blob: c1ad35a018b7ca52ebe3e9a11edbaaccab1492eb [file] [log] [blame]
Chunhe Lan0b2e13d2014-04-14 18:42:06 +08001/*
2 * Copyright 2014 Freescale Semiconductor, Inc.
3 *
4 * SPDX-License-Identifier: GPL-2.0+
5 */
6
7/*
8 * T4240 RDB board configuration file
9 */
10#ifndef __CONFIG_H
11#define __CONFIG_H
12
13#define CONFIG_T4240RDB
14#define CONFIG_PHYS_64BIT
Chunhe Lan9a509cf2014-12-01 16:21:01 +080015#define CONFIG_SYS_GENERIC_BOARD
16#define CONFIG_DISPLAY_BOARDINFO
Chunhe Lan0b2e13d2014-04-14 18:42:06 +080017
18#define CONFIG_FSL_SATA_V2
19#define CONFIG_PCIE4
20
21#define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */
22
23#ifdef CONFIG_RAMBOOT_PBL
24#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE
25#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
26#define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t4rdb/t4_pbi.cfg
27#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t4rdb/t4_rcw.cfg
28#endif
29
30#define CONFIG_DDR_ECC
31
32#define CONFIG_CMD_REGINFO
33
34/* High Level Configuration Options */
35#define CONFIG_BOOKE
36#define CONFIG_E500 /* BOOKE e500 family */
37#define CONFIG_E500MC /* BOOKE e500mc family */
38#define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */
39#define CONFIG_MP /* support multiple processors */
40
41#ifndef CONFIG_SYS_TEXT_BASE
42#define CONFIG_SYS_TEXT_BASE 0xeff40000
43#endif
44
45#ifndef CONFIG_RESET_VECTOR_ADDRESS
46#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc
47#endif
48
49#define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */
50#define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS
51#define CONFIG_FSL_IFC /* Enable IFC Support */
Ruchika Gupta737537e2014-10-15 11:35:31 +053052#define CONFIG_FSL_CAAM /* Enable SEC/CAAM */
Chunhe Lan0b2e13d2014-04-14 18:42:06 +080053#define CONFIG_PCI /* Enable PCI/PCIE */
54#define CONFIG_PCIE1 /* PCIE controler 1 */
55#define CONFIG_PCIE2 /* PCIE controler 2 */
56#define CONFIG_PCIE3 /* PCIE controler 3 */
57#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
58#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
59
60#define CONFIG_FSL_LAW /* Use common FSL init code */
61
62#define CONFIG_ENV_OVERWRITE
63
64/*
65 * These can be toggled for performance analysis, otherwise use default.
66 */
67#define CONFIG_SYS_CACHE_STASHING
68#define CONFIG_BTB /* toggle branch predition */
69#ifdef CONFIG_DDR_ECC
70#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
71#define CONFIG_MEM_INIT_VALUE 0xdeadbeef
72#endif
73
74#define CONFIG_ENABLE_36BIT_PHYS
75
76#define CONFIG_ADDR_MAP
77#define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */
78
79#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
80#define CONFIG_SYS_MEMTEST_END 0x00400000
81#define CONFIG_SYS_ALT_MEMTEST
82#define CONFIG_PANIC_HANG /* do not reset board on panic */
83
84/*
85 * Config the L3 Cache as L3 SRAM
86 */
87#define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE
88
89#define CONFIG_SYS_DCSRBAR 0xf0000000
90#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull
91
92/*
93 * DDR Setup
94 */
95#define CONFIG_VERY_BIG_RAM
96#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
97#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
98
99/* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
100#define CONFIG_DIMM_SLOTS_PER_CTLR 1
101#define CONFIG_CHIP_SELECTS_PER_CTRL 4
102#define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
103
104#define CONFIG_DDR_SPD
105#define CONFIG_SYS_FSL_DDR3
106
107
108/*
109 * IFC Definitions
110 */
111#define CONFIG_SYS_FLASH_BASE 0xe0000000
112#define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
113
114
115#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
116
117#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */
118#define CONFIG_MISC_INIT_R
119
120#define CONFIG_HWCONFIG
121
122/* define to use L1 as initial stack */
123#define CONFIG_L1_INIT_RAM
124#define CONFIG_SYS_INIT_RAM_LOCK
125#define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */
126#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
127#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe0ec000
128/* The assembler doesn't like typecast */
129#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
130 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
131 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
132#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000
133
134#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
135 GENERATED_GBL_DATA_SIZE)
136#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
137
138#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
139#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
140
141/* Serial Port - controlled on board with jumper J8
