| Chen-Yu Tsai | b5fe523 | 2020-01-12 23:36:13 +0800 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
| 2 | /* |
| 3 | * DTS for Emlid Neutis N5 Dev board. |
| 4 | * |
| 5 | * Copyright (C) 2019 Georgii Staroselskii <georgiii.staroselskii@emlid.com> |
| 6 | */ |
| 7 | |
| 8 | /dts-v1/; |
| 9 | |
| 10 | #include "sun8i-h3-emlid-neutis-n5h3.dtsi" |
| 11 | |
| 12 | / { |
| 13 | model = "Emlid Neutis N5H3 Developer board"; |
| 14 | compatible = "emlid,neutis-n5h3-devboard", |
| 15 | "emlid,neutis-n5h3", |
| 16 | "allwinner,sun8i-h3"; |
| 17 | |
| 18 | vdd_cpux: gpio-regulator { |
| 19 | compatible = "regulator-gpio"; |
| 20 | regulator-name = "vdd-cpux"; |
| 21 | regulator-type = "voltage"; |
| 22 | regulator-boot-on; |
| 23 | regulator-always-on; |
| 24 | regulator-min-microvolt = <1100000>; |
| 25 | regulator-max-microvolt = <1300000>; |
| 26 | regulator-ramp-delay = <50>; /* 4ms */ |
| 27 | gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ |
| 28 | gpios-states = <0x1>; |
| 29 | states = <1100000 0x0>, <1300000 0x1>; |
| 30 | }; |
| 31 | |
| 32 | connector { |
| 33 | compatible = "hdmi-connector"; |
| 34 | type = "a"; |
| 35 | |
| 36 | port { |
| 37 | hdmi_con_in: endpoint { |
| 38 | remote-endpoint = <&hdmi_out_con>; |
| 39 | }; |
| 40 | }; |
| 41 | }; |
| 42 | |
| 43 | }; |
| 44 | |
| 45 | &cpu0 { |
| 46 | cpu-supply = <&vdd_cpux>; |
| 47 | }; |
| 48 | |
| 49 | &codec { |
| 50 | status = "okay"; |
| 51 | }; |
| 52 | |
| 53 | &emac { |
| 54 | phy-handle = <&int_mii_phy>; |
| 55 | phy-mode = "mii"; |
| 56 | allwinner,leds-active-low; |
| 57 | status = "okay"; |
| 58 | }; |
| 59 | |
| 60 | &hdmi { |
| 61 | status = "okay"; |
| 62 | }; |
| 63 | |
| 64 | &hdmi_out { |
| 65 | hdmi_out_con: endpoint { |
| 66 | remote-endpoint = <&hdmi_con_in>; |
| 67 | }; |
| 68 | }; |
| 69 | |
| 70 | &i2c1 { |
| 71 | status = "okay"; |
| 72 | }; |