blob: c1e1aab2c45ad90483f2aff54e90d1acb9cbd5b5 [file] [log] [blame]
Mike Frysingerd4d77302008-02-04 19:26:55 -05001/* DO NOT EDIT THIS FILE
2 * Automatically generated by generate-def-headers.xsl
3 * DO NOT EDIT THIS FILE
4 */
5
6#ifndef __BFIN_DEF_ADSP_BF527_proc__
7#define __BFIN_DEF_ADSP_BF527_proc__
8
9#include "../mach-common/ADSP-EDN-core_def.h"
10
11#include "ADSP-EDN-BF52x-extended_def.h"
12
13#define PLL_CTL 0xFFC00000 /* PLL Control Register */
14#define PLL_DIV 0xFFC00004 /* PLL Divide Register */
15#define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register */
16#define PLL_STAT 0xFFC0000C /* PLL Status Register */
17#define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count Register */
18#define CHIPID 0xFFC00014
19#define SWRST 0xFFC00100 /* Software Reset Register */
20#define SYSCR 0xFFC00104 /* System Configuration register */
21#define SRAM_BASE_ADDR 0xFFE00000 /* SRAM Base Address (Read Only) */
22#define DMEM_CONTROL 0xFFE00004 /* Data memory control */
23#define DCPLB_STATUS 0xFFE00008 /* Data Cache Programmable Look-Aside Buffer Status */
24#define DCPLB_FAULT_ADDR 0xFFE0000C /* Data Cache Programmable Look-Aside Buffer Fault Address */
25#define DCPLB_ADDR0 0xFFE00100 /* Data Cache Protection Lookaside Buffer 0 */
26#define DCPLB_ADDR1 0xFFE00104 /* Data Cache Protection Lookaside Buffer 1 */
27#define DCPLB_ADDR2 0xFFE00108 /* Data Cache Protection Lookaside Buffer 2 */
28#define DCPLB_ADDR3 0xFFE0010C /* Data Cache Protection Lookaside Buffer 3 */
29#define DCPLB_ADDR4 0xFFE00110 /* Data Cache Protection Lookaside Buffer 4 */
30#define DCPLB_ADDR5 0xFFE00114 /* Data Cache Protection Lookaside Buffer 5 */
31#define DCPLB_ADDR6 0xFFE00118 /* Data Cache Protection Lookaside Buffer 6 */
32#define DCPLB_ADDR7 0xFFE0011C /* Data Cache Protection Lookaside Buffer 7 */
33#define DCPLB_ADDR8 0xFFE00120 /* Data Cache Protection Lookaside Buffer 8 */
34#define DCPLB_ADDR9 0xFFE00124 /* Data Cache Protection Lookaside Buffer 9 */
35#define DCPLB_ADDR10 0xFFE00128 /* Data Cache Protection Lookaside Buffer 10 */
36#define DCPLB_ADDR11 0xFFE0012C /* Data Cache Protection Lookaside Buffer 11 */
37#define DCPLB_ADDR12 0xFFE00130 /* Data Cache Protection Lookaside Buffer 12 */
38#define DCPLB_ADDR13 0xFFE00134 /* Data Cache Protection Lookaside Buffer 13 */
39#define DCPLB_ADDR14 0xFFE00138 /* Data Cache Protection Lookaside Buffer 14 */
40#define DCPLB_ADDR15 0xFFE0013C /* Data Cache Protection Lookaside Buffer 15 */
41#define DCPLB_DATA0 0xFFE00200 /* Data Cache 0 Status */
42#define DCPLB_DATA1 0xFFE00204 /* Data Cache 1 Status */
43#define DCPLB_DATA2 0xFFE00208 /* Data Cache 2 Status */
44#define DCPLB_DATA3 0xFFE0020C /* Data Cache 3 Status */
45#define DCPLB_DATA4 0xFFE00210 /* Data Cache 4 Status */
46#define DCPLB_DATA5 0xFFE00214 /* Data Cache 5 Status */
47#define DCPLB_DATA6 0xFFE00218 /* Data Cache 6 Status */
48#define DCPLB_DATA7 0xFFE0021C /* Data Cache 7 Status */
49#define DCPLB_DATA8 0xFFE00220 /* Data Cache 8 Status */
50#define DCPLB_DATA9 0xFFE00224 /* Data Cache 9 Status */
51#define DCPLB_DATA10 0xFFE00228 /* Data Cache 10 Status */
52#define DCPLB_DATA11 0xFFE0022C /* Data Cache 11 Status */
53#define DCPLB_DATA12 0xFFE00230 /* Data Cache 12 Status */
54#define DCPLB_DATA13 0xFFE00234 /* Data Cache 13 Status */
55#define DCPLB_DATA14 0xFFE00238 /* Data Cache 14 Status */
56#define DCPLB_DATA15 0xFFE0023C /* Data Cache 15 Status */
57#define DTEST_COMMAND 0xFFE00300 /* Data Test Command Register */
58#define DTEST_DATA0 0xFFE00400 /* Data Test Data Register */
59#define DTEST_DATA1 0xFFE00404 /* Data Test Data Register */
60#define IMEM_CONTROL 0xFFE01004 /* Instruction Memory Control */
61#define ICPLB_STATUS 0xFFE01008 /* Instruction Cache Programmable Look-Aside Buffer Status */
62#define ICPLB_FAULT_ADDR 0xFFE0100C /* Instruction Cache Programmable Look-Aside Buffer Fault Address */
