Jernej Skrabec | 80b2c65 | 2021-01-11 21:11:50 +0100 | [diff] [blame] | 1 | // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 | // Copyright (C) 2020 Arm Ltd. |
| 3 | // based on the H6 dtsi, which is: |
| 4 | // Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io> |
| 5 | |
| 6 | #include <dt-bindings/interrupt-controller/arm-gic.h> |
| 7 | #include <dt-bindings/clock/sun50i-h616-ccu.h> |
| 8 | #include <dt-bindings/clock/sun50i-h6-r-ccu.h> |
| 9 | #include <dt-bindings/reset/sun50i-h616-ccu.h> |
| 10 | #include <dt-bindings/reset/sun50i-h6-r-ccu.h> |
| 11 | |
| 12 | / { |
| 13 | interrupt-parent = <&gic>; |
| 14 | #address-cells = <2>; |
| 15 | #size-cells = <2>; |
| 16 | |
| 17 | cpus { |
| 18 | #address-cells = <1>; |
| 19 | #size-cells = <0>; |
| 20 | |
| 21 | cpu0: cpu@0 { |
| 22 | compatible = "arm,cortex-a53"; |
| 23 | device_type = "cpu"; |
| 24 | reg = <0>; |
| 25 | enable-method = "psci"; |
| 26 | clocks = <&ccu CLK_CPUX>; |
| 27 | }; |
| 28 | |
| 29 | cpu1: cpu@1 { |
| 30 | compatible = "arm,cortex-a53"; |
| 31 | device_type = "cpu"; |
| 32 | reg = <1>; |
| 33 | enable-method = "psci"; |
| 34 | clocks = <&ccu CLK_CPUX>; |
| 35 | }; |
| 36 | |
| 37 | cpu2: cpu@2 { |
| 38 | compatible = "arm,cortex-a53"; |
| 39 | device_type = "cpu"; |
| 40 | reg = <2>; |
| 41 | enable-method = "psci"; |
| 42 | clocks = <&ccu CLK_CPUX>; |
| 43 | }; |
| 44 | |
| 45 | cpu3: cpu@3 { |
| 46 | compatible = "arm,cortex-a53"; |
| 47 | device_type = "cpu"; |
| 48 | reg = <3>; |
| 49 | enable-method = "psci"; |
| 50 | clocks = <&ccu CLK_CPUX>; |
| 51 | }; |
| 52 | }; |
| 53 | |
Jernej Skrabec | 80b2c65 | 2021-01-11 21:11:50 +0100 | [diff] [blame] | 54 | osc24M: osc24M_clk { |
| 55 | #clock-cells = <0>; |
| 56 | compatible = "fixed-clock"; |
| 57 | clock-frequency = <24000000>; |
| 58 | clock-output-names = "osc24M"; |
| 59 | }; |
| 60 | |
| 61 | pmu { |
| 62 | compatible = "arm,cortex-a53-pmu"; |
| 63 | interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, |
| 64 | <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, |
| 65 | <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, |
| 66 | <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; |
| 67 | interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; |
| 68 | }; |
| 69 | |
| 70 | psci { |
| 71 | compatible = "arm,psci-0.2"; |
| 72 | method = "smc"; |
| 73 | }; |
| 74 | |
| 75 | timer { |
| 76 | compatible = "arm,armv8-timer"; |
| 77 | arm,no-tick-in-suspend; |
| 78 | interrupts = <GIC_PPI 13 |
| 79 | (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, |
| 80 | <GIC_PPI 14 |
| 81 | (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, |
| 82 | <GIC_PPI 11 |
| 83 | (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, |
| 84 | <GIC_PPI 10 |
| 85 | (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; |
| 86 | }; |
| 87 | |
| 88 | soc { |
| 89 | compatible = "simple-bus"; |
| 90 | #address-cells = <1>; |
| 91 | #size-cells = <1>; |
| 92 | ranges = <0x0 0x0 0x0 0x40000000>; |
| 93 | |
| 94 | syscon: syscon@3000000 { |
