blob: 04a4e7716f277ea062e97b773eefdda42d8404ab [file] [log] [blame]
Nobuhiro Iwamatsu72d42ba2014-12-17 08:03:00 +09001menu "MMC Host controller Support"
2
Maxime Ripard7a777f62015-10-15 22:04:05 +02003config MMC
Masahiro Yamadac2726992016-12-07 22:10:26 +09004 bool "MMC/SD/SDIO card support"
5 default ARM || PPC || SANDBOX
Adam Ford1811a922018-02-06 12:43:56 -06006 select HAVE_BLOCK_DEVICE
Maxime Ripard7a777f62015-10-15 22:04:05 +02007 help
Masahiro Yamadac2726992016-12-07 22:10:26 +09008 This selects MultiMediaCard, Secure Digital and Secure
9 Digital I/O support.
10
11 If you want MMC/SD/SDIO support, you should say Y here and
12 also to your specific host controller driver.
Maxime Ripard7a777f62015-10-15 22:04:05 +020013
Jean-Jacques Hiblotd6400c32018-01-04 15:23:32 +010014config MMC_WRITE
15 bool "support for MMC/SD write operations"
16 depends on MMC
17 default y
18 help
19 Enable write access to MMC and SD Cards
20
Jun Nie2f516e42018-01-02 12:25:57 +080021config MMC_BROKEN_CD
22 bool "Poll for broken card detection case"
23 help
24 If card detection feature is broken, just poll to detect.
25
Simon Glasse7ecf7c2015-06-23 15:38:48 -060026config DM_MMC
27 bool "Enable MMC controllers using Driver Model"
28 depends on DM
29 help
Robert P. J. Day62a3b7d2016-07-15 13:44:45 -040030 This enables the MultiMediaCard (MMC) uclass which supports MMC and
Simon Glasse7ecf7c2015-06-23 15:38:48 -060031 Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.)
32 and non-removable (e.g. eMMC chip) devices are supported. These
33 appear as block devices in U-Boot and can support filesystems such
34 as EXT4 and FAT.
35
Simon Glassc4d660d2017-07-04 13:31:19 -060036config SPL_DM_MMC
37 bool "Enable MMC controllers using Driver Model in SPL"
38 depends on SPL_DM && DM_MMC
39 default y
40 help
41 This enables the MultiMediaCard (MMC) uclass which supports MMC and
42 Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.)
43 and non-removable (e.g. eMMC chip) devices are supported. These
44 appear as block devices in U-Boot and can support filesystems such
45 as EXT4 and FAT.
46
Masahiro Yamadae298c462016-12-07 22:10:27 +090047if MMC
48
Patrice Chotard3c0dbed2017-10-23 10:57:31 +020049config ARM_PL180_MMCI
50 bool "ARM AMBA Multimedia Card Interface and compatible support"
51 depends on DM_MMC && OF_CONTROL
52 help
53 This selects the ARM(R) AMBA(R) PrimeCell Multimedia Card
54 Interface (PL180, PL181 and compatible) support.
55 If you have an ARM(R) platform with a Multimedia Card slot,
56 say Y or M here.
57
Kishon Vijay Abraham I83dc4222017-09-21 16:30:10 +020058config MMC_QUIRKS
59 bool "Enable quirks"
60 default y
61 help
62 Some cards and hosts may sometimes behave unexpectedly (quirks).
63 This option enable workarounds to handle those quirks. Some of them
64 are enabled by default, other may require additionnal flags or are
65 enabled by the host driver.
66
Jean-Jacques Hiblotcf177892017-11-30 17:44:02 +010067config MMC_HW_PARTITIONING
68 bool "Support for HW partitioning command(eMMC)"
69 default y
70 help
71 This adds a command and an API to do hardware partitioning on eMMC
72 devices.
73
Alex Kiernan5a7b11e2018-05-08 04:43:31 +000074config SUPPORT_EMMC_RPMB
75 bool "Support eMMC replay protected memory block (RPMB)"
76 imply CMD_MMC_RPMB
77 help
78 Enable support for reading, writing and programming the
79 key for the Replay Protection Memory Block partition in eMMC.