63#define ICPLB_ADDR0 0xFFE01100 /* Instruction Cacheability Protection Lookaside Buffer 0 */
64#define ICPLB_ADDR1 0xFFE01104 /* Instruction Cacheability Protection Lookaside Buffer 1 */
65#define ICPLB_ADDR2 0xFFE01108 /* Instruction Cacheability Protection Lookaside Buffer 2 */
66#define ICPLB_ADDR3 0xFFE0110C /* Instruction Cacheability Protection Lookaside Buffer 3 */
67#define ICPLB_ADDR4 0xFFE01110 /* Instruction Cacheability Protection Lookaside Buffer 4 */
68#define ICPLB_ADDR5 0xFFE01114 /* Instruction Cacheability Protection Lookaside Buffer 5 */
69#define ICPLB_ADDR6 0xFFE01118 /* Instruction Cacheability Protection Lookaside Buffer 6 */
70#define ICPLB_ADDR7 0xFFE0111C /* Instruction Cacheability Protection Lookaside Buffer 7 */
71#define ICPLB_ADDR8 0xFFE01120 /* Instruction Cacheability Protection Lookaside Buffer 8 */
72#define ICPLB_ADDR9 0xFFE01124 /* Instruction Cacheability Protection Lookaside Buffer 9 */
73#define ICPLB_ADDR10 0xFFE01128 /* Instruction Cacheability Protection Lookaside Buffer 10 */
74#define ICPLB_ADDR11 0xFFE0112C /* Instruction Cacheability Protection Lookaside Buffer 11 */
75#define ICPLB_ADDR12 0xFFE01130 /* Instruction Cacheability Protection Lookaside Buffer 12 */
76#define ICPLB_ADDR13 0xFFE01134 /* Instruction Cacheability Protection Lookaside Buffer 13 */
77#define ICPLB_ADDR14 0xFFE01138 /* Instruction Cacheability Protection Lookaside Buffer 14 */
78#define ICPLB_ADDR15 0xFFE0113C /* Instruction Cacheability Protection Lookaside Buffer 15 */
79#define ICPLB_DATA0 0xFFE01200 /* Instruction Cache 0 Status */
80#define ICPLB_DATA1 0xFFE01204 /* Instruction Cache 1 Status */
81#define ICPLB_DATA2 0xFFE01208 /* Instruction Cache 2 Status */
82#define ICPLB_DATA3 0xFFE0120C /* Instruction Cache 3 Status */
83#define ICPLB_DATA4 0xFFE01210 /* Instruction Cache 4 Status */
84#define ICPLB_DATA5 0xFFE01214 /* Instruction Cache 5 Status */
85#define ICPLB_DATA6 0xFFE01218 /* Instruction Cache 6 Status */
86#define ICPLB_DATA7 0xFFE0121C /* Instruction Cache 7 Status */
87#define ICPLB_DATA8 0xFFE01220 /* Instruction Cache 8 Status */
88#define ICPLB_DATA9 0xFFE01224 /* Instruction Cache 9 Status */
89#define ICPLB_DATA10 0xFFE01228 /* Instruction Cache 10 Status */
90#define ICPLB_DATA11 0xFFE0122C /* Instruction Cache 11 Status */
91#define ICPLB_DATA12 0xFFE01230 /* Instruction Cache 12 Status */
92#define ICPLB_DATA13 0xFFE01234 /* Instruction Cache 13 Status */
93#define ICPLB_DATA14 0xFFE01238 /* Instruction Cache 14 Status */
94#define ICPLB_DATA15 0xFFE0123C /* Instruction Cache 15 Status */
95#define ITEST_COMMAND 0xFFE01300 /* Instruction Test Command Register */
96#define ITEST_DATA0 0xFFE01400 /* Instruction Test Data Register */
97#define ITEST_DATA1 0xFFE01404 /* Instruction Test Data Register */
98#define EVT0 0xFFE02000 /* Event Vector 0 ESR Address */
99#define EVT1 0xFFE02004 /* Event Vector 1 ESR Address */
100#define EVT2 0xFFE02008 /* Event Vector 2 ESR Address */
101#define EVT3 0xFFE0200C /* Event Vector 3 ESR Address */
102#define EVT4 0xFFE02010 /* Event Vector 4 ESR Address */
103#define EVT5 0xFFE02014 /* Event Vector 5 ESR Address */
104#define EVT6 0xFFE02018 /* Event Vector 6 ESR Address */
105#define EVT7 0xFFE0201C /* Event Vector 7 ESR Address */
106#define EVT8 0xFFE02020 /* Event Vector 8 ESR Address */
107#define EVT9 0xFFE02024 /* Event Vector 9 ESR Address */
108#define EVT10 0xFFE02028 /* Event Vector 10 ESR Address */
109#define EVT11 0xFFE0202C /* Event Vector 11 ESR Address */
110#define EVT12 0xFFE02030 /* Event Vector 12 ESR Address */
111#define EVT13 0xFFE02034 /* Event Vector 13 ESR Address */
112#define EVT14 0xFFE02038 /* Event Vector 14 ESR Address */
113#define EVT15 0xFFE0203C /* Event Vector 15 ESR Address */
114#define ILAT 0xFFE0210C /* Interrupt Latch Register */
