Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 957b4ee3f3114663f120f5003d14e4fa366198fd / . / arch / arm / dts / imx6ull.dtsi
blob: 65950e8019d4540ca2b8ebf7f12374e35f06f314 [file] [log] [blame]
Peng Fanb0a8e452016-08-11 14:02:55 +0800[diff] [blame]1/*
2 * Copyright 2015-2016 Freescale Semiconductor, Inc.
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 */
8
9#include <dt-bindings/clock/imx6ul-clock.h>
10#include <dt-bindings/gpio/gpio.h>
11#include <dt-bindings/interrupt-controller/arm-gic.h>
12#include "imx6ull-pinfunc.h"
13#include "imx6ull-pinfunc-snvs.h"
14#include "skeleton.dtsi"
15
16/ {
17 aliases {
18 can0 = &flexcan1;
19 can1 = &flexcan2;
20 ethernet0 = &fec1;
21 ethernet1 = &fec2;
22 gpio0 = &gpio1;
23 gpio1 = &gpio2;
24 gpio2 = &gpio3;
25 gpio3 = &gpio4;
26 gpio4 = &gpio5;
27 i2c0 = &i2c1;
28 i2c1 = &i2c2;
29 i2c2 = &i2c3;
30 i2c3 = &i2c4;
31 mmc0 = &usdhc1;
32 mmc1 = &usdhc2;
33 serial0 = &uart1;
34 serial1 = &uart2;
35 serial2 = &uart3;
36 serial3 = &uart4;
37 serial4 = &uart5;
38 serial5 = &uart6;
39 serial6 = &uart7;
40 serial7 = &uart8;
41 spi0 = &ecspi1;
42 spi1 = &ecspi2;
43 spi2 = &ecspi3;
44 spi3 = &ecspi4;
45 usbphy0 = &usbphy1;
46 usbphy1 = &usbphy2;
47 };
48
49 cpus {
50 #address-cells = <1>;
51 #size-cells = <0>;
52
53 cpu0: cpu@0 {
54 compatible = "arm,cortex-a7";
55 device_type = "cpu";
56 reg = <0>;
57 clock-latency = <61036>; /* two CLK32 periods */
58 operating-points = <
59 /* kHz uV */
60 528000 1175000
61 99000 950000
62 >;
63 fsl,soc-operating-points = <
64 /* KHz uV */
65 528000 1175000
66 99000 1175000
67 >;
68 clocks = <&clks IMX6UL_CLK_ARM>,
69 <&clks IMX6UL_CLK_PLL2_BUS>,
70 <&clks IMX6UL_CLK_PLL2_PFD2>,
71 <&clks IMX6UL_CA7_SECONDARY_SEL>,
72 <&clks IMX6UL_CLK_STEP>,
73 <&clks IMX6UL_CLK_PLL1_SW>,
74 <&clks IMX6UL_CLK_PLL1_SYS>,
75 <&clks IMX6UL_PLL1_BYPASS>,
76 <&clks IMX6UL_CLK_PLL1>,
77 <&clks IMX6UL_PLL1_BYPASS_SRC>,
78 <&clks IMX6UL_CLK_OSC>;
79 clock-names = "arm", "pll2_bus", "pll2_pfd2_396m", "secondary_sel", "step",
80 "pll1_sw", "pll1_sys", "pll1_bypass", "pll1", "pll1_bypass_src", "osc";
81 };
82 };
83
84 intc: interrupt-controller@00a01000 {
85 compatible = "arm,cortex-a7-gic";
86 #interrupt-cells = <3>;
87 interrupt-controller;
88 reg = <0x00a01000 0x1000>,
89 <0x00a02000 0x100>;
90 };
91
92 clocks {
93 #address-cells = <1>;
94 #size-cells = <0>;
95
96 ckil: clock@0 {
97 compatible = "fixed-clock";
98 reg = <0>;
99 #clock-cells = <0>;
100 clock-frequency = <32768>;
101 clock-output-names = "ckil";
102 };
103
104 osc: clock@1 {
105 compatible = "fixed-clock";
106 reg = <1>;
107 #clock-cells = <0>;
108 clock-frequency = <24000000>;
109 clock-output-names = "osc";
110 };
111
112 ipp_di0: clock@2 {
113 compatible = "fixed-clock";
114 reg = <2>;
115 #clock-cells = <0>;
116 clock-frequency = <0>;
117 clock-output-names = "ipp_di0";
118 };
119
120 ipp_di1: clock@3 {
121 compatible = "fixed-clock";
122 reg = <3>;
123 #clock-cells = <0>;
124 clock-frequency = <0>;
125 clock-output-names = "ipp_di1";
126 };
127 };
128
129 soc {
130 #address-cells = <1>;
131 #size-cells = <1>;
132 compatible = "simple-bus";
133 interrupt-parent = <&gpc>;
134 ranges;
135
136 busfreq {
137 compatible = "fsl,imx_busfreq";
138 clocks = <&clks IMX6UL_CLK_PLL2_PFD2>, <&clks IMX6UL_CLK_PLL2_198M>,
139 <&clks IMX6UL_CLK_PLL2_BUS>, <&clks IMX6UL_CLK_ARM>,
140 <&clks IMX6UL_CLK_PLL3_USB_OTG>, <&clks IMX6UL_CLK_PERIPH>,
141 <&clks IMX6UL_CLK_PERIPH_PRE>, <&clks IMX6UL_CLK_PERIPH_CLK2>,
142 <&clks IMX6UL_CLK_PERIPH_CLK2_SEL>, <&clks IMX6UL_CLK_OSC>,
143 <&clks IMX6UL_CLK_AHB>, <&clks IMX6UL_CLK_AXI>,
144 <&clks IMX6UL_CLK_PERIPH2>, <&clks IMX6UL_CLK_PERIPH2_PRE>,
145 <&clks IMX6UL_CLK_PERIPH2_CLK2>, <&clks IMX6UL_CLK_PERIPH2_CLK2_SEL>,
146 <&clks IMX6UL_CLK_STEP>, <&clks IMX6UL_CLK_MMDC_P0_FAST>, <&clks IMX6UL_PLL1_BYPASS_SRC>,
147 <&clks IMX6UL_PLL1_BYPASS>, <&clks IMX6UL_CLK_PLL1_SYS>, <&clks IMX6UL_CLK_PLL1_SW>,
148 <&clks IMX6UL_CLK_PLL1>;
149 clock-names = "pll2_pfd2_396m", "pll2_198m", "pll2_bus", "arm", "pll3_usb_otg",
150 "periph", "periph_pre", "periph_clk2", "periph_clk2_sel", "osc",
151 "ahb", "ocram", "periph2", "periph2_pre", "periph2_clk2", "periph2_clk2_sel",
152 "step", "mmdc", "pll1_bypass_src", "pll1_bypass", "pll1_sys", "pll1_sw", "pll1";
153 fsl,max_ddr_freq = <400000000>;
154 };
155
156 pmu {
157 compatible = "arm,cortex-a7-pmu";
158 interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
159 status = "disabled";
160 };
161
162 ocrams: sram@00900000 {
