blob: 301d9b3ab996b1eb3fd8e284aee5ec14d1c1d8ac [file] [log] [blame]
Ying Zhangbb0dc102013-08-16 15:16:11 +08001/*
2 * Copyright 2013 Freescale Semiconductor, Inc.
3 *
York Sunbf902562013-08-20 10:15:37 -07004 * SPDX-License-Identifier: GPL-2.0+
Ying Zhangbb0dc102013-08-16 15:16:11 +08005 */
6
7#include <common.h>
8#include <mmc.h>
9#include <malloc.h>
10
11/*
12 * The environment variables are written to just after the u-boot image
13 * on SDCard, so we must read the MBR to get the start address and code
14 * length of the u-boot image, then calculate the address of the env.
15 */
16#define ESDHC_BOOT_IMAGE_SIZE 0x48
17#define ESDHC_BOOT_IMAGE_ADDR 0x50
18#define MBRDBR_BOOT_SIG_55 0x1fe
19#define MBRDBR_BOOT_SIG_AA 0x1ff
20#define CONFIG_CFG_DATA_SECTOR 0
21
Prabhakar Kushwaha1eaa7422014-04-08 19:13:22 +053022
23void mmc_spl_load_image(uint32_t offs, unsigned int size, void *vdst)
24{
25 uint blk_start, blk_cnt, err;
26
27 struct mmc *mmc = find_mmc_device(0);
28 if (!mmc) {
29 puts("spl: mmc device not found!!\n");
30 hang();
31 }
32
33 if (mmc_init(mmc)) {
34 puts("MMC init failed\n");
35 return;
36 }
37
38 blk_start = ALIGN(offs, mmc->read_bl_len) / mmc->read_bl_len;
39 blk_cnt = ALIGN(size, mmc->read_bl_len) / mmc->read_bl_len;
40
Stephen Warren7c4213f2015-12-07 11:38:48 -070041 err = mmc->block_dev.block_read(&mmc->block_dev, blk_start, blk_cnt,
42 vdst);
Prabhakar Kushwaha1eaa7422014-04-08 19:13:22 +053043 if (err != blk_cnt) {
44 puts("spl: mmc read failed!!\n");
45 hang();
46 }
47}
48
Ying Zhangbb0dc102013-08-16 15:16:11 +080049/*
50 * The main entry for mmc booting. It's necessary that SDRAM is already
51 * configured and available since this code loads the main U-Boot image
52 * from mmc into SDRAM and starts it from there.
53 */
54
55void __noreturn mmc_boot(void)
56{
57 __attribute__((noreturn)) void (*uboot)(void);
58 uint blk_start, blk_cnt, err;
Prabhakar Kushwaha613ab322014-03-31 15:32:03 +053059#ifndef CONFIG_FSL_CORENET
Ying Zhangbb0dc102013-08-16 15:16:11 +080060 uchar *tmp_buf;
Prabhakar Kushwaha613ab322014-03-31 15:32:03 +053061 u32 blklen;
Ying Zhangbb0dc102013-08-16 15:16:11 +080062 uchar val;
63 uint i, byte_num;
Prabhakar Kushwaha613ab322014-03-31 15:32:03 +053064#endif
Ying Zhangbb0dc102013-08-16 15:16:11 +080065 u32 offset, code_len;
66 struct mmc *mmc;
67
68 mmc = find_mmc_device(0);
69 if (!mmc) {
70 puts("spl: mmc device not found!!\n");
71 hang();
72 }
73
Priyanka Jain4520a2f2013-11-28 10:12:16 +053074#ifdef CONFIG_FSL_CORENET
75 offset = CONFIG_SYS_MMC_U_BOOT_OFFS;
76 code_len = CONFIG_SYS_MMC_U_BOOT_SIZE;
77#else
Ying Zhangbb0dc102013-08-16 15:16:11 +080078 blklen = mmc->read_bl_len;
79 tmp_buf = malloc(blklen);
80 if (!tmp_buf) {
81 puts("spl: malloc memory failed!!\n");
82 hang();
83 }
84 memset(tmp_buf, 0, blklen);
85
86 /*
87 * Read source addr from sd card
88 */
Stephen Warren7c4213f2015-12-07 11:38:48 -070089 err = mmc->block_dev.block_read(&mmc->block_dev,
90 CONFIG_CFG_DATA_SECTOR, 1, tmp_buf);
Ying Zhangbb0dc102013-08-16 15:16:11 +080091 if (err != 1) {
92 puts("spl: mmc read failed!!\n");
93 free(tmp_buf);
94 hang();
95 }
96
97 val = *(tmp_buf + MBRDBR_BOOT_SIG_55);
98 if (0x55 != val) {
99 puts("spl: mmc signature is not valid!!\n");
100 free(tmp_buf);
101 hang();
102 }
103 val = *(tmp_buf + MBRDBR_BOOT_SIG_AA);
104 if (0xAA != val) {
105 puts("spl: mmc signature is not valid!!\n");
106 free(tmp_buf);
107 hang();
108 }
109
110 byte_num = 4;
111 offset = 0;
112 for (i = 0; i < byte_num; i++) {
113 val = *(tmp_buf + ESDHC_BOOT_IMAGE_ADDR + i);
114 offset = (offset << 8) + val;
115 }
116 offset += CONFIG_SYS_MMC_U_BOOT_OFFS;
117 /* Get the code size from offset 0x48 */
118 byte_num = 4;
119 code_len = 0;
120 for (i = 0; i < byte_num; i++) {
121 val = *(tmp_buf + ESDHC_BOOT_IMAGE_SIZE + i);
122 code_len = (code_len << 8) + val;
123 }
124 code_len -= CONFIG_SYS_MMC_U_BOOT_OFFS;
125 /*
126 * Load U-Boot image from mmc into RAM
127 */
Priyanka Jain4520a2f2013-11-28 10:12:16 +0530128#endif
Ying Zhangbb0dc102013-08-16 15:16:11 +0800129 blk_start = ALIGN(offset, mmc->read_bl_len) / mmc->read_bl_len;
130 blk_cnt = ALIGN(code_len, mmc->read_bl_len) / mmc->read_bl_len;
Stephen Warren7c4213f2015-12-07 11:38:48 -0700131 err = mmc->block_dev.block_read(&mmc->block_dev, blk_start, blk_cnt,
Ying Zhangbb0dc102013-08-16 15:16:11 +0800132 (uchar *)CONFIG_SYS_MMC_U_BOOT_DST);
133 if (err != blk_cnt) {
134 puts("spl: mmc read failed!!\n");
Prabhakar Kushwaha613ab322014-03-31 15:32:03 +0530135#ifndef CONFIG_FSL_CORENET
Ying Zhangbb0dc102013-08-16 15:16:11 +0800136 free(tmp_buf);
Prabhakar Kushwaha613ab322014-03-31 15:32:03 +0530137#endif
Ying Zhangbb0dc102013-08-16 15:16:11 +0800138 hang();
139 }
140
141 /*
142 * Clean d-cache and invalidate i-cache, to
143 * make sure that no stale data is executed.
144 */
145 flush_cache(CONFIG_SYS_MMC_U_BOOT_DST, CONFIG_SYS_MMC_U_BOOT_SIZE);
146
147 /*
148 * Jump to U-Boot image
149 */
150 uboot = (void *)CONFIG_SYS_MMC_U_BOOT_START;
151 (*uboot)();
152}