blob: 61482017d65ca904c4b3f3b4839b179410c0ff84 [file] [log] [blame]
Michal Simek051a8ad2018-03-27 13:43:05 +02001// SPDX-License-Identifier: GPL-2.0+
Michal Simek6d6e3db2015-07-22 11:39:04 +02002/*
3 * Xilinx ZC770 XM013 board DTS
4 *
Michal Simek051a8ad2018-03-27 13:43:05 +02005 * Copyright (C) 2013-2018 Xilinx, Inc.
Michal Simek6d6e3db2015-07-22 11:39:04 +02006 */
7/dts-v1/;
8#include "zynq-7000.dtsi"
Michal Simekb347c142016-04-07 15:24:08 +02009
Michal Simek6d6e3db2015-07-22 11:39:04 +020010/ {
Luis Araneda9896dc62018-07-12 00:10:20 -040011 model = "Xilinx ZC770 XM011 board";
Michal Simek6d6e3db2015-07-22 11:39:04 +020012 compatible = "xlnx,zynq-zc770-xm011", "xlnx,zynq-7000";
Michal Simek6d6e3db2015-07-22 11:39:04 +020013
14 aliases {
15 i2c0 = &i2c1;
16 serial0 = &uart1;
17 spi0 = &spi0;
18 };
19
20 chosen {
Michal Simek936bbc52016-04-07 11:15:00 +020021 bootargs = "";
Michal Simek46919412016-01-12 13:56:44 +010022 stdout-path = "serial0:115200n8";
Michal Simek6d6e3db2015-07-22 11:39:04 +020023 };
24
Michal Simekcc7978b2016-11-11 13:11:37 +010025 memory@0 {
Michal Simek6d6e3db2015-07-22 11:39:04 +020026 device_type = "memory";
27 reg = <0x0 0x40000000>;
28 };
29
30 usb_phy1: phy1 {
31 compatible = "usb-nop-xceiv";
32 #phy-cells = <0>;
33 };
34};
35
Michal Simek6d6e3db2015-07-22 11:39:04 +020036&can0 {
37 status = "okay";
38};
39
40&i2c1 {
41 status = "okay";
42 clock-frequency = <400000>;
43
Michal Simek99a2e342018-03-27 13:48:51 +020044 eeprom: eeprom@52 {
45 compatible = "atmel,24c02";
Michal Simek6d6e3db2015-07-22 11:39:04 +020046 reg = <0x52>;
47 };
48};
49
Michal Simek4cd8bf42020-01-07 10:17:43 +010050&nand0 {
51 status = "okay";
52};
53
54&smcc {
55 status = "okay";
56};
57
Michal Simek7ebf67a2016-01-14 13:09:16 +010058&spi0 {
59 status = "okay";
60 num-cs = <4>;
61 is-decoded-cs = <0>;
62};
63
Michal Simek6d6e3db2015-07-22 11:39:04 +020064&uart1 {
Simon Glass035c6b22015-10-17 19:41:24 -060065 u-boot,dm-pre-reloc;
Michal Simek6d6e3db2015-07-22 11:39:04 +020066 status = "okay";
67};
68
69&usb1 {
70 status = "okay";
71 dr_mode = "host";
72 usb-phy = <&usb_phy1>;
73};