| Lokesh Vutla | a7551cf | 2020-08-05 22:44:28 +0530 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /* |
| 3 | * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/ |
| 4 | */ |
| 5 | |
| 6 | /dts-v1/; |
| 7 | |
| 8 | #include "k3-j7200.dtsi" |
| 9 | |
| 10 | / { |
| 11 | memory@80000000 { |
| 12 | device_type = "memory"; |
| 13 | /* 4G RAM */ |
| 14 | reg = <0x00000000 0x80000000 0x00000000 0x80000000>, |
| 15 | <0x00000008 0x80000000 0x00000000 0x80000000>; |
| 16 | }; |
| 17 | |
| 18 | reserved_memory: reserved-memory { |
| 19 | #address-cells = <2>; |
| 20 | #size-cells = <2>; |
| 21 | ranges; |
| 22 | |
| 23 | secure_ddr: optee@9e800000 { |
| 24 | reg = <0x00 0x9e800000 0x00 0x01800000>; |
| 25 | alignment = <0x1000>; |
| 26 | no-map; |
| 27 | }; |
| 28 | }; |
| 29 | }; |
| Vignesh Raghavendra | 28e29fb | 2020-08-07 00:26:59 +0530 | [diff] [blame] | 30 | |
| 31 | &wkup_pmx0 { |
| 32 | mcu_fss0_hpb0_pins_default: mcu-fss0-hpb0-pins-default { |
| 33 | pinctrl-single,pins = < |
| 34 | J721E_WKUP_IOPAD(0x0, PIN_OUTPUT, 1) /* (B6) MCU_OSPI0_CLK.MCU_HYPERBUS0_CK */ |
| 35 | J721E_WKUP_IOPAD(0x4, PIN_OUTPUT, 1) /* (C8) MCU_OSPI0_LBCLKO.MCU_HYPERBUS0_CKn */ |
| 36 | J721E_WKUP_IOPAD(0x2c, PIN_OUTPUT, 1) /* (D6) MCU_OSPI0_CSn0.MCU_HYPERBUS0_CSn0 */ |
| 37 | J721E_WKUP_IOPAD(0x30, PIN_OUTPUT, 1) /* (D7) MCU_OSPI0_CSn1.MCU_HYPERBUS0_RESETn */ |
| 38 | J721E_WKUP_IOPAD(0x8, PIN_INPUT, 1) /* (B7) MCU_OSPI0_DQS.MCU_HYPERBUS0_RWDS */ |
| 39 | J721E_WKUP_IOPAD(0xc, PIN_INPUT, 1) /* (D8) MCU_OSPI0_D0.MCU_HYPERBUS0_DQ0 */ |
| 40 | J721E_WKUP_IOPAD(0x10, PIN_INPUT, 1) /* (C7) MCU_OSPI0_D1.MCU_HYPERBUS0_DQ1 */ |
| 41 | J721E_WKUP_IOPAD(0x14, PIN_INPUT, 1) /* (C5) MCU_OSPI0_D2.MCU_HYPERBUS0_DQ2 */ |
| 42 | J721E_WKUP_IOPAD(0x18, PIN_INPUT, 1) /* (A5) MCU_OSPI0_D3.MCU_HYPERBUS0_DQ3 */ |
| 43 | J721E_WKUP_IOPAD(0x1c, PIN_INPUT, 1) /* (A6) MCU_OSPI0_D4.MCU_HYPERBUS0_DQ4 */ |
| 44 | J721E_WKUP_IOPAD(0x20, PIN_INPUT, 1) /* (B8) MCU_OSPI0_D5.MCU_HYPERBUS0_DQ5 */ |
| 45 | J721E_WKUP_IOPAD(0x24, PIN_INPUT, 1) /* (A8) MCU_OSPI0_D6.MCU_HYPERBUS0_DQ6 */ |
| 46 | J721E_WKUP_IOPAD(0x28, PIN_INPUT, 1) /* (A7) MCU_OSPI0_D7.MCU_HYPERBUS0_DQ7 */ |
| 47 | >; |
| 48 | }; |
| 49 | }; |
| 50 | |
| 51 | &hbmc { |
| 52 | status = "disabled"; |
| 53 | pinctrl-names = "default"; |
| 54 | pinctrl-0 = <&mcu_fss0_hpb0_pins_default>; |
| 55 | ranges = <0x0 0x0 0x5 0x0 0x4000000>, /* 64MB Flash on CS0 */ |
| 56 | <0x1 0x0 0x5 0x4000000 0x800000>; /* 8MB RAM on CS1 */ |
| 57 | |
| 58 | flash@0,0 { |
| 59 | compatible = "cypress,hyperflash", "cfi-flash"; |
| 60 | reg = <0x0 0x0 0x4000000>; |
| 61 | }; |
| 62 | }; |