Srinath Mannam | 4848704 | 2020-05-12 13:29:50 +0530 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
| 2 | /* |
Bharat Gooty | 2cb3260 | 2021-08-23 14:57:24 +0530 | [diff] [blame] | 3 | * Copyright (C) 2020-2021 Broadcom |
Srinath Mannam | 4848704 | 2020-05-12 13:29:50 +0530 | [diff] [blame] | 4 | * |
| 5 | */ |
| 6 | |
| 7 | #include <common.h> |
| 8 | #include <dm.h> |
| 9 | #include <errno.h> |
| 10 | #include <generic-phy.h> |
| 11 | #include <pci.h> |
| 12 | #include <malloc.h> |
| 13 | #include <asm/io.h> |
| 14 | #include <dm/device_compat.h> |
Bharat Gooty | 2cb3260 | 2021-08-23 14:57:24 +0530 | [diff] [blame] | 15 | #include <linux/delay.h> |
Srinath Mannam | 4848704 | 2020-05-12 13:29:50 +0530 | [diff] [blame] | 16 | #include <linux/log2.h> |
| 17 | |
| 18 | #define EP_PERST_SOURCE_SELECT_SHIFT 2 |
| 19 | #define EP_PERST_SOURCE_SELECT BIT(EP_PERST_SOURCE_SELECT_SHIFT) |
| 20 | #define EP_MODE_SURVIVE_PERST_SHIFT 1 |
| 21 | #define EP_MODE_SURVIVE_PERST BIT(EP_MODE_SURVIVE_PERST_SHIFT) |
| 22 | #define RC_PCIE_RST_OUTPUT_SHIFT 0 |
| 23 | #define RC_PCIE_RST_OUTPUT BIT(RC_PCIE_RST_OUTPUT_SHIFT) |
| 24 | |
| 25 | #define CFG_IND_ADDR_MASK 0x00001ffc |
| 26 | |
Pali Rohár | 3264b61 | 2021-11-24 18:00:32 +0100 | [diff] [blame] | 27 | #define CFG_ADDR_CFG_ECAM_MASK 0xfffffffc |
Srinath Mannam | 4848704 | 2020-05-12 13:29:50 +0530 | [diff] [blame] | 28 | #define CFG_ADDR_CFG_TYPE_MASK 0x00000003 |
| 29 | |
| 30 | #define IPROC_PCI_PM_CAP 0x48 |
| 31 | #define IPROC_PCI_PM_CAP_MASK 0xffff |
| 32 | #define IPROC_PCI_EXP_CAP 0xac |
| 33 | |
| 34 | #define IPROC_PCIE_REG_INVALID 0xffff |
| 35 | |
| 36 | #define PCI_EXP_TYPE_ROOT_PORT 0x4 /* Root Port */ |
| 37 | #define PCI_EXP_RTCTL 28 /* Root Control */ |
| 38 | /* CRS Software Visibility capability */ |
| 39 | #define PCI_EXP_RTCAP_CRSVIS 0x0001 |
| 40 | |
| 41 | #define PCI_EXP_LNKSTA 18 /* Link Status */ |
| 42 | #define PCI_EXP_LNKSTA_NLW 0x03f0 /* Negotiated Link Width */ |
| 43 | |
| 44 | #define PCIE_PHYLINKUP_SHIFT 3 |
| 45 | #define PCIE_PHYLINKUP BIT(PCIE_PHYLINKUP_SHIFT) |
| 46 | #define PCIE_DL_ACTIVE_SHIFT 2 |
| 47 | #define PCIE_DL_ACTIVE BIT(PCIE_DL_ACTIVE_SHIFT) |
| 48 | |
| 49 | /* derive the enum index of the outbound/inbound mapping registers */ |
| 50 | #define MAP_REG(base_reg, index) ((base_reg) + (index) * 2) |
| 51 | |
| 52 | /* |
| 53 | * Maximum number of outbound mapping window sizes that can be supported by any |
| 54 | * OARR/OMAP mapping pair |
| 55 | */ |
| 56 | #define MAX_NUM_OB_WINDOW_SIZES 4 |
| 57 | |
| 58 | #define OARR_VALID_SHIFT 0 |
| 59 | #define OARR_VALID BIT(OARR_VALID_SHIFT) |
| 60 | #define OARR_SIZE_CFG_SHIFT 1 |
| 61 | |
| 62 | /* |
| 63 | * Maximum number of inbound mapping region sizes that can be supported by an |
| 64 | * IARR |
| 65 | */ |
| 66 | #define MAX_NUM_IB_REGION_SIZES 9 |
| 67 | |
| 68 | #define IMAP_VALID_SHIFT 0 |
| 69 | #define IMAP_VALID BIT(IMAP_VALID_SHIFT) |
| 70 | |
| 71 | #define APB_ERR_EN_SHIFT 0 |
| 72 | #define APB_ERR_EN BIT(APB_ERR_EN_SHIFT) |
| 73 | |
| 74 | /** |
| 75 | * iProc PCIe host registers |
| 76 | */ |
| 77 | enum iproc_pcie_reg { |
| 78 | /* clock/reset signal control */ |
| 79 | IPROC_PCIE_CLK_CTRL = 0, |
| 80 | |
| 81 | /* |
| 82 | * To allow MSI to be steered to an external MSI controller (e.g., ARM |
| 83 | * GICv3 ITS) |
| 84 | */ |
| 85 | IPROC_PCIE_MSI_GIC_MODE, |
| 86 | |
| 87 | /* |
| 88 | * IPROC_PCIE_MSI_BASE_ADDR and IPROC_PCIE_MSI_WINDOW_SIZE define the |
| 89 | * window where the MSI posted writes are written, for the writes to be |
| 90 | * interpreted as MSI writes. |
| 91 | */ |
| 92 | IPROC_PCIE_MSI_BASE_ADDR, |
| 93 | IPROC_PCIE_MSI_WINDOW_SIZE, |
| 94 | |
| 95 | /* |
| 96 | * To hold the address of the register where the MSI writes are |
| 97 | * programed. When ARM GICv3 ITS is used, this should be programmed |
| 98 | * with the address of the GITS_TRANSLATER register. |
| 99 | */ |
| 100 | IPROC_PCIE_MSI_ADDR_LO, |
| 101 | IPROC_PCIE_MSI_ADDR_HI, |
| 102 | |
| 103 | /* enable MSI */ |
| 104 | IPROC_PCIE_MSI_EN_CFG, |
| 105 | |
| 106 | /* allow access to root complex configuration space */ |
| 107 | IPROC_PCIE_CFG_IND_ADDR, |
| 108 | IPROC_PCIE_CFG_IND_DATA, |
| 109 | |
| 110 | /* allow access to device configuration space */ |
| 111 | IPROC_PCIE_CFG_ADDR, |
| 112 | IPROC_PCIE_CFG_DATA, |
| 113 | |
| 114 | /* enable INTx */ |
| 115 | IPROC_PCIE_INTX_EN, |
| 116 | IPROC_PCIE_INTX_CSR, |
| 117 | |
| 118 | /* outbound address mapping */ |
| 119 | IPROC_PCIE_OARR0, |
| 120 | IPROC_PCIE_OMAP0, |
| 121 | IPROC_PCIE_OARR1, |
| 122 | IPROC_PCIE_OMAP1, |
| 123 | IPROC_PCIE_OARR2, |
| 124 | IPROC_PCIE_OMAP2, |
| 125 | IPROC_PCIE_OARR3, |
| 126 | IPROC_PCIE_OMAP3, |
| 127 | |
| 128 | /* inbound address mapping */ |
| 129 | IPROC_PCIE_IARR0, |
| 130 | IPROC_PCIE_IMAP0, |
| 131 | IPROC_PCIE_IARR1, |
| 132 | IPROC_PCIE_IMAP1, |
| 133 | IPROC_PCIE_IARR2, |
| 134 | IPROC_PCIE_IMAP2, |
| 135 | IPROC_PCIE_IARR3, |
| 136 | IPROC_PCIE_IMAP3, |
| 137 | IPROC_PCIE_IARR4, |
| 138 | IPROC_PCIE_IMAP4, |
| 139 | |
| 140 | /* config read status */ |
| 141 | IPROC_PCIE_CFG_RD_STATUS, |
| 142 | |
| 143 | /* link status */ |
| 144 | IPROC_PCIE_LINK_STATUS, |
| 145 | |
| 146 | /* enable APB error for unsupported requests */ |
| 147 | IPROC_PCIE_APB_ERR_EN, |
| 148 | |
| 149 | /* Ordering Mode configuration registers */ |
| 150 | IPROC_PCIE_ORDERING_CFG, |
| 151 | IPROC_PCIE_IMAP0_RO_CONTROL, |
| 152 | IPROC_PCIE_IMAP1_RO_CONTROL, |
| 153 | IPROC_PCIE_IMAP2_RO_CONTROL, |
| 154 | IPROC_PCIE_IMAP3_RO_CONTROL, |
| 155 | IPROC_PCIE_IMAP4_RO_CONTROL, |
| 156 | |
| 157 | /* total number of core registers */ |