142 * open - index 2
143 * shorted - index 1
144 */
145#define CONFIG_CONS_INDEX 1
146#define CONFIG_SYS_NS16550
147#define CONFIG_SYS_NS16550_SERIAL
148#define CONFIG_SYS_NS16550_REG_SIZE 1
149#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2)
150
151#define CONFIG_SYS_BAUDRATE_TABLE \
152 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
153
154#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
155#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
156#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
157#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
158
159/* Use the HUSH parser */
160#define CONFIG_SYS_HUSH_PARSER
161#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
162
163/* pass open firmware flat tree */
164#define CONFIG_OF_LIBFDT
165#define CONFIG_OF_BOARD_SETUP
166#define CONFIG_OF_STDOUT_VIA_ALIAS
167
168/* new uImage format support */
169#define CONFIG_FIT
170#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */
171
172/* I2C */
173#define CONFIG_SYS_I2C
174#define CONFIG_SYS_I2C_FSL
175#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
176#define CONFIG_SYS_FSL_I2C_OFFSET 0x118000
177#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F
178#define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100
179
180/*
181 * General PCI
182 * Memory space is mapped 1-1, but I/O space must start from 0.
183 */
184
185/* controller 1, direct to uli, tgtid 3, Base address 20000 */
186#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000
187#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000
188#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull
189#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
190#define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000
191#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
192#define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull
193#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */
194
195/* controller 2, Slot 2, tgtid 2, Base address 201000 */
196#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000
197#define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000
198#define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull
199#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */
200#define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000
201#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000
202#define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull
203#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */
204
205/* controller 3, Slot 1, tgtid 1, Base address 202000 */
206#define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000
207#define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000
208#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull
209#define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */
210#define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000
211#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000
212#define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull
213#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */
214
215/* controller 4, Base address 203000 */
216#define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000
217#define CONFIG_SYS_PCIE4_MEM_PHYS 0xc60000000ull
218#define CONFIG_SYS_PCIE4_MEM_SIZE 0x20000000 /* 512M */
219#define CONFIG_SYS_PCIE4_IO_BUS 0x00000000
220#define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull
221#define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */
222
223#ifdef CONFIG_PCI
224#define CONFIG_PCI_INDIRECT_BRIDGE
225#define CONFIG_NET_MULTI
226#define CONFIG_PCI_PNP /* do pci plug-and-play */
227#define CONFIG_E1000
228
229#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
230#define CONFIG_DOS_PARTITION
231#endif /* CONFIG_PCI */
232
233/* SATA */
234#ifdef CONFIG_FSL_SATA_V2
235#define CONFIG_LIBATA
236#define CONFIG_FSL_SATA
237
238#define CONFIG_SYS_SATA_MAX_DEVICE 2
239#define CONFIG_SATA1
240#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR
241#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
242#define CONFIG_SATA2
243#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR
244#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA
245
246#define CONFIG_LBA48
247#define CONFIG_CMD_SATA
248#define CONFIG_DOS_PARTITION
249#define CONFIG_CMD_EXT2
250#endif
251
252#ifdef CONFIG_FMAN_ENET
253#define CONFIG_MII /* MII PHY management */
254#define CONFIG_ETHPRIME "FM1@DTSEC1"
255#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
256#endif
257
258/*
259 * Environment
260 */
261#define CONFIG_LOADS_ECHO /* echo on for serial download */
262#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
263
264/*
265 * Command line configuration.
