blob: 97d4ddb577dc351df059eadfe6769c96068ef42c [file] [log] [blame]
Ajay Kumar Gupta73592732009-12-22 10:56:13 +05301/*
2 * da8xx.c - TI's DA8xx platform specific usb wrapper functions.
3 *
4 * Author: Ajay Kumar Gupta <ajay.gupta@ti.com>
5 *
6 * Based on drivers/usb/musb/davinci.c
7 *
8 * Copyright (C) 2009 Texas Instruments Incorporated
9 *
Wolfgang Denk1a459662013-07-08 09:37:19 +020010 * SPDX-License-Identifier: GPL-2.0+
Ajay Kumar Gupta73592732009-12-22 10:56:13 +053011 */
12#include <common.h>
13
Sughosh Ganu25f8bf62012-08-09 10:45:20 +000014#include "musb_core.h"
15#include <asm/arch/da8xx-usb.h>
Ajay Kumar Gupta73592732009-12-22 10:56:13 +053016
17/* MUSB platform configuration */
18struct musb_config musb_cfg = {
Ajay Kumar Guptabbf4c012010-06-10 11:20:47 +053019 .regs = (struct musb_regs *)DA8XX_USB_OTG_CORE_BASE,
20 .timeout = DA8XX_USB_OTG_TIMEOUT,
21 .musb_speed = 0,
Ajay Kumar Gupta73592732009-12-22 10:56:13 +053022};
23
24/*
25 * This function enables VBUS by driving the GPIO Bank4 Pin 15 high.
26 */
27static void enable_vbus(void)
28{
29 u32 value;
30
31 /* configure GPIO bank4 pin 15 in output direction */
32 value = readl(&davinci_gpio_bank45->dir);
33 writel((value & (~DA8XX_USB_VBUS_GPIO)), &davinci_gpio_bank45->dir);
34
35 /* set GPIO bank4 pin 15 high to drive VBUS */
36 value = readl(&davinci_gpio_bank45->set_data);
37 writel((value | DA8XX_USB_VBUS_GPIO), &davinci_gpio_bank45->set_data);
38}
39
40/*
41 * Enable the usb0 phy. This initialization procedure is explained in
42 * the DA8xx USB user guide document.
43 */
44static u8 phy_on(void)
45{
46 u32 timeout;
47 u32 cfgchip2;
48
49 cfgchip2 = readl(&davinci_syscfg_regs->cfgchip2);
50
51 cfgchip2 &= ~(CFGCHIP2_RESET | CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN |
52 CFGCHIP2_OTGMODE | CFGCHIP2_REFFREQ);
53 cfgchip2 |= CFGCHIP2_SESENDEN | CFGCHIP2_VBDTCTEN | CFGCHIP2_PHY_PLLON |
54 CFGCHIP2_REFFREQ_24MHZ;
55
56 writel(cfgchip2, &davinci_syscfg_regs->cfgchip2);
57
58 /* wait until the usb phy pll locks */
59 timeout = musb_cfg.timeout;
60 while (timeout--)
61 if (readl(&davinci_syscfg_regs->cfgchip2) & CFGCHIP2_PHYCLKGD)
62 return 1;
63
64 /* USB phy was not turned on */
65 return 0;
66}
67
68/*
69 * Disable the usb phy
70 */
71static void phy_off(void)
72{
73 u32 cfgchip2;
74
75 /*
76 * Power down the on-chip PHY.
77 */
78 cfgchip2 = readl(&davinci_syscfg_regs->cfgchip2);
79 cfgchip2 &= ~CFGCHIP2_PHY_PLLON;
80 cfgchip2 |= CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN;
81 writel(cfgchip2, &davinci_syscfg_regs->cfgchip2);
82}
83
84/*
85 * This function performs DA8xx platform specific initialization for usb0.
86 */
87int musb_platform_init(void)
88{
89 u32 revision;
90
91 /* enable psc for usb2.0 */
92 lpsc_on(33);
93
94 /* enable usb vbus */
95 enable_vbus();
96
97 /* reset the controller */
98 writel(0x1, &da8xx_usb_regs->control);
99 udelay(5000);
100
101 /* start the on-chip usb phy and its pll */
102 if (phy_on() == 0)
103 return -1;
104
105 /* Returns zero if e.g. not clocked */
106 revision = readl(&da8xx_usb_regs->revision);
107 if (revision == 0)
108 return -1;
109
110 /* Disable all interrupts */
111 writel((DA8XX_USB_USBINT_MASK | DA8XX_USB_TXINT_MASK |
112 DA8XX_USB_RXINT_MASK), &da8xx_usb_regs->intmsk_set);
113 return 0;
114}
115
116/*
117 * This function performs DA8xx platform specific deinitialization for usb0.
118 */
119void musb_platform_deinit(void)
120{
121 /* Turn of the phy */
122 phy_off();
123
124 /* flush any interrupts */
125 writel((DA8XX_USB_USBINT_MASK | DA8XX_USB_TXINT_MASK |
126 DA8XX_USB_RXINT_MASK), &da8xx_usb_regs->intmsk_clr);
127 writel(0, &da8xx_usb_regs->eoi);
128}