80
Jean-Jacques Hiblotf99c2ef2017-11-30 17:44:01 +010081config MMC_IO_VOLTAGE
82 bool "Support IO voltage configuration"
83 help
84 IO voltage configuration allows selecting the voltage level of the IO
85 lines (not the level of main supply). This is required for UHS
86 support. For eMMC this not mandatory, but not enabling this option may
87 prevent the driver of using the faster modes.
88
89config SPL_MMC_IO_VOLTAGE
90 bool "Support IO voltage configuration in SPL"
91 default n
92 help
93 IO voltage configuration allows selecting the voltage level of the IO
94 lines (not the level of main supply). This is required for UHS
95 support. For eMMC this not mandatory, but not enabling this option may
96 prevent the driver of using the faster modes.
97
98config MMC_UHS_SUPPORT
99 bool "enable UHS support"
100 depends on MMC_IO_VOLTAGE
101 help
102 The Ultra High Speed (UHS) bus is available on some SDHC and SDXC
103 cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus
104 frequency can go up to 208MHz (SDR104)
105
106config SPL_MMC_UHS_SUPPORT
107 bool "enable UHS support in SPL"
108 depends on SPL_MMC_IO_VOLTAGE
109 help
110 The Ultra High Speed (UHS) bus is available on some SDHC and SDXC
111 cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus
112 frequency can go up to 208MHz (SDR104)
113
Peng Fan3dd26262018-08-10 14:07:54 +0800114config MMC_HS400_SUPPORT
115 bool "enable HS400 support"
116 select MMC_HS200_SUPPORT
117 help
118 The HS400 mode is support by some eMMC. The bus frequency is up to
119 200MHz. This mode requires tuning the IO.
120
121config SPL_MMC_HS400_SUPPORT
122 bool "enable HS400 support in SPL"
123 help
124 The HS400 mode is support by some eMMC. The bus frequency is up to
125 200MHz. This mode requires tuning the IO.
126
Jean-Jacques Hiblotf99c2ef2017-11-30 17:44:01 +0100127config MMC_HS200_SUPPORT
128 bool "enable HS200 support"
129 help
130 The HS200 mode is support by some eMMC. The bus frequency is up to
131 200MHz. This mode requires tuning the IO.
132
133
134config SPL_MMC_HS200_SUPPORT
135 bool "enable HS200 support in SPL"
136 help
137 The HS200 mode is support by some eMMC. The bus frequency is up to
138 200MHz. This mode requires tuning the IO.
139
Jean-Jacques Hiblot35f9e192017-09-21 16:29:53 +0200140config MMC_VERBOSE
141 bool "Output more information about the MMC"
142 default y
143 help
144 Enable the output of more information about the card such as the
145 operating mode.
146
Jaehoon Chung72b5a032018-01-26 19:25:31 +0900147config MMC_TRACE
148 bool "MMC debugging"
149 default n
150 help
151 This is an option for use by developer. Enable MMC core debugging.
152
153 If you need to see the MMC core message, say Y.
154
Marek Vasutb5b838f2016-12-01 02:06:33 +0100155config SPL_MMC_TINY
156 bool "Tiny MMC framework in SPL"
157 help
158 Enable MMC framework tinification support. This option is useful if
159 if your SPL is extremely size constrained. Heed the warning, enable
160 this option if and only if you know exactly what you are doing, if
161 you are reading this help text, you most likely have no idea :-)
162
163 The MMC framework is reduced to bare minimum to be useful. No malloc
164 support is needed for the MMC framework operation with this option
165 enabled. The framework supports exactly one MMC device and exactly
166 one MMC driver. The MMC driver can be adjusted to avoid any malloc
167 operations too, which can remove the need for malloc support in SPL
168 and thus further reduce footprint.
169
Masahiro Yamada1d2c0502017-01-10 13:32:07 +0900170config MMC_DAVINCI
171 bool "TI DAVINCI Multimedia Card Interface support"
172 depends on ARCH_DAVINCI
173 default y
174 help
175 This selects the TI DAVINCI Multimedia card Interface.
176 If you have an DAVINCI board with a Multimedia Card slot,
177 say Y here. If unsure, say N.
