blob: 4c8e9e9819fa58975c932d7ae6c9209cd6f0a84a [file] [log] [blame]
Fabio Estevame2d282a2013-03-15 10:43:48 +00001/*
2 * Copyright (C) 2013 Freescale Semiconductor, Inc.
3 *
4 * Configuration settings for the Wandboard.
5 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02006 * SPDX-License-Identifier: GPL-2.0+
Fabio Estevame2d282a2013-03-15 10:43:48 +00007 */
8
9#ifndef __CONFIG_H
10#define __CONFIG_H
11
Stefano Babic3d99e862015-11-13 10:49:01 +010012#include <config_distro_defaults.h>
Eric Nelson02824dc2013-11-26 17:40:30 -070013#include "mx6_common.h"
Fabio Estevame2d282a2013-03-15 10:43:48 +000014
Fabio Estevam0d1ea052015-05-11 20:50:22 -030015#define CONFIG_SPL_LIBCOMMON_SUPPORT
16#define CONFIG_SPL_MMC_SUPPORT
17#include "imx6_spl.h"
18
Fabio Estevame2d282a2013-03-15 10:43:48 +000019#define MACH_TYPE_WANDBOARD 4412
20#define CONFIG_MACH_TYPE MACH_TYPE_WANDBOARD
21
Fabio Estevame2d282a2013-03-15 10:43:48 +000022/* Size of malloc() pool */
Fabio Estevam7bcb9832013-05-23 07:50:23 +000023#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
Fabio Estevame2d282a2013-03-15 10:43:48 +000024
25#define CONFIG_BOARD_EARLY_INIT_F
Otavio Salvadoreaffaa22013-04-19 03:42:03 +000026#define CONFIG_BOARD_LATE_INIT
Fabio Estevame2d282a2013-03-15 10:43:48 +000027
28#define CONFIG_MXC_UART
29#define CONFIG_MXC_UART_BASE UART1_BASE
30
Fabio Estevame2d282a2013-03-15 10:43:48 +000031/* Command definition */
Otavio Salvadoreaffaa22013-04-19 03:42:03 +000032#define CONFIG_CMD_BMODE
Otavio Salvador0798d572013-04-19 03:42:00 +000033
Fabio Estevame2d282a2013-03-15 10:43:48 +000034#define CONFIG_SYS_MEMTEST_START 0x10000000
35#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
Fabio Estevame2d282a2013-03-15 10:43:48 +000036
Otavio Salvador8bc7c482014-05-01 19:02:31 -030037/* I2C Configs */
38#define CONFIG_CMD_I2C
39#define CONFIG_SYS_I2C
40#define CONFIG_SYS_I2C_MXC
Albert ARIBAUD \\(3ADEV\\)03544c62015-09-21 22:43:38 +020041#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
42#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
York Sunf8cb1012015-03-20 10:20:40 -070043#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
Otavio Salvador8bc7c482014-05-01 19:02:31 -030044#define CONFIG_SYS_I2C_SPEED 100000
45
Fabio Estevame2d282a2013-03-15 10:43:48 +000046/* MMC Configuration */
Otavio Salvador5ed15732013-04-19 03:42:02 +000047#define CONFIG_SYS_FSL_USDHC_NUM 2
Fabio Estevame2d282a2013-03-15 10:43:48 +000048#define CONFIG_SYS_FSL_ESDHC_ADDR 0
Fabio Estevame2d282a2013-03-15 10:43:48 +000049
Jeroen Hofstee9df47572014-10-23 23:02:01 +020050/* USB Configs */
51#define CONFIG_CMD_USB
52#define CONFIG_USB_EHCI
53#define CONFIG_USB_EHCI_MX6
54#define CONFIG_USB_STORAGE
55#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
56#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
57#define CONFIG_MXC_USB_FLAGS 0
58
Fabio Estevame2d282a2013-03-15 10:43:48 +000059/* Ethernet Configuration */
60#define CONFIG_CMD_PING
61#define CONFIG_CMD_DHCP
62#define CONFIG_CMD_MII
Fabio Estevame2d282a2013-03-15 10:43:48 +000063#define CONFIG_FEC_MXC
64#define CONFIG_MII
