blob: b258da9e92bc1adef615a80aee318243bf16d5eb [file] [log] [blame]
Mike Rapoport36b4e2d2010-12-18 17:43:19 -05001/*
Nikita Kiryanov9fc376b2012-01-02 04:01:30 +00002 * (C) Copyright 2011 CompuLab, Ltd.
Mike Rapoport36b4e2d2010-12-18 17:43:19 -05003 * Mike Rapoport <mike@compulab.co.il>
Igor Grinbergdccd9a02011-04-18 17:48:31 -04004 * Igor Grinberg <grinberg@compulab.co.il>
Mike Rapoport36b4e2d2010-12-18 17:43:19 -05005 *
6 * Based on omap3_beagle.h
7 * (C) Copyright 2006-2008
8 * Texas Instruments.
9 * Richard Woodruff <r-woodruff2@ti.com>
10 * Syed Mohammed Khasim <x0khasim@ti.com>
11 *
Igor Grinbergb65a77a2011-04-18 17:55:21 -040012 * Configuration settings for the CompuLab CM-T35 and CM-T3730 boards
Mike Rapoport36b4e2d2010-12-18 17:43:19 -050013 *
14 * See file CREDITS for list of people who contributed to this
15 * project.
16 *
17 * This program is free software; you can redistribute it and/or
18 * modify it under the terms of the GNU General Public License as
19 * published by the Free Software Foundation; either version 2 of
20 * the License, or (at your option) any later version.
21 *
22 * This program is distributed in the hope that it will be useful,
23 * but WITHOUT ANY WARRANTY; without even the implied warranty of
24 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
25 * GNU General Public License for more details.
26 *
27 * You should have received a copy of the GNU General Public License
28 * along with this program; if not, write to the Free Software
Igor Grinbergdccd9a02011-04-18 17:48:31 -040029 * Foundation, Inc.
Mike Rapoport36b4e2d2010-12-18 17:43:19 -050030 */
31
32#ifndef __CONFIG_H
33#define __CONFIG_H
34
35/*
36 * High Level Configuration Options
37 */
Nikita Kiryanov9fc376b2012-01-02 04:01:30 +000038#define CONFIG_OMAP /* in a TI OMAP core */
39#define CONFIG_OMAP34XX /* which is a 34XX */
Marek Vasut308252a2012-07-21 05:02:23 +000040#define CONFIG_OMAP_GPIO
Nikita Kiryanov9fc376b2012-01-02 04:01:30 +000041#define CONFIG_CM_T3X /* working with CM-T35 and CM-T3730 */
Mike Rapoport36b4e2d2010-12-18 17:43:19 -050042
43#define CONFIG_SYS_TEXT_BASE 0x80008000
44
45#define CONFIG_SDRC /* The chip has SDRC controller */
46
47#include <asm/arch/cpu.h> /* get chip and board defs */
48#include <asm/arch/omap3.h>
49
50/*
51 * Display CPU and Board information
52 */
Nikita Kiryanov9fc376b2012-01-02 04:01:30 +000053#define CONFIG_DISPLAY_CPUINFO
54#define CONFIG_DISPLAY_BOARDINFO
Mike Rapoport36b4e2d2010-12-18 17:43:19 -050055
56/* Clock Defines */
57#define V_OSCK 26000000 /* Clock output from T2 */
58#define V_SCLK (V_OSCK >> 1)
59
Mike Rapoport36b4e2d2010-12-18 17:43:19 -050060#define CONFIG_MISC_INIT_R
61
62#define CONFIG_OF_LIBFDT 1
63/*
64 * The early kernel mapping on ARM currently only maps from the base of DRAM
65 * to the end of the kernel image. The kernel is loaded at DRAM base + 0x8000.
66 * The early kernel pagetable uses DRAM base + 0x4000 to DRAM base + 0x8000,
67 * so that leaves DRAM base to DRAM base + 0x4000 available.