163 compatible = "fsl,lpm-sram";
164 reg = <0x00900000 0x4000>;
165 };
166
167 ocrams_ddr: sram@00904000 {
168 compatible = "fsl,ddr-lpm-sram";
169 reg = <0x00904000 0x1000>;
170 };
171
172 ocram: sram@00905000 {
173 compatible = "mmio-sram";
174 reg = <0x00905000 0x1B000>;
175 };
176
177 dma_apbh: dma-apbh@01804000 {
178 compatible = "fsl,imx6ul-dma-apbh", "fsl,imx28-dma-apbh";
179 reg = <0x01804000 0x2000>;
180 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
181 <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
182 <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
183 <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
184 interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
185 #dma-cells = <1>;
186 dma-channels = <4>;
187 clocks = <&clks IMX6UL_CLK_APBHDMA>;
188 };
189
190 gpmi: gpmi-nand@01806000{
191 compatible = "fsl,imx6ull-gpmi-nand", "fsl, imx6ul-gpmi-nand";
192 #address-cells = <1>;
193 #size-cells = <1>;
194 reg = <0x01806000 0x2000>, <0x01808000 0x4000>;
195 reg-names = "gpmi-nand", "bch";
196 interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
197 interrupt-names = "bch";
198 clocks = <&clks IMX6UL_CLK_GPMI_IO>,
199 <&clks IMX6UL_CLK_GPMI_APB>,
200 <&clks IMX6UL_CLK_GPMI_BCH>,
201 <&clks IMX6UL_CLK_GPMI_BCH_APB>,
202 <&clks IMX6UL_CLK_PER_BCH>;
203 clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
204 "gpmi_bch_apb", "per1_bch";
205 dmas = <&dma_apbh 0>;
206 dma-names = "rx-tx";
207 status = "disabled";
208 };
209
210 aips1: aips-bus@02000000 {
211 compatible = "fsl,aips-bus", "simple-bus";
212 #address-cells = <1>;
213 #size-cells = <1>;
214 reg = <0x02000000 0x100000>;
215 ranges;
216
217 spba-bus@02000000 {
218 compatible = "fsl,spba-bus", "simple-bus";
219 #address-cells = <1>;
220 #size-cells = <1>;
221 reg = <0x02000000 0x40000>;
222 ranges;
223
224 spdif: spdif@02004000 {
225 compatible = "fsl,imx6ul-spdif", "fsl,imx35-spdif";
226 reg = <0x02004000 0x4000>;
227 interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
228 dmas = <&sdma 41 18 0>,
229 <&sdma 42 18 0>;
230 dma-names = "rx", "tx";
231 clocks = <&clks IMX6UL_CLK_SPDIF_GCLK>,
232 <&clks IMX6UL_CLK_OSC>,
233 <&clks IMX6UL_CLK_SPDIF>,
234 <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>,
235 <&clks IMX6UL_CLK_IPG>,
236 <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>,
237 <&clks IMX6UL_CLK_SPBA>;
238 clock-names = "core", "rxtx0",
239 "rxtx1", "rxtx2",
240 "rxtx3", "rxtx4",
241 "rxtx5", "rxtx6",
242 "rxtx7", "dma";
243 status = "disabled";
244 };
245
246 ecspi1: ecspi@02008000 {
247 #address-cells = <1>;
248 #size-cells = <0>;
249 compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
250 reg = <0x02008000 0x4000>;
251 interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
252 clocks = <&clks IMX6UL_CLK_ECSPI1>,
253 <&clks IMX6UL_CLK_ECSPI1>;
254 clock-names = "ipg", "per";
255 dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
256 dma-names = "rx", "tx";
257 status = "disabled";
258 };
259
260 ecspi2: ecspi@0200c000 {
261 #address-cells = <1>;
262 #size-cells = <0>;
263 compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
264 reg = <0x0200c000 0x4000>;
265 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
266 clocks = <&clks IMX6UL_CLK_ECSPI2>,
267 <&clks IMX6UL_CLK_ECSPI2>;
268 clock-names = "ipg", "per";
269 dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
270 dma-names = "rx", "tx";
271 status = "disabled";
272 };
273
274 ecspi3: ecspi@02010000 {
275 #address-cells = <1>;
276 #size-cells = <0>;
277 compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
278 reg = <0x02010000 0x4000>;
279 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
280 clocks = <&clks IMX6UL_CLK_ECSPI3>,
281 <&clks IMX6UL_CLK_ECSPI3>;
282 clock-names = "ipg", "per";
283 dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
284 dma-names = "rx", "tx";
285 status = "disabled";
286 };
287
288 ecspi4: ecspi@02014000 {
289 #address-cells = <1>;
290 #size-cells = <0>;
291 compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
292 reg = <0x02014000 0x4000>;
293 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
294 clocks = <&clks IMX6UL_CLK_ECSPI4>,
295 <&clks IMX6UL_CLK_ECSPI4>;
296 clock-names = "ipg", "per";
297 dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
298 dma-names = "rx", "tx";
299 status = "disabled";
300 };
301
302 uart7: serial@02018000 {
303 compatible = "fsl,imx6ul-uart",
304 "fsl,imx6q-uart", "fsl,imx21-uart";