178
Masahiro Yamada55ed3b42017-01-10 13:32:04 +0900179config MMC_DW
180 bool "Synopsys DesignWare Memory Card Interface"
Philipp Tomsich2acc24f2018-11-30 22:13:25 +0100181 select BOUNCE_BUFFER
Masahiro Yamada55ed3b42017-01-10 13:32:04 +0900182 help
183 This selects support for the Synopsys DesignWare Mobile Storage IP
184 block, this provides host support for SD and MMC interfaces, in both
185 PIO, internal DMA mode and external DMA mode.
186
Masahiro Yamadaae4c81e2017-01-10 13:32:05 +0900187config MMC_DW_EXYNOS
188 bool "Exynos specific extensions for Synopsys DW Memory Card Interface"
189 depends on ARCH_EXYNOS
190 depends on MMC_DW
191 default y
192 help
193 This selects support for Samsung Exynos SoC specific extensions to the
194 Synopsys DesignWare Memory Card Interface driver. Select this option
195 for platforms based on Exynos4 and Exynos5 SoC's.
196
197config MMC_DW_K3
198 bool "K3 specific extensions for Synopsys DW Memory Card Interface"
199 depends on MMC_DW
200 help
201 This selects support for Hisilicon K3 SoC specific extensions to the
202 Synopsys DesignWare Memory Card Interface driver. Select this option
203 for platforms based on Hisilicon K3 SoC's.
204
Masahiro Yamadafed44082017-01-10 13:32:03 +0900205config MMC_DW_ROCKCHIP
Simon Glassa8cb4fb2015-08-30 16:55:37 -0600206 bool "Rockchip SD/MMC controller support"
207 depends on DM_MMC && OF_CONTROL
Masahiro Yamada55ed3b42017-01-10 13:32:04 +0900208 depends on MMC_DW
Simon Glassa8cb4fb2015-08-30 16:55:37 -0600209 help
210 This enables support for the Rockchip SD/MMM controller, which is
211 based on Designware IP. The device is compatible with at least
212 SD 3.0, SDIO 3.0 and MMC 4.5 and supports common eMMC chips as well
213 as removeable SD and micro-SD cards.
214
Masahiro Yamadaae4c81e2017-01-10 13:32:05 +0900215config MMC_DW_SOCFPGA
216 bool "SOCFPGA specific extensions for Synopsys DW Memory Card Interface"
217 depends on ARCH_SOCFPGA
218 depends on MMC_DW
219 default y
220 help
221 This selects support for Altera SOCFPGA specific extensions to the
222 Synopsys DesignWare Memory Card Interface driver. Select this option
223 for platforms based on Altera SOCFPGA.
224
Carlo Caione93738622017-04-12 20:30:42 +0200225config MMC_MESON_GX
226 bool "Meson GX EMMC controller support"
Simon Glasse7881d82017-07-29 11:35:31 -0600227 depends on DM_MMC && BLK && ARCH_MESON
Carlo Caione93738622017-04-12 20:30:42 +0200228 help
229 Support for EMMC host controller on Meson GX ARM SoCs platform (S905)
230
Masahiro Yamada1d2c0502017-01-10 13:32:07 +0900231config MMC_MXC
232 bool "Freescale i.MX21/27/31 or MPC512x Multimedia Card support"
233 help
234 This selects the Freescale i.MX21, i.MX27, i.MX31 or MPC512x
235 Multimedia Card Interface. If you have an i.MX or MPC512x platform
236 with a Multimedia Card slot, say Y here.
237
238 If unsure, say N.
239
240config MMC_MXS
241 bool "Freescale MXS Multimedia Card Interface support"
Adam Ford99bec1a2018-02-06 08:34:45 -0600242 depends on MX23 || MX28 || MX6 || MX7
Philipp Tomsich2acc24f2018-11-30 22:13:25 +0100243 select BOUNCE_BUFFER
Adam Ford99bec1a2018-02-06 08:34:45 -0600244 select APBH_DMA
245 select APBH_DMA_BURST if ARCH_MX6 || ARCH_MX7
246 select APBH_DMA_BURST8 if ARCH_MX6 || ARCH_MX7
Masahiro Yamada1d2c0502017-01-10 13:32:07 +0900247 help
248 This selects the Freescale SSP MMC controller found on MXS based
249 platforms like mx23/28.