68 */
69#define CONFIG_SYS_BOOTMAPSZ 0x4000
70
Nikita Kiryanov9fc376b2012-01-02 04:01:30 +000071#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
72#define CONFIG_SETUP_MEMORY_TAGS
73#define CONFIG_INITRD_TAG
74#define CONFIG_REVISION_TAG
Nikita Kiryanov82309252012-01-12 03:26:30 +000075#define CONFIG_SERIAL_TAG
Mike Rapoport36b4e2d2010-12-18 17:43:19 -050076
77/*
78 * Size of malloc() pool
79 */
Igor Grinberg390cdcd2012-05-24 04:01:21 +000080#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */
Nikita Kiryanov9fc376b2012-01-02 04:01:30 +000081 /* Sector */
82#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10))
Mike Rapoport36b4e2d2010-12-18 17:43:19 -050083
84/*
85 * Hardware drivers
86 */
87
88/*
89 * NS16550 Configuration
90 */
91#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
92
93#define CONFIG_SYS_NS16550
94#define CONFIG_SYS_NS16550_SERIAL
95#define CONFIG_SYS_NS16550_REG_SIZE (-4)
96#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
97
98/*
99 * select serial console configuration
100 */
101#define CONFIG_CONS_INDEX 3
102#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
103#define CONFIG_SERIAL3 3 /* UART3 */
104
105/* allow to overwrite serial and ethaddr */
106#define CONFIG_ENV_OVERWRITE
107#define CONFIG_BAUDRATE 115200
108#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
109 115200}
Nikita Kiryanov9fc376b2012-01-02 04:01:30 +0000110
111#define CONFIG_GENERIC_MMC
112#define CONFIG_MMC
113#define CONFIG_OMAP_HSMMC
114#define CONFIG_DOS_PARTITION
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500115
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500116/* USB */
Nikita Kiryanov9fc376b2012-01-02 04:01:30 +0000117#define CONFIG_USB_OMAP3
Nikita Kiryanov854a7832012-12-02 13:59:19 +0200118#define CONFIG_USB_EHCI
119#define CONFIG_USB_EHCI_OMAP
120#define CONFIG_USB_ULPI
121#define CONFIG_USB_ULPI_VIEWPORT_OMAP
122#define CONFIG_USB_STORAGE
123#define CONFIG_MUSB_UDC
Nikita Kiryanov9fc376b2012-01-02 04:01:30 +0000124#define CONFIG_TWL4030_USB
Nikita Kiryanov854a7832012-12-02 13:59:19 +0200125#define CONFIG_CMD_USB
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500126
127/* USB device configuration */
Nikita Kiryanov9fc376b2012-01-02 04:01:30 +0000128#define CONFIG_USB_DEVICE
129#define CONFIG_USB_TTY
130#define CONFIG_SYS_CONSOLE_IS_IN_ENV
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500131
132/* commands to include */
133#include <config_cmd_default.h>
134
135#define CONFIG_CMD_CACHE
136#define CONFIG_CMD_EXT2 /* EXT2 Support */
137#define CONFIG_CMD_FAT /* FAT support */
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500138#define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */
139#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
Igor Grinberg0b800a62013-04-22 01:06:55 +0000140#define CONFIG_MTD_PARTITIONS
Nikita Kiryanov9fc376b2012-01-02 04:01:30 +0000141#define MTDIDS_DEFAULT "nand0=nand"
142#define MTDPARTS_DEFAULT "mtdparts=nand:512k(x-loader),"\
Igor Grinberg0b800a62013-04-22 01:06:55 +0000143 "1920k(u-boot),256k(u-boot-env),"\
Nikita Kiryanov9fc376b2012-01-02 04:01:30 +0000144 "4m(kernel),-(fs)"
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500145
146#define CONFIG_CMD_I2C /* I2C serial bus support */
147#define CONFIG_CMD_MMC /* MMC support */
148#define CONFIG_CMD_NAND /* NAND support */
149#define CONFIG_CMD_DHCP
150#define CONFIG_CMD_PING
151
152#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
153#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
154#undef CONFIG_CMD_IMLS /* List all found images */
155
156#define CONFIG_SYS_NO_FLASH
Nikita Kiryanov9fc376b2012-01-02 04:01:30 +0000157#define CONFIG_HARD_I2C
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500158#define CONFIG_SYS_I2C_SPEED 100000
159#define CONFIG_SYS_I2C_SLAVE 1
Nikita Kiryanov9fc376b2012-01-02 04:01:30 +0000160#define CONFIG_DRIVER_OMAP34XX_I2C
Nikita Kiryanov82309252012-01-12 03:26:30 +0000161#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
162#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
Nikita Kiryanov79874ae2012-04-02 02:29:31 +0000163#define CONFIG_I2C_MULTI_BUS
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500164
165/*
166 * TWL4030
167 */
Nikita Kiryanov9fc376b2012-01-02 04:01:30 +0000168#define CONFIG_TWL4030_POWER
169#define CONFIG_TWL4030_LED
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500170
171/*
172 * Board NAND Info.