115#define IMASK 0xFFE02104 /* Interrupt Mask Register */
116#define IPEND 0xFFE02108 /* Interrupt Pending Register */
117#define IPRIO 0xFFE02110 /* Interrupt Priority Register */
118#define TCNTL 0xFFE03000 /* Core Timer Control Register */
119#define TPERIOD 0xFFE03004 /* Core Timer Period Register */
120#define TSCALE 0xFFE03008 /* Core Timer Scale Register */
121#define TCOUNT 0xFFE0300C /* Core Timer Count Register */
Mike Frysingerd4d77302008-02-04 19:26:55 -0500122#define EMAC_OPMODE 0xFFC03000 /* Operating Mode Register */
123#define EMAC_ADDRLO 0xFFC03004 /* Address Low (32 LSBs) Register */
124#define EMAC_ADDRHI 0xFFC03008 /* Address High (16 MSBs) Register */
125#define EMAC_HASHLO 0xFFC0300C /* Multicast Hash Table Low (Bins 31-0) Register */
126#define EMAC_HASHHI 0xFFC03010 /* Multicast Hash Table High (Bins 63-32) Register */
127#define EMAC_STAADD 0xFFC03014 /* Station Management Address Register */
128#define EMAC_STADAT 0xFFC03018 /* Station Management Data Register */
129#define EMAC_FLC 0xFFC0301C /* Flow Control Register */
130#define EMAC_VLAN1 0xFFC03020 /* VLAN1 Tag Register */
131#define EMAC_VLAN2 0xFFC03024 /* VLAN2 Tag Register */
132#define EMAC_WKUP_CTL 0xFFC0302C /* Wake-Up Control/Status Register */
133#define EMAC_WKUP_FFMSK0 0xFFC03030 /* Wake-Up Frame Filter 0 Byte Mask Register */
134#define EMAC_WKUP_FFMSK1 0xFFC03034 /* Wake-Up Frame Filter 1 Byte Mask Register */
135#define EMAC_WKUP_FFMSK2 0xFFC03038 /* Wake-Up Frame Filter 2 Byte Mask Register */
136#define EMAC_WKUP_FFMSK3 0xFFC0303C /* Wake-Up Frame Filter 3 Byte Mask Register */
137#define EMAC_WKUP_FFCMD 0xFFC03040 /* Wake-Up Frame Filter Commands Register */
138#define EMAC_WKUP_FFOFF 0xFFC03044 /* Wake-Up Frame Filter Offsets Register */
139#define EMAC_WKUP_FFCRC0 0xFFC03048 /* Wake-Up Frame Filter 0,1 CRC-16 Register */
140#define EMAC_WKUP_FFCRC1 0xFFC0304C /* Wake-Up Frame Filter 2,3 CRC-16 Register */
141#define EMAC_SYSCTL 0xFFC03060 /* EMAC System Control Register */
142#define EMAC_SYSTAT 0xFFC03064 /* EMAC System Status Register */
143#define EMAC_RX_STAT 0xFFC03068 /* RX Current Frame Status Register */
144#define EMAC_RX_STKY 0xFFC0306C /* RX Sticky Frame Status Register */
145#define EMAC_RX_IRQE 0xFFC03070 /* RX Frame Status Interrupt Enables Register */
146#define EMAC_TX_STAT 0xFFC03074 /* TX Current Frame Status Register */
147#define EMAC_TX_STKY 0xFFC03078 /* TX Sticky Frame Status Register */
148#define EMAC_TX_IRQE 0xFFC0307C /* TX Frame Status Interrupt Enables Register */
149#define EMAC_MMC_CTL 0xFFC03080 /* MMC Counter Control Register */
150#define EMAC_MMC_RIRQS 0xFFC03084 /* MMC RX Interrupt Status Register */
151#define EMAC_MMC_RIRQE 0xFFC03088 /* MMC RX Interrupt Enables Register */
152#define EMAC_MMC_TIRQS 0xFFC0308C /* MMC TX Interrupt Status Register */
153#define EMAC_MMC_TIRQE 0xFFC03090 /* MMC TX Interrupt Enables Register */
154#define EMAC_RXC_OK 0xFFC03100 /* RX Frame Successful Count */
155#define EMAC_RXC_FCS 0xFFC03104 /* RX Frame FCS Failure Count */
156#define EMAC_RXC_ALIGN 0xFFC03108 /* RX Alignment Error Count */
157#define EMAC_RXC_OCTET 0xFFC0310C /* RX Octets Successfully Received Count */
158#define EMAC_RXC_DMAOVF 0xFFC03110 /* Internal MAC Sublayer Error RX Frame Count */
159#define EMAC_RXC_UNICST 0xFFC03114 /* Unicast RX Frame Count */
160#define EMAC_RXC_MULTI 0xFFC03118 /* Multicast RX Frame Count */
161#define EMAC_RXC_BROAD 0xFFC0311C /* Broadcast RX Frame Count */
162#define EMAC_RXC_LNERRI 0xFFC03120 /* RX Frame In Range Error Count */
163#define EMAC_RXC_LNERRO 0xFFC03124 /* RX Frame Out Of Range Error Count */
164#define EMAC_RXC_LONG 0xFFC03128 /* RX Frame Too Long Count */
165#define EMAC_RXC_MACCTL 0xFFC0312C /* MAC Control RX Frame Count */
166#define EMAC_RXC_OPCODE 0xFFC03130 /* Unsupported Op-Code RX Frame Count */
