blob: 98b743b936446e2fc73ba0e3afccecc6140ab931 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001/* SPDX-License-Identifier: GPL-2.0+ */
Peng Fanf0ff57b2015-07-20 19:28:35 +08002/*
3 * Copyright (C) 2015 Freescale Semiconductor, Inc.
4 *
5 * Configuration settings for the Freescale i.MX6UL 14x14 EVK board.
Peng Fanf0ff57b2015-07-20 19:28:35 +08006 */
7#ifndef __MX6UL_14X14_EVK_CONFIG_H
8#define __MX6UL_14X14_EVK_CONFIG_H
9
Peng Fanf0ff57b2015-07-20 19:28:35 +080010#include <asm/arch/imx-regs.h>
11#include <linux/sizes.h>
Simon Glass1af3c7f2020-05-10 11:40:09 -060012#include <linux/stringify.h>
Peng Fanf0ff57b2015-07-20 19:28:35 +080013#include "mx6_common.h"
Stefano Babic552a8482017-06-29 10:16:06 +020014#include <asm/mach-imx/gpio.h>
Peng Fanf0ff57b2015-07-20 19:28:35 +080015
Simon Glass4e499292023-02-05 15:40:59 -070016#define is_mx6ul_9x9_evk() IS_ENABLED(CONFIG_TARGET_MX6UL_9X9_EVK)
Peng Fand9cbb262015-09-06 15:02:34 +080017
Tom Rini4db38662022-12-04 10:04:55 -050018#define CFG_MXC_UART_BASE UART1_BASE
Peng Fanf0ff57b2015-07-20 19:28:35 +080019
Peng Fanf0ff57b2015-07-20 19:28:35 +080020/* MMC Configs */
21#ifdef CONFIG_FSL_USDHC
Tom Rini6cc04542022-10-28 20:27:13 -040022#define CFG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
Peng Fanf0ff57b2015-07-20 19:28:35 +080023
24/* NAND pin conflicts with usdhc2 */
25#ifdef CONFIG_NAND_MXS
Tom Rini6cc04542022-10-28 20:27:13 -040026#define CFG_SYS_FSL_USDHC_NUM 1
Peng Fanf0ff57b2015-07-20 19:28:35 +080027#else
Tom Rini6cc04542022-10-28 20:27:13 -040028#define CFG_SYS_FSL_USDHC_NUM 2
Peng Fanf0ff57b2015-07-20 19:28:35 +080029#endif
30
Peng Fanf0ff57b2015-07-20 19:28:35 +080031#endif
32
Tom Rini0613c362022-12-04 10:03:50 -050033#define CFG_EXTRA_ENV_SETTINGS \
Peng Fanf0ff57b2015-07-20 19:28:35 +080034 "script=boot.scr\0" \
35 "image=zImage\0" \
36 "console=ttymxc0\0" \
37 "fdt_high=0xffffffff\0" \
38 "initrd_high=0xffffffff\0" \
Peng Fand9cbb262015-09-06 15:02:34 +080039 "fdt_file=undefined\0" \
Peng Fanf0ff57b2015-07-20 19:28:35 +080040 "fdt_addr=0x83000000\0" \
41 "boot_fdt=try\0" \
42 "ip_dyn=yes\0" \
Tom Rini72d81362021-08-23 10:25:30 -040043 "splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
Peng Fandf674902015-10-29 15:54:48 +080044 "videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
Peng Fanf0ff57b2015-07-20 19:28:35 +080045 "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
Tom Rinide35b8f2021-12-11 14:55:52 -050046 "mmcpart=1\0" \
Peng Fanadfaa422022-04-15 12:23:41 +080047 "mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
Peng Fanf0ff57b2015-07-20 19:28:35 +080048 "mmcautodetect=yes\0" \
49 "mmcargs=setenv bootargs console=${console},${baudrate} " \
50 "root=${mmcroot}\0" \
51 "loadbootscript=" \
52 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
53 "bootscript=echo Running bootscript from mmc ...; " \
54 "source\0" \
55 "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
56 "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
57 "mmcboot=echo Booting from mmc ...; " \
58 "run mmcargs; " \
59 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
60 "if run loadfdt; then " \
61 "bootz ${loadaddr} - ${fdt_addr}; " \