173 */
Nikita Kiryanov9fc376b2012-01-02 04:01:30 +0000174#define CONFIG_SYS_NAND_QUIET_TEST
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500175#define CONFIG_NAND_OMAP_GPMC
176#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
177 /* to access nand */
178#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
179 /* to access nand at */
180 /* CS0 */
Nikita Kiryanov816e3922012-07-02 02:27:59 +0000181#define GPMC_NAND_ECC_LP_x8_LAYOUT
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500182
183#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
184 /* devices */
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500185/* Environment information */
186#define CONFIG_BOOTDELAY 10
Nikita Kiryanov9bd5c1a2012-12-04 23:28:26 +0000187#define CONFIG_ZERO_BOOTDELAY_CHECK
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500188
189#define CONFIG_EXTRA_ENV_SETTINGS \
190 "loadaddr=0x82000000\0" \
191 "usbtty=cdc_acm\0" \
192 "console=ttyS2,115200n8\0" \
193 "mpurate=500\0" \
194 "vram=12M\0" \
195 "dvimode=1024x768MR-16@60\0" \
196 "defaultdisplay=dvi\0" \
197 "mmcdev=0\0" \
198 "mmcroot=/dev/mmcblk0p2 rw\0" \
Igor Grinberg0b800a62013-04-22 01:06:55 +0000199 "mmcrootfstype=ext4 rootwait\0" \
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500200 "nandroot=/dev/mtdblock4 rw\0" \
Igor Grinberg0b800a62013-04-22 01:06:55 +0000201 "nandrootfstype=ubifs\0" \
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500202 "mmcargs=setenv bootargs console=${console} " \
203 "mpurate=${mpurate} " \
204 "vram=${vram} " \
205 "omapfb.mode=dvi:${dvimode} " \
206 "omapfb.debug=y " \
207 "omapdss.def_disp=${defaultdisplay} " \
208 "root=${mmcroot} " \
209 "rootfstype=${mmcrootfstype}\0" \
210 "nandargs=setenv bootargs console=${console} " \
211 "mpurate=${mpurate} " \
212 "vram=${vram} " \
213 "omapfb.mode=dvi:${dvimode} " \
214 "omapfb.debug=y " \
215 "omapdss.def_disp=${defaultdisplay} " \
216 "root=${nandroot} " \
217 "rootfstype=${nandrootfstype}\0" \
218 "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
219 "bootscript=echo Running bootscript from mmc ...; " \
220 "source ${loadaddr}\0" \
221 "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
222 "mmcboot=echo Booting from mmc ...; " \
223 "run mmcargs; " \
224 "bootm ${loadaddr}\0" \
225 "nandboot=echo Booting from nand ...; " \
226 "run nandargs; " \
Igor Grinberg0b800a62013-04-22 01:06:55 +0000227 "nand read ${loadaddr} 2a0000 400000; " \
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500228 "bootm ${loadaddr}\0" \
229
230#define CONFIG_BOOTCOMMAND \
Andrew Bradford66968112012-10-01 05:06:52 +0000231 "mmc dev ${mmcdev}; if mmc rescan; then " \
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500232 "if run loadbootscript; then " \
233 "run bootscript; " \
234 "else " \
235 "if run loaduimage; then " \
236 "run mmcboot; " \
237 "else run nandboot; " \
238 "fi; " \
239 "fi; " \
240 "else run nandboot; fi"
241
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500242/*
243 * Miscellaneous configurable options
244 */
Igor Grinberg41d7e702011-04-18 17:48:28 -0400245#define CONFIG_AUTO_COMPLETE
246#define CONFIG_CMDLINE_EDITING
247#define CONFIG_TIMESTAMP
Nikita Kiryanov9fc376b2012-01-02 04:01:30 +0000248#define CONFIG_SYS_AUTOLOAD "no"
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500249#define CONFIG_SYS_LONGHELP /* undef to save memory */
250#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
Igor Grinbergb65a77a2011-04-18 17:55:21 -0400251#define CONFIG_SYS_PROMPT "CM-T3x # "
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500252#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
253/* Print Buffer Size */
254#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
255 sizeof(CONFIG_SYS_PROMPT) + 16)
256#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
257/* Boot Argument Buffer Size */
258#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
259
260#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) /* memtest */
261 /* works on */
262#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
263 0x01F00000) /* 31MB */
264
265#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default */
266 /* load address */
267
268/*
269 * OMAP3 has 12 GP timers, they can be driven by the system clock
270 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
271 * This rate is divided by a local divisor.
