rev13@wp.pl | eaaa4f7 | 2015-03-01 12:44:40 +0100 | [diff] [blame] | 1 | /* |
| 2 | * (C) Copyright 2015 |
Kamil Lulko | 5be9356 | 2015-11-29 11:50:53 +0100 | [diff] [blame] | 3 | * Kamil Lulko, <kamil.lulko@gmail.com> |
rev13@wp.pl | eaaa4f7 | 2015-03-01 12:44:40 +0100 | [diff] [blame] | 4 | * |
| 5 | * SPDX-License-Identifier: GPL-2.0+ |
| 6 | */ |
| 7 | |
| 8 | #include <common.h> |
| 9 | #include <asm/io.h> |
| 10 | #include <asm/arch/stm32.h> |
Vikas Manocha | 9ecb0c4 | 2016-03-09 15:18:13 -0800 | [diff] [blame] | 11 | #include "stm32_flash.h" |
rev13@wp.pl | eaaa4f7 | 2015-03-01 12:44:40 +0100 | [diff] [blame] | 12 | |
| 13 | flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; |
| 14 | |
Vikas Manocha | 9ecb0c4 | 2016-03-09 15:18:13 -0800 | [diff] [blame] | 15 | #define STM32_FLASH ((struct stm32_flash_regs *)FLASH_CNTL_BASE) |
rev13@wp.pl | eaaa4f7 | 2015-03-01 12:44:40 +0100 | [diff] [blame] | 16 | |
Vikas Manocha | 9ecb0c4 | 2016-03-09 15:18:13 -0800 | [diff] [blame] | 17 | void stm32_flash_latency_cfg(int latency) |
| 18 | { |
| 19 | /* 5 wait states, Prefetch enabled, D-Cache enabled, I-Cache enabled */ |
| 20 | writel(FLASH_ACR_WS(5) | FLASH_ACR_PRFTEN | FLASH_ACR_ICEN |
| 21 | | FLASH_ACR_DCEN, &STM32_FLASH->acr); |
| 22 | } |
| 23 | |
| 24 | static void stm32_flash_lock(u8 lock) |
rev13@wp.pl | eaaa4f7 | 2015-03-01 12:44:40 +0100 | [diff] [blame] | 25 | { |
| 26 | if (lock) { |
| 27 | setbits_le32(&STM32_FLASH->cr, STM32_FLASH_CR_LOCK); |
| 28 | } else { |
| 29 | writel(STM32_FLASH_KEY1, &STM32_FLASH->key); |
| 30 | writel(STM32_FLASH_KEY2, &STM32_FLASH->key); |
| 31 | } |
| 32 | } |
| 33 | |
| 34 | unsigned long flash_init(void) |
| 35 | { |
| 36 | unsigned long total_size = 0; |
| 37 | u8 i, j; |
| 38 | |
| 39 | for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { |
Vikas Manocha | 9ecb0c4 | 2016-03-09 15:18:13 -0800 | [diff] [blame] | 40 | flash_info[i].flash_id = FLASH_STM32; |
rev13@wp.pl | eaaa4f7 | 2015-03-01 12:44:40 +0100 | [diff] [blame] | 41 | flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT; |
| 42 | flash_info[i].start[0] = CONFIG_SYS_FLASH_BASE + (i << 20); |
| 43 | flash_info[i].size = sect_sz_kb[0]; |
| 44 | for (j = 1; j < CONFIG_SYS_MAX_FLASH_SECT; j++) { |
| 45 | flash_info[i].start[j] = flash_info[i].start[j - 1] |
| 46 | + (sect_sz_kb[j - 1]); |
| 47 | flash_info[i].size += sect_sz_kb[j]; |
| 48 | } |
| 49 | total_size += flash_info[i].size; |
| 50 | } |
| 51 | |
| 52 | return total_size; |
| 53 | } |
| 54 | |
| 55 | void flash_print_info(flash_info_t *info) |
| 56 | { |
| 57 | int i; |
| 58 | |
| 59 | if (info->flash_id == FLASH_UNKNOWN) { |
| 60 | printf("missing or unknown FLASH type\n"); |
| 61 | return; |
Vikas Manocha | 9ecb0c4 | 2016-03-09 15:18:13 -0800 | [diff] [blame] | 62 | } else if (info->flash_id == FLASH_STM32) { |
| 63 | printf("stm32 Embedded Flash\n"); |
rev13@wp.pl | eaaa4f7 | 2015-03-01 12:44:40 +0100 | [diff] [blame] | 64 | } |
| 65 | |
| 66 | printf(" Size: %ld MB in %d Sectors\n", |
| 67 | info->size >> 20, info->sector_count); |
| 68 | |
| 69 | printf(" Sector Start Addresses:"); |
| 70 | for (i = 0; i < info->sector_count; ++i) { |
| 71 | if ((i % 5) == 0) |
| 72 | printf("\n "); |
| 73 | printf(" %08lX%s", |
| 74 | info->start[i], |