| 158 | IPROC_PCIE_MAX_NUM_REG, |
| 159 | }; |
| 160 | |
| 161 | /* iProc PCIe PAXB v2 registers */ |
| 162 | static const u16 iproc_pcie_reg_paxb_v2[] = { |
| 163 | [IPROC_PCIE_CLK_CTRL] = 0x000, |
| 164 | [IPROC_PCIE_CFG_IND_ADDR] = 0x120, |
| 165 | [IPROC_PCIE_CFG_IND_DATA] = 0x124, |
| 166 | [IPROC_PCIE_CFG_ADDR] = 0x1f8, |
| 167 | [IPROC_PCIE_CFG_DATA] = 0x1fc, |
| 168 | [IPROC_PCIE_INTX_EN] = 0x330, |
| 169 | [IPROC_PCIE_INTX_CSR] = 0x334, |
| 170 | [IPROC_PCIE_OARR0] = 0xd20, |
| 171 | [IPROC_PCIE_OMAP0] = 0xd40, |
| 172 | [IPROC_PCIE_OARR1] = 0xd28, |
| 173 | [IPROC_PCIE_OMAP1] = 0xd48, |
| 174 | [IPROC_PCIE_OARR2] = 0xd60, |
| 175 | [IPROC_PCIE_OMAP2] = 0xd68, |
| 176 | [IPROC_PCIE_OARR3] = 0xdf0, |
| 177 | [IPROC_PCIE_OMAP3] = 0xdf8, |
| 178 | [IPROC_PCIE_IARR0] = 0xd00, |
| 179 | [IPROC_PCIE_IMAP0] = 0xc00, |
| 180 | [IPROC_PCIE_IARR2] = 0xd10, |
| 181 | [IPROC_PCIE_IMAP2] = 0xcc0, |
| 182 | [IPROC_PCIE_IARR3] = 0xe00, |
| 183 | [IPROC_PCIE_IMAP3] = 0xe08, |
| 184 | [IPROC_PCIE_IARR4] = 0xe68, |
| 185 | [IPROC_PCIE_IMAP4] = 0xe70, |
| 186 | [IPROC_PCIE_CFG_RD_STATUS] = 0xee0, |
| 187 | [IPROC_PCIE_LINK_STATUS] = 0xf0c, |
| 188 | [IPROC_PCIE_APB_ERR_EN] = 0xf40, |
| 189 | [IPROC_PCIE_ORDERING_CFG] = 0x2000, |
| 190 | [IPROC_PCIE_IMAP0_RO_CONTROL] = 0x201c, |
| 191 | [IPROC_PCIE_IMAP1_RO_CONTROL] = 0x2020, |
| 192 | [IPROC_PCIE_IMAP2_RO_CONTROL] = 0x2024, |
| 193 | [IPROC_PCIE_IMAP3_RO_CONTROL] = 0x2028, |
| 194 | [IPROC_PCIE_IMAP4_RO_CONTROL] = 0x202c, |
| 195 | }; |
| 196 | |
| 197 | /* iProc PCIe PAXC v2 registers */ |
| 198 | static const u16 iproc_pcie_reg_paxc_v2[] = { |
| 199 | [IPROC_PCIE_MSI_GIC_MODE] = 0x050, |
| 200 | [IPROC_PCIE_MSI_BASE_ADDR] = 0x074, |
| 201 | [IPROC_PCIE_MSI_WINDOW_SIZE] = 0x078, |
| 202 | [IPROC_PCIE_MSI_ADDR_LO] = 0x07c, |
| 203 | [IPROC_PCIE_MSI_ADDR_HI] = 0x080, |
| 204 | [IPROC_PCIE_MSI_EN_CFG] = 0x09c, |
| 205 | [IPROC_PCIE_CFG_IND_ADDR] = 0x1f0, |
| 206 | [IPROC_PCIE_CFG_IND_DATA] = 0x1f4, |
| 207 | [IPROC_PCIE_CFG_ADDR] = 0x1f8, |
| 208 | [IPROC_PCIE_CFG_DATA] = 0x1fc, |
| 209 | }; |
| 210 | |
| 211 | /** |
| 212 | * List of device IDs of controllers that have corrupted |
| 213 | * capability list that require SW fixup |
| 214 | */ |
| 215 | static const u16 iproc_pcie_corrupt_cap_did[] = { |
| 216 | 0x16cd, |
| 217 | 0x16f0, |
| 218 | 0xd802, |
| 219 | 0xd804 |
| 220 | }; |
| 221 | |
| 222 | enum iproc_pcie_type { |
| 223 | IPROC_PCIE_PAXB_V2, |
| 224 | IPROC_PCIE_PAXC, |
| 225 | IPROC_PCIE_PAXC_V2, |
| 226 | }; |
| 227 | |
| 228 | /** |
| 229 | * struct iproc_pcie_ob - iProc PCIe outbound mapping |
| 230 | * |
| 231 | * @axi_offset: offset from the AXI address to the internal address used by |
| 232 | * the iProc PCIe core |
| 233 | * @nr_windows: total number of supported outbound mapping windows |
| 234 | */ |
| 235 | struct iproc_pcie_ob { |
| 236 | resource_size_t axi_offset; |
| 237 | unsigned int nr_windows; |
| 238 | }; |
| 239 | |
| 240 | /** |
| 241 | * struct iproc_pcie_ib - iProc PCIe inbound mapping |
| 242 | * |
| 243 | * @nr_regions: total number of supported inbound mapping regions |
| 244 | */ |
| 245 | struct iproc_pcie_ib { |
| 246 | unsigned int nr_regions; |
| 247 | }; |
| 248 | |
| 249 | /** |
| 250 | * struct iproc_pcie_ob_map - outbound mapping controller specific parameters |
| 251 | * |
| 252 | * @window_sizes: list of supported outbound mapping window sizes in MB |
| 253 | * @nr_sizes: number of supported outbound mapping window sizes |
| 254 | */ |
| 255 | struct iproc_pcie_ob_map { |
| 256 | resource_size_t window_sizes[MAX_NUM_OB_WINDOW_SIZES]; |
| 257 | unsigned int nr_sizes; |
| 258 | }; |
| 259 | |
| 260 | static const struct iproc_pcie_ob_map paxb_v2_ob_map[] = { |
| 261 | { |
| 262 | /* OARR0/OMAP0 */ |
| 263 | .window_sizes = { 128, 256 }, |
| 264 | .nr_sizes = 2, |
| 265 | }, |
| 266 | { |
| 267 | /* OARR1/OMAP1 */ |
| 268 | .window_sizes = { 128, 256 }, |
| 269 | .nr_sizes = 2, |
| 270 | }, |
| 271 | { |
| 272 | /* OARR2/OMAP2 */ |
| 273 | .window_sizes = { 128, 256, 512, 1024 }, |
| 274 | .nr_sizes = 4, |
| 275 | }, |
| 276 | { |
| 277 | /* OARR3/OMAP3 */ |
| 278 | .window_sizes = { 128, 256, 512, 1024 }, |
| 279 | .nr_sizes = 4, |
| 280 | }, |
| 281 | }; |
| 282 | |
| 283 | /** |
| 284 | * iProc PCIe inbound mapping type |
| 285 | */ |
| 286 | enum iproc_pcie_ib_map_type { |
| 287 | /* for DDR memory */ |
| 288 | IPROC_PCIE_IB_MAP_MEM = 0, |
| 289 | |
| 290 | /* for device I/O memory */ |
| 291 | IPROC_PCIE_IB_MAP_IO, |
| 292 | |
| 293 | /* invalid or unused */ |
| 294 | IPROC_PCIE_IB_MAP_INVALID |
| 295 | }; |
| 296 | |
| 297 | /** |
| 298 | * struct iproc_pcie_ib_map - inbound mapping controller specific parameters |
| 299 | * |
| 300 | * @type: inbound mapping region type |
| 301 | * @size_unit: inbound mapping region size unit, could be SZ_1K, SZ_1M, or SZ_1G |
| 302 | * @region_sizes: list of supported inbound mapping region sizes in KB, MB, or |
| 303 | * GB, depedning on the size unit |
| 304 | * @nr_sizes: number of supported inbound mapping region sizes |
| 305 | * @nr_windows: number of supported inbound mapping windows for the region |
| 306 | * @imap_addr_offset: register offset between the upper and lower 32-bit |
| 307 | * IMAP address registers |
| 308 | * @imap_window_offset: register offset between each IMAP window |
| 309 | */ |
| 310 | struct iproc_pcie_ib_map { |
| 311 | enum iproc_pcie_ib_map_type type; |
| 312 | unsigned int size_unit; |
| 313 | resource_size_t region_sizes[MAX_NUM_IB_REGION_SIZES]; |
| 314 | unsigned int nr_sizes; |
| 315 | unsigned int nr_windows; |
