Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 936e9cd39260559b6c3f931038fe3f2173e43605 / . / include / configs / lx2160ardb.h
blob: 097f1224c90fa157f57df41df3d7b405ddfa8073 [file] [log] [blame]
Priyanka Jain58c3e622018-11-28 13:04:27 +0000[diff] [blame]1/* SPDX-License-Identifier: GPL-2.0+ */
2/*
Meenakshi Aggarwal69b38942020-01-10 20:13:19 +0530[diff] [blame]3 * Copyright 2018,2020 NXP
Priyanka Jain58c3e622018-11-28 13:04:27 +0000[diff] [blame]4 */
5
6#ifndef __LX2_RDB_H
7#define __LX2_RDB_H
8
9#include "lx2160a_common.h"
10
Priyanka Jain58c3e622018-11-28 13:04:27 +0000[diff] [blame]11/* VID */
Priyanka Jain58c3e622018-11-28 13:04:27 +0000[diff] [blame]12#define CONFIG_VID_FLS_ENV "lx2160ardb_vdd_mv"
13#define CONFIG_VID
Priyanka Jain58c3e622018-11-28 13:04:27 +0000[diff] [blame]14#define CONFIG_VOL_MONITOR_LTC3882_SET
15#define CONFIG_VOL_MONITOR_LTC3882_READ
16
17/* RTC */
18#define CONFIG_SYS_RTC_BUS_NUM 4
19
20/* MAC/PHY configuration */
21#if defined(CONFIG_FSL_MC_ENET)
22#define CONFIG_MII
23#define CONFIG_ETHPRIME "DPMAC1@xgmii"
Priyanka Jain58c3e622018-11-28 13:04:27 +0000[diff] [blame]24#endif
25
Meenakshi Aggarwal938e35e2018-11-30 22:32:12 +0530[diff] [blame]26/* EMC2305 */
27#define I2C_MUX_CH_EMC2305 0x09
28#define I2C_EMC2305_ADDR 0x4D
29#define I2C_EMC2305_CMD 0x40
30#define I2C_EMC2305_PWM 0x80
31
Priyanka Jain58c3e622018-11-28 13:04:27 +0000[diff] [blame]32/* EEPROM */
33#define CONFIG_ID_EEPROM
34#define CONFIG_SYS_I2C_EEPROM_NXID
35#define CONFIG_SYS_EEPROM_BUS_NUM 0
36#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
37#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
38#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
39#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
40
41/* Initial environment variables */
42#define CONFIG_EXTRA_ENV_SETTINGS \
Priyanka Jain3e1a9b52019-01-24 05:22:18 +0000[diff] [blame]43 EXTRA_ENV_SETTINGS \
Meenakshi Aggarwal69b38942020-01-10 20:13:19 +0530[diff] [blame]44 "boot_scripts=lx2160ardb_boot.scr\0" \
45 "boot_script_hdr=hdr_lx2160ardb_bs.out\0" \
Priyanka Jain3e1a9b52019-01-24 05:22:18 +0000[diff] [blame]46 "BOARD=lx2160ardb\0" \
47 "xspi_bootcmd=echo Trying load from flexspi..;" \
48 "sf probe 0:0 && sf read $load_addr " \
49 "$kernel_start $kernel_size ; env exists secureboot &&" \
50 "sf read $kernelheader_addr_r $kernelheader_start " \
51 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
52 " bootm $load_addr#$BOARD\0" \
53 "sd_bootcmd=echo Trying load from sd card..;" \
Meenakshi Aggarwale5f11112020-09-01 12:56:28 +0530[diff] [blame]54 "mmc dev 0; mmcinfo; mmc read $load_addr " \
Priyanka Jain3e1a9b52019-01-24 05:22:18 +0000[diff] [blame]55 "$kernel_addr_sd $kernel_size_sd ;" \
56 "env exists secureboot && mmc read $kernelheader_addr_r "\
57 "$kernelhdr_addr_sd $kernelhdr_size_sd " \
58 " && esbc_validate ${kernelheader_addr_r};" \
Meenakshi Aggarwalb7e7a462020-02-19 23:30:45 +0530[diff] [blame]59 "bootm $load_addr#$BOARD\0" \
60 "sd2_bootcmd=echo Trying load from emmc card..;" \
61 "mmc dev 1; mmcinfo; mmc read $load_addr " \
62 "$kernel_addr_sd $kernel_size_sd ;" \
63 "env exists secureboot && mmc read $kernelheader_addr_r "\
64 "$kernelhdr_addr_sd $kernelhdr_size_sd " \
65 " && esbc_validate ${kernelheader_addr_r};" \
Priyanka Jain3e1a9b52019-01-24 05:22:18 +0000[diff] [blame]66 "bootm $load_addr#$BOARD\0"
Priyanka Jain58c3e622018-11-28 13:04:27 +0000[diff] [blame]67
68#include <asm/fsl_secure_boot.h>
69
70#endif /* __LX2_RDB_H */