65#define IMX_FEC_BASE ENET_BASE_ADDR
66#define CONFIG_FEC_XCV_TYPE RGMII
67#define CONFIG_ETHPRIME "FEC"
68#define CONFIG_FEC_MXC_PHYADDR 1
69#define CONFIG_PHYLIB
70#define CONFIG_PHY_ATHEROS
71
Fabio Estevam7bcb9832013-05-23 07:50:23 +000072/* Framebuffer */
73#define CONFIG_VIDEO
74#define CONFIG_VIDEO_IPUV3
75#define CONFIG_CFB_CONSOLE
76#define CONFIG_VGA_AS_SINGLE_DEVICE
77#define CONFIG_SYS_CONSOLE_IS_IN_ENV
78#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
79#define CONFIG_VIDEO_BMP_RLE8
80#define CONFIG_SPLASH_SCREEN
Otavio Salvadora7efb022013-05-27 12:18:44 +000081#define CONFIG_SPLASH_SCREEN_ALIGN
Fabio Estevam7bcb9832013-05-23 07:50:23 +000082#define CONFIG_BMP_16BPP
83#define CONFIG_VIDEO_LOGO
Otavio Salvadora7efb022013-05-27 12:18:44 +000084#define CONFIG_VIDEO_BMP_LOGO
Fabio Estevam7bcb9832013-05-23 07:50:23 +000085#define CONFIG_IPUV3_CLK 260000000
Otavio Salvador0ef797a2014-05-01 19:02:32 -030086#define CONFIG_CMD_HDMIDETECT
Pardeep Kumar Singla5ea7f0e2013-07-25 12:12:13 -050087#define CONFIG_IMX_HDMI
Otavio Salvador8bc7c482014-05-01 19:02:31 -030088#define CONFIG_IMX_VIDEO_SKIP
Fabio Estevam7bcb9832013-05-23 07:50:23 +000089
Fabio Estevam0d1ea052015-05-11 20:50:22 -030090#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
Fabio Estevame2d282a2013-03-15 10:43:48 +000091#define CONFIG_EXTRA_ENV_SETTINGS \
Vagrant Cascadianacc6bb52015-10-27 12:49:40 -070092 "console=ttymxc0,115200\0" \
Otavio Salvadord727ab32013-07-20 17:21:19 -030093 "splashpos=m,m\0" \
Fabio Estevam0d1ea052015-05-11 20:50:22 -030094 "fdtfile=undefined\0" \
Fabio Estevame2d282a2013-03-15 10:43:48 +000095 "fdt_high=0xffffffff\0" \
96 "initrd_high=0xffffffff\0" \
Vagrant Cascadianacc6bb52015-10-27 12:49:40 -070097 "fdt_addr_r=0x18000000\0" \
Otavio Salvador6584a1b2013-12-16 20:44:04 -020098 "fdt_addr=0x18000000\0" \
Fabio Estevame2d282a2013-03-15 10:43:48 +000099 "ip_dyn=yes\0" \
Otavio Salvador1e1cbde2013-04-19 03:41:59 +0000100 "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
Otavio Salvador0798d572013-04-19 03:42:00 +0000101 "update_sd_firmware_filename=u-boot.imx\0" \
102 "update_sd_firmware=" \
103 "if test ${ip_dyn} = yes; then " \
104 "setenv get_cmd dhcp; " \
105 "else " \
106 "setenv get_cmd tftp; " \
107 "fi; " \
108 "if mmc dev ${mmcdev}; then " \
109 "if ${get_cmd} ${update_sd_firmware_filename}; then " \
110 "setexpr fw_sz ${filesize} / 0x200; " \
111 "setexpr fw_sz ${fw_sz} + 1; " \
112 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
113 "fi; " \
114 "fi\0" \
Otavio Salvador0ef797a2014-05-01 19:02:32 -0300115 "videoargs=" \
116 "setenv nextcon 0; " \
117 "if hdmidet; then " \
118 "setenv bootargs ${bootargs} " \
119 "video=mxcfb${nextcon}:dev=hdmi,1280x720M@60," \
120 "if=RGB24; " \
121 "setenv fbmen fbmem=28M; " \
122 "setexpr nextcon ${nextcon} + 1; " \
123 "else " \
124 "echo - no HDMI monitor;" \
125 "fi; " \
126 "i2c dev 1; " \
127 "if i2c probe 0x10; then " \
128 "setenv bootargs ${bootargs} " \
129 "video=mxcfb${nextcon}:dev=lcd,800x480@60," \
Otavio Salvador99c618f2015-01-15 13:32:29 -0200130 "if=RGB666,bpp=32; " \