305 reg = <0x02018000 0x4000>;
306 interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
307 clocks = <&clks IMX6UL_CLK_UART7_IPG>,
308 <&clks IMX6UL_CLK_UART7_SERIAL>;
309 clock-names = "ipg", "per";
310 dmas = <&sdma 43 4 0>, <&sdma 44 4 0>;
311 dma-names = "rx", "tx";
312 status = "disabled";
313 };
314
315 uart1: serial@02020000 {
316 compatible = "fsl,imx6ul-uart",
317 "fsl,imx6q-uart", "fsl,imx21-uart";
318 reg = <0x02020000 0x4000>;
319 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
320 clocks = <&clks IMX6UL_CLK_UART1_IPG>,
321 <&clks IMX6UL_CLK_UART1_SERIAL>;
322 clock-names = "ipg", "per";
323 status = "disabled";
324 };
325
326 esai: esai@02024000 {
327 compatible = "fsl,imx6ull-esai";
328 reg = <0x02024000 0x4000>;
329 interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
330 clocks = <&clks IMX6UL_CLK_ESAI_IPG>,
331 <&clks IMX6UL_CLK_ESAI_MEM>,
332 <&clks IMX6UL_CLK_ESAI_EXTAL>,
333 <&clks IMX6UL_CLK_ESAI_IPG>,
334 <&clks IMX6UL_CLK_SPBA>;
335 clock-names = "core", "mem", "extal",
336 "fsys", "dma";
337 dmas = <&sdma 0 21 0>, <&sdma 47 21 0>;
338 dma-names = "rx", "tx";
339 dma-source = <&gpr 0 14 0 15>;
340 status = "disabled";
341 };
342
343 sai1: sai@02028000 {
344 compatible = "fsl,imx6ul-sai",
345 "fsl,imx6sx-sai";
346 reg = <0x02028000 0x4000>;
347 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
348 clocks = <&clks IMX6UL_CLK_SAI1_IPG>,
349 <&clks IMX6UL_CLK_DUMMY>,
350 <&clks IMX6UL_CLK_SAI1>,
351 <&clks 0>, <&clks 0>;
352 clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
353 dma-names = "rx", "tx";
354 dmas = <&sdma 35 24 0>, <&sdma 36 24 0>;
355 status = "disabled";
356 };
357
358 sai2: sai@0202c000 {
359 compatible = "fsl,imx6ul-sai",
360 "fsl,imx6sx-sai";
361 reg = <0x0202c000 0x4000>;
362 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
363 clocks = <&clks IMX6UL_CLK_SAI2_IPG>,
364 <&clks IMX6UL_CLK_DUMMY>,
365 <&clks IMX6UL_CLK_SAI2>,
366 <&clks 0>, <&clks 0>;
367 clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
368 dma-names = "rx", "tx";
369 dmas = <&sdma 37 24 0>, <&sdma 38 24 0>;
370 status = "disabled";
371 };
372
373 sai3: sai@02030000 {
374 compatible = "fsl,imx6ul-sai",
375 "fsl,imx6sx-sai";
376 reg = <0x02030000 0x4000>;
377 interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
378 clocks = <&clks IMX6UL_CLK_SAI3_IPG>,
379 <&clks IMX6UL_CLK_DUMMY>,
380 <&clks IMX6UL_CLK_SAI3>,
381 <&clks 0>, <&clks 0>;
382 clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
383 dma-names = "rx", "tx";
384 dmas = <&sdma 39 24 0>, <&sdma 40 24 0>;
385 status = "disabled";
386 };
387
388 asrc: asrc@02034000 {
389 compatible = "fsl,imx53-asrc";
390 reg = <0x02034000 0x4000>;
391 interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
392 clocks = <&clks IMX6UL_CLK_ASRC_IPG>,
393 <&clks IMX6UL_CLK_ASRC_MEM>, <&clks 0>,
394 <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
395 <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
396 <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
397 <&clks IMX6UL_CLK_SPDIF>, <&clks 0>, <&clks 0>,
398 <&clks IMX6UL_CLK_SPBA>;
399 clock-names = "mem", "ipg", "asrck_0",
400 "asrck_1", "asrck_2", "asrck_3", "asrck_4",
401 "asrck_5", "asrck_6", "asrck_7", "asrck_8",
402 "asrck_9", "asrck_a", "asrck_b", "asrck_c",
403 "asrck_d", "asrck_e", "asrck_f", "dma";
404 dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
405 <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
406 dma-names = "rxa", "rxb", "rxc",
407 "txa", "txb", "txc";
408 fsl,asrc-rate = <48000>;
409 fsl,asrc-width = <16>;
410 status = "okay";
411 };
412 };
413
414 tsc: tsc@02040000 {
415 compatible = "fsl,imx6ul-tsc";
416 reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
417 interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
418 <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
419 clocks = <&clks IMX6UL_CLK_IPG>,
420 <&clks IMX6UL_CLK_ADC2>;
421 clock-names = "tsc", "adc";
422 status = "disabled";
423 };
424
425 pwm1: pwm@02080000 {
426 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
427 reg = <0x02080000 0x4000>;
428 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
429 clocks = <&clks IMX6UL_CLK_PWM1>,
430 <&clks IMX6UL_CLK_PWM1>;
431 clock-names = "ipg", "per";
432 #pwm-cells = <2>;
433 };
434
435 pwm2: pwm@02084000 {
436 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
437 reg = <0x02084000 0x4000>;
438 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
439 clocks = <&clks IMX6UL_CLK_DUMMY>,