| 95 | compatible = "allwinner,sun50i-h616-system-control"; |
| 96 | reg = <0x03000000 0x1000>; |
| 97 | #address-cells = <1>; |
| 98 | #size-cells = <1>; |
| 99 | ranges; |
| 100 | |
| 101 | sram_c: sram@28000 { |
| 102 | compatible = "mmio-sram"; |
| 103 | reg = <0x00028000 0x30000>; |
| 104 | #address-cells = <1>; |
| 105 | #size-cells = <1>; |
| 106 | ranges = <0 0x00028000 0x30000>; |
| 107 | }; |
| 108 | }; |
| 109 | |
| 110 | ccu: clock@3001000 { |
| 111 | compatible = "allwinner,sun50i-h616-ccu"; |
| 112 | reg = <0x03001000 0x1000>; |
| 113 | clocks = <&osc24M>, <&rtc 0>, <&rtc 2>; |
| 114 | clock-names = "hosc", "losc", "iosc"; |
| 115 | #clock-cells = <1>; |
| 116 | #reset-cells = <1>; |
| 117 | }; |
| 118 | |
| 119 | watchdog: watchdog@30090a0 { |
| 120 | compatible = "allwinner,sun50i-h616-wdt", |
| 121 | "allwinner,sun6i-a31-wdt"; |
| 122 | reg = <0x030090a0 0x20>; |
| 123 | interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; |
| 124 | clocks = <&osc24M>; |
| 125 | status = "disabled"; |
| 126 | }; |
| 127 | |
| 128 | pio: pinctrl@300b000 { |
| 129 | compatible = "allwinner,sun50i-h616-pinctrl"; |
| 130 | reg = <0x0300b000 0x400>; |
| 131 | interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, |
| 132 | <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, |
| 133 | <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, |
| 134 | <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, |
| 135 | <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, |
| 136 | <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, |
| 137 | <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, |
| 138 | <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; |
| 139 | clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc 0>; |
| 140 | clock-names = "apb", "hosc", "losc"; |
| 141 | gpio-controller; |
| 142 | #gpio-cells = <3>; |
| 143 | interrupt-controller; |
| 144 | #interrupt-cells = <3>; |
| 145 | |
| 146 | ext_rgmii_pins: rgmii-pins { |
| 147 | pins = "PI0", "PI1", "PI2", "PI3", "PI4", |
| 148 | "PI5", "PI7", "PI8", "PI9", "PI10", |
| 149 | "PI11", "PI12", "PI13", "PI14", "PI15", |
| 150 | "PI16"; |
| 151 | function = "emac0"; |
| 152 | drive-strength = <40>; |
| 153 | }; |
| 154 | |
| 155 | i2c0_pins: i2c0-pins { |
| 156 | pins = "PI6", "PI7"; |
| 157 | function = "i2c0"; |
| 158 | }; |
| 159 | |
| 160 | i2c3_ph_pins: i2c3-ph-pins { |
| 161 | pins = "PH4", "PH5"; |
| 162 | function = "i2c3"; |
| 163 | }; |
| 164 | |
| 165 | ir_rx_pin: ir_rx_pin { |
| 166 | pins = "PH10"; |
| 167 | function = "ir_rx"; |
| 168 | }; |
| 169 | |
| 170 | mmc0_pins: mmc0-pins { |
| 171 | pins = "PF0", "PF1", "PF2", "PF3", |
| 172 | "PF4", "PF5"; |
| 173 | function = "mmc0"; |
| 174 | drive-strength = <30>; |
| 175 | bias-pull-up; |
| 176 | }; |
| 177 | |
| 178 | mmc1_pins: mmc1-pins { |
| 179 | pins = "PG0", "PG1", "PG2", "PG3", |
| 180 | "PG4", "PG5"; |
| 181 | function = "mmc1"; |
| 182 | drive-strength = <30>; |
| 183 | bias-pull-up; |
| 184 | }; |
| 185 | |
| 186 | mmc2_pins: mmc2-pins { |
| 187 | pins = "PC0", "PC1", "PC5", "PC6", |