250
251 If unsure, say N.
252
Felipe Balbib706b1c2017-02-20 14:24:13 +0300253config MMC_PCI
254 bool "Support for MMC controllers on PCI"
255 help
256 This selects PCI-based MMC controllers.
257 If you have an MMC controller on a PCI bus, say Y here.
258
259 If unsure, say N.
260
Masahiro Yamada1d2c0502017-01-10 13:32:07 +0900261config MMC_OMAP_HS
262 bool "TI OMAP High Speed Multimedia Card Interface support"
Simon Glasse7881d82017-07-29 11:35:31 -0600263 select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR
Jean-Jacques Hiblot8ff77632017-09-21 17:03:10 +0200264 select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR
Masahiro Yamada1d2c0502017-01-10 13:32:07 +0900265 help
266 This selects the TI OMAP High Speed Multimedia card Interface.
267 If you have an omap2plus board with a Multimedia Card slot,
268 say Y here.
269
270 If unsure, say N.
271
Jean-Jacques Hiblot27a4b3b2018-02-23 10:40:18 +0100272config MMC_OMAP_HS_ADMA
273 bool "ADMA support for OMAP HS MMC"
274 depends on MMC_OMAP_HS && !OMAP34XX
275 default y if !AM33XX
276 help
277 This enables support for the ADMA2 controller (SDA3.00 Part A2 DMA
278 controller). If supported by the hardware, selecting this option will
279 increase performances.
280
Adam Ford6aca17c2017-02-06 11:31:43 -0600281config MMC_OMAP36XX_PINS
282 bool "Enable MMC1 on OMAP36xx/37xx"
283 depends on OMAP34XX && MMC_OMAP_HS
284 help
285 This enables extended-drain in the MMC/SD/SDIO1I/O and
286 GPIO-associated I/O cells (gpio_126, gpio_127, and gpio_129)
287 specific to the OMAP36xx/37xx using MMC1
288
289 If you have a controller with this interface, say Y here.
290
291 If unsure, say N.
292
Nobuhiro Iwamatsu72d42ba2014-12-17 08:03:00 +0900293config SH_SDHI
294 bool "SuperH/Renesas ARM SoCs on-chip SDHI host controller support"
Marek Vasut0f531182017-05-13 15:51:14 +0200295 depends on ARCH_RMOBILE
Nobuhiro Iwamatsu72d42ba2014-12-17 08:03:00 +0900296 help
297 Support for the on-chip SDHI host controller on SuperH/Renesas ARM SoCs platform
298
Marek Vasutf3dca4a2018-04-21 17:40:20 +0200299config SH_MMCIF
300 bool "SuperH/Renesas ARM SoCs on-chip MMCIF host controller support"
301 depends on ARCH_RMOBILE || SH
302 help
303 Support for the on-chip MMCIF host controller on SuperH/Renesas ARM SoCs platform
304
Masahiro Yamadaa111bfb2016-02-18 19:52:48 +0900305config MMC_UNIPHIER
Marek Vasut7dfddc02017-09-23 13:30:30 +0200306 bool "UniPhier SD/MMC Host Controller support"
307 depends on ARCH_UNIPHIER
Simon Glasse7881d82017-07-29 11:35:31 -0600308 depends on BLK && DM_MMC
Masahiro Yamada9c720c82016-12-30 23:20:14 +0900309 depends on OF_CONTROL
Masahiro Yamadaa111bfb2016-02-18 19:52:48 +0900310 help
Marek Vasutb24633d2017-07-21 23:24:36 +0200311 This selects support for the Matsushita SD/MMC Host Controller on
Marek Vasut7dfddc02017-09-23 13:30:30 +0200312 SocioNext UniPhier SoCs.
313
314config RENESAS_SDHI
315 bool "Renesas R-Car SD/MMC Host Controller support"
316 depends on ARCH_RMOBILE
317 depends on BLK && DM_MMC
318 depends on OF_CONTROL
319 help
320 This selects support for the Matsushita SD/MMC Host Controller on
321 Renesas R-Car SoCs.
Masahiro Yamadaa111bfb2016-02-18 19:52:48 +0900322
Alexander Grafc8a73a22018-01-23 18:05:22 +0100323config MMC_BCM2835
324 bool "BCM2835 family custom SD/MMC Host Controller support"
325 depends on ARCH_BCM283X
326 depends on BLK && DM_MMC
327 depends on OF_CONTROL
328 default y
329 help
330 This selects support for the custom SD host controller in the BCM2835
331 family of devices.