272 */
273#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
274#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
275#define CONFIG_SYS_HZ 1000
276
277/*-----------------------------------------------------------------------
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500278 * Physical Memory Map
279 */
280#define CONFIG_NR_DRAM_BANKS 1 /* CS1 is never populated */
281#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500282
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500283/*-----------------------------------------------------------------------
284 * FLASH and environment organization
285 */
286
287/* **** PISMO SUPPORT *** */
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500288/* Configure the PISMO */
289#define PISMO1_NAND_SIZE GPMC_SIZE_128M
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500290
291/* Monitor at start of flash */
292#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
Igor Grinberg3530a352012-10-07 01:17:34 +0000293#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500294
Nikita Kiryanov9fc376b2012-01-02 04:01:30 +0000295#define CONFIG_ENV_IS_IN_NAND
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500296#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */
Luca Ceresoli6cbec7b2011-04-20 11:02:05 -0400297#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500298#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET
299
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500300#if defined(CONFIG_CMD_NET)
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500301#define CONFIG_SMC911X
302#define CONFIG_SMC911X_32_BIT
Igor Grinbergb65a77a2011-04-18 17:55:21 -0400303#define CM_T3X_SMC911X_BASE 0x2C000000
304#define SB_T35_SMC911X_BASE (CM_T3X_SMC911X_BASE + (16 << 20))
305#define CONFIG_SMC911X_BASE CM_T3X_SMC911X_BASE
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500306#endif /* (CONFIG_CMD_NET) */
307
308/* additions for new relocation code, must be added to all boards */
309#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
310#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
311#define CONFIG_SYS_INIT_RAM_SIZE 0x800
312#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
313 CONFIG_SYS_INIT_RAM_SIZE - \
314 GENERATED_GBL_DATA_SIZE)
315
Igor Grinberg2b8754b2011-04-18 17:54:33 -0400316/* Status LED */
Nikita Kiryanov9fc376b2012-01-02 04:01:30 +0000317#define CONFIG_STATUS_LED /* Status LED enabled */
318#define CONFIG_BOARD_SPECIFIC_LED
Igor Grinberg2b8754b2011-04-18 17:54:33 -0400319#define STATUS_LED_GREEN 0
320#define STATUS_LED_BIT STATUS_LED_GREEN
321#define STATUS_LED_STATE STATUS_LED_ON
322#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
323#define STATUS_LED_BOOT STATUS_LED_BIT
324#define GREEN_LED_GPIO 186 /* CM-T35 Green LED is GPIO186 */
325
Nikita Kiryanov60e6bdc2013-02-24 06:19:23 +0000326#define CONFIG_SPLASHIMAGE_GUARD
327
Igor Grinberg2b8754b2011-04-18 17:54:33 -0400328/* GPIO banks */
329#ifdef CONFIG_STATUS_LED
Nikita Kiryanov9fc376b2012-01-02 04:01:30 +0000330#define CONFIG_OMAP3_GPIO_6 /* GPIO186 is in GPIO bank 6 */
Igor Grinberg2b8754b2011-04-18 17:54:33 -0400331#endif
332
Nikita Kiryanov7878ca52013-01-30 21:39:58 +0000333/* Display Configuration */
334#define CONFIG_OMAP3_GPIO_2
335#define CONFIG_VIDEO_OMAP3
336#define LCD_BPP LCD_COLOR16
337
338#define CONFIG_LCD
Nikita Kiryanovf35034f2012-12-22 21:03:48 +0000339#define CONFIG_SPLASH_SCREEN
340#define CONFIG_CMD_BMP
341#define CONFIG_BMP_16BPP
Nikita Kiryanov7878ca52013-01-30 21:39:58 +0000342
Mike Rapoport36b4e2d2010-12-18 17:43:19 -0500343#endif /* __CONFIG_H */