| 188 | "PC8", "PC9", "PC10", "PC11", |
| 189 | "PC13", "PC14", "PC15", "PC16"; |
| 190 | function = "mmc2"; |
| 191 | drive-strength = <30>; |
| 192 | bias-pull-up; |
| 193 | }; |
| 194 | |
| 195 | spi0_pins: spi0-pins { |
| 196 | pins = "PC0", "PC2", "PC3", "PC4"; |
| 197 | function = "spi0"; |
| 198 | }; |
| 199 | |
| 200 | spi1_pins: spi1-pins { |
| 201 | pins = "PH6", "PH7", "PH8"; |
| 202 | function = "spi1"; |
| 203 | }; |
| 204 | |
| 205 | spi1_cs_pin: spi1-cs-pin { |
| 206 | pins = "PH5"; |
| 207 | function = "spi1"; |
| 208 | }; |
| 209 | |
| 210 | uart0_ph_pins: uart0-ph-pins { |
| 211 | pins = "PH0", "PH1"; |
| 212 | function = "uart0"; |
| 213 | }; |
| 214 | |
| 215 | uart1_pins: uart1-pins { |
| 216 | pins = "PG6", "PG7"; |
| 217 | function = "uart1"; |
| 218 | }; |
| 219 | |
| 220 | uart1_rts_cts_pins: uart1-rts-cts-pins { |
| 221 | pins = "PG8", "PG9"; |
| 222 | function = "uart1"; |
| 223 | }; |
| 224 | }; |
| 225 | |
| 226 | gic: interrupt-controller@3021000 { |
| 227 | compatible = "arm,gic-400"; |
| 228 | reg = <0x03021000 0x1000>, |
| 229 | <0x03022000 0x2000>, |
| 230 | <0x03024000 0x2000>, |
| 231 | <0x03026000 0x2000>; |
| 232 | interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; |
| 233 | interrupt-controller; |
| 234 | #interrupt-cells = <3>; |
| 235 | }; |
| 236 | |
| 237 | mmc0: mmc@4020000 { |
| 238 | compatible = "allwinner,sun50i-h616-mmc", |
| 239 | "allwinner,sun50i-a100-mmc"; |
| 240 | reg = <0x04020000 0x1000>; |
| 241 | clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>; |
| 242 | clock-names = "ahb", "mmc"; |
| 243 | resets = <&ccu RST_BUS_MMC0>; |
| 244 | reset-names = "ahb"; |
| 245 | interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; |
| 246 | pinctrl-names = "default"; |
| 247 | pinctrl-0 = <&mmc0_pins>; |
| 248 | status = "disabled"; |
| 249 | cap-sd-highspeed; |
| 250 | cap-mmc-highspeed; |
| 251 | mmc-ddr-3_3v; |
| 252 | mmc-ddr-1_8v; |
| 253 | cap-sdio-irq; |
| 254 | #address-cells = <1>; |
| 255 | #size-cells = <0>; |
| 256 | }; |
| 257 | |
| 258 | mmc1: mmc@4021000 { |
| 259 | compatible = "allwinner,sun50i-h616-mmc", |
| 260 | "allwinner,sun50i-a100-mmc"; |
| 261 | reg = <0x04021000 0x1000>; |
| 262 | clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>; |
| 263 | clock-names = "ahb", "mmc"; |
| 264 | resets = <&ccu RST_BUS_MMC1>; |
| 265 | reset-names = "ahb"; |
| 266 | interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; |
| 267 | pinctrl-names = "default"; |
| 268 | pinctrl-0 = <&mmc1_pins>; |
| 269 | status = "disabled"; |
| 270 | cap-sd-highspeed; |
| 271 | cap-mmc-highspeed; |
| 272 | mmc-ddr-3_3v; |
| 273 | mmc-ddr-1_8v; |
| 274 | cap-sdio-irq; |
| 275 | #address-cells = <1>; |
| 276 | #size-cells = <0>; |
| 277 | }; |
| 278 | |
| 279 | mmc2: mmc@4022000 { |
| 280 | compatible = "allwinner,sun50i-h616-emmc", |
| 281 | "allwinner,sun50i-a100-emmc"; |
| 282 | reg = <0x04022000 0x1000>; |
| 283 | clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>; |
| 284 | clock-names = "ahb", "mmc"; |
| 285 | resets = <&ccu RST_BUS_MMC2>; |
