blob: 9697431b449638e0a88124be96d686a711211d0e [file] [log] [blame]
Tom Rini87694552013-08-09 11:22:17 -04001/*
2 * ti_am335x_common.h
3 *
4 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
5 *
6 * SPDX-License-Identifier: GPL-2.0+
7 *
8 * For more details, please see the technical documents listed at
9 * http://www.ti.com/product/am3359#technicaldocuments
10 */
11
12#ifndef __CONFIG_TI_AM335X_COMMON_H__
13#define __CONFIG_TI_AM335X_COMMON_H__
14
15#define CONFIG_AM33XX
Tom Rini87694552013-08-09 11:22:17 -040016#define CONFIG_ARCH_CPU_INIT
17#define CONFIG_SYS_CACHELINE_SIZE 64
18#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */
19#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */
Heiko Schocher16678eb2013-11-04 14:05:00 +010020#define CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
Tom Rini87694552013-08-09 11:22:17 -040021
Simon Glass1a44cd82014-10-22 21:37:14 -060022#ifndef CONFIG_SPL_BUILD
Simon Glass1a44cd82014-10-22 21:37:14 -060023# define CONFIG_OMAP_SERIAL
Simon Glass1a44cd82014-10-22 21:37:14 -060024#endif
25
Tom Rini87694552013-08-09 11:22:17 -040026#include <asm/arch/omap.h>
27
28/* NS16550 Configuration */
29#define CONFIG_SYS_NS16550
Simon Glass1a44cd82014-10-22 21:37:14 -060030#ifdef CONFIG_SPL_BUILD
Tom Rini87694552013-08-09 11:22:17 -040031#define CONFIG_SYS_NS16550_SERIAL
32#define CONFIG_SYS_NS16550_REG_SIZE (-4)
Simon Glass1a44cd82014-10-22 21:37:14 -060033#endif
Tom Rini87694552013-08-09 11:22:17 -040034#define CONFIG_SYS_NS16550_CLK 48000000
35
36/* Network defines. */
Tom Rini87694552013-08-09 11:22:17 -040037#define CONFIG_CMD_DHCP
Mugunthan V Na35ad512014-02-18 07:31:55 -050038#define CONFIG_CMD_MII
Tom Rinia7a06402013-08-20 08:53:46 -040039#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */
Tom Rini87694552013-08-09 11:22:17 -040040#define CONFIG_BOOTP_DNS2
41#define CONFIG_BOOTP_SEND_HOSTNAME
42#define CONFIG_BOOTP_GATEWAY
43#define CONFIG_BOOTP_SUBNETMASK
44#define CONFIG_NET_RETRY_COUNT 10
Tom Rinia7a06402013-08-20 08:53:46 -040045#define CONFIG_CMD_PING
46#define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */
47#define CONFIG_MII /* Required in net/eth.c */
Tom Rini87694552013-08-09 11:22:17 -040048
Tom Rinic27efde2013-08-20 08:53:43 -040049/*
Tom Rinia1c143f2013-08-28 09:00:30 -040050 * RTC related defines. To use bootcount you must set bootlimit in the
Tom Riniabcaa6e2013-11-08 13:53:14 -050051 * environment to a non-zero value and enable CONFIG_BOOTCOUNT_LIMIT
52 * in the board config.
Tom Rinia1c143f2013-08-28 09:00:30 -040053 */
Tom Rinia1c143f2013-08-28 09:00:30 -040054#define CONFIG_SYS_BOOTCOUNT_ADDR 0x44E3E000
55
Tom Rini68439182013-10-01 12:32:04 -040056/* Enable the HW watchdog, since we can use this with bootcount */
57#define CONFIG_HW_WATCHDOG
58#define CONFIG_OMAP_WATCHDOG
59
Tom Rinia1c143f2013-08-28 09:00:30 -040060/*
Tom Rinic27efde2013-08-20 08:53:43 -040061 * SPL related defines. The Public RAM memory map the ROM defines the
62 * area between 0x402F0400 and 0x4030B800 as a download area and
63 * 0x4030B800 to 0x4030CE00 as a public stack area. The ROM also
64 * supports X-MODEM loading via UART, and we leverage this and then use
65 * Y-MODEM to load u-boot.img, when booted over UART.
66 */
Tom Rini87694552013-08-09 11:22:17 -040067#define CONFIG_SPL_TEXT_BASE 0x402F0400
Tom Rinic27efde2013-08-20 08:53:43 -040068#define CONFIG_SPL_MAX_SIZE (0x4030B800 - CONFIG_SPL_TEXT_BASE)
Tom Rinid3289aa2014-04-03 07:52:53 -040069#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \
70 (128 << 20))
Tom Rini87694552013-08-09 11:22:17 -040071
Tom Rini68439182013-10-01 12:32:04 -040072/* Enable the watchdog inside of SPL */
73#define CONFIG_SPL_WATCHDOG_SUPPORT
74
Tom Rini87694552013-08-09 11:22:17 -040075/*
76 * Since SPL did pll and ddr initialization for us,
77 * we don't need to do it twice.
78 */
79#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_NOR_BOOT)
80#define CONFIG_SKIP_LOWLEVEL_INIT
81#endif
82
Tom Rini196311d2014-05-21 12:57:22 -040083/*
84 * When building U-Boot such that there is no previous loader
85 * we need to call board_early_init_f. This is taken care of in
86 * s_init when we have SPL used.
87 */
88#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && !defined(CONFIG_SPL)
89#define CONFIG_BOARD_EARLY_INIT_F
90#endif
91
Enric Balletbò i Serra70e71b62013-12-06 21:30:20 +010092#ifdef CONFIG_NAND
93#define CONFIG_SPL_NAND_AM33XX_BCH /* ELM support */
94#endif
95
Tom Rini87694552013-08-09 11:22:17 -040096/* Now bring in the rest of the common code. */
Nishanth Menon9a0f4002015-07-22 18:05:41 -050097#include <configs/ti_armv7_omap.h>
Tom Rini87694552013-08-09 11:22:17 -040098
99#endif /* __CONFIG_TI_AM335X_COMMON_H__ */