167#define EMAC_RXC_PAUSE 0xFFC03134 /* MAC Control Pause RX Frame Count */
168#define EMAC_RXC_ALLFRM 0xFFC03138 /* Overall RX Frame Count */
169#define EMAC_RXC_ALLOCT 0xFFC0313C /* Overall RX Octet Count */
170#define EMAC_RXC_TYPED 0xFFC03140 /* Type/Length Consistent RX Frame Count */
171#define EMAC_RXC_SHORT 0xFFC03144 /* RX Frame Fragment Count - Byte Count x < 64 */
172#define EMAC_RXC_EQ64 0xFFC03148 /* Good RX Frame Count - Byte Count x = 64 */
173#define EMAC_RXC_LT128 0xFFC0314C /* Good RX Frame Count - Byte Count 64 <= x < 128 */
174#define EMAC_RXC_LT256 0xFFC03150 /* Good RX Frame Count - Byte Count 128 <= x < 256 */
175#define EMAC_RXC_LT512 0xFFC03154 /* Good RX Frame Count - Byte Count 256 <= x < 512 */
176#define EMAC_RXC_LT1024 0xFFC03158 /* Good RX Frame Count - Byte Count 512 <= x < 1024 */
177#define EMAC_RXC_GE1024 0xFFC0315C /* Good RX Frame Count - Byte Count x >= 1024 */
178#define EMAC_TXC_OK 0xFFC03180 /* TX Frame Successful Count */
179#define EMAC_TXC_1COL 0xFFC03184 /* TX Frames Successful After Single Collision Count */
180#define EMAC_TXC_GT1COL 0xFFC03188 /* TX Frames Successful After Multiple Collisions Count */
181#define EMAC_TXC_OCTET 0xFFC0318C /* TX Octets Successfully Received Count */
182#define EMAC_TXC_DEFER 0xFFC03190 /* TX Frame Delayed Due To Busy Count */
183#define EMAC_TXC_LATECL 0xFFC03194 /* Late TX Collisions Count */
184#define EMAC_TXC_XS_COL 0xFFC03198 /* TX Frame Failed Due To Excessive Collisions Count */
185#define EMAC_TXC_DMAUND 0xFFC0319C /* Internal MAC Sublayer Error TX Frame Count */
186#define EMAC_TXC_CRSERR 0xFFC031A0 /* Carrier Sense Deasserted During TX Frame Count */
187#define EMAC_TXC_UNICST 0xFFC031A4 /* Unicast TX Frame Count */
188#define EMAC_TXC_MULTI 0xFFC031A8 /* Multicast TX Frame Count */
189#define EMAC_TXC_BROAD 0xFFC031AC /* Broadcast TX Frame Count */
190#define EMAC_TXC_XS_DFR 0xFFC031B0 /* TX Frames With Excessive Deferral Count */
191#define EMAC_TXC_MACCTL 0xFFC031B4 /* MAC Control TX Frame Count */
192#define EMAC_TXC_ALLFRM 0xFFC031B8 /* Overall TX Frame Count */
193#define EMAC_TXC_ALLOCT 0xFFC031BC /* Overall TX Octet Count */
194#define EMAC_TXC_EQ64 0xFFC031C0 /* Good TX Frame Count - Byte Count x = 64 */
195#define EMAC_TXC_LT128 0xFFC031C4 /* Good TX Frame Count - Byte Count 64 <= x < 128 */
196#define EMAC_TXC_LT256 0xFFC031C8 /* Good TX Frame Count - Byte Count 128 <= x < 256 */
197#define EMAC_TXC_LT512 0xFFC031CC /* Good TX Frame Count - Byte Count 256 <= x < 512 */
198#define EMAC_TXC_LT1024 0xFFC031D0 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */
199#define EMAC_TXC_GE1024 0xFFC031D4 /* Good TX Frame Count - Byte Count x >= 1024 */
200#define EMAC_TXC_ABORT 0xFFC031D8 /* Total TX Frames Aborted Count */
201#define USB_FADDR 0xFFC03800 /* Function address register */
202#define USB_POWER 0xFFC03804 /* Power management register */
203#define USB_INTRTX 0xFFC03808 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */
204#define USB_INTRRX 0xFFC0380C /* Interrupt register for Rx endpoints 1 to 7 */
205#define USB_INTRTXE 0xFFC03810 /* Interrupt enable register for IntrTx */
206#define USB_INTRRXE 0xFFC03814 /* Interrupt enable register for IntrRx */
207#define USB_INTRUSB 0xFFC03818 /* Interrupt register for common USB interrupts */
208#define USB_INTRUSBE 0xFFC0381C /* Interrupt enable register for IntrUSB */
209#define USB_FRAME 0xFFC03820 /* USB frame number */
210#define USB_INDEX 0xFFC03824 /* Index register for selecting the indexed endpoint registers */
211#define USB_TESTMODE 0xFFC03828 /* Enabled USB 20 test modes */
212#define USB_GLOBINTR 0xFFC0382C /* Global Interrupt Mask register and Wakeup Exception Interrupt */
213#define USB_GLOBAL_CTL 0xFFC03830 /* Global Clock Control for the core */
214#define USB_TX_MAX_PACKET 0xFFC03840 /* Maximum packet size for Host Tx endpoint */