332
333 If you have a BCM2835 platform with SD or MMC devices, say Y here.
334
335 If unsure, say N.
336
Paul Burtond7727132018-12-16 19:25:20 -0300337config JZ47XX_MMC
338 bool "Ingenic JZ47xx SD/MMC Host Controller support"
339 depends on ARCH_JZ47XX
340 help
341 This selects support for the SD Card Controller on Ingenic JZ47xx SoCs.
342
Masahiro Yamadaa5995a52017-01-30 19:46:50 +0900343config MMC_SANDBOX
Simon Glassf376a3c2016-05-01 13:52:42 -0600344 bool "Sandbox MMC support"
Masahiro Yamadaa5995a52017-01-30 19:46:50 +0900345 depends on SANDBOX
Simon Glasse7881d82017-07-29 11:35:31 -0600346 depends on BLK && DM_MMC && OF_CONTROL
Simon Glassf376a3c2016-05-01 13:52:42 -0600347 help
348 This select a dummy sandbox MMC driver. At present this does nothing
349 other than allow sandbox to be build with MMC support. This
350 improves build coverage for sandbox and makes it easier to detect
351 MMC build errors with sandbox.
352
Masahiro Yamadae1ce61f2016-12-07 22:10:28 +0900353config MMC_SDHCI
354 bool "Secure Digital Host Controller Interface support"
355 help
356 This selects the generic Secure Digital Host Controller Interface.
357 It is used by manufacturers such as Texas Instruments(R), Ricoh(R)
358 and Toshiba(R). Most controllers found in laptops are of this type.
359
360 If you have a controller with this interface, say Y here.
361
362 If unsure, say N.
363
Masahiro Yamada3d3a74c2016-12-07 22:10:30 +0900364config MMC_SDHCI_IO_ACCESSORS
365 bool
366 depends on MMC_SDHCI
367 help
368 This is silent Kconfig symbol that is selected by the drivers that
369 need to overwrite SDHCI IO memory accessors.
370
Masahiro Yamada45a68fe2016-12-07 22:10:29 +0900371config MMC_SDHCI_SDMA
372 bool "Support SDHCI SDMA"
373 depends on MMC_SDHCI
374 help
375 This enables support for the SDMA (Single Operation DMA) defined
376 in the SD Host Controller Standard Specification Version 1.00 .
377
Masahiro Yamadadd3b64e2017-01-30 19:46:55 +0900378config MMC_SDHCI_ATMEL
379 bool "Atmel SDHCI controller support"
380 depends on ARCH_AT91
Simon Glasse7881d82017-07-29 11:35:31 -0600381 depends on DM_MMC && BLK && ARCH_AT91
Masahiro Yamadadd3b64e2017-01-30 19:46:55 +0900382 depends on MMC_SDHCI
383 help
384 This enables support for the Atmel SDHCI controller, which supports
385 the embedded MultiMedia Card (e.MMC) Specification V4.51, the SD
386 Memory Card Specification V3.0, and the SDIO V3.0 specification.
387 It is compliant with the SD Host Controller Standard V3.0
388 specification.
389
Masahiro Yamada45a68fe2016-12-07 22:10:29 +0900390config MMC_SDHCI_BCM2835
391 tristate "SDHCI support for the BCM2835 SD/MMC Controller"
392 depends on ARCH_BCM283X
393 depends on MMC_SDHCI
Masahiro Yamada3d3a74c2016-12-07 22:10:30 +0900394 select MMC_SDHCI_IO_ACCESSORS
Masahiro Yamada45a68fe2016-12-07 22:10:29 +0900395 help
396 This selects the BCM2835 SD/MMC controller.
397
398 If you have a BCM2835 platform with SD or MMC devices,
399 say Y here.
