 179 | }; |
| 180 | |
| 181 | static int mcp230xx_probe(struct udevice *dev) |
| 182 | { |
| 183 | struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); |
| 184 | char name[32], label[8], *str; |
| 185 | int addr, gpio_count, size; |
| 186 | const u8 *tmp; |
| 187 | |
| 188 | switch (dev_get_driver_data(dev)) { |
| 189 | case MCP23008: |
| 190 | gpio_count = 8; |
| 191 | break; |
| 192 | case MCP23017: |
| 193 | case MCP23018: |
| 194 | gpio_count = 16; |
| 195 | break; |
| 196 | default: |
| 197 | return -ENODEV; |
| 198 | } |
| 199 | |
| 200 | addr = dev_read_addr(dev); |
| 201 | tmp = dev_read_prop(dev, "label", &size); |
| 202 | if (tmp) { |
| 203 | memcpy(label, tmp, sizeof(label) - 1); |
| 204 | label[sizeof(label) - 1] = '\0'; |
| 205 | snprintf(name, sizeof(name), "%s@%x_", label, addr); |
| 206 | } else { |
| 207 | snprintf(name, sizeof(name), "gpio@%x_", addr); |
| 208 | } |
| 209 | |
| 210 | str = strdup(name); |
| 211 | if (!str) |
| 212 | return -ENOMEM; |
| 213 | |
| 214 | uc_priv->bank_name = str; |
| 215 | uc_priv->gpio_count = gpio_count; |
| 216 | |
| 217 | dev_dbg(dev, "%s is ready\n", str); |
| 218 | |
| 219 | return 0; |
| 220 | } |
| 221 | |
| 222 | static const struct udevice_id mcp230xx_ids[] = { |
| 223 | { .compatible = "microchip,mcp23008", .data = MCP23008, }, |
| 224 | { .compatible = "microchip,mcp23017", .data = MCP23017, }, |
| 225 | { .compatible = "microchip,mcp23018", .data = MCP23018, }, |
| 226 | { } |
| 227 | }; |
| 228 | |
| 229 | U_BOOT_DRIVER(mcp230xx) = { |
| 230 | .name = "mcp230xx", |
| 231 | .id = UCLASS_GPIO, |
| 232 | .ops = &mcp230xx_ops, |
| 233 | .probe = mcp230xx_probe, |
| 234 | .of_match = mcp230xx_ids, |
| 235 | }; |