blob: b1c51e72bf60e30408af73437c64d2f3be8cdd94 [file] [log] [blame]
Peng Fand0dd7392018-10-18 14:28:37 +02001/* SPDX-License-Identifier: GPL-2.0+ */
2/*
3 * Copyright 2018 NXP
4 */
5
6#ifndef __IMX8QXP_MEK_H
7#define __IMX8QXP_MEK_H
8
9#include <linux/sizes.h>
Simon Glass1af3c7f2020-05-10 11:40:09 -060010#include <linux/stringify.h>
Peng Fand0dd7392018-10-18 14:28:37 +020011#include <asm/arch/imx-regs.h>
12
Peng Fan018e3fd2018-12-21 06:21:34 +000013#ifdef CONFIG_SPL_BUILD
Peng Fan018e3fd2018-12-21 06:21:34 +000014#define CONFIG_SPL_MAX_SIZE (124 * 1024)
15#define CONFIG_SYS_MONITOR_LEN (1024 * 1024)
Peng Fan018e3fd2018-12-21 06:21:34 +000016
Peng Fan018e3fd2018-12-21 06:21:34 +000017#define CONFIG_SPL_STACK 0x013E000
18#define CONFIG_SPL_BSS_START_ADDR 0x00128000
19#define CONFIG_SPL_BSS_MAX_SIZE 0x1000 /* 4 KB */
20#define CONFIG_SYS_SPL_MALLOC_START 0x00120000
21#define CONFIG_SYS_SPL_MALLOC_SIZE 0x3000 /* 12 KB */
22#define CONFIG_SERIAL_LPUART_BASE 0x5a060000
Peng Fan018e3fd2018-12-21 06:21:34 +000023#define CONFIG_MALLOC_F_ADDR 0x00120000
24
25#define CONFIG_SPL_RAW_IMAGE_ARM_TRUSTED_FIRMWARE
26
27#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
Peng Fan018e3fd2018-12-21 06:21:34 +000028#endif
29
Peng Fand0dd7392018-10-18 14:28:37 +020030#define CONFIG_SYS_FSL_ESDHC_ADDR 0
31#define USDHC1_BASE_ADDR 0x5B010000
32#define USDHC2_BASE_ADDR 0x5B020000
Peng Fand0dd7392018-10-18 14:28:37 +020033
Peng Fan6dcc6ce2019-09-25 08:11:19 +000034#ifdef CONFIG_AHAB_BOOT
35#define AHAB_ENV "sec_boot=yes\0"
36#else
37#define AHAB_ENV "sec_boot=no\0"
38#endif
39
Peng Fand0dd7392018-10-18 14:28:37 +020040/* Initial environment variables */
41#define CONFIG_EXTRA_ENV_SETTINGS \
Peng Fan6dcc6ce2019-09-25 08:11:19 +000042 AHAB_ENV \
Peng Fand0dd7392018-10-18 14:28:37 +020043 "script=boot.scr\0" \
44 "image=Image\0" \
45 "panel=NULL\0" \
Fabio Estevam10a8cc02020-02-17 15:17:01 -030046 "console=ttyLP0\0" \
Peng Fand0dd7392018-10-18 14:28:37 +020047 "fdt_addr=0x83000000\0" \
48 "fdt_high=0xffffffffffffffff\0" \
49 "boot_fdt=try\0" \
Peng Fana6c36f12020-05-05 20:28:45 +080050 "fdt_file=undefined\0" \
Peng Fand0dd7392018-10-18 14:28:37 +020051 "initrd_addr=0x83800000\0" \
52 "initrd_high=0xffffffffffffffff\0" \
53 "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
Tom Rinide35b8f2021-12-11 14:55:52 -050054 "mmcpart=1\0" \
Peng Fand0dd7392018-10-18 14:28:37 +020055 "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
56 "mmcautodetect=yes\0" \
Fabio Estevam10a8cc02020-02-17 15:17:01 -030057 "mmcargs=setenv bootargs console=${console},${baudrate} root=${mmcroot}\0 " \
Peng Fand0dd7392018-10-18 14:28:37 +020058 "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
59 "bootscript=echo Running bootscript from mmc ...; " \
60 "source\0" \
61 "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
62 "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
Peng Fan6dcc6ce2019-09-25 08:11:19 +000063 "loadcntr=fatload mmc ${mmcdev}:${mmcpart} ${cntr_addr} ${cntr_file}\0" \
64 "auth_os=auth_cntr ${cntr_addr}\0" \
65 "boot_os=booti ${loadaddr} - ${fdt_addr};\0" \
Peng Fand0dd7392018-10-18 14:28:37 +020066 "mmcboot=echo Booting from mmc ...; " \
67 "run mmcargs; " \