215#define USB_CSR0 0xFFC03844 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
216#define USB_TXCSR 0xFFC03844 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
217#define USB_RX_MAX_PACKET 0xFFC03848 /* Maximum packet size for Host Rx endpoint */
218#define USB_RXCSR 0xFFC0384C /* Control Status register for Host Rx endpoint */
219#define USB_COUNT0 0xFFC03850 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
220#define USB_RXCOUNT 0xFFC03850 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
221#define USB_TXTYPE 0xFFC03854 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */
222#define USB_NAKLIMIT0 0xFFC03858 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
223#define USB_TXINTERVAL 0xFFC03858 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
224#define USB_RXTYPE 0xFFC0385C /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */
225#define USB_RXINTERVAL 0xFFC03860 /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */
226#define USB_TXCOUNT 0xFFC03868 /* Number of bytes to be written to the selected endpoint Tx FIFO */
227#define USB_EP0_FIFO 0xFFC03880 /* Endpoint 0 FIFO */
228#define USB_EP1_FIFO 0xFFC03888 /* Endpoint 1 FIFO */
229#define USB_EP2_FIFO 0xFFC03890 /* Endpoint 2 FIFO */
230#define USB_EP3_FIFO 0xFFC03898 /* Endpoint 3 FIFO */
231#define USB_EP4_FIFO 0xFFC038A0 /* Endpoint 4 FIFO */
232#define USB_EP5_FIFO 0xFFC038A8 /* Endpoint 5 FIFO */
233#define USB_EP6_FIFO 0xFFC038B0 /* Endpoint 6 FIFO */
234#define USB_EP7_FIFO 0xFFC038B8 /* Endpoint 7 FIFO */
235#define USB_OTG_DEV_CTL 0xFFC03900 /* OTG Device Control Register */
236#define USB_OTG_VBUS_IRQ 0xFFC03904 /* OTG VBUS Control Interrupts */
237#define USB_OTG_VBUS_MASK 0xFFC03908 /* VBUS Control Interrupt Enable */
238#define USB_LINKINFO 0xFFC03948 /* Enables programming of some PHY-side delays */
239#define USB_VPLEN 0xFFC0394C /* Determines duration of VBUS pulse for VBUS charging */
240#define USB_HS_EOF1 0xFFC03950 /* Time buffer for High-Speed transactions */
241#define USB_FS_EOF1 0xFFC03954 /* Time buffer for Full-Speed transactions */
242#define USB_LS_EOF1 0xFFC03958 /* Time buffer for Low-Speed transactions */
243#define USB_APHY_CNTRL 0xFFC039E0 /* Register that increases visibility of Analog PHY */
244#define USB_APHY_CALIB 0xFFC039E4 /* Register used to set some calibration values */
245#define USB_APHY_CNTRL2 0xFFC039E8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */
246#define USB_PHY_TEST 0xFFC039EC /* Used for reducing simulation time and simplifies FIFO testability */
247#define USB_PLLOSC_CTRL 0xFFC039F0 /* Used to program different parameters for USB PLL and Oscillator */
248#define USB_SRP_CLKDIV 0xFFC039F4 /* Used to program clock divide value for the clock fed to the SRP detection logic */
249#define USB_EP_NI0_TXMAXP 0xFFC03A00 /* Maximum packet size for Host Tx endpoint0 */
250#define USB_EP_NI0_TXCSR 0xFFC03A04 /* Control Status register for endpoint 0 */
251#define USB_EP_NI0_RXMAXP 0xFFC03A08 /* Maximum packet size for Host Rx endpoint0 */
252#define USB_EP_NI0_RXCSR 0xFFC03A0C /* Control Status register for Host Rx endpoint0 */
253#define USB_EP_NI0_RXCOUNT 0xFFC03A10 /* Number of bytes received in endpoint 0 FIFO */
254#define USB_EP_NI0_TXTYPE 0xFFC03A14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */
255#define USB_EP_NI0_TXINTERVAL 0xFFC03A18 /* Sets the NAK response timeout on Endpoint 0 */
256#define USB_EP_NI0_RXTYPE 0xFFC03A1C /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */
257#define USB_EP_NI0_RXINTERVAL 0xFFC03A20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */
258#define USB_EP_NI0_TXCOUNT 0xFFC03A28 /* Number of bytes to be written to the endpoint0 Tx FIFO */
259#define USB_EP_NI1_TXMAXP 0xFFC03A40 /* Maximum packet size for Host Tx endpoint1 */
260#define USB_EP_NI1_TXCSR 0xFFC03A44 /* Control Status register for endpoint1 */