| 316 | u16 imap_addr_offset; |
| 317 | u16 imap_window_offset; |
| 318 | }; |
| 319 | |
| 320 | static const struct iproc_pcie_ib_map paxb_v2_ib_map[] = { |
| 321 | { |
| 322 | /* IARR0/IMAP0 */ |
| 323 | .type = IPROC_PCIE_IB_MAP_IO, |
| 324 | .size_unit = SZ_1K, |
| 325 | .region_sizes = { 32 }, |
| 326 | .nr_sizes = 1, |
| 327 | .nr_windows = 8, |
| 328 | .imap_addr_offset = 0x40, |
| 329 | .imap_window_offset = 0x4, |
| 330 | }, |
| 331 | { |
| 332 | /* IARR1/IMAP1 (currently unused) */ |
| 333 | .type = IPROC_PCIE_IB_MAP_INVALID, |
| 334 | }, |
| 335 | { |
| 336 | /* IARR2/IMAP2 */ |
| 337 | .type = IPROC_PCIE_IB_MAP_MEM, |
| 338 | .size_unit = SZ_1M, |
| 339 | .region_sizes = { 64, 128, 256, 512, 1024, 2048, 4096, 8192, |
| 340 | 16384 }, |
| 341 | .nr_sizes = 9, |
| 342 | .nr_windows = 1, |
| 343 | .imap_addr_offset = 0x4, |
| 344 | .imap_window_offset = 0x8, |
| 345 | }, |
| 346 | { |
| 347 | /* IARR3/IMAP3 */ |
| 348 | .type = IPROC_PCIE_IB_MAP_MEM, |
| 349 | .size_unit = SZ_1G, |
| 350 | .region_sizes = { 1, 2, 4, 8, 16, 32 }, |
| 351 | .nr_sizes = 6, |
| 352 | .nr_windows = 8, |
| 353 | .imap_addr_offset = 0x4, |
| 354 | .imap_window_offset = 0x8, |
| 355 | }, |
| 356 | { |
| 357 | /* IARR4/IMAP4 */ |
| 358 | .type = IPROC_PCIE_IB_MAP_MEM, |
| 359 | .size_unit = SZ_1G, |
| 360 | .region_sizes = { 32, 64, 128, 256, 512 }, |
| 361 | .nr_sizes = 5, |
| 362 | .nr_windows = 8, |
| 363 | .imap_addr_offset = 0x4, |
| 364 | .imap_window_offset = 0x8, |
| 365 | }, |
| 366 | }; |
| 367 | |
| 368 | /** |
| 369 | * struct iproc_pcie - iproc pcie device instance |
| 370 | * |
| 371 | * @dev: pointer to pcie udevice |
| 372 | * @base: device I/O base address |
| 373 | * @type: pci device type, PAXC or PAXB |
| 374 | * @reg_offsets: pointer to pcie host register |
| 375 | * @fix_paxc_cap: paxc capability |
| 376 | * @need_ob_cfg: outbound mapping status |
| 377 | * @ob: pcie outbound mapping |
| 378 | * @ob_map: pointer to outbound mapping parameters |
| 379 | * @need_ib_cfg: inbound mapping status |
| 380 | * @ib: pcie inbound mapping |
| 381 | * @ib_map: pointer to inbound mapping parameters |
| 382 | * @ep_is_internal: ep status |
| 383 | * @phy: phy device |
| 384 | * @link_is_active: link up status |
| 385 | * @has_apb_err_disable: apb error status |
| 386 | */ |
| 387 | struct iproc_pcie { |
| 388 | struct udevice *dev; |
| 389 | void __iomem *base; |
| 390 | enum iproc_pcie_type type; |
| 391 | u16 *reg_offsets; |
| 392 | bool fix_paxc_cap; |
| 393 | bool need_ob_cfg; |
| 394 | struct iproc_pcie_ob ob; |
| 395 | const struct iproc_pcie_ob_map *ob_map; |
| 396 | bool need_ib_cfg; |
| 397 | struct iproc_pcie_ib ib; |
| 398 | const struct iproc_pcie_ib_map *ib_map; |
| 399 | bool ep_is_internal; |
| 400 | struct phy phy; |
| 401 | bool link_is_active; |
| 402 | bool has_apb_err_disable; |
| 403 | }; |
| 404 | |
| 405 | static inline bool iproc_pcie_reg_is_invalid(u16 reg_offset) |
| 406 | { |
| 407 | return !!(reg_offset == IPROC_PCIE_REG_INVALID); |
| 408 | } |
| 409 | |
| 410 | static inline u16 iproc_pcie_reg_offset(struct iproc_pcie *pcie, |
| 411 | enum iproc_pcie_reg reg) |
| 412 | { |
| 413 | return pcie->reg_offsets[reg]; |
| 414 | } |
| 415 | |
| 416 | static inline u32 iproc_pcie_read_reg(struct iproc_pcie *pcie, |
| 417 | enum iproc_pcie_reg reg) |
| 418 | { |
| 419 | u16 offset = iproc_pcie_reg_offset(pcie, reg); |
| 420 | |
| 421 | if (iproc_pcie_reg_is_invalid(offset)) |
| 422 | return 0; |
| 423 | |
| 424 | return readl(pcie->base + offset); |
| 425 | } |
| 426 | |
| 427 | static inline void iproc_pcie_write_reg(struct iproc_pcie *pcie, |
| 428 | enum iproc_pcie_reg reg, u32 val) |
| 429 | { |
| 430 | u16 offset = iproc_pcie_reg_offset(pcie, reg); |
| 431 | |
| 432 | if (iproc_pcie_reg_is_invalid(offset)) |
| 433 | return; |
| 434 | |
| 435 | writel(val, pcie->base + offset); |
| 436 | } |
| 437 | |
| 438 | static int iproc_pcie_map_ep_cfg_reg(const struct udevice *udev, pci_dev_t bdf, |
| 439 | uint where, void **paddress) |
| 440 | { |
| 441 | struct iproc_pcie *pcie = dev_get_priv(udev); |
| 442 | unsigned int busno = PCI_BUS(bdf); |
| 443 | unsigned int slot = PCI_DEV(bdf); |
| 444 | unsigned int fn = PCI_FUNC(bdf); |
| 445 | |
| 446 | u16 offset; |
| 447 | u32 val; |
| 448 | |
| 449 | /* root complex access */ |
| 450 | if (busno == 0) { |
| 451 | if (slot > 0 || fn > 0) |
| 452 | return -ENODEV; |
| 453 | |
| 454 | iproc_pcie_write_reg(pcie, IPROC_PCIE_CFG_IND_ADDR, |
| 455 | where & CFG_IND_ADDR_MASK); |
| 456 | offset = iproc_pcie_reg_offset(pcie, IPROC_PCIE_CFG_IND_DATA); |
| 457 | if (iproc_pcie_reg_is_invalid(offset)) |
| 458 | return -ENODEV; |
| 459 | |
| 460 | *paddress = (pcie->base + offset); |
| 461 | return 0; |
| 462 | } |
| 463 | |
| 464 | if (!pcie->link_is_active) |
| 465 | return -ENODEV; |
| 466 | |
| 467 | /* EP device access */ |
Pali Rohár | 3264b61 | 2021-11-24 18:00:32 +0100 | [diff] [blame] | 468 | val = (PCIE_ECAM_OFFSET(busno, slot, fn, where) & CFG_ADDR_CFG_ECAM_MASK) |
| 469 | | (1 & CFG_ADDR_CFG_TYPE_MASK); |
Srinath Mannam | 4848704 | 2020-05-12 13:29:50 +0530 | [diff] [blame] | 470 | |
| 471 | iproc_pcie_write_reg(pcie, IPROC_PCIE_CFG_ADDR, val); |
| 472 | offset = iproc_pcie_reg_offset(pcie, IPROC_PCIE_CFG_DATA); |
| 473 | |
| 474 | if (iproc_pcie_reg_is_invalid(offset)) |
| 475 | return -ENODEV; |
| 476 | |
| 477 | *paddress = (pcie->base + offset); |
| 478 | |
| 479 | return 0; |
| 480 | } |
| 481 | |
| 482 | static void iproc_pcie_fix_cap(struct iproc_pcie *pcie, int where, ulong *val) |
| 483 | { |
| 484 | u32 i, dev_id; |
| 485 | |
| 486 | switch (where & ~0x3) { |