266 */
267#include <config_cmd_default.h>
268
269#define CONFIG_CMD_DHCP
270#define CONFIG_CMD_ELF
271#define CONFIG_CMD_ERRATA
272#define CONFIG_CMD_GREPENV
273#define CONFIG_CMD_IRQ
274#define CONFIG_CMD_I2C
275#define CONFIG_CMD_MII
276#define CONFIG_CMD_PING
277#define CONFIG_CMD_SETEXPR
278
279#ifdef CONFIG_PCI
280#define CONFIG_CMD_PCI
281#define CONFIG_CMD_NET
282#endif
283
284/*
285 * Miscellaneous configurable options
286 */
287#define CONFIG_SYS_LONGHELP /* undef to save memory */
288#define CONFIG_CMDLINE_EDITING /* Command-line editing */
289#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
290#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
291#ifdef CONFIG_CMD_KGDB
292#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
293#else
294#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
295#endif
296#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
297#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
298#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
299
300/*
301 * For booting Linux, the board info and command line data
302 * have to be in the first 64 MB of memory, since this is
303 * the maximum mapped by the Linux kernel during initialization.
304 */
305#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/
306#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
307
308#ifdef CONFIG_CMD_KGDB
309#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
310#endif
311
312/*
313 * Environment Configuration
314 */
315#define CONFIG_ROOTPATH "/opt/nfsroot"
316#define CONFIG_BOOTFILE "uImage"
317#define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/
318
319/* default location for tftp and bootm */
320#define CONFIG_LOADADDR 1000000
321
322
323#define CONFIG_BAUDRATE 115200
324
325#define CONFIG_HVBOOT \
326 "setenv bootargs config-addr=0x60000000; " \
327 "bootm 0x01000000 - 0x00f00000"
328
329#ifdef CONFIG_SYS_NO_FLASH
330#ifndef CONFIG_RAMBOOT_PBL
331#define CONFIG_ENV_IS_NOWHERE
332#endif
333#else
334#define CONFIG_FLASH_CFI_DRIVER
335#define CONFIG_SYS_FLASH_CFI
336#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
337#endif
338
339#if defined(CONFIG_SPIFLASH)
340#define CONFIG_SYS_EXTRA_ENV_RELOC
341#define CONFIG_ENV_IS_IN_SPI_FLASH
342#define CONFIG_ENV_SPI_BUS 0
343#define CONFIG_ENV_SPI_CS 0
344#define CONFIG_ENV_SPI_MAX_HZ 10000000
345#define CONFIG_ENV_SPI_MODE 0
346#define CONFIG_ENV_SIZE 0x2000 /* 8KB */
347#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */
348#define CONFIG_ENV_SECT_SIZE 0x10000
349#elif defined(CONFIG_SDCARD)
350#define CONFIG_SYS_EXTRA_ENV_RELOC
351#define CONFIG_ENV_IS_IN_MMC
352#define CONFIG_SYS_MMC_ENV_DEV 0
353#define CONFIG_ENV_SIZE 0x2000
354#define CONFIG_ENV_OFFSET (512 * 1658)
355#elif defined(CONFIG_NAND)
356#define CONFIG_SYS_EXTRA_ENV_RELOC
357#define CONFIG_ENV_IS_IN_NAND
358#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
359#define CONFIG_ENV_OFFSET (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
360#elif defined(CONFIG_ENV_IS_NOWHERE)
361#define CONFIG_ENV_SIZE 0x2000
362#else
363#define CONFIG_ENV_IS_IN_FLASH
364#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
365#define CONFIG_ENV_SIZE 0x2000
366#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
367#endif
368
369#define CONFIG_SYS_CLK_FREQ 66666666
370#define CONFIG_DDR_CLK_FREQ 133333333
371
372#ifndef __ASSEMBLY__
373unsigned long get_board_sys_clk(void);
374unsigned long get_board_ddr_clk(void);
375#endif
376
377/*
378 * DDR Setup
379 */
380#define CONFIG_SYS_SPD_BUS_NUM 0
381#define SPD_EEPROM_ADDRESS1 0x52
382#define SPD_EEPROM_ADDRESS2 0x54
383#define SPD_EEPROM_ADDRESS3 0x56
384#define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */
385#define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */
386
387/*
388 * IFC Definitions
389 */
390#define CONFIG_SYS_NOR0_CSPR_EXT (0xf)
391#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
392 + 0x8000000) | \
393 CSPR_PORT_SIZE_16 | \
394 CSPR_MSEL_NOR | \
395 CSPR_V)
396#define CONFIG_SYS_NOR1_CSPR_EXT (0xf)
397#define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
398 CSPR_PORT_SIZE_16 | \
399 CSPR_MSEL_NOR | \
400 CSPR_V)
401#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024)
402/* NOR Flash Timing Params */
403#define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80
404
405#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \
406 FTIM0_NOR_TEADC(0x5) | \
407 FTIM0_NOR_TEAHC(0x5))
408#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \
409 FTIM1_NOR_TRAD_NOR(0x1A) |\
410 FTIM1_NOR_TSEQRAD_NOR(0x13))
411#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \
412 FTIM2_NOR_TCH(0x4) | \
413 FTIM2_NOR_TWPH(0x0E) | \
414 FTIM2_NOR_TWP(0x1c))
415#define CONFIG_SYS_NOR_FTIM3 0x0
416
417#define CONFIG_SYS_FLASH_QUIET_TEST
418#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
419
420#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */
421#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */
422#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
423#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
424
425#define CONFIG_SYS_FLASH_EMPTY_INFO
426#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \
427 + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
428
429/* NAND Flash on IFC */
430#define CONFIG_NAND_FSL_IFC
431#define CONFIG_SYS_NAND_MAX_ECCPOS 256
432#define CONFIG_SYS_NAND_MAX_OOBFREE 2
433#define CONFIG_SYS_NAND_BASE 0xff800000
434#define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE)
435
436#define CONFIG_SYS_NAND_CSPR_EXT (0xf)
437#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
438 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
439 | CSPR_MSEL_NAND /* MSEL = NAND */ \
440 | CSPR_V)
441#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024)
442
443#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \
444 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \
445 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \
446 | CSOR_NAND_RAL_3 /* RAL = 2Byes */ \
447 | CSOR_NAND_PGS_4K /* Page Size = 4K */ \
448 | CSOR_NAND_SPRZ_224 /* Spare size = 224 */ \
449 | CSOR_NAND_PB(128)) /*Page Per Block = 128*/
450
451#define CONFIG_SYS_NAND_ONFI_DETECTION
452
453/* ONFI NAND Flash mode0 Timing Params */
454#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \
455 FTIM0_NAND_TWP(0x18) | \
456 FTIM0_NAND_TWCHT(0x07) | \
457 FTIM0_NAND_TWH(0x0a))
458#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \
459 FTIM1_NAND_TWBE(0x39) | \
460 FTIM1_NAND_TRR(0x0e) | \
461 FTIM1_NAND_TRP(0x18))
462#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \
463 FTIM2_NAND_TREH(0x0a) | \
464 FTIM2_NAND_TWHRE(0x1e))
465#define CONFIG_SYS_NAND_FTIM3 0x0
466
467#define CONFIG_SYS_NAND_DDR_LAW 11
468#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
469#define CONFIG_SYS_MAX_NAND_DEVICE 1
Chunhe Lan0b2e13d2014-04-14 18:42:06 +0800470#define CONFIG_CMD_NAND
471
472#define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024)
473
474#if defined(CONFIG_NAND)
475#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT
476#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR
477#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK
478#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR
479#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0
480#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1
481#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2
482#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3
483#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR0_CSPR_EXT
484#define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR0_CSPR
485#define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK
486#define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR
487#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0
488#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1
489#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2
490#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3
491#else
492#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT
493#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR
494#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK
495#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR
496#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0
497#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1
498#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2
499#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3
500#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NAND_CSPR_EXT
501#define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR
502#define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK
503#define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR
504#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0
505#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1
506#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2
507#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3
508#endif