261#define USB_EP_NI1_RXMAXP 0xFFC03A48 /* Maximum packet size for Host Rx endpoint1 */
262#define USB_EP_NI1_RXCSR 0xFFC03A4C /* Control Status register for Host Rx endpoint1 */
263#define USB_EP_NI1_RXCOUNT 0xFFC03A50 /* Number of bytes received in endpoint1 FIFO */
264#define USB_EP_NI1_TXTYPE 0xFFC03A54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */
265#define USB_EP_NI1_TXINTERVAL 0xFFC03A58 /* Sets the NAK response timeout on Endpoint1 */
266#define USB_EP_NI1_RXTYPE 0xFFC03A5C /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */
267#define USB_EP_NI1_RXINTERVAL 0xFFC03A60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */
268#define USB_EP_NI1_TXCOUNT 0xFFC03A68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */
269#define USB_EP_NI2_TXMAXP 0xFFC03A80 /* Maximum packet size for Host Tx endpoint2 */
270#define USB_EP_NI2_TXCSR 0xFFC03A84 /* Control Status register for endpoint2 */
271#define USB_EP_NI2_RXMAXP 0xFFC03A88 /* Maximum packet size for Host Rx endpoint2 */
272#define USB_EP_NI2_RXCSR 0xFFC03A8C /* Control Status register for Host Rx endpoint2 */
273#define USB_EP_NI2_RXCOUNT 0xFFC03A90 /* Number of bytes received in endpoint2 FIFO */
274#define USB_EP_NI2_TXTYPE 0xFFC03A94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */
275#define USB_EP_NI2_TXINTERVAL 0xFFC03A98 /* Sets the NAK response timeout on Endpoint2 */
276#define USB_EP_NI2_RXTYPE 0xFFC03A9C /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */
277#define USB_EP_NI2_RXINTERVAL 0xFFC03AA0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */
278#define USB_EP_NI2_TXCOUNT 0xFFC03AA8 /* Number of bytes to be written to the endpoint2 Tx FIFO */
279#define USB_EP_NI3_TXMAXP 0xFFC03AC0 /* Maximum packet size for Host Tx endpoint3 */
280#define USB_EP_NI3_TXCSR 0xFFC03AC4 /* Control Status register for endpoint3 */
281#define USB_EP_NI3_RXMAXP 0xFFC03AC8 /* Maximum packet size for Host Rx endpoint3 */
282#define USB_EP_NI3_RXCSR 0xFFC03ACC /* Control Status register for Host Rx endpoint3 */
283#define USB_EP_NI3_RXCOUNT 0xFFC03AD0 /* Number of bytes received in endpoint3 FIFO */
284#define USB_EP_NI3_TXTYPE 0xFFC03AD4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */
285#define USB_EP_NI3_TXINTERVAL 0xFFC03AD8 /* Sets the NAK response timeout on Endpoint3 */
286#define USB_EP_NI3_RXTYPE 0xFFC03ADC /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */
287#define USB_EP_NI3_RXINTERVAL 0xFFC03AE0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */
288#define USB_EP_NI3_TXCOUNT 0xFFC03AE8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */
289#define USB_EP_NI4_TXMAXP 0xFFC03B00 /* Maximum packet size for Host Tx endpoint4 */
290#define USB_EP_NI4_TXCSR 0xFFC03B04 /* Control Status register for endpoint4 */
291#define USB_EP_NI4_RXMAXP 0xFFC03B08 /* Maximum packet size for Host Rx endpoint4 */
292#define USB_EP_NI4_RXCSR 0xFFC03B0C /* Control Status register for Host Rx endpoint4 */
293#define USB_EP_NI4_RXCOUNT 0xFFC03B10 /* Number of bytes received in endpoint4 FIFO */
294#define USB_EP_NI4_TXTYPE 0xFFC03B14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */
295#define USB_EP_NI4_TXINTERVAL 0xFFC03B18 /* Sets the NAK response timeout on Endpoint4 */
296#define USB_EP_NI4_RXTYPE 0xFFC03B1C /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */
297#define USB_EP_NI4_RXINTERVAL 0xFFC03B20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */
298#define USB_EP_NI4_TXCOUNT 0xFFC03B28 /* Number of bytes to be written to the endpoint4 Tx FIFO */
299#define USB_EP_NI5_TXMAXP 0xFFC03B40 /* Maximum packet size for Host Tx endpoint5 */
300#define USB_EP_NI5_TXCSR 0xFFC03B44 /* Control Status register for endpoint5 */
301#define USB_EP_NI5_RXMAXP 0xFFC03B48 /* Maximum packet size for Host Rx endpoint5 */
302#define USB_EP_NI5_RXCSR 0xFFC03B4C /* Control Status register for Host Rx endpoint5 */
