Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 9b6f157e19ef4bdc0d75b387ec7500c4c275beed / . / arch / arm / dts / k3-j7200.dtsi
blob: 126c31bac722622b195615ddc7f6c751b1ee6ea9 [file] [log] [blame]
Lokesh Vutlaa7551cf2020-08-05 22:44:28 +0530[diff] [blame]1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Device Tree Source for J7200 SoC Family
4 *
5 * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
6 */
7
8#include <dt-bindings/interrupt-controller/irq.h>
9#include <dt-bindings/interrupt-controller/arm-gic.h>
10#include <dt-bindings/pinctrl/k3.h>
11#include <dt-bindings/soc/ti,sci_pm_domain.h>
12
13/ {
14 model = "Texas Instruments K3 J7200 SoC";
15 compatible = "ti,j7200";
16 interrupt-parent = <&gic500>;
17 #address-cells = <2>;
18 #size-cells = <2>;
19
20 aliases {
21 serial0 = &wkup_uart0;
22 serial1 = &mcu_uart0;
23 serial2 = &main_uart0;
24 serial3 = &main_uart1;
25 serial4 = &main_uart2;
26 serial5 = &main_uart3;
27 serial6 = &main_uart4;
28 serial7 = &main_uart5;
29 serial8 = &main_uart6;
30 serial9 = &main_uart7;
31 serial10 = &main_uart8;
32 serial11 = &main_uart9;
33 i2c0 = &wkup_i2c0;
34 i2c1 = &mcu_i2c0;
35 i2c2 = &mcu_i2c1;
36 i2c3 = &main_i2c0;
37 i2c4 = &main_i2c1;
38 i2c5 = &main_i2c2;
39 i2c6 = &main_i2c3;
40 i2c7 = &main_i2c4;
41 i2c8 = &main_i2c5;
42 i2c9 = &main_i2c6;
43 };
44
45 cpus {
46 #address-cells = <1>;
47 #size-cells = <0>;
48 cpu-map {
49 cluster0: cluster0 {
50 core0 {
51 cpu = <&cpu0>;
52 };
53
54 core1 {
55 cpu = <&cpu1>;
56 };
57 };
58
59 };
60
61 cpu0: cpu@0 {
62 compatible = "arm,cortex-a72";
63 reg = <0x000>;
64 device_type = "cpu";
65 enable-method = "psci";
66 i-cache-size = <0xC000>;
67 i-cache-line-size = <64>;
68 i-cache-sets = <256>;
69 d-cache-size = <0x8000>;
70 d-cache-line-size = <64>;
71 d-cache-sets = <128>;
72 next-level-cache = <&L2_0>;
73 };
74
75 cpu1: cpu@1 {
76 compatible = "arm,cortex-a72";
77 reg = <0x001>;
78 device_type = "cpu";
79 enable-method = "psci";
80 i-cache-size = <0xC000>;
81 i-cache-line-size = <64>;
82 i-cache-sets = <256>;
83 d-cache-size = <0x8000>;
84 d-cache-line-size = <64>;
85 d-cache-sets = <128>;
86 next-level-cache = <&L2_0>;
87 };
88 };
89
90 L2_0: l2-cache0 {
91 compatible = "cache";
92 cache-level = <2>;
93 cache-size = <0x100000>;
94 cache-line-size = <64>;
95 cache-sets = <2048>;
96 next-level-cache = <&msmc_l3>;
97 };
98
99 msmc_l3: l3-cache0 {
100 compatible = "cache";
101 cache-level = <3>;
102 };
103
104 firmware {
105 optee {
106 compatible = "linaro,optee-tz";
107 method = "smc";
108 };
109
110 psci: psci {
111 compatible = "arm,psci-1.0";
112 method = "smc";
113 };
114 };
115
116 a72_timer0: timer-cl0-cpu0 {
117 compatible = "arm,armv8-timer";
118 interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
119 <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
120 <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
121 <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
122 };
123
124 pmu: pmu {
125 compatible = "arm,armv8-pmuv3";
126 interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
127 };
128
129 cbass_main: bus@100000 {
130 compatible = "simple-bus";
131 #address-cells = <2>;
132 #size-cells = <2>;
133 ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
134 <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
135 <0x00 0x00A40000 0x00 0x00A40000 0x00 0x00000800>, /* timesync router */
136 <0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */
137 <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */
138 <0x00 0x70000000 0x00 0x70000000 0x00 0x00800000>, /* MSMC RAM */
139 <0x41 0x00000000 0x41 0x00000000 0x01 0x00000000>, /* PCIe1 DAT */
140
141 /* MCUSS_WKUP Range */
142 <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
143 <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>,
144 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>,
145 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>,
146 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>,
147 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>,
148 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
149 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
150 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
151 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
Vignesh Raghavendra28e29fb2020-08-07 00:26:59 +0530[diff] [blame]152 <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>,
153 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>;
Lokesh Vutlaa7551cf2020-08-05 22:44:28 +0530[diff] [blame]154
155 cbass_mcu_wakeup: bus@28380000 {
156 compatible = "simple-bus";
157 #address-cells = <2>;
158 #size-cells = <2>;
159 ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/
160 <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, /* First peripheral window */
161 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
162 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */
163 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */
164 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, /* MCU SRAM */
165 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP peripheral window */
166 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
167 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
168 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */
Vignesh Raghavendra28e29fb2020-08-07 00:26:59 +0530[diff] [blame]169 <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS OSPI0/1 data region 0 */
170 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>; /* FSS OSPI0 data region 3 */
Lokesh Vutlaa7551cf2020-08-05 22:44:28 +0530[diff] [blame]171 };
172 };
173};
174
175/* Now include the peripherals for each bus segments */
176#include "k3-j7200-main.dtsi"
177#include "k3-j7200-mcu-wakeup.dtsi"