| 75 | info->protect[i] ? " (RO)" : " "); |
| 76 | } |
| 77 | printf("\n"); |
| 78 | return; |
| 79 | } |
| 80 | |
| 81 | int flash_erase(flash_info_t *info, int first, int last) |
| 82 | { |
| 83 | u8 bank = 0xFF; |
| 84 | int i; |
| 85 | |
| 86 | for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { |
| 87 | if (info == &flash_info[i]) { |
| 88 | bank = i; |
| 89 | break; |
| 90 | } |
| 91 | } |
| 92 | if (bank == 0xFF) |
| 93 | return -1; |
| 94 | |
Vikas Manocha | 9ecb0c4 | 2016-03-09 15:18:13 -0800 | [diff] [blame] | 95 | stm32_flash_lock(0); |
rev13@wp.pl | eaaa4f7 | 2015-03-01 12:44:40 +0100 | [diff] [blame] | 96 | |
| 97 | for (i = first; i <= last; i++) { |
| 98 | while (readl(&STM32_FLASH->sr) & STM32_FLASH_SR_BSY) |
| 99 | ; |
| 100 | |
Vadzim Dambrouski | 43fb0e3 | 2015-10-23 21:14:07 +0300 | [diff] [blame] | 101 | /* clear old sector number before writing a new one */ |
| 102 | clrbits_le32(&STM32_FLASH->cr, STM32_FLASH_CR_SNB_MASK); |
| 103 | |
rev13@wp.pl | eaaa4f7 | 2015-03-01 12:44:40 +0100 | [diff] [blame] | 104 | if (bank == 0) { |
| 105 | setbits_le32(&STM32_FLASH->cr, |
| 106 | (i << STM32_FLASH_CR_SNB_OFFSET)); |
| 107 | } else if (bank == 1) { |
| 108 | setbits_le32(&STM32_FLASH->cr, |
| 109 | ((0x10 | i) << STM32_FLASH_CR_SNB_OFFSET)); |
| 110 | } else { |
Vikas Manocha | 9ecb0c4 | 2016-03-09 15:18:13 -0800 | [diff] [blame] | 111 | stm32_flash_lock(1); |
rev13@wp.pl | eaaa4f7 | 2015-03-01 12:44:40 +0100 | [diff] [blame] | 112 | return -1; |
| 113 | } |
| 114 | setbits_le32(&STM32_FLASH->cr, STM32_FLASH_CR_SER); |
| 115 | setbits_le32(&STM32_FLASH->cr, STM32_FLASH_CR_STRT); |
| 116 | |
| 117 | while (readl(&STM32_FLASH->sr) & STM32_FLASH_SR_BSY) |
| 118 | ; |
| 119 | |
| 120 | clrbits_le32(&STM32_FLASH->cr, STM32_FLASH_CR_SER); |
rev13@wp.pl | eaaa4f7 | 2015-03-01 12:44:40 +0100 | [diff] [blame] | 121 | } |
| 122 | |
Vikas Manocha | 9ecb0c4 | 2016-03-09 15:18:13 -0800 | [diff] [blame] | 123 | stm32_flash_lock(1); |
rev13@wp.pl | eaaa4f7 | 2015-03-01 12:44:40 +0100 | [diff] [blame] | 124 | return 0; |
| 125 | } |
| 126 | |
| 127 | int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt) |
| 128 | { |
| 129 | ulong i; |
| 130 | |
| 131 | while (readl(&STM32_FLASH->sr) & STM32_FLASH_SR_BSY) |
| 132 | ; |
| 133 | |
Vikas Manocha | 9ecb0c4 | 2016-03-09 15:18:13 -0800 | [diff] [blame] | 134 | stm32_flash_lock(0); |
rev13@wp.pl | eaaa4f7 | 2015-03-01 12:44:40 +0100 | [diff] [blame] | 135 | |
| 136 | setbits_le32(&STM32_FLASH->cr, STM32_FLASH_CR_PG); |
| 137 | /* To make things simple use byte writes only */ |
| 138 | for (i = 0; i < cnt; i++) { |
| 139 | *(uchar *)(addr + i) = src[i]; |
Vikas Manocha | 9082517 | 2016-04-04 16:49:02 -0700 | [diff] [blame^] | 140 | /* avoid re-ordering flash data write and busy status |
| 141 | * check as flash memory space attributes are generally Normal |
| 142 | */ |
| 143 | mb(); |
rev13@wp.pl | eaaa4f7 | 2015-03-01 12:44:40 +0100 | [diff] [blame] | 144 | while (readl(&STM32_FLASH->sr) & STM32_FLASH_SR_BSY) |
| 145 | ; |
| 146 | } |
| 147 | clrbits_le32(&STM32_FLASH->cr, STM32_FLASH_CR_PG); |
Vikas Manocha | 9ecb0c4 | 2016-03-09 15:18:13 -0800 | [diff] [blame] | 148 | stm32_flash_lock(1); |
rev13@wp.pl | eaaa4f7 | 2015-03-01 12:44:40 +0100 | [diff] [blame] | 149 | |
| 150 | return 0; |
| 151 | } |