Chin Liang See | d8c67dc | 2014-06-10 01:10:21 -0500 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2013 Altera Corporation <www.altera.com> |
| 3 | * |
| 4 | * SPDX-License-Identifier: GPL-2.0+ |
| 5 | */ |
| 6 | |
| 7 | #include <common.h> |
| 8 | #include <watchdog.h> |
| 9 | #include <asm/io.h> |
| 10 | #include <asm/utils.h> |
| 11 | |
| 12 | #define DW_WDT_CR 0x00 |
| 13 | #define DW_WDT_TORR 0x04 |
| 14 | #define DW_WDT_CRR 0x0C |
| 15 | |
| 16 | #define DW_WDT_CR_EN_OFFSET 0x00 |
| 17 | #define DW_WDT_CR_RMOD_OFFSET 0x01 |
| 18 | #define DW_WDT_CR_RMOD_VAL 0x00 |
| 19 | #define DW_WDT_CRR_RESTART_VAL 0x76 |
| 20 | |
| 21 | /* |
| 22 | * Set the watchdog time interval. |
| 23 | * Counter is 32 bit. |
| 24 | */ |
| 25 | static int designware_wdt_settimeout(unsigned int timeout) |
| 26 | { |
| 27 | signed int i; |
| 28 | |
| 29 | /* calculate the timeout range value */ |
| 30 | i = (log_2_n_round_up(timeout * CONFIG_DW_WDT_CLOCK_KHZ)) - 16; |
| 31 | if (i > 15) |
| 32 | i = 15; |
| 33 | if (i < 0) |
| 34 | i = 0; |
| 35 | |
| 36 | writel((i | (i << 4)), (CONFIG_DW_WDT_BASE + DW_WDT_TORR)); |
| 37 | return 0; |
| 38 | } |
| 39 | |
| 40 | static void designware_wdt_enable(void) |
| 41 | { |
| 42 | writel(((DW_WDT_CR_RMOD_VAL << DW_WDT_CR_RMOD_OFFSET) | |
| 43 | (0x1 << DW_WDT_CR_EN_OFFSET)), |
| 44 | (CONFIG_DW_WDT_BASE + DW_WDT_CR)); |
| 45 | } |
| 46 | |
| 47 | static unsigned int designware_wdt_is_enabled(void) |
| 48 | { |
| 49 | unsigned long val; |
| 50 | val = readl((CONFIG_DW_WDT_BASE + DW_WDT_CR)); |
| 51 | return val & 0x1; |
| 52 | } |
| 53 | |
| 54 | #if defined(CONFIG_HW_WATCHDOG) |
| 55 | void hw_watchdog_reset(void) |
| 56 | { |
| 57 | if (designware_wdt_is_enabled()) |
| 58 | /* restart the watchdog counter */ |
| 59 | writel(DW_WDT_CRR_RESTART_VAL, |
| 60 | (CONFIG_DW_WDT_BASE + DW_WDT_CRR)); |
| 61 | } |
| 62 | |
| 63 | void hw_watchdog_init(void) |
| 64 | { |
| 65 | /* reset to disable the watchdog */ |
| 66 | hw_watchdog_reset(); |
| 67 | /* set timer in miliseconds */ |
| 68 | designware_wdt_settimeout(CONFIG_HW_WATCHDOG_TIMEOUT_MS); |
| 69 | /* enable the watchdog */ |
| 70 | designware_wdt_enable(); |
| 71 | /* reset the watchdog */ |
| 72 | hw_watchdog_reset(); |
| 73 | } |
| 74 | #endif |