509#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT
510#define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR
511#define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK
512#define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR
513#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0
514#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1
515#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2
516#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3
517
Chunhe Lanab06b232014-09-12 14:47:09 +0800518/* CPLD on IFC */
519#define CONFIG_SYS_CPLD_BASE 0xffdf0000
520#define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
521#define CONFIG_SYS_CSPR3_EXT (0xf)
522#define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
523 | CSPR_PORT_SIZE_8 \
524 | CSPR_MSEL_GPCM \
525 | CSPR_V)
526
527#define CONFIG_SYS_AMASK3 IFC_AMASK(4*1024)
528#define CONFIG_SYS_CSOR3 0x0
529
530/* CPLD Timing parameters for IFC CS3 */
531#define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \
532 FTIM0_GPCM_TEADC(0x0e) | \
533 FTIM0_GPCM_TEAHC(0x0e))
534#define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \
535 FTIM1_GPCM_TRAD(0x1f))
536#define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \
Chunhe Lan1b5c2b52014-10-20 16:03:15 +0800537 FTIM2_GPCM_TCH(0x8) | \
Chunhe Lanab06b232014-09-12 14:47:09 +0800538 FTIM2_GPCM_TWP(0x1f))
539#define CONFIG_SYS_CS3_FTIM3 0x0
540
Chunhe Lan0b2e13d2014-04-14 18:42:06 +0800541#if defined(CONFIG_RAMBOOT_PBL)
542#define CONFIG_SYS_RAMBOOT
543#endif
544
545
546/* I2C */
547#define CONFIG_SYS_FSL_I2C_SPEED 100000 /* I2C speed */
548#define CONFIG_SYS_FSL_I2C2_SPEED 100000 /* I2C2 speed */
549#define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */
550#define I2C_MUX_PCA_ADDR_SEC 0x76 /* I2C bus multiplexer,secondary */
551
552#define I2C_MUX_CH_DEFAULT 0x8
553#define I2C_MUX_CH_VOL_MONITOR 0xa
554#define I2C_MUX_CH_VSC3316_FS 0xc
555#define I2C_MUX_CH_VSC3316_BS 0xd
556
557/* Voltage monitor on channel 2*/
558#define I2C_VOL_MONITOR_ADDR 0x40
559#define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2
560#define I2C_VOL_MONITOR_BUS_V_OVF 0x1
561#define I2C_VOL_MONITOR_BUS_V_SHIFT 3
562
563/*
564 * eSPI - Enhanced SPI
565 */
566#define CONFIG_FSL_ESPI
567#define CONFIG_SPI_FLASH
568#define CONFIG_SPI_FLASH_SST
569#define CONFIG_CMD_SF
570#define CONFIG_SF_DEFAULT_SPEED 10000000
571#define CONFIG_SF_DEFAULT_MODE 0
572
573
574/* Qman/Bman */
575#ifndef CONFIG_NOBQFMAN
576#define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */
577#define CONFIG_SYS_BMAN_NUM_PORTALS 50
578#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000
579#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull
580#define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000
Jeffrey Ladouceur3fa66db2014-12-08 14:54:01 -0500581#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000
582#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000
583#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE
584#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
585#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \
586 CONFIG_SYS_BMAN_CENA_SIZE)
587#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
588#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08
Chunhe Lan0b2e13d2014-04-14 18:42:06 +0800589#define CONFIG_SYS_QMAN_NUM_PORTALS 50
590#define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000
591#define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull
592#define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000
Jeffrey Ladouceur3fa66db2014-12-08 14:54:01 -0500593#define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000
594#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000
595#define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE
596#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
597#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \
598 CONFIG_SYS_QMAN_CENA_SIZE)
599#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
600#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08
Chunhe Lan0b2e13d2014-04-14 18:42:06 +0800601
602#define CONFIG_SYS_DPAA_FMAN
603#define CONFIG_SYS_DPAA_PME
604#define CONFIG_SYS_PMAN
605#define CONFIG_SYS_DPAA_DCE
606#define CONFIG_SYS_DPAA_RMAN
607#define CONFIG_SYS_INTERLAKEN
608
609/* Default address of microcode for the Linux Fman driver */
610#if defined(CONFIG_SPIFLASH)
611/*
612 * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
613 * env, so we got 0x110000.