Peng Fan6dcc6ce2019-09-25 08:11:19 +000068 "if test ${sec_boot} = yes; then " \
69 "if run auth_os; then " \
70 "run boot_os; " \
Peng Fand0dd7392018-10-18 14:28:37 +020071 "else " \
Peng Fan6dcc6ce2019-09-25 08:11:19 +000072 "echo ERR: failed to authenticate; " \
Peng Fand0dd7392018-10-18 14:28:37 +020073 "fi; " \
74 "else " \
Peng Fan6dcc6ce2019-09-25 08:11:19 +000075 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
76 "if run loadfdt; then " \
77 "run boot_os; " \
78 "else " \
79 "echo WARN: Cannot load the DT; " \
80 "fi; " \
81 "else " \
82 "echo wait for boot; " \
83 "fi;" \
Peng Fand0dd7392018-10-18 14:28:37 +020084 "fi;\0" \
Fabio Estevam10a8cc02020-02-17 15:17:01 -030085 "netargs=setenv bootargs console=${console},${baudrate} " \
Peng Fand0dd7392018-10-18 14:28:37 +020086 "root=/dev/nfs " \
87 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
88 "netboot=echo Booting from net ...; " \
89 "run netargs; " \
90 "if test ${ip_dyn} = yes; then " \
91 "setenv get_cmd dhcp; " \
92 "else " \
93 "setenv get_cmd tftp; " \
94 "fi; " \
Peng Fan6dcc6ce2019-09-25 08:11:19 +000095 "if test ${sec_boot} = yes; then " \
96 "${get_cmd} ${cntr_addr} ${cntr_file}; " \
97 "if run auth_os; then " \
98 "run boot_os; " \
Peng Fand0dd7392018-10-18 14:28:37 +020099 "else " \
Peng Fan6dcc6ce2019-09-25 08:11:19 +0000100 "echo ERR: failed to authenticate; " \
Peng Fand0dd7392018-10-18 14:28:37 +0200101 "fi; " \
102 "else " \
Peng Fan6dcc6ce2019-09-25 08:11:19 +0000103 "${get_cmd} ${loadaddr} ${image}; " \
104 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
105 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
106 "run boot_os; " \
107 "else " \
108 "echo WARN: Cannot load the DT; " \
109 "fi; " \
110 "else " \
111 "booti; " \
112 "fi;" \
Peng Fand0dd7392018-10-18 14:28:37 +0200113 "fi;\0"
114
Peng Fand0dd7392018-10-18 14:28:37 +0200115/* Link Definitions */
Peng Fand0dd7392018-10-18 14:28:37 +0200116
117#define CONFIG_SYS_INIT_SP_ADDR 0x80200000
118
119/* Default environment is in SD */
Peng Fand0dd7392018-10-18 14:28:37 +0200120
Peng Fand0dd7392018-10-18 14:28:37 +0200121/* On LPDDR4 board, USDHC1 is for eMMC, USDHC2 is for SD on CPU board */
Peng Fand0dd7392018-10-18 14:28:37 +0200122#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */
123#define CONFIG_SYS_FSL_USDHC_NUM 2
124
Peng Fand0dd7392018-10-18 14:28:37 +0200125#define CONFIG_SYS_SDRAM_BASE 0x80000000
126#define PHYS_SDRAM_1 0x80000000
127#define PHYS_SDRAM_2 0x880000000
128#define PHYS_SDRAM_1_SIZE 0x80000000 /* 2 GB */
129/* LPDDR4 board total DDR is 3GB */
130#define PHYS_SDRAM_2_SIZE 0x40000000 /* 1 GB */
131
Peng Fand0dd7392018-10-18 14:28:37 +0200132/* Generic Timer Definitions */
133#define COUNTER_FREQUENCY 8000000 /* 8MHz */
134
135#ifndef CONFIG_DM_PCA953X
136#define CONFIG_PCA953X
Peng Fand0dd7392018-10-18 14:28:37 +0200137#endif
138
139/* Networking */
140#define CONFIG_FEC_XCV_TYPE RGMII
Peng Fand0dd7392018-10-18 14:28:37 +0200141
Anatolij Gustschin5c1c7c12019-10-21 17:31:53 +0200142/* Misc configuration */
143#define CONFIG_SYS_CBSIZE 2048
144#define CONFIG_SYS_MAXARGS 64
145#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
146
Peng Fand0dd7392018-10-18 14:28:37 +0200147#endif /* __IMX8QXP_MEK_H */