| 487 | case PCI_VENDOR_ID: |
| 488 | dev_id = *val >> 16; |
| 489 | |
| 490 | /* |
| 491 | * Activate fixup for those controllers that have corrupted |
| 492 | * capability list registers |
| 493 | */ |
| 494 | for (i = 0; i < ARRAY_SIZE(iproc_pcie_corrupt_cap_did); i++) |
| 495 | if (dev_id == iproc_pcie_corrupt_cap_did[i]) |
| 496 | pcie->fix_paxc_cap = true; |
| 497 | break; |
| 498 | |
| 499 | case IPROC_PCI_PM_CAP: |
| 500 | if (pcie->fix_paxc_cap) { |
| 501 | /* advertise PM, force next capability to PCIe */ |
| 502 | *val &= ~IPROC_PCI_PM_CAP_MASK; |
| 503 | *val |= IPROC_PCI_EXP_CAP << 8 | PCI_CAP_ID_PM; |
| 504 | } |
| 505 | break; |
| 506 | |
| 507 | case IPROC_PCI_EXP_CAP: |
| 508 | if (pcie->fix_paxc_cap) { |
| 509 | /* advertise root port, version 2, terminate here */ |
| 510 | *val = (PCI_EXP_TYPE_ROOT_PORT << 4 | 2) << 16 | |
| 511 | PCI_CAP_ID_EXP; |
| 512 | } |
| 513 | break; |
| 514 | |
| 515 | case IPROC_PCI_EXP_CAP + PCI_EXP_RTCTL: |
| 516 | /* Don't advertise CRS SV support */ |
| 517 | *val &= ~(PCI_EXP_RTCAP_CRSVIS << 16); |
| 518 | break; |
| 519 | |
| 520 | default: |
| 521 | break; |
| 522 | } |
| 523 | } |
| 524 | |
| 525 | static int iproc_pci_raw_config_read32(struct iproc_pcie *pcie, |
| 526 | unsigned int devfn, int where, |
| 527 | int size, u32 *val) |
| 528 | { |
| 529 | void __iomem *addr; |
| 530 | int ret; |
| 531 | |
| 532 | ret = iproc_pcie_map_ep_cfg_reg(pcie->dev, devfn, where & ~0x3, &addr); |
| 533 | if (ret) { |
| 534 | *val = ~0; |
| 535 | return -EINVAL; |
| 536 | } |
| 537 | |
| 538 | *val = readl(addr); |
| 539 | |
| 540 | if (size <= 2) |
| 541 | *val = (*val >> (8 * (where & 3))) & ((1 << (size * 8)) - 1); |
| 542 | |
| 543 | return 0; |
| 544 | } |
| 545 | |
| 546 | static int iproc_pci_raw_config_write32(struct iproc_pcie *pcie, |
| 547 | unsigned int devfn, int where, |
| 548 | int size, u32 val) |
| 549 | { |
| 550 | void __iomem *addr; |
| 551 | int ret; |
| 552 | u32 mask, tmp; |
| 553 | |
| 554 | ret = iproc_pcie_map_ep_cfg_reg(pcie->dev, devfn, where & ~0x3, &addr); |
| 555 | if (ret) |
| 556 | return -EINVAL; |
| 557 | |
| 558 | if (size == 4) { |
| 559 | writel(val, addr); |
| 560 | return 0; |
| 561 | } |
| 562 | |
| 563 | mask = ~(((1 << (size * 8)) - 1) << ((where & 0x3) * 8)); |
| 564 | tmp = readl(addr) & mask; |
| 565 | tmp |= val << ((where & 0x3) * 8); |
| 566 | writel(tmp, addr); |
| 567 | return 0; |
| 568 | } |
| 569 | |
| 570 | /** |
| 571 | * iproc_pcie_apb_err_disable() - configure apb error |
| 572 | * |
| 573 | * APB error forwarding can be disabled during access of configuration |
| 574 | * registers of the endpoint device, to prevent unsupported requests |
| 575 | * (typically seen during enumeration with multi-function devices) from |
| 576 | * triggering a system exception. |
| 577 | * |
| 578 | * @bus: pcie udevice |
| 579 | * @bdf: pdf value |
| 580 | * @disabled: flag to enable/disabled apb error |
| 581 | */ |
| 582 | static inline void iproc_pcie_apb_err_disable(const struct udevice *bus, |
| 583 | pci_dev_t bdf, bool disable) |
| 584 | { |
| 585 | struct iproc_pcie *pcie = dev_get_priv(bus); |
| 586 | u32 val; |
| 587 | |
| 588 | if (PCI_BUS(bdf) && pcie->has_apb_err_disable) { |
| 589 | val = iproc_pcie_read_reg(pcie, IPROC_PCIE_APB_ERR_EN); |
| 590 | if (disable) |
| 591 | val &= ~APB_ERR_EN; |
| 592 | else |
| 593 | val |= APB_ERR_EN; |
| 594 | iproc_pcie_write_reg(pcie, IPROC_PCIE_APB_ERR_EN, val); |
| 595 | } |
| 596 | } |
| 597 | |
| 598 | static int iproc_pcie_config_read32(const struct udevice *bus, pci_dev_t bdf, |
| 599 | uint offset, ulong *valuep, |
| 600 | enum pci_size_t size) |
| 601 | { |
| 602 | struct iproc_pcie *pcie = dev_get_priv(bus); |
| 603 | int ret; |
| 604 | ulong data; |
| 605 | |
| 606 | iproc_pcie_apb_err_disable(bus, bdf, true); |
| 607 | ret = pci_generic_mmap_read_config(bus, iproc_pcie_map_ep_cfg_reg, |
| 608 | bdf, offset, &data, PCI_SIZE_32); |
| 609 | iproc_pcie_apb_err_disable(bus, bdf, false); |
| 610 | if (size <= PCI_SIZE_16) |
| 611 | *valuep = (data >> (8 * (offset & 3))) & |
| 612 | ((1 << (BIT(size) * 8)) - 1); |
| 613 | else |
| 614 | *valuep = data; |
| 615 | |
| 616 | if (!ret && PCI_BUS(bdf) == 0) |
| 617 | iproc_pcie_fix_cap(pcie, offset, valuep); |
| 618 | |
| 619 | return ret; |
| 620 | } |
| 621 | |
| 622 | static int iproc_pcie_config_write32(struct udevice *bus, pci_dev_t bdf, |
| 623 | uint offset, ulong value, |
| 624 | enum pci_size_t size) |
| 625 | { |
| 626 | void *addr; |
| 627 | ulong mask, tmp; |
| 628 | int ret; |
| 629 | |
| 630 | ret = iproc_pcie_map_ep_cfg_reg(bus, bdf, offset, &addr); |
| 631 | if (ret) |
| 632 | return ret; |
| 633 | |
| 634 | if (size == PCI_SIZE_32) { |
| 635 | writel(value, addr); |
| 636 | return ret; |
| 637 | } |
| 638 | |
| 639 | iproc_pcie_apb_err_disable(bus, bdf, true); |
| 640 | mask = ~(((1 << (BIT(size) * 8)) - 1) << ((offset & 0x3) * 8)); |
| 641 | tmp = readl(addr) & mask; |
| 642 | tmp |= (value << ((offset & 0x3) * 8)); |
| 643 | writel(tmp, addr); |
| 644 | iproc_pcie_apb_err_disable(bus, bdf, false); |
| 645 | |
| 646 | return ret; |
| 647 | } |
| 648 | |
| 649 | const static struct dm_pci_ops iproc_pcie_ops = { |
| 650 | .read_config = iproc_pcie_config_read32, |
| 651 | .write_config = iproc_pcie_config_write32, |
| 652 | }; |
| 653 | |
| 654 | static int iproc_pcie_rev_init(struct iproc_pcie *pcie) |
| 655 | { |
| 656 | unsigned int reg_idx; |
| 657 | const u16 *regs; |
| 658 | u16 num_elements; |
| 659 | |
| 660 | switch (pcie->type) { |
| 661 | case IPROC_PCIE_PAXC_V2: |
| 662 | pcie->ep_is_internal = true; |
| 663 | regs = iproc_pcie_reg_paxc_v2; |
