blob: 1b346093b88dab334d57bebbb2a6a5de890ee5b7 [file] [log] [blame]
Jun Nie76ed1032019-05-08 14:38:35 +08001This document describes the instruction to build and flash ATF/OPTEE/U-Boot on
2pico-imx7d board. U-Boot is loaded as part of FIP image by ATF in this setup.
3The boot sequence is ATF -> OPTEE -> U-Boot -> Linux. U-Boot is in non-secure
4world in this case.
5
6- Build u-boot
Tom Rini2b41e192020-05-26 14:36:49 -04007 Set environment variable of CROSS_COMPILE for your toolchain
Jun Nie76ed1032019-05-08 14:38:35 +08008 $ make pico-imx7d_bl33_defconfig
9 $ make all
10
11- Download and build OPTEE
12 $ git clone git@github.com:OP-TEE/optee_os.git
13 $ make PLATFORM=imx PLATFORM_FLAVOR=mx7dpico_mbl CFG_BOOT_SECONDARY_REQUEST=y ARCH=arm
14
15- Download and build ATF
16 $ git clone https://git.linaro.org/landing-teams/working/mbl/arm-trusted-firmware.git -b linaro-imx7
17 $ make DEBUG=1 PLAT=picopi ARCH=aarch32 ARM_ARCH_MAJOR=7 \
18 CROSS_COMPILE=arm-linux-gnueabihf- LOG_LEVEL=50 V=1 \
19 CRASH_REPORTING=1 AARCH32_SP=optee all
20 Save file content in this link to file pico-imx7d.cfg:
21 http://git.linaro.org/landing-teams/working/mbl/u-boot.git/tree/board/technexion/pico-imx7d/pico-imx7d.cfg?h=linaro-imx
22 $ u-boot/tools/mkimage -n pico-imx7d.cfg -T imximage -e 0x9df00000 -d \
23 build/picopi/debug/bl2.bin bl2.imx
24
25- Create FIP image
26 Create a fiptool_images/ folder in ATF folder, copy u-boot.bin in u-boot
27folder and tee*.bin in optee out/arm-plat-imx/core/tee/ folder to
28fiptool_images. Run below command in ATF folder to generate FIP image.
29 $ make -C tools/fiptool/
30 $ tools/fiptool/fiptool create --tos-fw fiptool_images/tee-header_v2.bin \
31 --tos-fw-extra1 fiptool_images/tee-pager_v2.bin \
32 --tos-fw-extra2 fiptool_images/tee-pageable_v2.bin \
33 --nt-fw fiptool_images/u-boot.bin \
34 fip.bin
35
36- Burn the images to eMMC for test.
37 Run below command in atf folder:
38 $ dd if=build/picopi/debug/bl2.bin.imx of=/dev/disk/by-id/usb-<your device> bs=1024 seek=1;sync
39 $ dd if=fip.bin of=/dev/disk/by-id/usb-<your device> bs=1024 seek=1;sync
40
41- Test
42 Just boot up your board and wait for u-boot start up after ATF's log.
43 For booting Linux in FIT image, please reference the FIT files in
44 u-boot doc/uImage.FIT/ folder.