Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 9e8e927023582231b034e199568e49f84ac032a9 / . / doc / README.alaska8220
blob: 0bd68d9628b8a203729cb85dbd9b82846519e065 [file] [log] [blame]
wdenk983fda82004-10-28 00:09:35 +0000[diff] [blame]1Freescale Alaska MPC8220 board
2==============================
3
4TsiChung Liew(Tsi-Chung.Liew@freescale.com)
5Created 9/21/04
6===========================================
7
8
9Changed files:
10==============
11
12- Makefile added MPC8220 and Alaska8220_config
13- MAKEALL added MPC8220 and Alaska8220
14- README added CONFIG_MPC8220, Alaska8220_config
15
16- common/cmd_bdinfo.c added board information members for MPC8220
17- common/cmd_bootm.c added clocks for MPC8220 in do_bootm_linux()
18
19- include/common.h added CONFIG_MPC8220
20
21- include/asm-ppc/u-boot.h added board information members for MPC8220
22- include/asm-ppc/global_data.h added global variables - inp_clk, pci_clk,
23 vco_clk, pev_clk, flb_clk, and bExtUart
24
25- lib_ppc/board.c added CONFIG_MPC8220 support
26
27- net/eth.c added FEC support for MPC8220
28
29Added files:
30============
31- board/alaska directory for Alaska MPC8220
32- board/alaska/alaska.c Alaska dram and BATs setup
33- board/alaska/extserial.c external serial (debug card serial) support
34- board/alaska/flash.c Socket (AMD) and Onboard (INTEL) flash support
35- board/alaska/serial.c to determine which int/ext serial to use
36- board/alaska/Makefile Makefile
37- board/alaska/config.mk config make
38- board/alaska/u-boot.lds Linker description
39
40- cpu/mpc8220/dma.h multi-channel dma header file
41- cpu/mpc8220/dramSetup.h dram setup header file
42- cpu/mpc8220/fec.h MPC8220 FEC header file
43- cpu/mpc8220/cpu.c cpu specific code
44- cpu/mpc8220/cpu_init.c Flexbus ChipSelect and Mux pins setup
45- cpu/mpc8220/dramSetup.c MPC8220 DDR SDRAM setup
46- cpu/mpc8220/fec.c MPC8220 FEC driver
47- cpu/mpc8220/i2c.c MPC8220 I2C driver
48- cpu/mpc8220/interrupts.c interrupt support (not enable)
49- cpu/mpc8220/loadtask.c load dma
50- cpu/mpc8220/speed.c system, pci, flexbus, pev, and cpu clock
51- cpu/mpc8220/traps.c exception
52- cpu/mpc8220/uart.c MPC8220 UART driver
53- cpu/mpc8220/Makefile Makefile
54- cpu/mpc8220/config.mk config make
55- cpu/mpc8220/fec_dma_task.S MPC8220 FEC multi-channel dma program
56- cpu/mpc8220/io.S io functions
57- cpu/mpc8220/start.S start up
58
59- include/mpc8220.h
60
61- include/asm-ppc/immap_8220.h
62
63- include/configs/Alaska8220.h
64
65
661. SWITCH SETTINGS
67==================
681.1 SW1: 0 - Boot from Socket Flash (AMD) or 1 - Onboard Flash (INTEL)
69 SW2: 0 - Select MPC8220 UART or 1 - Debug Card UART
70 SW3: unsed
71 SW4: 0 - 1284 or 1 - FEC1
72 SW5: 0 - PEV or 1 - FEC2
73
74
752. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
76===========================================
772.1. For the initial bringup, we adopted a consistent memory scheme between u-boot and
78 linux kernel, you can customize it based on your system requirements:
79 DDR: 0x00000000-0x1fffffff (max 512MB)
80 MBAR: 0xf0000000-0xf0027fff (128KB)
81 CPLD: 0xf1000000-0xf103ffff (256KB)
82 FPGA: 0xf2000000-0xf203ffff (256KB)
83 Flash: 0xfe000000-0xffffffff (max 32MB)
84
853. DEFINITIONS AND COMPILATION
86==============================
873.1 Explanation on NEW definitions in include/configs/alaska8220.h
88 CONFIG_MPC8220 MPC8220 specific
89 CONFIG_ALASKA8220 Alaska board specific
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200[diff] [blame]90 CONFIG_SYS_MPC8220_CLKIN Define Alaska Input Clock
wdenk983fda82004-10-28 00:09:35 +0000[diff] [blame]91 CONFIG_PSC_CONSOLE Enable MPC8220 UART
92 CONFIG_EXTUART_CONSOLE Enable External 16552 UART
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200[diff] [blame]93 CONFIG_SYS_AMD_BOOT To determine the u-boot is booted from AMD or Intel
94 CONFIG_SYS_MBAR MBAR base address
95 CONFIG_SYS_DEFAULT_MBAR Reset MBAR base address
wdenk983fda82004-10-28 00:09:35 +0000[diff] [blame]96
973.2 Compilation
98 export CROSS_COMPILE=cross-compile-prefix
99 cd u-boot-1-1-x
100 make distclean
101 make Alaska8220_config
102 make
103
104
1054. SCREEN DUMP
106==============
1074.1 Alaska MPC8220 board
108 Boot from AMD (NOTE: May not show exactly the same)
109
110U-Boot 1.1.1 (Sep 22 2004 - 22:14:41)
111
112CPU: MPC8220 (JTAG ID 1640301d) at 300 MHz
113 Bus 120 MHz, CPU 300 MHz, PCI 30 MHz, VCO 480 MHz
114Board: Alaska MPC8220 Evaluation Board
115I2C: 93 kHz, ready
116DRAM: 256 MB
117Reserving 167k for U-Boot at: 0ffd6000
118FLASH: 16.5 MB
119*** Warning - bad CRC, using default environment
120
121In: serial
122Out: serial
123Err: serial
124Net: FEC ETHERNET
125=> flinfo
126
127Bank # 1: INTEL 28F128J3A
128 Size: 8 MB in 64 Sectors
129 Sector Start Addresses:
130 FE000000 FE020000 FE040000 FE060000 FE080000
131 FE0A0000 FE0C0000 FE0E0000 FE100000 FE120000
132 FE140000 FE160000 FE180000 FE1A0000 FE1C0000
133 FE1E0000 FE200000 FE220000 FE240000 FE260000
134 FE280000 FE2A0000 FE2C0000 FE2E0000 FE300000
135 FE320000 FE340000 FE360000 FE380000 FE3A0000
136 FE3C0000 FE3E0000 FE400000 FE420000 FE440000
137 FE460000 FE480000 FE4A0000 FE4C0000 FE4E0000
138 FE500000 FE520000 FE540000 FE560000 FE580000
139 FE5A0000 FE5C0000 FE5E0000 FE600000 FE620000
140 FE640000 FE660000 FE680000 FE6A0000 FE6C0000
141 FE6E0000 FE700000 FE720000 FE740000 FE760000
142 FE780000 FE7A0000 FE7C0000 FE7E0000
143
144Bank # 2: INTEL 28F128J3A
145 Size: 8 MB in 64 Sectors
146 Sector Start Addresses:
147 FE800000 FE820000 FE840000 FE860000 FE880000
148 FE8A0000 FE8C0000 FE8E0000 FE900000 FE920000
149 FE940000 FE960000 FE980000 FE9A0000 FE9C0000
150 FE9E0000 FEA00000 FEA20000 FEA40000 FEA60000
151 FEA80000 FEAA0000 FEAC0000 FEAE0000 FEB00000
152 FEB20000 FEB40000 FEB60000 FEB80000 FEBA0000
153 FEBC0000 FEBE0000 FEC00000 FEC20000 FEC40000
154 FEC60000 FEC80000 FECA0000 FECC0000 FECE0000
155 FED00000 FED20000 FED40000 FED60000 FED80000
156 FEDA0000 FEDC0000 FEDE0000 FEE00000 FEE20000