303#define USB_EP_NI5_RXCOUNT 0xFFC03B50 /* Number of bytes received in endpoint5 FIFO */
304#define USB_EP_NI5_TXTYPE 0xFFC03B54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */
305#define USB_EP_NI5_TXINTERVAL 0xFFC03B58 /* Sets the NAK response timeout on Endpoint5 */
306#define USB_EP_NI5_RXTYPE 0xFFC03B5C /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */
307#define USB_EP_NI5_RXINTERVAL 0xFFC03B60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */
308#define USB_EP_NI5_TXCOUNT 0xFFC03B68 /* Number of bytes to be written to the endpoint5 Tx FIFO */
309#define USB_EP_NI6_TXMAXP 0xFFC03B80 /* Maximum packet size for Host Tx endpoint6 */
310#define USB_EP_NI6_TXCSR 0xFFC03B84 /* Control Status register for endpoint6 */
311#define USB_EP_NI6_RXMAXP 0xFFC03B88 /* Maximum packet size for Host Rx endpoint6 */
312#define USB_EP_NI6_RXCSR 0xFFC03B8C /* Control Status register for Host Rx endpoint6 */
313#define USB_EP_NI6_RXCOUNT 0xFFC03B90 /* Number of bytes received in endpoint6 FIFO */
314#define USB_EP_NI6_TXTYPE 0xFFC03B94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */
315#define USB_EP_NI6_TXINTERVAL 0xFFC03B98 /* Sets the NAK response timeout on Endpoint6 */
316#define USB_EP_NI6_RXTYPE 0xFFC03B9C /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */
317#define USB_EP_NI6_RXINTERVAL 0xFFC03BA0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */
318#define USB_EP_NI6_TXCOUNT 0xFFC03BA8 /* Number of bytes to be written to the endpoint6 Tx FIFO */
319#define USB_EP_NI7_TXMAXP 0xFFC03BC0 /* Maximum packet size for Host Tx endpoint7 */
320#define USB_EP_NI7_TXCSR 0xFFC03BC4 /* Control Status register for endpoint7 */
321#define USB_EP_NI7_RXMAXP 0xFFC03BC8 /* Maximum packet size for Host Rx endpoint7 */
322#define USB_EP_NI7_RXCSR 0xFFC03BCC /* Control Status register for Host Rx endpoint7 */
323#define USB_EP_NI7_RXCOUNT 0xFFC03BD0 /* Number of bytes received in endpoint7 FIFO */
324#define USB_EP_NI7_TXTYPE 0xFFC03BD4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */
325#define USB_EP_NI7_TXINTERVAL 0xFFC03BD8 /* Sets the NAK response timeout on Endpoint7 */
326#define USB_EP_NI7_RXTYPE 0xFFC03BDC /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */
327#define USB_EP_NI7_RXINTERVAL 0xFFC03BF0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */
328#define USB_EP_NI7_TXCOUNT 0xFFC03BF8 /* Number of bytes to be written to the endpoint7 Tx FIFO */
329#define USB_DMA_INTERRUPT 0xFFC03C00 /* Indicates pending interrupts for the DMA channels */
330#define USB_DMA0_CONTROL 0xFFC03C04 /* DMA master channel 0 configuration */
331#define USB_DMA0_ADDRLOW 0xFFC03C08 /* Lower 16-bits of memory source/destination address for DMA master channel 0 */
332#define USB_DMA0_ADDRHIGH 0xFFC03C0C /* Upper 16-bits of memory source/destination address for DMA master channel 0 */
333#define USB_DMA0_COUNTLOW 0xFFC03C10 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */
334#define USB_DMA0_COUNTHIGH 0xFFC03C14 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */
335#define USB_DMA1_CONTROL 0xFFC03C24 /* DMA master channel 1 configuration */
336#define USB_DMA1_ADDRLOW 0xFFC03C28 /* Lower 16-bits of memory source/destination address for DMA master channel 1 */
337#define USB_DMA1_ADDRHIGH 0xFFC03C2C /* Upper 16-bits of memory source/destination address for DMA master channel 1 */
338#define USB_DMA1_COUNTLOW 0xFFC03C30 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */
339#define USB_DMA1_COUNTHIGH 0xFFC03C34 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */
340#define USB_DMA2_CONTROL 0xFFC03C44 /* DMA master channel 2 configuration */
341#define USB_DMA2_ADDRLOW 0xFFC03C48 /* Lower 16-bits of memory source/destination address for DMA master channel 2 */
342#define USB_DMA2_ADDRHIGH 0xFFC03C4C /* Upper 16-bits of memory source/destination address for DMA master channel 2 */
