blob: 268da8ef6c9d3f910ded196e28b64a0ba0c64832 [file] [log] [blame]
Stefan Roesed7d76062019-04-05 13:44:43 +02001// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Copyright (C) 2019 Stefan Roese <sr@denx.de>
4 *
5 * Derived from linux/drivers/phy/ralink/phy-ralink-usb.c
6 * Copyright (C) 2017 John Crispin <john@phrozen.org>
7 */
8
9#include <common.h>
10#include <dm.h>
11#include <generic-phy.h>
12#include <regmap.h>
13#include <reset-uclass.h>
14#include <syscon.h>
15#include <asm/io.h>
16
17#define RT_SYSC_REG_SYSCFG1 0x014
18#define RT_SYSC_REG_CLKCFG1 0x030
19#define RT_SYSC_REG_USB_PHY_CFG 0x05c
20
21#define OFS_U2_PHY_AC0 0x800
22#define OFS_U2_PHY_AC1 0x804
23#define OFS_U2_PHY_AC2 0x808
24#define OFS_U2_PHY_ACR0 0x810
25#define OFS_U2_PHY_ACR1 0x814
26#define OFS_U2_PHY_ACR2 0x818
27#define OFS_U2_PHY_ACR3 0x81C
28#define OFS_U2_PHY_ACR4 0x820
29#define OFS_U2_PHY_AMON0 0x824
30#define OFS_U2_PHY_DCR0 0x860
31#define OFS_U2_PHY_DCR1 0x864
32#define OFS_U2_PHY_DTM0 0x868
33#define OFS_U2_PHY_DTM1 0x86C
34
35#define RT_RSTCTRL_UDEV BIT(25)
36#define RT_RSTCTRL_UHST BIT(22)
37#define RT_SYSCFG1_USB0_HOST_MODE BIT(10)
38
39#define MT7620_CLKCFG1_UPHY0_CLK_EN BIT(25)
40#define MT7620_CLKCFG1_UPHY1_CLK_EN BIT(22)
41#define RT_CLKCFG1_UPHY1_CLK_EN BIT(20)
42#define RT_CLKCFG1_UPHY0_CLK_EN BIT(18)
43
44#define USB_PHY_UTMI_8B60M BIT(1)
45#define UDEV_WAKEUP BIT(0)
46
47struct mt76x8_usb_phy {
48 u32 clk;
49 void __iomem *base;
50 struct regmap *sysctl;
51};
52
53static void u2_phy_w32(struct mt76x8_usb_phy *phy, u32 val, u32 reg)
54{
55 writel(val, phy->base + reg);
56}
57
58static u32 u2_phy_r32(struct mt76x8_usb_phy *phy, u32 reg)
59{
60 return readl(phy->base + reg);
61}
62
63static void mt76x8_usb_phy_init(struct mt76x8_usb_phy *phy)
64{
65 u2_phy_r32(phy, OFS_U2_PHY_AC2);
66 u2_phy_r32(phy, OFS_U2_PHY_ACR0);
67 u2_phy_r32(phy, OFS_U2_PHY_DCR0);
68
69 u2_phy_w32(phy, 0x00ffff02, OFS_U2_PHY_DCR0);
70 u2_phy_r32(phy, OFS_U2_PHY_DCR0);
71 u2_phy_w32(phy, 0x00555502, OFS_U2_PHY_DCR0);
72 u2_phy_r32(phy, OFS_U2_PHY_DCR0);
73 u2_phy_w32(phy, 0x00aaaa02, OFS_U2_PHY_DCR0);
74 u2_phy_r32(phy, OFS_U2_PHY_DCR0);
75 u2_phy_w32(phy, 0x00000402, OFS_U2_PHY_DCR0);
76 u2_phy_r32(phy, OFS_U2_PHY_DCR0);
77 u2_phy_w32(phy, 0x0048086a, OFS_U2_PHY_AC0);
78 u2_phy_w32(phy, 0x4400001c, OFS_U2_PHY_AC1);
79 u2_phy_w32(phy, 0xc0200000, OFS_U2_PHY_ACR3);
80 u2_phy_w32(phy, 0x02000000, OFS_U2_PHY_DTM0);
81}
82
83static int mt76x8_usb_phy_power_on(struct phy *_phy)
84{
85 struct mt76x8_usb_phy *phy = dev_get_priv(_phy->dev);
86 u32 t;
87
88 /* enable the phy */
89 regmap_update_bits(phy->sysctl, RT_SYSC_REG_CLKCFG1,
90 phy->clk, phy->clk);
91
92 /* setup host mode */
93 regmap_update_bits(phy->sysctl, RT_SYSC_REG_SYSCFG1,
94 RT_SYSCFG1_USB0_HOST_MODE,
95 RT_SYSCFG1_USB0_HOST_MODE);
96
97 /*
98 * The SDK kernel had a delay of 100ms. however on device
99 * testing showed that 10ms is enough
100 */
101 mdelay(10);
102
103 if (phy->base)
104 mt76x8_usb_phy_init(phy);
105
106 /* print some status info */
107 regmap_read(phy->sysctl, RT_SYSC_REG_USB_PHY_CFG, &t);
108 printf("remote usb device wakeup %s\n",
109 (t & UDEV_WAKEUP) ? "enabled" : "disabled");
110 if (t & USB_PHY_UTMI_8B60M)
111 printf("UTMI 8bit 60MHz\n");
112 else
113 printf("UTMI 16bit 30MHz\n");
114
115 return 0;
116}
117
118static int mt76x8_usb_phy_power_off(struct phy *_phy)
119{
120 struct mt76x8_usb_phy *phy = dev_get_priv(_phy->dev);
121
122 /* disable the phy */
123 regmap_update_bits(phy->sysctl, RT_SYSC_REG_CLKCFG1,
124 phy->clk, 0);
125
126 return 0;
127}
128
129static int mt76x8_usb_phy_probe(struct udevice *dev)
130{
131 struct mt76x8_usb_phy *phy = dev_get_priv(dev);
132
133 phy->sysctl = syscon_regmap_lookup_by_phandle(dev, "ralink,sysctl");
134 if (IS_ERR(phy->sysctl))
135 return PTR_ERR(phy->sysctl);
136
137 phy->base = dev_read_addr_ptr(dev);
138 if (!phy->base)
139 return -EINVAL;
140
141 return 0;
142}
143
144static struct phy_ops mt76x8_usb_phy_ops = {
145 .power_on = mt76x8_usb_phy_power_on,
146 .power_off = mt76x8_usb_phy_power_off,
147};
148
149static const struct udevice_id mt76x8_usb_phy_ids[] = {
150 { .compatible = "mediatek,mt7628-usbphy" },
151 { }
152};
153
154U_BOOT_DRIVER(mt76x8_usb_phy) = {
155 .name = "mt76x8_usb_phy",
156 .id = UCLASS_PHY,
157 .of_match = mt76x8_usb_phy_ids,
158 .ops = &mt76x8_usb_phy_ops,
159 .probe = mt76x8_usb_phy_probe,
160 .priv_auto_alloc_size = sizeof(struct mt76x8_usb_phy),
161};