| 286 | reset-names = "ahb"; |
| 287 | interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; |
| 288 | pinctrl-names = "default"; |
| 289 | pinctrl-0 = <&mmc2_pins>; |
| 290 | status = "disabled"; |
| 291 | cap-sd-highspeed; |
| 292 | cap-mmc-highspeed; |
| 293 | mmc-ddr-3_3v; |
| 294 | mmc-ddr-1_8v; |
| 295 | cap-sdio-irq; |
| 296 | #address-cells = <1>; |
| 297 | #size-cells = <0>; |
| 298 | }; |
| 299 | |
| 300 | uart0: serial@5000000 { |
| 301 | compatible = "snps,dw-apb-uart"; |
| 302 | reg = <0x05000000 0x400>; |
| 303 | interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; |
| 304 | reg-shift = <2>; |
| 305 | reg-io-width = <4>; |
| 306 | clocks = <&ccu CLK_BUS_UART0>; |
| 307 | resets = <&ccu RST_BUS_UART0>; |
| 308 | status = "disabled"; |
| 309 | }; |
| 310 | |
| 311 | uart1: serial@5000400 { |
| 312 | compatible = "snps,dw-apb-uart"; |
| 313 | reg = <0x05000400 0x400>; |
| 314 | interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; |
| 315 | reg-shift = <2>; |
| 316 | reg-io-width = <4>; |
| 317 | clocks = <&ccu CLK_BUS_UART1>; |
| 318 | resets = <&ccu RST_BUS_UART1>; |
| 319 | status = "disabled"; |
| 320 | }; |
| 321 | |
| 322 | uart2: serial@5000800 { |
| 323 | compatible = "snps,dw-apb-uart"; |
| 324 | reg = <0x05000800 0x400>; |
| 325 | interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; |
| 326 | reg-shift = <2>; |
| 327 | reg-io-width = <4>; |
| 328 | clocks = <&ccu CLK_BUS_UART2>; |
| 329 | resets = <&ccu RST_BUS_UART2>; |
| 330 | status = "disabled"; |
| 331 | }; |
| 332 | |
| 333 | uart3: serial@5000c00 { |
| 334 | compatible = "snps,dw-apb-uart"; |
| 335 | reg = <0x05000c00 0x400>; |
| 336 | interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; |
| 337 | reg-shift = <2>; |
| 338 | reg-io-width = <4>; |
| 339 | clocks = <&ccu CLK_BUS_UART3>; |
| 340 | resets = <&ccu RST_BUS_UART3>; |
| 341 | status = "disabled"; |
| 342 | }; |
| 343 | |
| 344 | uart4: serial@5001000 { |
| 345 | compatible = "snps,dw-apb-uart"; |
| 346 | reg = <0x05001000 0x400>; |
| 347 | interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; |
| 348 | reg-shift = <2>; |
| 349 | reg-io-width = <4>; |
| 350 | clocks = <&ccu CLK_BUS_UART4>; |
| 351 | resets = <&ccu RST_BUS_UART4>; |
| 352 | status = "disabled"; |
| 353 | }; |
| 354 | |
| 355 | uart5: serial@5001400 { |
| 356 | compatible = "snps,dw-apb-uart"; |
| 357 | reg = <0x05001400 0x400>; |
| 358 | interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; |
| 359 | reg-shift = <2>; |
| 360 | reg-io-width = <4>; |
| 361 | clocks = <&ccu CLK_BUS_UART5>; |
| 362 | resets = <&ccu RST_BUS_UART5>; |
| 363 | status = "disabled"; |
| 364 | }; |
| 365 | |
| 366 | i2c0: i2c@5002000 { |
| 367 | compatible = "allwinner,sun50i-h616-i2c", |
| 368 | "allwinner,sun6i-a31-i2c"; |
| 369 | reg = <0x05002000 0x400>; |
| 370 | interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; |
| 371 | clocks = <&ccu CLK_BUS_I2C0>; |
| 372 | resets = <&ccu RST_BUS_I2C0>; |
| 373 | pinctrl-names = "default"; |
| 374 | pinctrl-0 = <&i2c0_pins>; |
| 375 | status = "disabled"; |
