blob: a7dd86d30fa2711ba2533670cff0cc8559377505 [file] [log] [blame]
Hans de Goede53ab4af2015-04-15 19:03:49 +02001/*
2 * Copyright 2012 Maxime Ripard
3 *
4 * Maxime Ripard <maxime.ripard@free-electrons.com>
5 *
6 * This file is dual-licensed: you can use it either under the terms
7 * of the GPL or the X11 license, at your option. Note that this dual
8 * licensing only applies to this file, and not this project as a
9 * whole.
10 *
11 * a) This file is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; either version 2 of the
14 * License, or (at your option) any later version.
15 *
16 * This file is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
20 *
Hans de Goede53ab4af2015-04-15 19:03:49 +020021 * Or, alternatively,
22 *
23 * b) Permission is hereby granted, free of charge, to any person
24 * obtaining a copy of this software and associated documentation
25 * files (the "Software"), to deal in the Software without
26 * restriction, including without limitation the rights to use,
27 * copy, modify, merge, publish, distribute, sublicense, and/or
28 * sell copies of the Software, and to permit persons to whom the
29 * Software is furnished to do so, subject to the following
30 * conditions:
31 *
32 * The above copyright notice and this permission notice shall be
33 * included in all copies or substantial portions of the Software.
34 *
35 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
36 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
37 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
38 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
39 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
40 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
41 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
42 * OTHER DEALINGS IN THE SOFTWARE.
43 */
44
45/dts-v1/;
46#include "sun4i-a10.dtsi"
47#include "sunxi-common-regulators.dtsi"
48
49#include <dt-bindings/gpio/gpio.h>
50#include <dt-bindings/pinctrl/sun4i-a10.h>
51
52/ {
53 model = "PineRiver Mini X-Plus";
54 compatible = "pineriver,mini-xplus", "allwinner,sun4i-a10";
55
56 aliases {
57 serial0 = &uart0;
58 };
59
60 chosen {
61 stdout-path = "serial0:115200n8";
62 };
63};
64
65&ehci0 {
66 status = "okay";
67};
68
69&ehci1 {
70 status = "okay";
71};
72
73&i2c0 {
74 pinctrl-names = "default";
75 pinctrl-0 = <&i2c0_pins_a>;
76 status = "okay";
77
78 axp209: pmic@34 {
79 compatible = "x-powers,axp209";
80 reg = <0x34>;
81 interrupts = <0>;
82
83 interrupt-controller;
84 #interrupt-cells = <1>;
85 };
86};
87
88&ir0 {
89 pinctrl-names = "default";
Hans de Goede8b1ba942015-06-02 15:53:40 +020090 pinctrl-0 = <&ir0_rx_pins_a>;
Hans de Goede53ab4af2015-04-15 19:03:49 +020091 status = "okay";
92};
93
Hans de Goede8b1ba942015-06-02 15:53:40 +020094&ir0_rx_pins_a {
Hans de Goede53ab4af2015-04-15 19:03:49 +020095 /* The ir receiver is not always populated */
96 allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
97};
98
99&mmc0 {
100 pinctrl-names = "default";
101 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
102 vmmc-supply = <&reg_vcc3v3>;
103 bus-width = <4>;
104 cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
105 cd-inverted;
106 status = "okay";
107};
108
109&ohci0 {
110 status = "okay";
111};
112
113&ohci1 {
114 status = "okay";
115};
116
Hans de Goededa52a4a2015-08-05 17:39:14 +0200117&otg_sram {
118 status = "okay";
119};
120
121&reg_usb0_vbus {
122 regulator-boot-on;
123 status = "okay";
124};
125
Hans de Goede53ab4af2015-04-15 19:03:49 +0200126&reg_usb1_vbus {
127 status = "okay";
128};
129
130&reg_usb2_vbus {
131 status = "okay";
132};
133
134&uart0 {
135 pinctrl-names = "default";
136 pinctrl-0 = <&uart0_pins_a>;
137 status = "okay";
138};
139
Hans de Goededa52a4a2015-08-05 17:39:14 +0200140&usb_otg {
141 dr_mode = "host";
142 status = "okay";
143};
144
Hans de Goede53ab4af2015-04-15 19:03:49 +0200145&usbphy {
Hans de Goededa52a4a2015-08-05 17:39:14 +0200146 usb0_vbus-supply = <&reg_usb0_vbus>;
Hans de Goede53ab4af2015-04-15 19:03:49 +0200147 usb1_vbus-supply = <&reg_usb1_vbus>;
148 usb2_vbus-supply = <&reg_usb2_vbus>;
149 status = "okay";
150};