614 */
615#define CONFIG_SYS_QE_FW_IN_SPIFLASH
616#define CONFIG_SYS_FMAN_FW_ADDR 0x110000
617#elif defined(CONFIG_SDCARD)
618/*
619 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
620 * about 825KB (1650 blocks), Env is stored after the image, and the env size is
621 * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
622 */
623#define CONFIG_SYS_QE_FMAN_FW_IN_MMC
624#define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680)
625#elif defined(CONFIG_NAND)
626#define CONFIG_SYS_QE_FMAN_FW_IN_NAND
627#define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
628#else
629#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
630#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
631#endif
632#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000
633#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
634#endif /* CONFIG_NOBQFMAN */
635
636#ifdef CONFIG_SYS_DPAA_FMAN
637#define CONFIG_FMAN_ENET
638#define CONFIG_PHYLIB_10G
639#define CONFIG_PHY_VITESSE
640#define CONFIG_PHY_CORTINA
641#define CONFIG_CORTINA_FW_ADDR 0xefe00000
642#define CONFIG_CORTINA_FW_LENGTH 0x40000
643#define CONFIG_PHY_TERANETICS
644#define SGMII_PHY_ADDR1 0x0
645#define SGMII_PHY_ADDR2 0x1
646#define SGMII_PHY_ADDR3 0x2
647#define SGMII_PHY_ADDR4 0x3
648#define SGMII_PHY_ADDR5 0x4
649#define SGMII_PHY_ADDR6 0x5
650#define SGMII_PHY_ADDR7 0x6
651#define SGMII_PHY_ADDR8 0x7
652#define FM1_10GEC1_PHY_ADDR 0x10
653#define FM1_10GEC2_PHY_ADDR 0x11
654#define FM2_10GEC1_PHY_ADDR 0x12
655#define FM2_10GEC2_PHY_ADDR 0x13
656#define CORTINA_PHY_ADDR1 FM1_10GEC1_PHY_ADDR
657#define CORTINA_PHY_ADDR2 FM1_10GEC2_PHY_ADDR
658#define CORTINA_PHY_ADDR3 FM2_10GEC1_PHY_ADDR
659#define CORTINA_PHY_ADDR4 FM2_10GEC2_PHY_ADDR
660#endif
661
662
663/* SATA */
664#ifdef CONFIG_FSL_SATA_V2
665#define CONFIG_LIBATA
666#define CONFIG_FSL_SATA
667
668#define CONFIG_SYS_SATA_MAX_DEVICE 2
669#define CONFIG_SATA1
670#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR
671#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
672#define CONFIG_SATA2
673#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR
674#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA
675
676#define CONFIG_LBA48
677#define CONFIG_CMD_SATA
678#define CONFIG_DOS_PARTITION
679#define CONFIG_CMD_EXT2
680#endif
681
682#ifdef CONFIG_FMAN_ENET
683#define CONFIG_MII /* MII PHY management */
684#define CONFIG_ETHPRIME "FM1@DTSEC1"
685#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
686#endif
687
688/*
689* USB
690*/
691#define CONFIG_CMD_USB
692#define CONFIG_USB_STORAGE
693#define CONFIG_USB_EHCI
694#define CONFIG_USB_EHCI_FSL
695#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
696#define CONFIG_CMD_EXT2
697#define CONFIG_HAS_FSL_DR_USB
698
699#define CONFIG_MMC
700
701#ifdef CONFIG_MMC
702#define CONFIG_FSL_ESDHC
703#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
704#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
705#define CONFIG_CMD_MMC
706#define CONFIG_GENERIC_MMC
707#define CONFIG_CMD_EXT2
708#define CONFIG_CMD_FAT
709#define CONFIG_DOS_PARTITION
Xiaobo Xie929dfdc2014-11-18 09:12:24 +0800710#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
Chunhe Lan0b2e13d2014-04-14 18:42:06 +0800711#endif
712
Ruchika Gupta737537e2014-10-15 11:35:31 +0530713/* Hash command with SHA acceleration supported in hardware */
714#ifdef CONFIG_FSL_CAAM
715#define CONFIG_CMD_HASH
716#define CONFIG_SHA_HW_ACCEL
717#endif
718
Chunhe Lan0b2e13d2014-04-14 18:42:06 +0800719#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
720
721#define __USB_PHY_TYPE utmi
722
723/*
724 * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be
725 * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way
726 * interleaving. It can be cacheline, page, bank, superbank.