| 376 | #address-cells = <1>; |
| 377 | #size-cells = <0>; |
| 378 | }; |
| 379 | |
| 380 | i2c1: i2c@5002400 { |
| 381 | compatible = "allwinner,sun50i-h616-i2c", |
| 382 | "allwinner,sun6i-a31-i2c"; |
| 383 | reg = <0x05002400 0x400>; |
| 384 | interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| 385 | clocks = <&ccu CLK_BUS_I2C1>; |
| 386 | resets = <&ccu RST_BUS_I2C1>; |
| 387 | status = "disabled"; |
| 388 | #address-cells = <1>; |
| 389 | #size-cells = <0>; |
| 390 | }; |
| 391 | |
| 392 | i2c2: i2c@5002800 { |
| 393 | compatible = "allwinner,sun50i-h616-i2c", |
| 394 | "allwinner,sun6i-a31-i2c"; |
| 395 | reg = <0x05002800 0x400>; |
| 396 | interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; |
| 397 | clocks = <&ccu CLK_BUS_I2C2>; |
| 398 | resets = <&ccu RST_BUS_I2C2>; |
| 399 | status = "disabled"; |
| 400 | #address-cells = <1>; |
| 401 | #size-cells = <0>; |
| 402 | }; |
| 403 | |
| 404 | i2c3: i2c@5002c00 { |
| 405 | compatible = "allwinner,sun50i-h616-i2c", |
| 406 | "allwinner,sun6i-a31-i2c"; |
| 407 | reg = <0x05002c00 0x400>; |
| 408 | interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| 409 | clocks = <&ccu CLK_BUS_I2C3>; |
| 410 | resets = <&ccu RST_BUS_I2C3>; |
| 411 | status = "disabled"; |
| 412 | #address-cells = <1>; |
| 413 | #size-cells = <0>; |
| 414 | }; |
| 415 | |
| 416 | i2c4: i2c@5003000 { |
| 417 | compatible = "allwinner,sun50i-h616-i2c", |
| 418 | "allwinner,sun6i-a31-i2c"; |
| 419 | reg = <0x05003000 0x400>; |
| 420 | interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| 421 | clocks = <&ccu CLK_BUS_I2C4>; |
| 422 | resets = <&ccu RST_BUS_I2C4>; |
| 423 | status = "disabled"; |
| 424 | #address-cells = <1>; |
| 425 | #size-cells = <0>; |
| 426 | }; |
| 427 | |
| 428 | spi0: spi@5010000 { |
| 429 | compatible = "allwinner,sun50i-h616-spi", |
| 430 | "allwinner,sun8i-h3-spi"; |
| 431 | reg = <0x05010000 0x1000>; |
| 432 | interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| 433 | clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>; |
| 434 | clock-names = "ahb", "mod"; |
| 435 | resets = <&ccu RST_BUS_SPI0>; |
| 436 | pinctrl-names = "default"; |
| 437 | pinctrl-0 = <&spi0_pins>; |
| 438 | status = "disabled"; |
| 439 | #address-cells = <1>; |
| 440 | #size-cells = <0>; |
| 441 | }; |
| 442 | |
| 443 | spi1: spi@5011000 { |
| 444 | compatible = "allwinner,sun50i-h616-spi", |
| 445 | "allwinner,sun8i-h3-spi"; |
| 446 | reg = <0x05011000 0x1000>; |
| 447 | interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
| 448 | clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>; |
| 449 | clock-names = "ahb", "mod"; |
| 450 | resets = <&ccu RST_BUS_SPI1>; |
| 451 | pinctrl-names = "default"; |
| 452 | pinctrl-0 = <&spi1_pins>; |
| 453 | status = "disabled"; |
| 454 | #address-cells = <1>; |
| 455 | #size-cells = <0>; |
| 456 | }; |
| 457 | |
| 458 | emac0: ethernet@5020000 { |
| 459 | compatible = "allwinner,sun50i-h616-emac", |
| 460 | "allwinner,sun50i-a64-emac"; |
| 461 | syscon = <&syscon>; |
| 462 | reg = <0x05020000 0x10000>; |