343#define USB_DMA2_COUNTLOW 0xFFC03C50 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */
344#define USB_DMA2_COUNTHIGH 0xFFC03C54 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */
345#define USB_DMA3_CONTROL 0xFFC03C64 /* DMA master channel 3 configuration */
346#define USB_DMA3_ADDRLOW 0xFFC03C68 /* Lower 16-bits of memory source/destination address for DMA master channel 3 */
347#define USB_DMA3_ADDRHIGH 0xFFC03C6C /* Upper 16-bits of memory source/destination address for DMA master channel 3 */
348#define USB_DMA3_COUNTLOW 0xFFC03C70 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */
349#define USB_DMA3_COUNTHIGH 0xFFC03C74 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */
350#define USB_DMA4_CONTROL 0xFFC03C84 /* DMA master channel 4 configuration */
351#define USB_DMA4_ADDRLOW 0xFFC03C88 /* Lower 16-bits of memory source/destination address for DMA master channel 4 */
352#define USB_DMA4_ADDRHIGH 0xFFC03C8C /* Upper 16-bits of memory source/destination address for DMA master channel 4 */
353#define USB_DMA4_COUNTLOW 0xFFC03C90 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */
354#define USB_DMA4_COUNTHIGH 0xFFC03C94 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */
355#define USB_DMA5_CONTROL 0xFFC03CA4 /* DMA master channel 5 configuration */
356#define USB_DMA5_ADDRLOW 0xFFC03CA8 /* Lower 16-bits of memory source/destination address for DMA master channel 5 */
357#define USB_DMA5_ADDRHIGH 0xFFC03CAC /* Upper 16-bits of memory source/destination address for DMA master channel 5 */
358#define USB_DMA5_COUNTLOW 0xFFC03CB0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */
359#define USB_DMA5_COUNTHIGH 0xFFC03CB4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */
360#define USB_DMA6_CONTROL 0xFFC03CC4 /* DMA master channel 6 configuration */
361#define USB_DMA6_ADDRLOW 0xFFC03CC8 /* Lower 16-bits of memory source/destination address for DMA master channel 6 */
362#define USB_DMA6_ADDRHIGH 0xFFC03CCC /* Upper 16-bits of memory source/destination address for DMA master channel 6 */
363#define USB_DMA6_COUNTLOW 0xFFC03CD0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */
364#define USB_DMA6_COUNTHIGH 0xFFC03CD4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */
365#define USB_DMA7_CONTROL 0xFFC03CE4 /* DMA master channel 7 configuration */
366#define USB_DMA7_ADDRLOW 0xFFC03CE8 /* Lower 16-bits of memory source/destination address for DMA master channel 7 */
367#define USB_DMA7_ADDRHIGH 0xFFC03CEC /* Upper 16-bits of memory source/destination address for DMA master channel 7 */
368#define USB_DMA7_COUNTLOW 0xFFC03CF0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */
369#define USB_DMA7_COUNTHIGH 0xFFC03CF4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */
370#define L1_DATA_A_SRAM 0xFF800000 /* 0xFF800000 -> 0xFF803FFF Data Bank A SRAM */
371#define L1_DATA_A_SRAM_SIZE (0xFF803FFF - 0xFF800000 + 1)
372#define L1_DATA_A_SRAM_END (L1_DATA_A_SRAM + L1_DATA_A_SRAM_SIZE)
373#define L1_DATA_B_SRAM 0xFF900000 /* 0xFF900000 -> 0xFF903FFF Data Bank B SRAM */
374#define L1_DATA_B_SRAM_SIZE (0xFF903FFF - 0xFF900000 + 1)
375#define L1_DATA_B_SRAM_END (L1_DATA_B_SRAM + L1_DATA_B_SRAM_SIZE)
376#define L1_INST_SRAM 0xFFA00000 /* 0xFFA00000 -> 0xFFA07FFF Instruction Bank A SRAM */
377#define L1_INST_SRAM_SIZE (0xFFA07FFF - 0xFFA00000 + 1)
378#define L1_INST_SRAM_END (L1_INST_SRAM + L1_INST_SRAM_SIZE)
379#define L1_SRAM_SCRATCH 0xFFB00000 /* 0xFFB00000 -> 0xFFB00FFF Scratchpad SRAM */
380#define L1_SRAM_SCRATCH_SIZE (0xFFB00FFF - 0xFFB00000 + 1)
381#define L1_SRAM_SCRATCH_END (L1_SRAM_SCRATCH + L1_SRAM_SCRATCH_SIZE)
382#define SYSMMR_BASE 0xFFC00000 /* 0xFFC00000 -> 0xFFFFFFFF MMR registers */
383#define SYSMMR_BASE_SIZE (0xFFFFFFFF - 0xFFC00000 + 1)
384#define SYSMMR_BASE_END (SYSMMR_BASE + SYSMMR_BASE_SIZE)
385
386#endif /* __BFIN_DEF_ADSP_BF527_proc__ */