727 * See doc/README.fsl-ddr for details.
728 */
Chunhe Lan1a344452014-05-07 10:56:18 +0800729#ifdef CONFIG_PPC_T4240
Chunhe Lan0b2e13d2014-04-14 18:42:06 +0800730#define CTRL_INTLV_PREFERED 3way_4KB
Chunhe Lan1a344452014-05-07 10:56:18 +0800731#else
732#define CTRL_INTLV_PREFERED cacheline
733#endif
Chunhe Lan0b2e13d2014-04-14 18:42:06 +0800734
735#define CONFIG_EXTRA_ENV_SETTINGS \
736 "hwconfig=fsl_ddr:" \
737 "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \
738 "bank_intlv=auto;" \
739 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
740 "netdev=eth0\0" \
741 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
742 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \
743 "tftpflash=tftpboot $loadaddr $uboot && " \
744 "protect off $ubootaddr +$filesize && " \
745 "erase $ubootaddr +$filesize && " \
746 "cp.b $loadaddr $ubootaddr $filesize && " \
747 "protect on $ubootaddr +$filesize && " \
748 "cmp.b $loadaddr $ubootaddr $filesize\0" \
749 "consoledev=ttyS0\0" \
750 "ramdiskaddr=2000000\0" \
751 "ramdiskfile=t4240rdb/ramdisk.uboot\0" \
752 "fdtaddr=c00000\0" \
753 "fdtfile=t4240rdb/t4240rdb.dtb\0" \
754 "bdev=sda3\0"
755
756#define CONFIG_HVBOOT \
757 "setenv bootargs config-addr=0x60000000; " \
758 "bootm 0x01000000 - 0x00f00000"
759
760#define CONFIG_LINUX \
761 "setenv bootargs root=/dev/ram rw " \
762 "console=$consoledev,$baudrate $othbootargs;" \
763 "setenv ramdiskaddr 0x02000000;" \
764 "setenv fdtaddr 0x00c00000;" \
765 "setenv loadaddr 0x1000000;" \
766 "bootm $loadaddr $ramdiskaddr $fdtaddr"
767
768#define CONFIG_HDBOOT \
769 "setenv bootargs root=/dev/$bdev rw " \
770 "console=$consoledev,$baudrate $othbootargs;" \
771 "tftp $loadaddr $bootfile;" \
772 "tftp $fdtaddr $fdtfile;" \
773 "bootm $loadaddr - $fdtaddr"
774
775#define CONFIG_NFSBOOTCOMMAND \
776 "setenv bootargs root=/dev/nfs rw " \
777 "nfsroot=$serverip:$rootpath " \
778 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
779 "console=$consoledev,$baudrate $othbootargs;" \
780 "tftp $loadaddr $bootfile;" \
781 "tftp $fdtaddr $fdtfile;" \
782 "bootm $loadaddr - $fdtaddr"
783
784#define CONFIG_RAMBOOTCOMMAND \
785 "setenv bootargs root=/dev/ram rw " \
786 "console=$consoledev,$baudrate $othbootargs;" \
787 "tftp $ramdiskaddr $ramdiskfile;" \
788 "tftp $loadaddr $bootfile;" \
789 "tftp $fdtaddr $fdtfile;" \
790 "bootm $loadaddr $ramdiskaddr $fdtaddr"
791
792#define CONFIG_BOOTCOMMAND CONFIG_LINUX
793
794#include <asm/fsl_secure_boot.h>
795
796#ifdef CONFIG_SECURE_BOOT
797/* Secure Boot target was not getting build for T4240 because of
798 * increased binary size. So the size is being reduced by removing USB
799 * which is anyways not used in Secure Environment.
800 */
801#undef CONFIG_CMD_USB
Ruchika Gupta789490b2014-10-07 15:48:46 +0530802#define CONFIG_CMD_BLOB
Chunhe Lan0b2e13d2014-04-14 18:42:06 +0800803#endif
804
805#endif /* __CONFIG_H */