157 FEE40000 FEE60000 FEE80000 FEEA0000 FEEC0000
158 FEEE0000 FEF00000 (RO) FEF20000 (RO) FEF40000 FEF60000
159 FEF80000 FEFA0000 FEFC0000 FEFE0000 (RO)
160
161Bank # 3: AMD AMD29F040B
162 Size: 0 MB in 7 Sectors
163 Sector Start Addresses:
164 FFF00000 (RO) FFF10000 (RO) FFF20000 (RO) FFF30000 FFF40000
165 FFF50000 FFF60000
166
167Bank # 4: AMD AMD29F040B
168 Size: 0 MB in 1 Sectors
169 Sector Start Addresses:
170 FFF70000 (RO)
171=> bdinfo
172
173memstart = 0xF0009800
174memsize = 0x10000000
175flashstart = 0xFFF00000
176flashsize = 0x01080000
177flashoffset = 0x00025000
178sramstart = 0xF0020000
179sramsize = 0x00008000
180bootflags = 0x00000001
181intfreq = 300 MHz
182busfreq = 120 MHz
183inpfreq = 30 MHz
184flbfreq = 30 MHz
185pcifreq = 30 MHz
186vcofreq = 480 MHz
187pevfreq = 81 MHz
188ethaddr = 00:E0:0C:BC:E0:60
189eth1addr = 00:E0:0C:BC:E0:61
190IP addr = 192.162.1.2
191baudrate = 115200 bps
192=> printenv
193bootargs=root=/dev/ram rw
194bootdelay=5
195baudrate=115200
196ethaddr=00:e0:0c:bc:e0:60
197eth1addr=00:e0:0c:bc:e0:61
198ipaddr=192.162.1.2
199serverip=192.162.1.1
200gatewayip=192.162.1.1
201netmask=255.255.255.0
202hostname=Alaska
203stdin=serial
204stdout=serial
205stderr=serial
206ethact=FEC ETHERNET
207
208Environment size: 268/65532 bytes
209=> setenv ipaddr 192.160.1.2
210=> setenv serverip 192.160.1.1
211=> setenv gatewayip 192.160.1.1
212=> saveenv
213Saving Environment to Flash...
214
215.
216Un-Protected 1 sectors
217Erasing Flash...
218Erasing sector 0 ... done
219Erased 1 sectors
220Writing to Flash... done
221
222.
223Protected 1 sectors
224=> tftp 0x10000 linux.elf
225Using FEC ETHERNET device
226TFTP from server 192.160.1.1; our IP address is 192.160.1.2; sending through gateway 192.160.1.1
227Filename 'linux.elf'.
228Load address: 0x10000
229Loading: invalid RARP header
230#################################################################
231 #################################################################
232 #################################################################
233 #################################################################
234 #################################################################
235 #################################################################
236 #################################################################
237 #################################################################
238 ##################################################
239done
240Bytes transferred = 2917494 (2c8476 hex)
241=> bootelf
242Loading .text @ 0x00a00000 (23820 bytes)
243Loading .data @ 0x00a06000 (2752512 bytes)
244Clearing .bss @ 0x00ca6000 (12764 bytes)
245## Starting application at 0x00a00000 ...
246
247Collect some entropy from RAM........done
248loaded at: 00A00000 00CA91DC
249zimage at: 00A06A93 00AD7756
250initrd at: 00AD8000 00CA5565
251avail ram: 00CAA000 014AA000
252
253Linux/PPC load: ip=off console=ttyS0,115200
254Uncompressing Linux...done.