62 "else " \
63 "if test ${boot_fdt} = try; then " \
64 "bootz; " \
65 "else " \
66 "echo WARN: Cannot load the DT; " \
67 "fi; " \
68 "fi; " \
69 "else " \
70 "bootz; " \
71 "fi;\0" \
72 "netargs=setenv bootargs console=${console},${baudrate} " \
73 "root=/dev/nfs " \
74 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
75 "netboot=echo Booting from net ...; " \
76 "run netargs; " \
77 "if test ${ip_dyn} = yes; then " \
78 "setenv get_cmd dhcp; " \
79 "else " \
80 "setenv get_cmd tftp; " \
81 "fi; " \
82 "${get_cmd} ${image}; " \
83 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
84 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
85 "bootz ${loadaddr} - ${fdt_addr}; " \
86 "else " \
87 "if test ${boot_fdt} = try; then " \
88 "bootz; " \
89 "else " \
90 "echo WARN: Cannot load the DT; " \
91 "fi; " \
92 "fi; " \
93 "else " \
94 "bootz; " \
Peng Fand9cbb262015-09-06 15:02:34 +080095 "fi;\0" \
96 "findfdt="\
97 "if test $fdt_file = undefined; then " \
98 "if test $board_name = EVK && test $board_rev = 9X9; then " \
99 "setenv fdt_file imx6ul-9x9-evk.dtb; fi; " \
100 "if test $board_name = EVK && test $board_rev = 14X14; then " \
101 "setenv fdt_file imx6ul-14x14-evk.dtb; fi; " \
102 "if test $fdt_file = undefined; then " \
103 "echo WARNING: Could not determine dtb to use; fi; " \
104 "fi;\0" \
Peng Fanf0ff57b2015-07-20 19:28:35 +0800105
Peng Fanf0ff57b2015-07-20 19:28:35 +0800106/* Miscellaneous configurable options */
Peng Fanf0ff57b2015-07-20 19:28:35 +0800107
Peng Fanf0ff57b2015-07-20 19:28:35 +0800108/* Physical Memory Map */
Peng Fanf0ff57b2015-07-20 19:28:35 +0800109#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
110
Tom Riniaa6e94d2022-11-16 13:10:37 -0500111#define CFG_SYS_SDRAM_BASE PHYS_SDRAM
Tom Rini65cc0e22022-11-16 13:10:41 -0500112#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
113#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE
Peng Fanf0ff57b2015-07-20 19:28:35 +0800114
Masahiro Yamadae856bdc2017-02-11 22:43:54 +0900115/* environment organization */
Peng Fanf0ff57b2015-07-20 19:28:35 +0800116
Peng Fanf0ff57b2015-07-20 19:28:35 +0800117/* USB Configs */
Peng Fanf0ff57b2015-07-20 19:28:35 +0800118#ifdef CONFIG_CMD_USB
Tom Rinidd11fdc2022-12-04 10:04:56 -0500119#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
120#define CFG_MXC_USB_FLAGS 0
Peng Fanf0ff57b2015-07-20 19:28:35 +0800121#endif
122
Peng Fan0d4cdb52015-08-12 17:46:52 +0800123#ifdef CONFIG_CMD_NET
Tom Rini4daffb52022-12-04 10:03:52 -0500124#define CFG_FEC_ENET_DEV 1
Peng Fan0d4cdb52015-08-12 17:46:52 +0800125
Tom Rini4daffb52022-12-04 10:03:52 -0500126#if (CFG_FEC_ENET_DEV == 0)
Tom Rinifa760c32022-12-04 10:03:53 -0500127#define CFG_FEC_MXC_PHYADDR 0x2
Tom Rini4daffb52022-12-04 10:03:52 -0500128#elif (CFG_FEC_ENET_DEV == 1)
Tom Rinifa760c32022-12-04 10:03:53 -0500129#define CFG_FEC_MXC_PHYADDR 0x1
Peng Fan0d4cdb52015-08-12 17:46:52 +0800130#endif
Peng Fan0d4cdb52015-08-12 17:46:52 +0800131#endif
132
Peng Fandf674902015-10-29 15:54:48 +0800133#define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR
Peng Fandf674902015-10-29 15:54:48 +0800134
Peng Fanf0ff57b2015-07-20 19:28:35 +0800135#endif