| 463 | interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| 464 | interrupt-names = "macirq"; |
| 465 | resets = <&ccu RST_BUS_EMAC0>; |
| 466 | reset-names = "stmmaceth"; |
| 467 | clocks = <&ccu CLK_BUS_EMAC0>; |
| 468 | clock-names = "stmmaceth"; |
| 469 | status = "disabled"; |
| 470 | |
| 471 | mdio0: mdio { |
| 472 | compatible = "snps,dwmac-mdio"; |
| 473 | #address-cells = <1>; |
| 474 | #size-cells = <0>; |
| 475 | }; |
| 476 | }; |
| 477 | |
| 478 | emac1: ethernet@5030000 { |
| 479 | compatible = "allwinner,sun50i-h616-emac"; |
| 480 | syscon = <&syscon 1>; |
| 481 | reg = <0x05030000 0x10000>; |
| 482 | interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; |
| 483 | interrupt-names = "macirq"; |
| 484 | resets = <&ccu RST_BUS_EMAC1>; |
| 485 | reset-names = "stmmaceth"; |
| 486 | clocks = <&ccu CLK_BUS_EMAC1>; |
| 487 | clock-names = "stmmaceth"; |
| 488 | status = "disabled"; |
| 489 | |
| 490 | mdio1: mdio { |
| 491 | compatible = "snps,dwmac-mdio"; |
| 492 | #address-cells = <1>; |
| 493 | #size-cells = <0>; |
| 494 | }; |
| 495 | }; |
| 496 | |
| 497 | usbotg: usb@5100000 { |
| 498 | compatible = "allwinner,sun50i-h616-musb", |
| 499 | "allwinner,sun8i-h3-musb"; |
| 500 | reg = <0x05100000 0x0400>; |
| 501 | clocks = <&ccu CLK_BUS_OTG>; |
| 502 | resets = <&ccu RST_BUS_OTG>; |
| 503 | interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; |
| 504 | interrupt-names = "mc"; |
| 505 | phys = <&usbphy 0>; |
| 506 | phy-names = "usb"; |
| 507 | extcon = <&usbphy 0>; |
| 508 | status = "disabled"; |
| 509 | }; |
| 510 | |
| 511 | usbphy: phy@5100400 { |
| 512 | compatible = "allwinner,sun50i-h616-usb-phy"; |
| 513 | reg = <0x05100400 0x24>, |
| 514 | <0x05101800 0x14>, |
| 515 | <0x05200800 0x14>, |
| 516 | <0x05310800 0x14>, |
| 517 | <0x05311800 0x14>; |
| 518 | reg-names = "phy_ctrl", |
| 519 | "pmu0", |
| 520 | "pmu1", |
| 521 | "pmu2", |
| 522 | "pmu3"; |
| 523 | clocks = <&ccu CLK_USB_PHY0>, |
| 524 | <&ccu CLK_USB_PHY1>, |
| 525 | <&ccu CLK_USB_PHY2>, |
| 526 | <&ccu CLK_USB_PHY3>; |
| 527 | clock-names = "usb0_phy", |
| 528 | "usb1_phy", |
| 529 | "usb2_phy", |
| 530 | "usb3_phy"; |
| 531 | resets = <&ccu RST_USB_PHY0>, |
| 532 | <&ccu RST_USB_PHY1>, |
| 533 | <&ccu RST_USB_PHY2>, |
| 534 | <&ccu RST_USB_PHY3>; |
| 535 | reset-names = "usb0_reset", |
| 536 | "usb1_reset", |
| 537 | "usb2_reset", |
| 538 | "usb3_reset"; |
| 539 | status = "disabled"; |
| 540 | #phy-cells = <1>; |
| 541 | }; |
| 542 | |
| 543 | ehci0: usb@5101000 { |
| 544 | compatible = "allwinner,sun50i-h616-ehci", |
| 545 | "generic-ehci"; |
| 546 | reg = <0x05101000 0x100>; |
| 547 | interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; |
| 548 | clocks = <&ccu CLK_BUS_OHCI0>, |
| 549 | <&ccu CLK_BUS_EHCI0>, |
| 550 | <&ccu CLK_USB_OHCI0>; |
| 551 | resets = <&ccu RST_BUS_OHCI0>, |
| 552 | <&ccu RST_BUS_EHCI0>; |
| 553 | phys = <&usbphy 0>; |
| 554 | phy-names = "usb"; |
| 555 | status = "disabled"; |
| 556 | }; |
| 557 | |
| 558 | ohci0: usb@5101400 { |
| 559 | compatible = "allwinner,sun50i-h616-ohci", |