400
401 If unsure, say N.
402
Thomas Fitzsimmons894c3ad2018-06-08 17:59:45 -0400403config MMC_SDHCI_BCMSTB
404 tristate "SDHCI support for the BCMSTB SD/MMC Controller"
405 depends on MMC_SDHCI
406 help
407 This selects the Broadcom set-top box SD/MMC controller.
408
409 If you have a BCMSTB platform with SD or MMC devices,
410 say Y here.
411
412 If unsure, say N.
413
Masahiro Yamadae5e7a7c2016-12-30 22:41:46 +0900414config MMC_SDHCI_CADENCE
415 bool "SDHCI support for the Cadence SD/SDIO/eMMC controller"
Simon Glasse7881d82017-07-29 11:35:31 -0600416 depends on BLK && DM_MMC
Masahiro Yamadae5e7a7c2016-12-30 22:41:46 +0900417 depends on MMC_SDHCI
418 depends on OF_CONTROL
419 help
420 This selects the Cadence SD/SDIO/eMMC driver.
421
422 If you have a controller with this interface, say Y here.
423
424 If unsure, say N.
425
Lokesh Vutlaaaa449f2018-08-27 15:57:54 +0530426config MMC_SDHCI_K3_ARASAN
427 bool "Arasan SDHCI controller for TI's K3 based SoCs"
428 depends on ARCH_K3
429 depends on MMC_SDHCI
430 depends on DM_MMC && OF_CONTROL && BLK
431 help
432 Support for Arasan SDHCI host controller on Texas Instruments'
433 K3 family based SoC platforms
434
Masahiro Yamada45a68fe2016-12-07 22:10:29 +0900435config MMC_SDHCI_KONA
436 bool "SDHCI support on Broadcom KONA platform"
437 depends on MMC_SDHCI
438 help
439 This selects the Broadcom Kona Secure Digital Host Controller
440 Interface(SDHCI) support.
441 This is used in Broadcom mobile SoCs.
442
443 If you have a controller with this interface, say Y here.
444
Masahiro Yamada360c67d2017-01-30 19:46:53 +0900445config MMC_SDHCI_MSM
446 bool "Qualcomm SDHCI controller"
Simon Glasse7881d82017-07-29 11:35:31 -0600447 depends on BLK && DM_MMC
Masahiro Yamada360c67d2017-01-30 19:46:53 +0900448 depends on MMC_SDHCI
449 help
450 Enables support for SDHCI 2.0 controller present on some Qualcomm
451 Snapdragon devices. This device is compatible with eMMC v4.5 and
452 SD 3.0 specifications. Both SD and eMMC devices are supported.
453 Card-detect gpios are not supported.
454
Masahiro Yamada45a68fe2016-12-07 22:10:29 +0900455config MMC_SDHCI_MV
456 bool "SDHCI support on Marvell platform"
457 depends on ARCH_MVEBU
458 depends on MMC_SDHCI
459 help
460 This selects the Secure Digital Host Controller Interface on
461 Marvell platform.
462
463 If you have a controller with this interface, say Y here.
464
465 If unsure, say N.
466
Masahiro Yamada1b858772017-01-30 19:46:54 +0900467config MMC_SDHCI_PIC32
468 bool "Microchip PIC32 on-chip SDHCI support"
469 depends on DM_MMC && MACH_PIC32
470 depends on MMC_SDHCI
471 help
472 Support for Microchip PIC32 SDHCI controller.
473
Masahiro Yamadafacc8052017-01-30 19:46:52 +0900474config MMC_SDHCI_ROCKCHIP
475 bool "Arasan SDHCI controller for Rockchip support"
476 depends on ARCH_ROCKCHIP
Simon Glasse7881d82017-07-29 11:35:31 -0600477 depends on DM_MMC && BLK
Masahiro Yamadafacc8052017-01-30 19:46:52 +0900478 depends on MMC_SDHCI
479 help
480 Support for Arasan SDHCI host controller on Rockchip ARM SoCs platform
481
Masahiro Yamada45a68fe2016-12-07 22:10:29 +0900482config MMC_SDHCI_S5P
483 bool "SDHCI support on Samsung S5P SoC"
484 depends on MMC_SDHCI
485 help
486 This selects the Secure Digital Host Controller Interface (SDHCI)
487 on Samsung S5P SoCs.