| 664 | num_elements = ARRAY_SIZE(iproc_pcie_reg_paxc_v2); |
| 665 | break; |
| 666 | case IPROC_PCIE_PAXB_V2: |
| 667 | regs = iproc_pcie_reg_paxb_v2; |
| 668 | num_elements = ARRAY_SIZE(iproc_pcie_reg_paxb_v2); |
| 669 | pcie->has_apb_err_disable = true; |
| 670 | if (pcie->need_ob_cfg) { |
| 671 | pcie->ob.axi_offset = 0; |
| 672 | pcie->ob_map = paxb_v2_ob_map; |
| 673 | pcie->ob.nr_windows = ARRAY_SIZE(paxb_v2_ob_map); |
| 674 | } |
| 675 | pcie->need_ib_cfg = true; |
| 676 | pcie->ib.nr_regions = ARRAY_SIZE(paxb_v2_ib_map); |
| 677 | pcie->ib_map = paxb_v2_ib_map; |
| 678 | break; |
| 679 | default: |
| 680 | dev_dbg(pcie->dev, "incompatible iProc PCIe interface\n"); |
| 681 | return -EINVAL; |
| 682 | } |
| 683 | |
| 684 | pcie->reg_offsets = calloc(IPROC_PCIE_MAX_NUM_REG, |
| 685 | sizeof(*pcie->reg_offsets)); |
| 686 | if (!pcie->reg_offsets) |
| 687 | return -ENOMEM; |
| 688 | |
| 689 | /* go through the register table and populate all valid registers */ |
| 690 | pcie->reg_offsets[0] = (pcie->type == IPROC_PCIE_PAXC_V2) ? |
| 691 | IPROC_PCIE_REG_INVALID : regs[0]; |
| 692 | for (reg_idx = 1; reg_idx < num_elements; reg_idx++) |
| 693 | pcie->reg_offsets[reg_idx] = regs[reg_idx] ? |
| 694 | regs[reg_idx] : IPROC_PCIE_REG_INVALID; |
| 695 | |
| 696 | return 0; |
| 697 | } |
| 698 | |
| 699 | static inline bool iproc_pcie_ob_is_valid(struct iproc_pcie *pcie, |
| 700 | int window_idx) |
| 701 | { |
| 702 | u32 val; |
| 703 | |
| 704 | val = iproc_pcie_read_reg(pcie, MAP_REG(IPROC_PCIE_OARR0, window_idx)); |
| 705 | |
| 706 | return !!(val & OARR_VALID); |
| 707 | } |
| 708 | |
| 709 | static inline int iproc_pcie_ob_write(struct iproc_pcie *pcie, int window_idx, |
| 710 | int size_idx, u64 axi_addr, u64 pci_addr) |
| 711 | { |
| 712 | u16 oarr_offset, omap_offset; |
| 713 | |
| 714 | /* |
| 715 | * Derive the OARR/OMAP offset from the first pair (OARR0/OMAP0) based |
| 716 | * on window index. |
| 717 | */ |
| 718 | oarr_offset = iproc_pcie_reg_offset(pcie, MAP_REG(IPROC_PCIE_OARR0, |
| 719 | window_idx)); |
| 720 | omap_offset = iproc_pcie_reg_offset(pcie, MAP_REG(IPROC_PCIE_OMAP0, |
| 721 | window_idx)); |
| 722 | if (iproc_pcie_reg_is_invalid(oarr_offset) || |
| 723 | iproc_pcie_reg_is_invalid(omap_offset)) |
| 724 | return -EINVAL; |
| 725 | |
| 726 | /* |
| 727 | * Program the OARR registers. The upper 32-bit OARR register is |
| 728 | * always right after the lower 32-bit OARR register. |
| 729 | */ |
| 730 | writel(lower_32_bits(axi_addr) | (size_idx << OARR_SIZE_CFG_SHIFT) | |
| 731 | OARR_VALID, pcie->base + oarr_offset); |
| 732 | writel(upper_32_bits(axi_addr), pcie->base + oarr_offset + 4); |
| 733 | |
| 734 | /* now program the OMAP registers */ |
| 735 | writel(lower_32_bits(pci_addr), pcie->base + omap_offset); |
| 736 | writel(upper_32_bits(pci_addr), pcie->base + omap_offset + 4); |
| 737 | |
| 738 | debug("ob window [%d]: offset 0x%x axi %pap pci %pap\n", |
| 739 | window_idx, oarr_offset, &axi_addr, &pci_addr); |
| 740 | debug("oarr lo 0x%x oarr hi 0x%x\n", |
| 741 | readl(pcie->base + oarr_offset), |
| 742 | readl(pcie->base + oarr_offset + 4)); |
| 743 | debug("omap lo 0x%x omap hi 0x%x\n", |
| 744 | readl(pcie->base + omap_offset), |
| 745 | readl(pcie->base + omap_offset + 4)); |
| 746 | |
| 747 | return 0; |
| 748 | } |
| 749 | |
| 750 | /** |
| 751 | * iproc_pcie_setup_ob() - setup outbound address mapping |
| 752 | * |
| 753 | * Some iProc SoCs require the SW to configure the outbound address mapping |
| 754 | * Outbound address translation: |
| 755 | * |
| 756 | * iproc_pcie_address = axi_address - axi_offset |
| 757 | * OARR = iproc_pcie_address |
| 758 | * OMAP = pci_addr |
| 759 | * axi_addr -> iproc_pcie_address -> OARR -> OMAP -> pci_address |
| 760 | * |
| 761 | * @pcie: pcie device |
| 762 | * @axi_addr: axi address to be translated |
| 763 | * @pci_addr: pci address |
| 764 | * @size: window size |
| 765 | * |
| 766 | * @return: 0 on success and -ve on failure |
| 767 | */ |
| 768 | static int iproc_pcie_setup_ob(struct iproc_pcie *pcie, u64 axi_addr, |
| 769 | u64 pci_addr, resource_size_t size) |
| 770 | { |
| 771 | struct iproc_pcie_ob *ob = &pcie->ob; |
| 772 | int ret = -EINVAL, window_idx, size_idx; |
| 773 | |
| 774 | if (axi_addr < ob->axi_offset) { |
| 775 | pr_err("axi address %pap less than offset %pap\n", |
| 776 | &axi_addr, &ob->axi_offset); |
| 777 | return -EINVAL; |
| 778 | } |
| 779 | |
| 780 | /* |
| 781 | * Translate the AXI address to the internal address used by the iProc |
| 782 | * PCIe core before programming the OARR |
| 783 | */ |
| 784 | axi_addr -= ob->axi_offset; |
| 785 | |
| 786 | /* iterate through all OARR/OMAP mapping windows */ |
| 787 | for (window_idx = ob->nr_windows - 1; window_idx >= 0; window_idx--) { |
| 788 | const struct iproc_pcie_ob_map *ob_map = |
| 789 | &pcie->ob_map[window_idx]; |
| 790 | |
| 791 | /* |
| 792 | * If current outbound window is already in use, move on to the |
| 793 | * next one. |
| 794 | */ |
| 795 | if (iproc_pcie_ob_is_valid(pcie, window_idx)) |
| 796 | continue; |
| 797 | |
| 798 | /* |
| 799 | * Iterate through all supported window sizes within the |
| 800 | * OARR/OMAP pair to find a match. Go through the window sizes |
| 801 | * in a descending order. |
| 802 | */ |
| 803 | for (size_idx = ob_map->nr_sizes - 1; size_idx >= 0; |
| 804 | size_idx--) { |
| 805 | resource_size_t window_size = |
| 806 | ob_map->window_sizes[size_idx] * SZ_1M; |
| 807 | |
| 808 | /* |
| 809 | * Keep iterating until we reach the last window and |
| 810 | * with the minimal window size at index zero. In this |
