Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 9243224687bd92674c693546a46f849b1a54c75c / . / include / configs / snapper9g45.h
blob: 59bba7d143e28642a96beea16b38b4701213d83a [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -0400[diff] [blame]1/* SPDX-License-Identifier: GPL-2.0+ */
Andre Renaud885fc032016-05-05 07:28:22 -0600[diff] [blame]2/*
3 * Bluewater Systems Snapper 9G45 module
4 *
5 * (C) Copyright 2011 Bluewater Systems
6 * Author: Andre Renaud <andre@bluewatersys.com>
7 * Author: Ryan Mallon <ryan@bluewatersys.com>
Andre Renaud885fc032016-05-05 07:28:22 -0600[diff] [blame]8 */
9
10#ifndef __CONFIG_H
11#define __CONFIG_H
12
13/* SoC type is defined in boards.cfg */
14#include <asm/hardware.h>
15#include <linux/sizes.h>
16
Andre Renaud885fc032016-05-05 07:28:22 -0600[diff] [blame]17/* ARM asynchronous clock */
18#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
19#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
20
21/* CPU */
Andre Renaud885fc032016-05-05 07:28:22 -0600[diff] [blame]22
23/* SDRAM */
Andre Renaud885fc032016-05-05 07:28:22 -0600[diff] [blame]24#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS6
25#define CONFIG_SYS_SDRAM_SIZE (128 * 1024 * 1024) /* 64MB */
Tom Rinieaf6ea62022-05-25 12:16:03 -0400[diff] [blame]26#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
27#define CONFIG_SYS_INIT_RAM_ADDR ATMEL_BASE_SRAM
Andre Renaud885fc032016-05-05 07:28:22 -0600[diff] [blame]28
29/* Mem test settings */
Andre Renaud885fc032016-05-05 07:28:22 -0600[diff] [blame]30
31/* NAND Flash */
Andre Renaud885fc032016-05-05 07:28:22 -0600[diff] [blame]32#define CONFIG_SYS_NAND_ECC_BASE ATMEL_BASE_ECC
Andre Renaud885fc032016-05-05 07:28:22 -0600[diff] [blame]33#define CONFIG_SYS_MAX_NAND_DEVICE 1
34#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
35#define CONFIG_SYS_NAND_DBW_8
36#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) /* AD21 */
37#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) /* AD22 */
38#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
39#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC8
40
Andre Renaud885fc032016-05-05 07:28:22 -0600[diff] [blame]41/* UARTs/Serial console */
Andre Renaud885fc032016-05-05 07:28:22 -0600[diff] [blame]42
43/* Boot options */
Andre Renaud885fc032016-05-05 07:28:22 -0600[diff] [blame]44
Andre Renaud885fc032016-05-05 07:28:22 -0600[diff] [blame]45/* Environment settings */
Andre Renaud885fc032016-05-05 07:28:22 -0600[diff] [blame]46
47#define CONFIG_EXTRA_ENV_SETTINGS \
48 "ethaddr=00:00:00:00:00:00\0" \
49 "serial=0\0" \
50 "stdout=serial_atmel\0" \
51 "stderr=serial_atmel\0" \
52 "stdin=serial_atmel\0" \
53 "bootlimit=3\0" \
54 "loadaddr=0x71000000\0" \
55 "board_rev=2\0" \
56 "bootfile=/tftpboot/uImage\0" \
57 "bootargs_def=console=ttyS0,115200 panic=5 quiet lpj=997376\0" \
58 "nfsroot=/export/root\0" \
59 "boot_working=setenv bootargs $bootargs_def; nboot $loadaddr 0 0x20c0000 && bootm\0" \
60 "boot_safe=setenv bootargs $bootargs_def; nboot $loadaddr 0 0xc0000 && bootm\0" \
61 "boot_tftp=setenv bootargs $bootargs_def ip=any nfsroot=$nfsroot; setenv autoload y && bootp && bootm\0" \
62 "boot_usb=setenv bootargs $bootargs_def; usb start && usb storage && fatload usb 0:1 $loadaddr dds-xm200.bin && bootm\0" \
63 "boot_mmc=setenv bootargs $bootargs_def; mmc rescan && fatload mmc 0:1 $loadaddr dds-xm200.bin && bootm\0" \
64 "bootcmd=run boot_mmc ; run boot_usb ; run boot_working ; run boot_safe\0" \
65 "altbootcmd=run boot_mmc ; run boot_usb ; run boot_safe ; run boot_working\0"
66
67/* Console settings */
Andre Renaud885fc032016-05-05 07:28:22 -0600[diff] [blame]68
Andre Renaud885fc032016-05-05 07:28:22 -0600[diff] [blame]69#endif /* __CONFIG_H */