440 <&clks IMX6UL_CLK_DUMMY>;
441 clock-names = "ipg", "per";
442 #pwm-cells = <2>;
443 };
444
445 pwm3: pwm@02088000 {
446 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
447 reg = <0x02088000 0x4000>;
448 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
449 clocks = <&clks IMX6UL_CLK_PWM3>,
450 <&clks IMX6UL_CLK_PWM3>;
451 clock-names = "ipg", "per";
452 #pwm-cells = <2>;
453 };
454
455 pwm4: pwm@0208c000 {
456 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
457 reg = <0x0208c000 0x4000>;
458 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
459 clocks = <&clks IMX6UL_CLK_DUMMY>,
460 <&clks IMX6UL_CLK_DUMMY>;
461 clock-names = "ipg", "per";
462 #pwm-cells = <2>;
463 };
464
465 flexcan1: can@02090000 {
466 compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
467 reg = <0x02090000 0x4000>;
468 interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
469 clocks = <&clks IMX6UL_CLK_CAN1_IPG>,
470 <&clks IMX6UL_CLK_CAN1_SERIAL>;
471 clock-names = "ipg", "per";
472 stop-mode = <&gpr 0x10 1 0x10 17>;
473 status = "disabled";
474 };
475
476 flexcan2: can@02094000 {
477 compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
478 reg = <0x02094000 0x4000>;
479 interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
480 clocks = <&clks IMX6UL_CLK_CAN2_IPG>,
481 <&clks IMX6UL_CLK_CAN2_SERIAL>;
482 clock-names = "ipg", "per";
483 stop-mode = <&gpr 0x10 2 0x10 18>;
484 status = "disabled";
485 };
486
487 gpt1: gpt@02098000 {
488 compatible = "fsl,imx6ul-gpt", "fsl,imx31-gpt";
489 reg = <0x02098000 0x4000>;
490 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
491 clocks = <&clks IMX6UL_CLK_GPT1_BUS>,
492 <&clks IMX6UL_CLK_GPT1_SERIAL>;
493 clock-names = "ipg", "per";
494 };
495
496 gpio1: gpio@0209c000 {
497 compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
498 reg = <0x0209c000 0x4000>;
499 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
500 <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
501 gpio-controller;
502 #gpio-cells = <2>;
503 interrupt-controller;
504 #interrupt-cells = <2>;
505 };
506
507 gpio2: gpio@020a0000 {
508 compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
509 reg = <0x020a0000 0x4000>;
510 interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
511 <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
512 gpio-controller;
513 #gpio-cells = <2>;
514 interrupt-controller;
515 #interrupt-cells = <2>;
516 };
517
518 gpio3: gpio@020a4000 {
519 compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
520 reg = <0x020a4000 0x4000>;
521 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
522 <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
523 gpio-controller;
524 #gpio-cells = <2>;
525 interrupt-controller;
526 #interrupt-cells = <2>;
527 };
528
529 gpio4: gpio@020a8000 {
530 compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
531 reg = <0x020a8000 0x4000>;
532 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
533 <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
534 gpio-controller;
535 #gpio-cells = <2>;
536 interrupt-controller;
537 #interrupt-cells = <2>;
538 };
539
540 gpio5: gpio@020ac000 {
541 compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
542 reg = <0x020ac000 0x4000>;
543 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
544 <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
545 gpio-controller;
546 #gpio-cells = <2>;
547 interrupt-controller;
548 #interrupt-cells = <2>;
549 };
550
551 snvslp: snvs@020b0000 {
552 compatible = "fsl,imx6ul-snvs";
553 reg = <0x020b0000 0x4000>;
554 interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
555 };
556
557 fec2: ethernet@020b4000 {
558 compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
559 reg = <0x020b4000 0x4000>;
560 interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
561 <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
562 clocks = <&clks IMX6UL_CLK_ENET>,
563 <&clks IMX6UL_CLK_ENET_AHB>,
564 <&clks IMX6UL_CLK_ENET_PTP>,
565 <&clks IMX6UL_CLK_ENET2_REF_125M>,
566 <&clks IMX6UL_CLK_ENET2_REF_125M>;
567 clock-names = "ipg", "ahb", "ptp",
568 "enet_clk_ref", "enet_out";
569 stop-mode = <&gpr 0x10 4>;
570 fsl,num-tx-queues=<1>;
571 fsl,num-rx-queues=<1>;
572 fsl,magic-packet;
573 fsl,wakeup_irq = <0>;
574 status = "disabled";
575 };
576
577 kpp: kpp@020b8000 {
578 compatible = "fsl,imx6ul-kpp", "fsl,imx21-kpp";
579 reg = <0x020b8000 0x4000>;
580 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