488
489 If you have a controller with this interface, say Y here.
490
491 If unsure, say N.
492
493config MMC_SDHCI_SPEAR
494 bool "SDHCI support on ST SPEAr platform"
495 depends on MMC_SDHCI
496 help
497 This selects the Secure Digital Host Controller Interface (SDHCI)
498 often referrered to as the HSMMC block in some of the ST SPEAR range
499 of SoC
500
501 If you have a controller with this interface, say Y here.
502
503 If unsure, say N.
504
Patrice Chotardeee20f82017-02-21 13:37:09 +0100505config MMC_SDHCI_STI
506 bool "SDHCI support for STMicroelectronics SoC"
Patrice Chotard51cb23d2017-02-21 13:37:11 +0100507 depends on MMC_SDHCI && OF_CONTROL
Patrice Chotardeee20f82017-02-21 13:37:09 +0100508 help
509 This selects the Secure Digital Host Controller Interface (SDHCI)
510 on STMicroelectronics STiH410 SoC.
511
Stefan Roeseb6acb5f2016-12-09 15:03:28 +0100512config MMC_SDHCI_XENON
513 bool "SDHCI support for the Xenon SDHCI controller"
514 depends on MMC_SDHCI && DM_MMC && OF_CONTROL
515 help
516 Support for Xenon SDHCI host controller on Marvell Armada 3700
517 7k/8k ARM SoCs platforms
518
519 If you have a controller with this interface, say Y here.
520
521 If unsure, say N.
522
Felipe Balbi83b32482017-02-20 14:24:14 +0300523config MMC_SDHCI_TANGIER
524 bool "Tangier SDHCI controller support"
525 depends on DM_MMC && BLK
526 depends on MMC_SDHCI
527 help
528 This selects support for SDHCI controller on Tanginer
529 SoC. Note that this controller does not sit on PCI bus and,
530 hence, cannot be enumerated by standard PCI means.
531
532 If you're using an Intel Tangier SoC (available on Intel
533 Edison board), say Y here.
534
535 If unsure, say N.
536
Masahiro Yamada1d2c0502017-01-10 13:32:07 +0900537config MMC_SDHCI_TEGRA
538 bool "SDHCI platform support for the Tegra SD/MMC Controller"
539 depends on TEGRA
Philipp Tomsich2acc24f2018-11-30 22:13:25 +0100540 select BOUNCE_BUFFER
Masahiro Yamada1d2c0502017-01-10 13:32:07 +0900541 default y
542 help
543 This selects the Tegra SD/MMC controller. If you have a Tegra
544 platform with SD or MMC devices, say Y here.
545
546 If unsure, say N.
547
Masahiro Yamada08aa0332017-01-30 19:46:51 +0900548config MMC_SDHCI_ZYNQ
549 bool "Arasan SDHCI controller support"
Michal Simekec48b6c2018-08-22 14:55:27 +0200550 depends on ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL
Simon Glasse7881d82017-07-29 11:35:31 -0600551 depends on DM_MMC && OF_CONTROL && BLK
Masahiro Yamada08aa0332017-01-30 19:46:51 +0900552 depends on MMC_SDHCI
553 help
554 Support for Arasan SDHCI host controller on Zynq/ZynqMP ARM SoCs platform
555
Vipul Kumar5dc5a532018-02-28 15:53:28 +0530556config ZYNQ_SDHCI_MAX_FREQ
557 int "Set the maximum frequency of the controller"
558 depends on MMC_SDHCI_ZYNQ
559 help
560 Set the maximum frequency of the controller.
561
Vipul Kumar3ccc2072018-02-28 15:53:29 +0530562config ZYNQ_SDHCI_MIN_FREQ
563 int "Set the minimum frequency of the controller"
564 depends on MMC_SDHCI_ZYNQ
565 default 0
566 help
567 Set the minimum frequency of the controller.
568
Masahiro Yamada1d2c0502017-01-10 13:32:07 +0900569config MMC_SUNXI
570 bool "Allwinner sunxi SD/MMC Host Controller support"
Masahiro Yamada0ad178c2017-01-12 12:16:15 +0900571 depends on ARCH_SUNXI && !UART0_PORT_F
