| Wenyou Yang | 110fa97 | 2017-03-24 09:18:41 +0800 | [diff] [blame] | 1 | /* |
| 2 | * sama5d3xcm_cmp.dtsi - Device Tree Include file for SAMA5D36 CMP CPU Module |
| 3 | * |
| 4 | * Copyright (C) 2016 Atmel, |
| 5 | * |
| 6 | * Licensed under GPLv2 or later. |
| 7 | */ |
| 8 | |
| 9 | / { |
| 10 | compatible = "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5"; |
| 11 | |
| 12 | chosen { |
| 13 | bootargs = "rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs"; |
| 14 | stdout-path = "serial0:115200n8"; |
| 15 | }; |
| 16 | |
| 17 | memory { |
| 18 | reg = <0x20000000 0x20000000>; |
| 19 | }; |
| 20 | |
| 21 | clocks { |
| 22 | slow_xtal { |
| 23 | clock-frequency = <32768>; |
| 24 | }; |
| 25 | |
| 26 | main_xtal { |
| 27 | clock-frequency = <12000000>; |
| 28 | }; |
| 29 | }; |
| 30 | |
| 31 | ahb { |
| 32 | apb { |
| 33 | spi0: spi@f0004000 { |
| 34 | cs-gpios = <&pioD 13 0>, <0>, <0>, <0>; |
| 35 | }; |
| 36 | |
| 37 | macb0: ethernet@f0028000 { |
| 38 | phy-mode = "rgmii"; |
| 39 | #address-cells = <1>; |
| 40 | #size-cells = <0>; |
| 41 | |
| 42 | ethernet-phy@1 { |
| 43 | reg = <0x1>; |
| 44 | interrupt-parent = <&pioB>; |
| 45 | interrupts = <25 IRQ_TYPE_EDGE_FALLING>; |
| James Byrne | 83f71ef | 2019-03-04 17:40:33 +0000 | [diff] [blame] | 46 | txen-skew-ps = <480>; |
| 47 | txc-skew-ps = <1800>; |
| 48 | rxdv-skew-ps = <240>; |
| 49 | rxc-skew-ps = <1800>; |
| 50 | rxd0-skew-ps = <240>; |
| 51 | rxd1-skew-ps = <240>; |
| 52 | rxd2-skew-ps = <240>; |
| 53 | rxd3-skew-ps = <240>; |
| Wenyou Yang | 110fa97 | 2017-03-24 09:18:41 +0800 | [diff] [blame] | 54 | }; |
| 55 | |
| 56 | ethernet-phy@7 { |
| 57 | reg = <0x7>; |
| 58 | interrupt-parent = <&pioB>; |
| 59 | interrupts = <25 IRQ_TYPE_EDGE_FALLING>; |
| James Byrne | 83f71ef | 2019-03-04 17:40:33 +0000 | [diff] [blame] | 60 | txen-skew-ps = <480>; |
| 61 | txc-skew-ps = <1800>; |
| 62 | rxdv-skew-ps = <240>; |
| 63 | rxc-skew-ps = <1800>; |
| 64 | rxd0-skew-ps = <240>; |
| 65 | rxd1-skew-ps = <240>; |
| 66 | rxd2-skew-ps = <240>; |
| 67 | rxd3-skew-ps = <240>; |
| Wenyou Yang | 110fa97 | 2017-03-24 09:18:41 +0800 | [diff] [blame] | 68 | }; |
| 69 | }; |
| 70 | |
| 71 | i2c1: i2c@f0018000 { |
| 72 | pmic: act8865@5b { |
| 73 | compatible = "active-semi,act8865"; |
| 74 | reg = <0x5b>; |
| 75 | status = "disabled"; |
| 76 | |
| 77 | regulators { |
| 78 | vcc_1v8_reg: DCDC_REG1 { |
| 79 | regulator-name = "VCC_1V8"; |
| 80 | regulator-min-microvolt = <1800000>; |
| 81 | regulator-max-microvolt = <1800000>; |
| 82 | regulator-always-on; |
| 83 | }; |
| 84 | |
| 85 | vcc_1v2_reg: DCDC_REG2 { |
| 86 | regulator-name = "VCC_1V2"; |
| 87 | regulator-min-microvolt = <1100000>; |
| 88 | regulator-max-microvolt = <1300000>; |
| 89 | regulator-always-on; |
| 90 | }; |
| 91 | |
| 92 | vcc_3v3_reg: DCDC_REG3 { |
| 93 | regulator-name = "VCC_3V3"; |
| 94 | regulator-min-microvolt = <3300000>; |
| 95 | regulator-max-microvolt = <3300000>; |
| 96 | regulator-always-on; |
| 97 | }; |
| 98 | |
| 99 | vddana_reg: LDO_REG1 { |
| 100 | regulator-name = "VDDANA"; |
| 101 | regulator-min-microvolt = <3300000>; |
| 102 | regulator-max-microvolt = <3300000>; |
| 103 | regulator-always-on; |
| 104 | }; |
| 105 | |
| 106 | vddfuse_reg: LDO_REG2 { |
| 107 | regulator-name = "FUSE_2V5"; |
| 108 | regulator-min-microvolt = <2500000>; |
| 109 | regulator-max-microvolt = <2500000>; |
| 110 | }; |
| 111 | }; |
| 112 | }; |
| 113 | }; |
| 114 | }; |
| 115 | |
| 116 | nand0: nand@60000000 { |
| 117 | nand-bus-width = <8>; |
| 118 | nand-ecc-mode = "hw"; |
| 119 | atmel,has-pmecc; |
| 120 | atmel,pmecc-cap = <4>; |
| 121 | atmel,pmecc-sector-size = <512>; |
| 122 | nand-on-flash-bbt; |
| 123 | status = "okay"; |
| 124 | |
| 125 | at91bootstrap@0 { |
| 126 | label = "at91bootstrap"; |
| 127 | reg = <0x0 0x40000>; |
| 128 | }; |
| 129 | |
| 130 | bootloader@40000 { |
| 131 | label = "bootloader"; |
| 132 | reg = <0x40000 0x80000>; |
| 133 | }; |
| 134 | |
| 135 | bootloaderenv@c0000 { |
| 136 | label = "bootloader env"; |
| 137 | reg = <0xc0000 0xc0000>; |
| 138 | }; |
| 139 | |
| 140 | dtb@180000 { |
| 141 | label = "device tree"; |
| 142 | reg = <0x180000 0x80000>; |
| 143 | }; |
| 144 | |
| 145 | kernel@200000 { |
| 146 | label = "kernel"; |
| 147 | reg = <0x200000 0x600000>; |
| 148 | }; |
| 149 | |
| 150 | rootfs@800000 { |
| 151 | label = "rootfs"; |
| 152 | reg = <0x800000 0x0f800000>; |
| 153 | }; |
| 154 | }; |
| 155 | }; |
| 156 | |
| 157 | leds { |
| 158 | compatible = "gpio-leds"; |
| 159 | |
| 160 | d2 { |
| 161 | label = "d2"; |
| 162 | gpios = <&pioE 25 GPIO_ACTIVE_LOW>; /* PE25, conflicts with A25, RXD2 */ |
| 163 | linux,default-trigger = "heartbeat"; |
| 164 | }; |
| 165 | }; |
| 166 | }; |