581 clocks = <&clks IMX6UL_CLK_DUMMY>;
582 status = "disabled";
583 };
584
585 wdog1: wdog@020bc000 {
586 compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
587 reg = <0x020bc000 0x4000>;
588 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
589 clocks = <&clks IMX6UL_CLK_WDOG1>;
590 };
591
592 wdog2: wdog@020c0000 {
593 compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
594 reg = <0x020c0000 0x4000>;
595 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
596 clocks = <&clks IMX6UL_CLK_WDOG2>;
597 status = "disabled";
598 };
599
600 clks: ccm@020c4000 {
601 compatible = "fsl,imx6ul-ccm";
602 reg = <0x020c4000 0x4000>;
603 interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
604 <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
605 #clock-cells = <1>;
606 clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
607 clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
608 };
609
610 anatop: anatop@020c8000 {
611 compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop",
612 "syscon", "simple-bus";
613 reg = <0x020c8000 0x1000>;
614 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
615 <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
616 <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
617
618 reg_3p0: regulator-3p0@120 {
619 compatible = "fsl,anatop-regulator";
620 regulator-name = "vdd3p0";
621 regulator-min-microvolt = <2625000>;
622 regulator-max-microvolt = <3400000>;
623 anatop-reg-offset = <0x120>;
624 anatop-vol-bit-shift = <8>;
625 anatop-vol-bit-width = <5>;
626 anatop-min-bit-val = <0>;
627 anatop-min-voltage = <2625000>;
628 anatop-max-voltage = <3400000>;
629 anatop-enable-bit = <0>;
630 };
631
632 reg_arm: regulator-vddcore@140 {
633 compatible = "fsl,anatop-regulator";
634 regulator-name = "cpu";
635 regulator-min-microvolt = <725000>;
636 regulator-max-microvolt = <1450000>;
637 regulator-always-on;
638 anatop-reg-offset = <0x140>;
639 anatop-vol-bit-shift = <0>;
640 anatop-vol-bit-width = <5>;
641 anatop-delay-reg-offset = <0x170>;
642 anatop-delay-bit-shift = <24>;
643 anatop-delay-bit-width = <2>;
644 anatop-min-bit-val = <1>;
645 anatop-min-voltage = <725000>;
646 anatop-max-voltage = <1450000>;
647 };
648
649 reg_soc: regulator-vddsoc@140 {
650 compatible = "fsl,anatop-regulator";
651 regulator-name = "vddsoc";
652 regulator-min-microvolt = <725000>;
653 regulator-max-microvolt = <1450000>;
654 regulator-always-on;
655 anatop-reg-offset = <0x140>;
656 anatop-vol-bit-shift = <18>;
657 anatop-vol-bit-width = <5>;
658 anatop-delay-reg-offset = <0x170>;
659 anatop-delay-bit-shift = <28>;
660 anatop-delay-bit-width = <2>;
661 anatop-min-bit-val = <1>;
662 anatop-min-voltage = <725000>;
663 anatop-max-voltage = <1450000>;
664 };
665 };
666
667 usbphy1: usbphy@020c9000 {
668 compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
669 reg = <0x020c9000 0x1000>;
670 interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
671 clocks = <&clks IMX6UL_CLK_USBPHY1>;
672 phy-3p0-supply = <&reg_3p0>;
673 fsl,anatop = <&anatop>;
674 };
675
676 usbphy2: usbphy@020ca000 {
677 compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
678 reg = <0x020ca000 0x1000>;
679 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
680 clocks = <&clks IMX6UL_CLK_USBPHY2>;
681 phy-3p0-supply = <&reg_3p0>;
682 fsl,anatop = <&anatop>;
683 };
684
685 tempmon: tempmon {
686 compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon";
687 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
688 fsl,tempmon = <&anatop>;
689 fsl,tempmon-data = <&ocotp>;
690 clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>;
691 };
692
693 snvs: snvs@020cc000 {
694 compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
695 reg = <0x020cc000 0x4000>;
696
697 snvs_rtc: snvs-rtc-lp {
698 compatible = "fsl,sec-v4.0-mon-rtc-lp";
699 regmap = <&snvs>;
700 offset = <0x34>;
701 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
702 };
703
704 snvs_poweroff: snvs-poweroff {
705 compatible = "syscon-poweroff";
706 regmap = <&snvs>;
707 offset = <0x38>;
708 mask = <0x61>;
709 };
710
711 snvs_pwrkey: snvs-powerkey {
712 compatible = "fsl,sec-v4.0-pwrkey";
713 regmap = <&snvs>;
714 interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
715 linux,keycode = <KEY_POWER>;
716 wakeup;
717 };
718 };
719
720 epit1: epit@020d0000 {
721 reg = <0x020d0000 0x4000>;
722 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
723 };
724
725 epit2: epit@020d4000 {
726 reg = <0x020d4000 0x4000>;