| 811 | * case, we take a compromise by mapping it using the |
| 812 | * minimum window size that can be supported |
| 813 | */ |
| 814 | if (size < window_size) { |
| 815 | if (size_idx > 0 || window_idx > 0) |
| 816 | continue; |
| 817 | |
| 818 | /* |
| 819 | * For the corner case of reaching the minimal |
| 820 | * window size that can be supported on the |
| 821 | * last window |
| 822 | */ |
| 823 | axi_addr = ALIGN_DOWN(axi_addr, window_size); |
| 824 | pci_addr = ALIGN_DOWN(pci_addr, window_size); |
| 825 | size = window_size; |
| 826 | } |
| 827 | |
| 828 | if (!IS_ALIGNED(axi_addr, window_size) || |
| 829 | !IS_ALIGNED(pci_addr, window_size)) { |
| 830 | pr_err("axi %pap or pci %pap not aligned\n", |
| 831 | &axi_addr, &pci_addr); |
| 832 | return -EINVAL; |
| 833 | } |
| 834 | |
| 835 | /* |
| 836 | * Match found! Program both OARR and OMAP and mark |
| 837 | * them as a valid entry. |
| 838 | */ |
| 839 | ret = iproc_pcie_ob_write(pcie, window_idx, size_idx, |
| 840 | axi_addr, pci_addr); |
| 841 | if (ret) |
| 842 | goto err_ob; |
| 843 | |
| 844 | size -= window_size; |
| 845 | if (size == 0) |
| 846 | return 0; |
| 847 | |
| 848 | /* |
| 849 | * If we are here, we are done with the current window, |
| 850 | * but not yet finished all mappings. Need to move on |
| 851 | * to the next window. |
| 852 | */ |
| 853 | axi_addr += window_size; |
| 854 | pci_addr += window_size; |
| 855 | break; |
| 856 | } |
| 857 | } |
| 858 | |
| 859 | err_ob: |
| 860 | pr_err("unable to configure outbound mapping\n"); |
| 861 | pr_err("axi %pap, axi offset %pap, pci %pap, res size %pap\n", |
| 862 | &axi_addr, &ob->axi_offset, &pci_addr, &size); |
| 863 | |
| 864 | return ret; |
| 865 | } |
| 866 | |
| 867 | static int iproc_pcie_map_ranges(struct udevice *dev) |
| 868 | { |
| 869 | struct iproc_pcie *pcie = dev_get_priv(dev); |
| 870 | struct udevice *bus = pci_get_controller(dev); |
| 871 | struct pci_controller *hose = dev_get_uclass_priv(bus); |
| 872 | int i, ret; |
| 873 | |
| 874 | for (i = 0; i < hose->region_count; i++) { |
| 875 | if (hose->regions[i].flags == PCI_REGION_MEM || |
| 876 | hose->regions[i].flags == PCI_REGION_PREFETCH) { |
Bharat Gooty | 2cb3260 | 2021-08-23 14:57:24 +0530 | [diff] [blame] | 877 | debug("%d: bus_addr %p, axi_addr %p, size 0x%llx\n", |
Srinath Mannam | 4848704 | 2020-05-12 13:29:50 +0530 | [diff] [blame] | 878 | i, &hose->regions[i].bus_start, |
| 879 | &hose->regions[i].phys_start, |
| 880 | hose->regions[i].size); |
| 881 | ret = iproc_pcie_setup_ob(pcie, |
| 882 | hose->regions[i].phys_start, |
| 883 | hose->regions[i].bus_start, |
| 884 | hose->regions[i].size); |
| 885 | if (ret) |
| 886 | return ret; |
| 887 | } |
| 888 | } |
| 889 | |
| 890 | return 0; |
| 891 | } |
| 892 | |
| 893 | static inline bool iproc_pcie_ib_is_in_use(struct iproc_pcie *pcie, |
| 894 | int region_idx) |
| 895 | { |
| 896 | const struct iproc_pcie_ib_map *ib_map = &pcie->ib_map[region_idx]; |
| 897 | u32 val; |
| 898 | |
| 899 | val = iproc_pcie_read_reg(pcie, MAP_REG(IPROC_PCIE_IARR0, region_idx)); |
| 900 | |
| 901 | return !!(val & (BIT(ib_map->nr_sizes) - 1)); |
| 902 | } |
| 903 | |
| 904 | static inline bool |
| 905 | iproc_pcie_ib_check_type(const struct iproc_pcie_ib_map *ib_map, |
| 906 | enum iproc_pcie_ib_map_type type) |
| 907 | { |
| 908 | return !!(ib_map->type == type); |
| 909 | } |
| 910 | |
| 911 | static int iproc_pcie_ib_write(struct iproc_pcie *pcie, int region_idx, |
| 912 | int size_idx, int nr_windows, u64 axi_addr, |
| 913 | u64 pci_addr, resource_size_t size) |
| 914 | { |
| 915 | const struct iproc_pcie_ib_map *ib_map = &pcie->ib_map[region_idx]; |
| 916 | u16 iarr_offset, imap_offset; |
| 917 | u32 val; |
| 918 | int window_idx; |
| 919 | |
| 920 | iarr_offset = iproc_pcie_reg_offset(pcie, MAP_REG(IPROC_PCIE_IARR0, |
| 921 | region_idx)); |
| 922 | imap_offset = iproc_pcie_reg_offset(pcie, MAP_REG(IPROC_PCIE_IMAP0, |
| 923 | region_idx)); |
| 924 | if (iproc_pcie_reg_is_invalid(iarr_offset) || |
| 925 | iproc_pcie_reg_is_invalid(imap_offset)) |
| 926 | return -EINVAL; |
| 927 | |
| 928 | debug("ib region [%d]: offset 0x%x axi %pap pci %pap\n", |
| 929 | region_idx, iarr_offset, &axi_addr, &pci_addr); |
| 930 | |
| 931 | /* |
| 932 | * Program the IARR registers. The upper 32-bit IARR register is |
| 933 | * always right after the lower 32-bit IARR register. |
| 934 | */ |
| 935 | writel(lower_32_bits(pci_addr) | BIT(size_idx), |
| 936 | pcie->base + iarr_offset); |
| 937 | writel(upper_32_bits(pci_addr), pcie->base + iarr_offset + 4); |
| 938 | |
| 939 | debug("iarr lo 0x%x iarr hi 0x%x\n", |
| 940 | readl(pcie->base + iarr_offset), |
| 941 | readl(pcie->base + iarr_offset + 4)); |
| 942 | |
| 943 | /* |
| 944 | * Now program the IMAP registers. Each IARR region may have one or |
| 945 | * more IMAP windows. |
| 946 | */ |
| 947 | size >>= ilog2(nr_windows); |
| 948 | for (window_idx = 0; window_idx < nr_windows; window_idx++) { |
| 949 | val = readl(pcie->base + imap_offset); |
| 950 | val |= lower_32_bits(axi_addr) | IMAP_VALID; |
| 951 | writel(val, pcie->base + imap_offset); |
| 952 | writel(upper_32_bits(axi_addr), |
| 953 | pcie->base + imap_offset + ib_map->imap_addr_offset); |
| 954 | |
| 955 | debug("imap window [%d] lo 0x%x hi 0x%x\n", |
| 956 | window_idx, readl(pcie->base + imap_offset), |
| 957 | readl(pcie->base + imap_offset + |
| 958 | ib_map->imap_addr_offset)); |
| 959 | |
| 960 | imap_offset += ib_map->imap_window_offset; |
| 961 | axi_addr += size; |
| 962 | } |
| 963 | |
| 964 | return 0; |
| 965 | } |
| 966 | |
| 967 | /** |