Otavio Salvador0ef797a2014-05-01 19:02:32 -0300131 "if test 0 -eq ${nextcon}; then " \
132 "setenv fbmem fbmem=10M; " \
133 "else " \
134 "setenv fbmem ${fbmem},10M; " \
135 "fi; " \
136 "setexpr nextcon ${nextcon} + 1; " \
137 "else " \
138 "echo '- no FWBADAPT-7WVGA-LCD-F07A-0102 display';" \
139 "fi; " \
140 "setenv bootargs ${bootargs} ${fbmem}\0" \
Fabio Estevam0d1ea052015-05-11 20:50:22 -0300141 "findfdt="\
Fabio Estevam9a8804a2015-05-21 19:24:05 -0300142 "if test $board_name = C1 && test $board_rev = MX6Q ; then " \
Fabio Estevam0d1ea052015-05-11 20:50:22 -0300143 "setenv fdtfile imx6q-wandboard.dtb; fi; " \
Fabio Estevam9a8804a2015-05-21 19:24:05 -0300144 "if test $board_name = C1 && test $board_rev = MX6DL ; then " \
Fabio Estevam0d1ea052015-05-11 20:50:22 -0300145 "setenv fdtfile imx6dl-wandboard.dtb; fi; " \
Fabio Estevam9a8804a2015-05-21 19:24:05 -0300146 "if test $board_name = B1 && test $board_rev = MX6Q ; then " \
147 "setenv fdtfile imx6q-wandboard-revb1.dtb; fi; " \
148 "if test $board_name = B1 && test $board_rev = MX6DL ; then " \
149 "setenv fdtfile imx6dl-wandboard-revb1.dtb; fi; " \
Fabio Estevam0d1ea052015-05-11 20:50:22 -0300150 "if test $fdtfile = undefined; then " \
151 "echo WARNING: Could not determine dtb to use; fi; \0" \
Vagrant Cascadianacc6bb52015-10-27 12:49:40 -0700152 "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
153 "pxe_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
154 "ramdisk_addr_r=0x13000000\0" \
155 "ramdiskaddr=0x13000000\0" \
156 "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
157 BOOTENV
158
159#define BOOT_TARGET_DEVICES(func) \
160 func(MMC, mmc, 0) \
161 func(MMC, mmc, 1) \
162 func(USB, usb, 0) \
163 func(PXE, pxe, na) \
164 func(DHCP, dhcp, na)
Fabio Estevame2d282a2013-03-15 10:43:48 +0000165
166#define CONFIG_BOOTCOMMAND \
Fabio Estevam0d1ea052015-05-11 20:50:22 -0300167 "run findfdt; " \
Vagrant Cascadianacc6bb52015-10-27 12:49:40 -0700168 "run distro_bootcmd"
169
Vagrant Cascadianacc6bb52015-10-27 12:49:40 -0700170#include <config_distro_bootcmd.h>
Fabio Estevame2d282a2013-03-15 10:43:48 +0000171
Fabio Estevame2d282a2013-03-15 10:43:48 +0000172/* Physical Memory Map */
173#define CONFIG_NR_DRAM_BANKS 1
174#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
175
176#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
177#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
178#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
179
180#define CONFIG_SYS_INIT_SP_OFFSET \
181 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
182#define CONFIG_SYS_INIT_SP_ADDR \
183 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
184
Peter Robinson056845c2015-05-22 17:30:45 +0100185/* Environment organization */
Fabio Estevame2d282a2013-03-15 10:43:48 +0000186#define CONFIG_ENV_SIZE (8 * 1024)
187
188#define CONFIG_ENV_IS_IN_MMC
189#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
190#define CONFIG_SYS_MMC_ENV_DEV 0
Fabio Estevame2d282a2013-03-15 10:43:48 +0000191
Fabio Estevame2d282a2013-03-15 10:43:48 +0000192#endif /* __CONFIG_H * */