727 interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
728 };
729
730 src: src@020d8000 {
731 compatible = "fsl,imx6ul-src", "fsl,imx51-src";
732 reg = <0x020d8000 0x4000>;
733 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
734 <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
735 #reset-cells = <1>;
736 };
737
738 gpc: gpc@020dc000 {
739 compatible = "fsl,imx6ul-gpc", "fsl,imx6q-gpc";
740 reg = <0x020dc000 0x4000>;
741 interrupt-controller;
742 #interrupt-cells = <3>;
743 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
744 interrupt-parent = <&intc>;
745 fsl,mf-mix-wakeup-irq = <0xfc00000 0x7d00 0x0 0x1400640>;
746 };
747
748 iomuxc: iomuxc@020e0000 {
749 compatible = "fsl,imx6ul-iomuxc";
750 reg = <0x020e0000 0x4000>;
751 };
752
753 gpr: iomuxc-gpr@020e4000 {
754 compatible = "fsl,imx6ul-iomuxc-gpr", "syscon";
755 reg = <0x020e4000 0x4000>;
756 };
757
758 mqs: mqs {
759 compatible = "fsl,imx6sx-mqs";
760 gpr = <&gpr>;
761 status = "disabled";
762 };
763
764 gpt2: gpt@020e8000 {
765 compatible = "fsl,imx6ul-gpt", "fsl,imx31-gpt";
766 reg = <0x020e8000 0x4000>;
767 interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
768 clocks = <&clks IMX6UL_CLK_DUMMY>,
769 <&clks IMX6UL_CLK_DUMMY>;
770 clock-names = "ipg", "per";
771 };
772
773 sdma: sdma@020ec000 {
774 compatible = "fsl,imx6ul-sdma", "fsl,imx35-sdma";
775 reg = <0x020ec000 0x4000>;
776 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
777 clocks = <&clks IMX6UL_CLK_SDMA>,
778 <&clks IMX6UL_CLK_SDMA>;
779 clock-names = "ipg", "ahb";
780 #dma-cells = <3>;
781 iram = <&ocram>;
782 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
783 };
784
785 pwm5: pwm@020f0000 {
786 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
787 reg = <0x020f0000 0x4000>;
788 interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
789 clocks = <&clks IMX6UL_CLK_DUMMY>,
790 <&clks IMX6UL_CLK_DUMMY>;
791 clock-names = "ipg", "per";
792 #pwm-cells = <2>;
793 };
794
795 pwm6: pwm@020f4000 {
796 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
797 reg = <0x020f4000 0x4000>;
798 interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
799 clocks = <&clks IMX6UL_CLK_DUMMY>,
800 <&clks IMX6UL_CLK_DUMMY>;
801 clock-names = "ipg", "per";
802 #pwm-cells = <2>;
803 };
804
805 pwm7: pwm@020f8000 {
806 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
807 reg = <0x020f8000 0x4000>;
808 interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
809 clocks = <&clks IMX6UL_CLK_DUMMY>,
810 <&clks IMX6UL_CLK_DUMMY>;
811 clock-names = "ipg", "per";
812 #pwm-cells = <2>;
813 };
814
815 pwm8: pwm@020fc000 {
816 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
817 reg = <0x020fc000 0x4000>;
818 interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
819 clocks = <&clks IMX6UL_CLK_DUMMY>,
820 <&clks IMX6UL_CLK_DUMMY>;
821 clock-names = "ipg", "per";
822 #pwm-cells = <2>;
823 };
824 };
825
826 aips2: aips-bus@02100000 {
827 compatible = "fsl,aips-bus", "simple-bus";
828 #address-cells = <1>;
829 #size-cells = <1>;
830 reg = <0x02100000 0x100000>;
831 ranges;
832
833 usbotg1: usb@02184000 {
834 compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
835 reg = <0x02184000 0x200>;
836 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
837 clocks = <&clks IMX6UL_CLK_USBOH3>;
838 fsl,usbphy = <&usbphy1>;
839 fsl,usbmisc = <&usbmisc 0>;
840 fsl,anatop = <&anatop>;
841 ahb-burst-config = <0x0>;
842 tx-burst-size-dword = <0x10>;
843 rx-burst-size-dword = <0x10>;
844 status = "disabled";
845 };
846
847 usbotg2: usb@02184200 {
848 compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
849 reg = <0x02184200 0x200>;
850 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
851 clocks = <&clks IMX6UL_CLK_USBOH3>;
852 fsl,usbphy = <&usbphy2>;
853 fsl,usbmisc = <&usbmisc 1>;
854 ahb-burst-config = <0x0>;
855 tx-burst-size-dword = <0x10>;
856 rx-burst-size-dword = <0x10>;
857 status = "disabled";
858 };
859
860 usbmisc: usbmisc@02184800 {
861 #index-cells = <1>;
862 compatible = "fsl,imx6ul-usbmisc", "fsl,imx6q-usbmisc";
863 reg = <0x02184800 0x200>;
864 };
865
866 fec1: ethernet@02188000 {
867 compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
868 reg = <0x02188000 0x4000>;
869 interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
870 <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
871 clocks = <&clks IMX6UL_CLK_ENET>,
872 <&clks IMX6UL_CLK_ENET_AHB>,
873 <&clks IMX6UL_CLK_ENET_PTP>,
874 <&clks IMX6UL_CLK_ENET_REF>,
