blob: 07c21cb0a2de0202a87f39f64dc8c2a500b67e5e [file] [log] [blame]
Jagan Tekia5b9f8c2016-12-13 17:56:52 +01001/*
2 * Copyright (C) 2016 Amarula Solutions B.V.
3 * Copyright (C) 2016 Engicam S.r.l.
4 *
5 * This file is dual-licensed: you can use it either under the terms
6 * of the GPL or the X11 license, at your option. Note that this dual
7 * licensing only applies to this file, and not this project as a
8 * whole.
9 *
10 * a) This file is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License
12 * version 2 as published by the Free Software Foundation.
13 *
14 * This file is distributed in the hope that it will be useful
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * Or, alternatively
20 *
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
28 * conditions:
29 *
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
32 *
33 * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44
45#include <dt-bindings/gpio/gpio.h>
46#include <dt-bindings/input/input.h>
47#include "imx6ul.dtsi"
48
49/ {
50 model = "Engicam GEAM6UL";
51 compatible = "engicam,imx6ul-geam", "fsl,imx6ul";
52
53 memory {
54 reg = <0x80000000 0x08000000>;
55 };
56
57 chosen {
58 stdout-path = &uart1;
59 };
60};
61
Jagan Tekib443c882016-12-13 17:57:03 +010062&fec1 {
63 pinctrl-names = "default";
64 pinctrl-0 = <&pinctrl_enet1>;
65 phy-mode = "rmii";
66 status = "okay";
67};
68
Jagan Teki6116da92016-12-13 17:56:53 +010069&i2c1 {
70 clock-frequency = <100000>;
71 pinctrl-names = "default";
72 pinctrl-0 = <&pinctrl_i2c1>;
73 status = "okay";
74};
75
76&i2c2 {
77 clock_frequency = <100000>;
78 pinctrl-names = "default";
79 pinctrl-0 = <&pinctrl_i2c2>;
80 status = "okay";
81};
82
Jagan Tekia5b9f8c2016-12-13 17:56:52 +010083&uart1 {
84 pinctrl-names = "default";
85 pinctrl-0 = <&pinctrl_uart1>;
86 status = "okay";
87};
88
89&usdhc1 {
90 pinctrl-names = "default", "state_100mhz", "state_200mhz";
91 pinctrl-0 = <&pinctrl_usdhc1>;
92 pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
93 pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
94 bus-width = <4>;
95 cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
96 no-1-8-v;
97 status = "okay";
98};
99
100&iomuxc {
Jagan Tekib443c882016-12-13 17:57:03 +0100101 pinctrl_enet1: enet1grp {
102 fsl,pins = <
103 MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0
104 MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0
105 MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0
106 MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
107 MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
108 MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
109 MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
110 MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
111 MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031
112 >;
113 };
114
Jagan Teki6116da92016-12-13 17:56:53 +0100115 pinctrl_i2c1: i2c1grp {
116 fsl,pins = <
117 MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
118 MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
119 >;
120 };
121
122 pinctrl_i2c2: i2c2grp {
123 fsl,pins = <
124 MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
125 MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
126 >;
127 };
128
Jagan Tekia5b9f8c2016-12-13 17:56:52 +0100129 pinctrl_uart1: uart1grp {
130 fsl,pins = <
131 MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
132 MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
133 >;
134 };
135
136 pinctrl_usdhc1: usdhc1grp {
137 fsl,pins = <
138 MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
139 MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
140 MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
141 MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
142 MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
143 MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
144 >;
145 };
146
147 pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
148 fsl,pins = <
149 MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9
150 MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9
151 MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
152 MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
153 MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
154 MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
155 >;
156 };
157
158 pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
159 fsl,pins = <
160 MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9
161 MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9
162 MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
163 MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
164 MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
165 MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
166 >;
167 };
168};