| 560 | "generic-ohci"; |
| 561 | reg = <0x05101400 0x100>; |
| 562 | interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; |
| 563 | clocks = <&ccu CLK_BUS_OHCI0>, |
| 564 | <&ccu CLK_USB_OHCI0>; |
| 565 | resets = <&ccu RST_BUS_OHCI0>; |
| 566 | phys = <&usbphy 0>; |
| 567 | phy-names = "usb"; |
| 568 | status = "disabled"; |
| 569 | }; |
| 570 | |
| 571 | ehci1: usb@5200000 { |
| 572 | compatible = "allwinner,sun50i-h616-ehci", |
| 573 | "generic-ehci"; |
| 574 | reg = <0x05200000 0x100>; |
| 575 | interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; |
| 576 | clocks = <&ccu CLK_BUS_OHCI1>, |
| 577 | <&ccu CLK_BUS_EHCI1>, |
| 578 | <&ccu CLK_USB_OHCI1>; |
| 579 | resets = <&ccu RST_BUS_OHCI1>, |
| 580 | <&ccu RST_BUS_EHCI1>; |
| 581 | phys = <&usbphy 1>; |
| 582 | phy-names = "usb"; |
| 583 | status = "disabled"; |
| 584 | }; |
| 585 | |
| 586 | ohci1: usb@5200400 { |
| 587 | compatible = "allwinner,sun50i-h616-ohci", |
| 588 | "generic-ohci"; |
| 589 | reg = <0x05200400 0x100>; |
| 590 | interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; |
| 591 | clocks = <&ccu CLK_BUS_OHCI1>, |
| 592 | <&ccu CLK_USB_OHCI1>; |
| 593 | resets = <&ccu RST_BUS_OHCI1>; |
| 594 | phys = <&usbphy 1>; |
| 595 | phy-names = "usb"; |
| 596 | status = "disabled"; |
| 597 | }; |
| 598 | |
| 599 | ehci2: usb@5310000 { |
| 600 | compatible = "allwinner,sun50i-h616-ehci", |
| 601 | "generic-ehci"; |
| 602 | reg = <0x05310000 0x100>; |
| 603 | interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; |
| 604 | clocks = <&ccu CLK_BUS_OHCI2>, |
| 605 | <&ccu CLK_BUS_EHCI2>, |
| 606 | <&ccu CLK_USB_OHCI2>; |
| 607 | resets = <&ccu RST_BUS_OHCI2>, |
| 608 | <&ccu RST_BUS_EHCI2>; |
| 609 | phys = <&usbphy 2>; |
| 610 | phy-names = "usb"; |
| 611 | status = "disabled"; |
| 612 | }; |
| 613 | |
| 614 | ohci2: usb@5310400 { |
| 615 | compatible = "allwinner,sun50i-h616-ohci", |
| 616 | "generic-ohci"; |
| 617 | reg = <0x05310400 0x100>; |
| 618 | interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; |
| 619 | clocks = <&ccu CLK_BUS_OHCI2>, |
| 620 | <&ccu CLK_USB_OHCI2>; |
| 621 | resets = <&ccu RST_BUS_OHCI2>; |
| 622 | phys = <&usbphy 2>; |
| 623 | phy-names = "usb"; |
| 624 | status = "disabled"; |
| 625 | }; |
| 626 | |
| 627 | ehci3: usb@5311000 { |
| 628 | compatible = "allwinner,sun50i-h616-ehci", |
| 629 | "generic-ehci"; |
| 630 | reg = <0x05311000 0x100>; |
| 631 | interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; |
| 632 | clocks = <&ccu CLK_BUS_OHCI3>, |
| 633 | <&ccu CLK_BUS_EHCI3>, |
| 634 | <&ccu CLK_USB_OHCI3>; |
| 635 | resets = <&ccu RST_BUS_OHCI3>, |
| 636 | <&ccu RST_BUS_EHCI3>; |
| 637 | phys = <&usbphy 3>; |
| 638 | phy-names = "usb"; |
| 639 | status = "disabled"; |
| 640 | }; |
| 641 | |
| 642 | ohci3: usb@5311400 { |
| 643 | compatible = "allwinner,sun50i-h616-ohci", |
| 644 | "generic-ohci"; |
| 645 | reg = <0x05311400 0x100>; |
| 646 | interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; |
| 647 | clocks = <&ccu CLK_BUS_OHCI3>, |
| 648 | <&ccu CLK_USB_OHCI3>; |