875 <&clks IMX6UL_CLK_ENET_REF>;
876 clock-names = "ipg", "ahb", "ptp",
877 "enet_clk_ref", "enet_out";
878 stop-mode = <&gpr 0x10 3>;
879 fsl,num-tx-queues=<1>;
880 fsl,num-rx-queues=<1>;
881 fsl,magic-packet;
882 fsl,wakeup_irq = <0>;
883 status = "disabled";
884 };
885
886 usdhc1: usdhc@02190000 {
887 compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
888 reg = <0x02190000 0x4000>;
889 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
890 clocks = <&clks IMX6UL_CLK_USDHC1>,
891 <&clks IMX6UL_CLK_USDHC1>,
892 <&clks IMX6UL_CLK_USDHC1>;
893 clock-names = "ipg", "ahb", "per";
894 bus-width = <4>;
895 fsl,tuning-step= <2>;
896 status = "disabled";
897 };
898
899 usdhc2: usdhc@02194000 {
900 compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
901 reg = <0x02194000 0x4000>;
902 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
903 clocks = <&clks IMX6UL_CLK_USDHC2>,
904 <&clks IMX6UL_CLK_USDHC2>,
905 <&clks IMX6UL_CLK_USDHC2>;
906 clock-names = "ipg", "ahb", "per";
907 bus-width = <4>;
908 fsl,tuning-step= <2>;
909 status = "disabled";
910 };
911
912 adc1: adc@02198000 {
913 compatible = "fsl,imx6ul-adc", "fsl,vf610-adc";
914 reg = <0x02198000 0x4000>;
915 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
916 clocks = <&clks IMX6UL_CLK_ADC1>;
917 num-channels = <2>;
918 clock-names = "adc";
919 status = "disabled";
920 };
921
922 i2c1: i2c@021a0000 {
923 #address-cells = <1>;
924 #size-cells = <0>;
925 compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
926 reg = <0x021a0000 0x4000>;
927 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
928 clocks = <&clks IMX6UL_CLK_I2C1>;
929 status = "disabled";
930 };
931
932 i2c2: i2c@021a4000 {
933 #address-cells = <1>;
934 #size-cells = <0>;
935 compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
936 reg = <0x021a4000 0x4000>;
937 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
938 clocks = <&clks IMX6UL_CLK_I2C2>;
939 status = "disabled";
940 };
941
942 i2c3: i2c@021a8000 {
943 #address-cells = <1>;
944 #size-cells = <0>;
945 compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
946 reg = <0x021a8000 0x4000>;
947 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
948 clocks = <&clks IMX6UL_CLK_I2C3>;
949 status = "disabled";
950 };
951
952 romcp@021ac000 {
953 compatible = "fsl,imx6ul-romcp", "syscon";
954 reg = <0x021ac000 0x4000>;
955 };
956
957 mmdc: mmdc@021b0000 {
958 compatible = "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc";
959 reg = <0x021b0000 0x4000>;
960 };
961
962 weim: weim@021b8000 {
963 compatible = "fsl,imx6ul-weim", "fsl,imx6q-weim";
964 reg = <0x021b8000 0x4000>;
965 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
966 clocks = <&clks IMX6UL_CLK_DUMMY>;
967 };
968
969 ocotp: ocotp-ctrl@021bc000 {
970 compatible = "fsl,imx6ull-ocotp", "syscon";
971 reg = <0x021bc000 0x4000>;
972 clocks = <&clks IMX6UL_CLK_OCOTP>;
973 };
974
975 csu: csu@021c0000 {
976 compatible = "fsl,imx6ul-csu";
977 reg = <0x021c0000 0x4000>;
978 interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
979 status = "disabled";
980 };
981
982 csi: csi@021c4000 {
983 compatible = "fsl,imx6ul-csi", "fsl,imx6s-csi";
984 reg = <0x021c4000 0x4000>;
985 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
986 clocks = <&clks IMX6UL_CLK_DUMMY>,
987 <&clks IMX6UL_CLK_CSI>,
988 <&clks IMX6UL_CLK_DUMMY>;
989 clock-names = "disp-axi", "csi_mclk", "disp_dcic";
990 status = "disabled";
991 };
992
993 lcdif: lcdif@021c8000 {
994 compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif";
995 reg = <0x021c8000 0x4000>;
996 interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
997 clocks = <&clks IMX6UL_CLK_LCDIF_PIX>,
998 <&clks IMX6UL_CLK_LCDIF_APB>,
999 <&clks IMX6UL_CLK_DUMMY>;
1000 clock-names = "pix", "axi", "disp_axi";
1001 status = "disabled";
1002 };
1003
1004 pxp: pxp@021cc000 {
1005 compatible = "fsl,imx6ull-pxp-dma", "fsl,imx7d-pxp-dma";
1006 reg = <0x021cc000 0x4000>;
1007 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
1008 <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
1009 clocks = <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_PXP>;
1010 clock-names = "pxp_ipg", "pxp_axi";
1011 status = "disabled";
1012 };
1013
1014 qspi: qspi@021e0000 {
1015 #address-cells = <1>;
1016 #size-cells = <0>;
1017 compatible = "fsl,imx6ull-qspi", "fsl,imx6ul-qspi";
1018 reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
1019 reg-names = "QuadSPI", "QuadSPI-memory";