| 968 | * iproc_pcie_setup_ib() - setup inbound address mapping |
| 969 | * |
| 970 | * @pcie: pcie device |
| 971 | * @axi_addr: axi address to be translated |
| 972 | * @pci_addr: pci address |
| 973 | * @size: window size |
| 974 | * @type: inbound mapping type |
| 975 | * |
| 976 | * @return: 0 on success and -ve on failure |
| 977 | */ |
| 978 | static int iproc_pcie_setup_ib(struct iproc_pcie *pcie, u64 axi_addr, |
| 979 | u64 pci_addr, resource_size_t size, |
| 980 | enum iproc_pcie_ib_map_type type) |
| 981 | { |
| 982 | struct iproc_pcie_ib *ib = &pcie->ib; |
| 983 | int ret; |
| 984 | unsigned int region_idx, size_idx; |
| 985 | |
| 986 | /* iterate through all IARR mapping regions */ |
| 987 | for (region_idx = 0; region_idx < ib->nr_regions; region_idx++) { |
| 988 | const struct iproc_pcie_ib_map *ib_map = |
| 989 | &pcie->ib_map[region_idx]; |
| 990 | |
| 991 | /* |
| 992 | * If current inbound region is already in use or not a |
| 993 | * compatible type, move on to the next. |
| 994 | */ |
| 995 | if (iproc_pcie_ib_is_in_use(pcie, region_idx) || |
| 996 | !iproc_pcie_ib_check_type(ib_map, type)) |
| 997 | continue; |
| 998 | |
| 999 | /* iterate through all supported region sizes to find a match */ |
| 1000 | for (size_idx = 0; size_idx < ib_map->nr_sizes; size_idx++) { |
| 1001 | resource_size_t region_size = |
| 1002 | ib_map->region_sizes[size_idx] * ib_map->size_unit; |
| 1003 | |
| 1004 | if (size != region_size) |
| 1005 | continue; |
| 1006 | |
| 1007 | if (!IS_ALIGNED(axi_addr, region_size) || |
| 1008 | !IS_ALIGNED(pci_addr, region_size)) { |
| 1009 | pr_err("axi %pap or pci %pap not aligned\n", |
| 1010 | &axi_addr, &pci_addr); |
| 1011 | return -EINVAL; |
| 1012 | } |
| 1013 | |
| 1014 | /* Match found! Program IARR and all IMAP windows. */ |
| 1015 | ret = iproc_pcie_ib_write(pcie, region_idx, size_idx, |
| 1016 | ib_map->nr_windows, axi_addr, |
| 1017 | pci_addr, size); |
| 1018 | if (ret) |
| 1019 | goto err_ib; |
| 1020 | else |
| 1021 | return 0; |
| 1022 | } |
| 1023 | } |
| 1024 | ret = -EINVAL; |
| 1025 | |
| 1026 | err_ib: |
| 1027 | pr_err("unable to configure inbound mapping\n"); |
| 1028 | pr_err("axi %pap, pci %pap, res size %pap\n", |
| 1029 | &axi_addr, &pci_addr, &size); |
| 1030 | |
| 1031 | return ret; |
| 1032 | } |
| 1033 | |
| 1034 | static int iproc_pcie_map_dma_ranges(struct iproc_pcie *pcie) |
| 1035 | { |
| 1036 | int ret; |
| 1037 | struct pci_region regions; |
| 1038 | int i = 0; |
| 1039 | |
| 1040 | while (!pci_get_dma_regions(pcie->dev, ®ions, i)) { |
| 1041 | dev_dbg(pcie->dev, |
Bharat Gooty | 2cb3260 | 2021-08-23 14:57:24 +0530 | [diff] [blame] | 1042 | "dma %d: bus_addr %#llx, axi_addr %#llx, size %#llx\n", |
Srinath Mannam | 4848704 | 2020-05-12 13:29:50 +0530 | [diff] [blame] | 1043 | i, regions.bus_start, regions.phys_start, regions.size); |
| 1044 | |
| 1045 | /* Each range entry corresponds to an inbound mapping region */ |
| 1046 | ret = iproc_pcie_setup_ib(pcie, regions.phys_start, |
| 1047 | regions.bus_start, |
| 1048 | regions.size, |
| 1049 | IPROC_PCIE_IB_MAP_MEM); |
| 1050 | if (ret) |
| 1051 | return ret; |
| 1052 | i++; |
| 1053 | } |
| 1054 | return 0; |
| 1055 | } |
| 1056 | |
| 1057 | static void iproc_pcie_reset_map_regs(struct iproc_pcie *pcie) |
| 1058 | { |
| 1059 | struct iproc_pcie_ib *ib = &pcie->ib; |
| 1060 | struct iproc_pcie_ob *ob = &pcie->ob; |
| 1061 | int window_idx, region_idx; |
| 1062 | |
| 1063 | if (pcie->ep_is_internal) |
| 1064 | return; |
| 1065 | |
| 1066 | /* iterate through all OARR mapping regions */ |
| 1067 | for (window_idx = ob->nr_windows - 1; window_idx >= 0; window_idx--) { |
| 1068 | iproc_pcie_write_reg(pcie, MAP_REG(IPROC_PCIE_OARR0, |
| 1069 | window_idx), 0); |
| 1070 | } |
| 1071 | |
| 1072 | /* iterate through all IARR mapping regions */ |
| 1073 | for (region_idx = 0; region_idx < ib->nr_regions; region_idx++) { |
| 1074 | iproc_pcie_write_reg(pcie, MAP_REG(IPROC_PCIE_IARR0, |
| 1075 | region_idx), 0); |
| 1076 | } |
| 1077 | } |
| 1078 | |
| 1079 | static void iproc_pcie_reset(struct iproc_pcie *pcie) |
| 1080 | { |
| 1081 | u32 val; |
| 1082 | |
| 1083 | /* |
| 1084 | * PAXC and the internal emulated endpoint device downstream should not |
| 1085 | * be reset. If firmware has been loaded on the endpoint device at an |
| 1086 | * earlier boot stage, reset here causes issues. |
| 1087 | */ |
| 1088 | if (pcie->ep_is_internal) |
| 1089 | return; |
| 1090 | |
| 1091 | /* |
| 1092 | * Select perst_b signal as reset source. Put the device into reset, |
| 1093 | * and then bring it out of reset |
| 1094 | */ |
| 1095 | val = iproc_pcie_read_reg(pcie, IPROC_PCIE_CLK_CTRL); |
| 1096 | val &= ~EP_PERST_SOURCE_SELECT & ~EP_MODE_SURVIVE_PERST & |
| 1097 | ~RC_PCIE_RST_OUTPUT; |
| 1098 | iproc_pcie_write_reg(pcie, IPROC_PCIE_CLK_CTRL, val); |
| 1099 | udelay(250); |
| 1100 | |
| 1101 | val |= RC_PCIE_RST_OUTPUT; |
| 1102 | iproc_pcie_write_reg(pcie, IPROC_PCIE_CLK_CTRL, val); |
| 1103 | mdelay(100); |
| 1104 | } |
| 1105 | |
| 1106 | static inline bool iproc_pcie_link_is_active(struct iproc_pcie *pcie) |
| 1107 | { |
| 1108 | u32 val; |
| 1109 | |
| 1110 | val = iproc_pcie_read_reg(pcie, IPROC_PCIE_LINK_STATUS); |
| 1111 | return !!((val & PCIE_PHYLINKUP) && (val & PCIE_DL_ACTIVE)); |
| 1112 | } |
| 1113 | |
| 1114 | static int iproc_pcie_check_link(struct iproc_pcie *pcie) |
| 1115 | { |
| 1116 | u32 link_status, class; |
| 1117 | |
| 1118 | pcie->link_is_active = false; |
Pali Rohár | 253373d | 2022-01-05 10:50:20 +0100 | [diff] [blame] | 1119 | /* force class to PCI bridge Normal decode (0x060400) */ |