| 649 | resets = <&ccu RST_BUS_OHCI3>; |
| 650 | phys = <&usbphy 3>; |
| 651 | phy-names = "usb"; |
| 652 | status = "disabled"; |
| 653 | }; |
| 654 | |
| 655 | rtc: rtc@7000000 { |
| 656 | compatible = "allwinner,sun50i-h616-rtc", |
| 657 | "allwinner,sun50i-h6-rtc"; |
| 658 | reg = <0x07000000 0x400>; |
| 659 | interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, |
| 660 | <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; |
| 661 | clock-output-names = "osc32k", "osc32k-out", "iosc"; |
| 662 | #clock-cells = <1>; |
| 663 | }; |
| 664 | |
| 665 | r_ccu: clock@7010000 { |
| 666 | compatible = "allwinner,sun50i-h616-r-ccu"; |
| 667 | reg = <0x07010000 0x400>; |
| 668 | clocks = <&osc24M>, <&rtc 0>, <&rtc 2>, |
| 669 | <&ccu CLK_PLL_PERIPH0>; |
| 670 | clock-names = "hosc", "losc", "iosc", "pll-periph"; |
| 671 | #clock-cells = <1>; |
| 672 | #reset-cells = <1>; |
| 673 | }; |
| 674 | |
| 675 | r_pio: pinctrl@7022000 { |
| 676 | compatible = "allwinner,sun50i-h616-r-pinctrl"; |
| 677 | reg = <0x07022000 0x400>; |
| 678 | interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; |
| 679 | clocks = <&r_ccu CLK_R_APB1>, <&osc24M>, <&rtc 0>; |
| 680 | clock-names = "apb", "hosc", "losc"; |
| 681 | gpio-controller; |
| 682 | #gpio-cells = <3>; |
| 683 | interrupt-controller; |
| 684 | #interrupt-cells = <3>; |
| 685 | |
| 686 | r_i2c_pins: r-i2c-pins { |
| 687 | pins = "PL0", "PL1"; |
| 688 | function = "s_i2c"; |
| 689 | }; |
| 690 | |
| 691 | r_rsb_pins: r-rsb-pins { |
| 692 | pins = "PL0", "PL1"; |
| 693 | function = "s_rsb"; |
| 694 | }; |
| 695 | }; |
| 696 | |
| 697 | ir: ir@7040000 { |
| 698 | compatible = "allwinner,sun50i-h616-ir", |
| 699 | "allwinner,sun6i-a31-ir"; |
| 700 | reg = <0x07040000 0x400>; |
| 701 | interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; |
| 702 | clocks = <&r_ccu CLK_R_APB1_IR>, |
| 703 | <&r_ccu CLK_IR>; |
| 704 | clock-names = "apb", "ir"; |
| 705 | resets = <&r_ccu RST_R_APB1_IR>; |
| 706 | pinctrl-names = "default"; |
| 707 | pinctrl-0 = <&ir_rx_pin>; |
| 708 | status = "disabled"; |
| 709 | }; |
| 710 | |
| 711 | r_i2c: i2c@7081400 { |
| 712 | compatible = "allwinner,sun50i-h616-i2c", |
| 713 | "allwinner,sun6i-a31-i2c"; |
| 714 | reg = <0x07081400 0x400>; |
| 715 | interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; |
| 716 | clocks = <&r_ccu CLK_R_APB2_I2C>; |
| 717 | resets = <&r_ccu RST_R_APB2_I2C>; |
| 718 | status = "disabled"; |
| 719 | #address-cells = <1>; |
| 720 | #size-cells = <0>; |
| 721 | }; |
| 722 | |
| 723 | r_rsb: rsb@7083000 { |
| 724 | compatible = "allwinner,sun50i-h616-rsb", |
| 725 | "allwinner,sun8i-a23-rsb"; |
| 726 | reg = <0x07083000 0x400>; |
| 727 | interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; |
| 728 | clocks = <&r_ccu CLK_R_APB2_RSB>; |
| 729 | clock-frequency = <3000000>; |
| 730 | resets = <&r_ccu RST_R_APB2_RSB>; |
| 731 | pinctrl-names = "default"; |
| 732 | pinctrl-0 = <&r_rsb_pins>; |
| 733 | status = "disabled"; |
| 734 | #address-cells = <1>; |
| 735 | #size-cells = <0>; |
| 736 | }; |
| 737 | }; |
| 738 | }; |