| Schuyler Patton | 45e7f7e | 2016-11-25 11:14:25 +0530 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/ |
| 3 | * |
| 4 | * This program is free software; you can redistribute it and/or modify |
| 5 | * it under the terms of the GNU General Public License version 2 as |
| 6 | * published by the Free Software Foundation. |
| 7 | */ |
| 8 | /dts-v1/; |
| 9 | |
| 10 | #include "dra72x.dtsi" |
| 11 | #include <dt-bindings/gpio/gpio.h> |
| 12 | #include <dt-bindings/interrupt-controller/irq.h> |
| 13 | #include "am57xx-idk-common.dtsi" |
| Lokesh Vutla | 4ddaa6c | 2017-08-21 12:50:59 +0530 | [diff] [blame] | 14 | #include "dra72x-mmc-iodelay.dtsi" |
| Schuyler Patton | 45e7f7e | 2016-11-25 11:14:25 +0530 | [diff] [blame] | 15 | |
| 16 | / { |
| 17 | model = "TI AM5718 IDK"; |
| 18 | compatible = "ti,am5718-idk", "ti,am5718", "ti,dra7"; |
| 19 | |
| 20 | memory@80000000 { |
| 21 | device_type = "memory"; |
| 22 | reg = <0x0 0x80000000 0x0 0x40000000>; |
| 23 | }; |
| 24 | |
| 25 | leds { |
| 26 | compatible = "gpio-leds"; |
| 27 | cpu0-led { |
| 28 | label = "status0:red:cpu0"; |
| 29 | gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>; |
| 30 | default-state = "off"; |
| 31 | linux,default-trigger = "cpu0"; |
| 32 | }; |
| 33 | |
| 34 | usr0-led { |
| 35 | label = "status0:green:usr"; |
| 36 | gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; |
| 37 | default-state = "off"; |
| 38 | }; |
| 39 | |
| 40 | heartbeat-led { |
| 41 | label = "status0:blue:heartbeat"; |
| 42 | gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; |
| 43 | default-state = "off"; |
| 44 | linux,default-trigger = "heartbeat"; |
| 45 | }; |
| 46 | |
| 47 | usr1-led { |
| 48 | label = "status1:red:usr"; |
| 49 | gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; |
| 50 | default-state = "off"; |
| 51 | }; |
| 52 | |
| 53 | usr2-led { |
| 54 | label = "status1:green:usr"; |
| 55 | gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; |
| 56 | default-state = "off"; |
| 57 | }; |
| 58 | |
| 59 | mmc0-led { |
| 60 | label = "status1:blue:mmc0"; |
| 61 | gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>; |
| 62 | default-state = "off"; |
| 63 | linux,default-trigger = "mmc0"; |
| 64 | }; |
| 65 | }; |
| Schuyler Patton | 45e7f7e | 2016-11-25 11:14:25 +0530 | [diff] [blame] | 66 | }; |
| 67 | |
| 68 | &omap_dwc3_2 { |
| 69 | extcon = <&extcon_usb2>; |
| 70 | }; |
| Lokesh Vutla | 4ddaa6c | 2017-08-21 12:50:59 +0530 | [diff] [blame] | 71 | |
| 72 | &extcon_usb2 { |
| 73 | id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>; |
| 74 | vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>; |
| 75 | }; |
| 76 | |
| 77 | &mailbox5 { |
| 78 | status = "okay"; |
| 79 | mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { |
| 80 | status = "okay"; |
| 81 | }; |
| 82 | mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { |
| 83 | status = "okay"; |
| 84 | }; |
| 85 | }; |
| 86 | |
| 87 | &mailbox6 { |
| 88 | status = "okay"; |
| 89 | mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { |
| 90 | status = "okay"; |
| 91 | }; |
| 92 | }; |
| 93 | |
| 94 | &pcie1_rc { |
| 95 | status = "okay"; |
| 96 | gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; |
| 97 | }; |
| 98 | |
| 99 | &pcie1_ep { |
| 100 | gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; |
| 101 | }; |
| 102 | |
| 103 | &mmc1 { |
| 104 | pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104"; |
| 105 | pinctrl-0 = <&mmc1_pins_default>; |
| 106 | pinctrl-1 = <&mmc1_pins_hs>; |
| 107 | pinctrl-2 = <&mmc1_pins_sdr12>; |
| 108 | pinctrl-3 = <&mmc1_pins_sdr25>; |
| 109 | pinctrl-4 = <&mmc1_pins_sdr50>; |
| 110 | pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>; |
| 111 | pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>; |
| 112 | }; |
| 113 | |
| 114 | &mmc2 { |
| 115 | pinctrl-names = "default", "hs", "ddr_1_8v"; |
| 116 | pinctrl-0 = <&mmc2_pins_default>; |
| 117 | pinctrl-1 = <&mmc2_pins_hs>; |
| 118 | pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>; |
| 119 | }; |