Masahiro Yamada1d2c0502017-01-10 13:32:07 +0900572 default y
573 help
574 This selects support for the SD/MMC Host Controller on
575 Allwinner sunxi SoCs.
576
Maxime Ripardde9b1772017-08-23 12:03:41 +0200577config MMC_SUNXI_HAS_NEW_MODE
578 bool
579 depends on MMC_SUNXI
580
Vasily Khoruzhick2a8882e2018-11-09 20:41:44 -0800581config MMC_SUNXI_HAS_MODE_SWITCH
582 bool
583 depends on MMC_SUNXI
584
Wenyou Yangc86c0152017-04-13 10:29:22 +0800585config GENERIC_ATMEL_MCI
586 bool "Atmel Multimedia Card Interface support"
Simon Glasse7881d82017-07-29 11:35:31 -0600587 depends on DM_MMC && BLK && ARCH_AT91
Wenyou Yangc86c0152017-04-13 10:29:22 +0800588 help
589 This enables support for Atmel High Speed Multimedia Card Interface
590 (HSMCI), which supports the MultiMedia Card (MMC) Specification V4.3,
591 the SD Memory Card Specification V2.0, the SDIO V2.0 specification
592 and CE-ATA V1.1.
593
Patrice Chotardb312c592017-09-04 17:56:22 +0200594config STM32_SDMMC2
595 bool "STMicroelectronics STM32H7 SD/MMC Host Controller support"
Patrice Chotard53c656a2017-10-03 15:54:58 +0200596 depends on DM_MMC && BLK && OF_CONTROL
Patrice Chotardb312c592017-09-04 17:56:22 +0200597 help
598 This selects support for the SD/MMC controller on STM32H7 SoCs.
599 If you have a board based on such a SoC and with a SD/MMC slot,
600 say Y or M here.
601
Rick Chen9f678ab2017-11-14 14:47:09 +0800602config FTSDC010
603 bool "Ftsdc010 SD/MMC controller Support"
604 help
605 This SD/MMC controller is present in Andestech SoCs which is based on Faraday IP.
606
Rick Chen095c9f32018-03-20 15:10:49 +0800607config FTSDC010_SDIO
608 bool "Support ftsdc010 sdio"
609 default n
610 depends on FTSDC010
611 help
612 This can enable ftsdc010 sdio function.
613
Weijie Gaod24b6932018-11-15 10:08:04 +0800614config MMC_MTK
615 bool "MediaTek SD/MMC Card Interface support"
616 depends on ARCH_MEDIATEK
617 depends on BLK && DM_MMC
618 depends on OF_CONTROL
619 help
620 This selects the MediaTek(R) Secure digital and Multimedia card Interface.
621 If you have a machine with a integrated SD/MMC card reader, say Y or M here.
622 This is needed if support for any SD/SDIO/MMC devices is required.
623 If unsure, say N.
624
Masahiro Yamadae298c462016-12-07 22:10:27 +0900625endif
626
Marcel Ziswiler4119b702017-03-25 01:18:22 +0100627config TEGRA124_MMC_DISABLE_EXT_LOOPBACK
628 bool "Disable external clock loopback"
629 depends on MMC_SDHCI_TEGRA && TEGRA124
630 help
631 Disable the external clock loopback and use the internal one on SDMMC3
632 as per the SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 bits
633 being set to 0xfffd according to the TRM.
634
635 TODO(marcel.ziswiler@toradex.com): Move to device tree controlled
636 approach once proper kernel integration made it mainline.
637
Mario Six07dea2e2018-03-28 14:38:19 +0200638config FSL_ESDHC
639 bool "Freescale/NXP eSDHC controller support"
640 help
641 This selects support for the eSDHC (enhanced secure digital host
642 controller) found on numerous Freescale/NXP SoCs.
643
Nobuhiro Iwamatsu72d42ba2014-12-17 08:03:00 +0900644endmenu
York Sunc01e4a12016-12-28 08:43:42 -0800645
646config SYS_FSL_ERRATUM_ESDHC111
647 bool
648
649config SYS_FSL_ERRATUM_ESDHC13
650 bool
651
652config SYS_FSL_ERRATUM_ESDHC135
653 bool
654
655config SYS_FSL_ERRATUM_ESDHC_A001
656 bool