Srinath Mannam | 4848704 | 2020-05-12 13:29:50 +0530 | [diff] [blame] | 1120 | #define PCI_BRIDGE_CTRL_REG_OFFSET 0x43c |
Pali Rohár | 253373d | 2022-01-05 10:50:20 +0100 | [diff] [blame] | 1121 | #define PCI_BRIDGE_CTRL_REG_CLASS_MASK 0xffffff |
Srinath Mannam | 4848704 | 2020-05-12 13:29:50 +0530 | [diff] [blame] | 1122 | iproc_pci_raw_config_read32(pcie, 0, |
| 1123 | PCI_BRIDGE_CTRL_REG_OFFSET, |
| 1124 | 4, &class); |
Pali Rohár | 253373d | 2022-01-05 10:50:20 +0100 | [diff] [blame] | 1125 | class &= ~PCI_BRIDGE_CTRL_REG_CLASS_MASK; |
Pali Rohár | d7b9040 | 2022-02-18 13:18:40 +0100 | [diff] [blame] | 1126 | class |= PCI_CLASS_BRIDGE_PCI_NORMAL; |
Srinath Mannam | 4848704 | 2020-05-12 13:29:50 +0530 | [diff] [blame] | 1127 | iproc_pci_raw_config_write32(pcie, 0, |
| 1128 | PCI_BRIDGE_CTRL_REG_OFFSET, |
| 1129 | 4, class); |
| 1130 | |
| 1131 | /* |
| 1132 | * PAXC connects to emulated endpoint devices directly and does not |
| 1133 | * have a Serdes. Therefore skip the link detection logic here. |
| 1134 | */ |
| 1135 | if (pcie->ep_is_internal) { |
| 1136 | pcie->link_is_active = true; |
| 1137 | return 0; |
| 1138 | } |
| 1139 | |
| 1140 | if (!iproc_pcie_link_is_active(pcie)) { |
| 1141 | pr_err("PHY or data link is INACTIVE!\n"); |
| 1142 | return -ENODEV; |
| 1143 | } |
| 1144 | |
| 1145 | #define PCI_TARGET_LINK_SPEED_MASK 0xf |
| 1146 | #define PCI_TARGET_LINK_WIDTH_MASK 0x3f |
| 1147 | #define PCI_TARGET_LINK_WIDTH_OFFSET 0x4 |
| 1148 | |
| 1149 | /* check link status to see if link is active */ |
| 1150 | iproc_pci_raw_config_read32(pcie, 0, |
| 1151 | IPROC_PCI_EXP_CAP + PCI_EXP_LNKSTA, |
| 1152 | 2, &link_status); |
| 1153 | if (link_status & PCI_EXP_LNKSTA_NLW) |
| 1154 | pcie->link_is_active = true; |
| 1155 | |
| 1156 | if (pcie->link_is_active) |
| 1157 | pr_info("link UP @ Speed Gen-%d and width-x%d\n", |
| 1158 | link_status & PCI_TARGET_LINK_SPEED_MASK, |
| 1159 | (link_status >> PCI_TARGET_LINK_WIDTH_OFFSET) & |
| 1160 | PCI_TARGET_LINK_WIDTH_MASK); |
| 1161 | else |
| 1162 | pr_info("link DOWN\n"); |
| 1163 | |
| 1164 | return 0; |
| 1165 | } |
| 1166 | |
| 1167 | static int iproc_pcie_probe(struct udevice *dev) |
| 1168 | { |
| 1169 | struct iproc_pcie *pcie = dev_get_priv(dev); |
| 1170 | int ret; |
| 1171 | |
| 1172 | pcie->type = (enum iproc_pcie_type)dev_get_driver_data(dev); |
| 1173 | debug("PAX type %d\n", pcie->type); |
| 1174 | pcie->base = dev_read_addr_ptr(dev); |
| 1175 | debug("PAX reg base %p\n", pcie->base); |
| 1176 | |
| 1177 | if (!pcie->base) |
| 1178 | return -ENODEV; |
| 1179 | |
| 1180 | if (dev_read_bool(dev, "brcm,pcie-ob")) |
| 1181 | pcie->need_ob_cfg = true; |
| 1182 | |
| 1183 | pcie->dev = dev; |
| 1184 | ret = iproc_pcie_rev_init(pcie); |
| 1185 | if (ret) |
| 1186 | return ret; |
| 1187 | |
| 1188 | if (!pcie->ep_is_internal) { |
| 1189 | ret = generic_phy_get_by_name(dev, "pcie-phy", &pcie->phy); |
| 1190 | if (!ret) { |
| 1191 | ret = generic_phy_init(&pcie->phy); |
| 1192 | if (ret) { |
| 1193 | pr_err("failed to init %s PHY\n", dev->name); |
| 1194 | return ret; |
| 1195 | } |
| 1196 | |
| 1197 | ret = generic_phy_power_on(&pcie->phy); |
| 1198 | if (ret) { |
| 1199 | pr_err("power on %s PHY failed\n", dev->name); |
| 1200 | goto err_exit_phy; |
| 1201 | } |
| 1202 | } |
| 1203 | } |
| 1204 | |
| 1205 | iproc_pcie_reset(pcie); |
| 1206 | |
| 1207 | if (pcie->need_ob_cfg) { |
| 1208 | ret = iproc_pcie_map_ranges(dev); |
| 1209 | if (ret) { |
| 1210 | pr_err("outbound map failed\n"); |
| 1211 | goto err_power_off_phy; |
| 1212 | } |
| 1213 | } |
| 1214 | |
| 1215 | if (pcie->need_ib_cfg) { |
| 1216 | ret = iproc_pcie_map_dma_ranges(pcie); |
| 1217 | if (ret) { |
| 1218 | pr_err("inbound map failed\n"); |
| 1219 | goto err_power_off_phy; |
| 1220 | } |
| 1221 | } |
| 1222 | |
| 1223 | if (iproc_pcie_check_link(pcie)) |
| 1224 | pr_info("no PCIe EP device detected\n"); |
| 1225 | |
| 1226 | return 0; |
| 1227 | |
| 1228 | err_power_off_phy: |
| 1229 | generic_phy_power_off(&pcie->phy); |
| 1230 | err_exit_phy: |
| 1231 | generic_phy_exit(&pcie->phy); |
| 1232 | return ret; |
| 1233 | } |
| 1234 | |
| 1235 | static int iproc_pcie_remove(struct udevice *dev) |
| 1236 | { |
| 1237 | struct iproc_pcie *pcie = dev_get_priv(dev); |
| 1238 | int ret; |
| 1239 | |
| 1240 | iproc_pcie_reset_map_regs(pcie); |
| 1241 | |
| 1242 | if (generic_phy_valid(&pcie->phy)) { |
| 1243 | ret = generic_phy_power_off(&pcie->phy); |
| 1244 | if (ret) { |
| 1245 | pr_err("failed to power off PCIe phy\n"); |
| 1246 | return ret; |
| 1247 | } |
| 1248 | |
| 1249 | ret = generic_phy_exit(&pcie->phy); |
| 1250 | if (ret) { |
| 1251 | pr_err("failed to power off PCIe phy\n"); |
| 1252 | return ret; |
| 1253 | } |
| 1254 | } |
| 1255 | |
| 1256 | return 0; |
| 1257 | } |
| 1258 | |
| 1259 | static const struct udevice_id pci_iproc_ids[] = { |
| 1260 | { .compatible = "brcm,iproc-pcie-paxb-v2", |
| 1261 | .data = IPROC_PCIE_PAXB_V2 }, |
| 1262 | { .compatible = "brcm,iproc-pcie-paxc-v2", |
| 1263 | .data = IPROC_PCIE_PAXC_V2 }, |
| 1264 | { } |
| 1265 | }; |
| 1266 | |
| 1267 | U_BOOT_DRIVER(pci_iproc) = { |
| 1268 | .name = "pci_iproc", |
| 1269 | .id = UCLASS_PCI, |
| 1270 | .of_match = pci_iproc_ids, |
| 1271 | .ops = &iproc_pcie_ops, |
| 1272 | .probe = iproc_pcie_probe, |
| 1273 | .remove = iproc_pcie_remove, |
Simon Glass | 41575d8 | 2020-12-03 16:55:17 -0700 | [diff] [blame] | 1274 | .priv_auto = sizeof(struct iproc_pcie), |
Simon Glass | 4d7bab1 | 2021-01-24 14:32:43 -0700 | [diff] [blame] | 1275 | .flags = DM_FLAG_OS_PREPARE, |
Srinath Mannam | 4848704 | 2020-05-12 13:29:50 +0530 | [diff] [blame] | 1276 | }; |