1020 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
1021 clocks = <&clks IMX6UL_CLK_QSPI>,
1022 <&clks IMX6UL_CLK_QSPI>;
1023 clock-names = "qspi_en", "qspi";
1024 status = "disabled";
1025 };
1026
1027 uart2: serial@021e8000 {
1028 compatible = "fsl,imx6ul-uart",
1029 "fsl,imx6q-uart", "fsl,imx21-uart";
1030 reg = <0x021e8000 0x4000>;
1031 interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
1032 clocks = <&clks IMX6UL_CLK_UART2_IPG>,
1033 <&clks IMX6UL_CLK_UART2_SERIAL>;
1034 clock-names = "ipg", "per";
1035 dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
1036 dma-names = "rx", "tx";
1037 status = "disabled";
1038 };
1039
1040 uart3: serial@021ec000 {
1041 compatible = "fsl,imx6ul-uart",
1042 "fsl,imx6q-uart", "fsl,imx21-uart";
1043 reg = <0x021ec000 0x4000>;
1044 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
1045 clocks = <&clks IMX6UL_CLK_UART3_IPG>,
1046 <&clks IMX6UL_CLK_UART3_SERIAL>;
1047 clock-names = "ipg", "per";
1048 dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
1049 dma-names = "rx", "tx";
1050 status = "disabled";
1051 };
1052
1053 uart4: serial@021f0000 {
1054 compatible = "fsl,imx6ul-uart",
1055 "fsl,imx6q-uart", "fsl,imx21-uart";
1056 reg = <0x021f0000 0x4000>;
1057 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
1058 clocks = <&clks IMX6UL_CLK_UART4_IPG>,
1059 <&clks IMX6UL_CLK_UART4_SERIAL>;
1060 clock-names = "ipg", "per";
1061 dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
1062 dma-names = "rx", "tx";
1063 status = "disabled";
1064 };
1065
1066 uart5: serial@021f4000 {
1067 compatible = "fsl,imx6ul-uart",
1068 "fsl,imx6q-uart", "fsl,imx21-uart";
1069 reg = <0x021f4000 0x4000>;
1070 interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
1071 clocks = <&clks IMX6UL_CLK_UART5_IPG>,
1072 <&clks IMX6UL_CLK_UART5_SERIAL>;
1073 clock-names = "ipg", "per";
1074 dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
1075 dma-names = "rx", "tx";
1076 status = "disabled";
1077 };
1078
1079 i2c4: i2c@021f8000 {
1080 #address-cells = <1>;
1081 #size-cells = <0>;
1082 compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
1083 reg = <0x021f8000 0x4000>;
1084 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
1085 clocks = <&clks IMX6UL_CLK_I2C4>;
1086 status = "disabled";
1087 };
1088
1089 uart6: serial@021fc000 {
1090 compatible = "fsl,imx6ul-uart",
1091 "fsl,imx6q-uart", "fsl,imx21-uart";
1092 reg = <0x021fc000 0x4000>;
1093 interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
1094 clocks = <&clks IMX6UL_CLK_UART6_IPG>,
1095 <&clks IMX6UL_CLK_UART6_SERIAL>;
1096 clock-names = "ipg", "per";
1097 dmas = <&sdma 0 4 0>, <&sdma 47 4 0>;
1098 dma-names = "rx", "tx";
1099 status = "disabled";
1100 };
1101 };
1102
1103 aips3: aips-bus@02200000 {
1104 compatible = "fsl,aips-bus", "simple-bus";
1105 #address-cells = <1>;
1106 #size-cells = <1>;
1107 reg = <0x02200000 0x100000>;
1108 ranges;
1109
1110 dcp: dcp@02280000 {
1111 reg = <0x02280000 0x4000>;
1112 interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
1113 <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
1114 <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
1115 /*clocks = <&clks IMX6UL_CLK_DCP>;*/
1116 clock-names = "dcp";
1117 status = "disabled";
1118 };
1119
1120 rngb: rngb@02284000 {
1121 reg = <0x02284000 0x4000>;
1122 interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
1123 };
1124
1125 uart8: serial@02288000 {
1126 compatible = "fsl,imx6ul-uart",
1127 "fsl,imx6q-uart", "fsl,imx21-uart";
1128 reg = <0x02288000 0x4000>;
1129 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
1130 clocks = <&clks IMX6UL_CLK_UART8_IPG>,
1131 <&clks IMX6UL_CLK_UART8_SERIAL>;
1132 clock-names = "ipg", "per";
1133 dmas = <&sdma 45 4 0>, <&sdma 46 4 0>;
1134 dma-names = "rx", "tx";
1135 status = "disabled";
1136 };
1137
1138 epdc: epdc@0228c000 {
1139 compatible = "fsl,imx7d-epdc";
1140 interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
1141 reg = <0x0228c000 0x4000>;
1142 clocks = <&clks IMX6UL_CLK_EPDC_ACLK>,
1143 <&clks IMX6UL_CLK_EPDC_PIX>;
1144 clock-names = "epdc_axi", "epdc_pix";
1145 /* Need to fix epdc-ram */
1146 /* epdc-ram = <&gpr 0x4 30>; */
1147 status = "disabled";
1148 };
1149
1150 iomuxc_snvs: iomuxc-snvs@02290000 {
1151 compatible = "fsl,imx6ull-iomuxc-snvs";
1152 reg = <0x02290000 0x10000>;
1153 };
1154
1155 snvs_gpr: snvs-gpr@0x02294000 {
1156 compatible = "fsl, imx6ull-snvs-gpr";
1157 reg = <0x02294000 0x10000>;
1158 };
1159 };
1160 };
1161};