255Now booting the kernel
256Total memory in system: 256 MB
257Memory BAT mapping: BAT2=256Mb, BAT3=0Mb, residual: 0Mb
258Linux version 2.4.21-rc1 (r61688@bluesocks.sps.mot.com) (gcc version 3.3.1) #17 Wed Sep 8 11:49:16 CDT 2004
259Motorola Alaska port (C) 2003 Motorola, Inc.
260CPLD rev 3
261CPLD switches 0x1b
262Set Pin Mux for FEC1
263Set Pin Mux for FEC2
264Alaska Pin Multiplexing:
265Port Configuration Register 0 = 0
266Port Configuration Register 1 = 0
267Port Configuration Register 2 = 0
268Port Configuration Register 3 = 50000000
269Port Configuration Register 3 - PCI = 51400180
270Setup Alaska FPGA PIC:
271Interrupt Enable Register *(u32) = 0
272Interrupt Status Register = 2f0000
273Interrupt Enable Register in_be32 = 0
274Interrupt Status Register = 2f0000
275Interrupt Enable Register in_le32 = 0
276Interrupt Status Register = 2f00
277Interrupt Enable Register readl = 0
278Interrupt Status Register = 2f00
279Interrupt Enable Register = 0
280Interrupt Status Register = 2f0000
281Setup Alaska PCI Controller:
282On node 0 totalpages: 65536
283zone(0): 65536 pages.
284zone(1): 0 pages.
285zone(2): 0 pages.
286Kernel command line: ip=off console=ttyS0,115200
287Using XLB clock (120.00 MHz) to set up decrementer
288Calibrating delay loop... 199.88 BogoMIPS
289Memory: 254792k available (1476k kernel code, 708k data, 228k init, 0k highmem)
290Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
291Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
292Mount cache hash table entries: 512 (order: 0, 4096 bytes)
293Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
294Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
295POSIX conformance testing by UNIFIX
296PCI: Probing PCI hardware
297PCI: (pcibios_init) Global-Hose = 0xc029d000
298Scanning bus 00
299Fixups for bus 00
300Bus scan for 00 returning with max=00
301PCI: (pcibios_init) finished pci_scan_bus(hose->first_busno = 0, hose->ops = c01a1a74, hose = c029d000)
302PCI: (pcibios_init) PCI Bus Count = 0 =?= Next Bus# = 1
303PCI: (pcibios_init@pci_fixup_irqs) finished machine dependent PCI interrupt routing!
304PCI: bridge rsrc 81000000..81ffffff (100), parent c01a7f88
305PCI: bridge rsrc 84000000..87ffffff (200), parent c01a7fa4
306PCI: (pcibios_init) finished allocating and assigning resources!
307initDma!
308Using 90 DMA buffer descriptors
309descUsed f0023600, descriptors f002360c freeSram f0024140
310unmask SDMA tasks: 0xf0008018 = 0x6f000000
311Linux NET4.0 for Linux 2.4
312Based upon Swansea University Computer Society NET3.039
313Initializing RT netlink socket
314Starting kswapd
315Journalled Block Device driver loaded
316JFFS version 1.0, (C) 1999, 2000 Axis Communications AB
317JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
318pty: 256 Unix98 ptys configured
319tracek: Copyright (C) Motorola, 2003.
320Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
321ttyS00 at 0xf1001008 (irq = 73) is a ST16650
322ttyS01 at 0xf1001010 (irq = 74) is a ST16650
323elp-fpanel: Copyright (C) Motorola, 2003.
324fpanel: fpanelWait timeout
325elp-engine: Copyright (C) Motorola, 2003.
326Video disabled due to configuration switch 4
327Alpine 1284 driver: Copyright (C) Motorola, 2003.
3281284 disabled due to configuration switch 5
329Alpine USB driver: Copyright (C) Motorola, 2003.
330OK
331USB: Descriptor download completed OK
332enable_irq(41) unbalanced
333enable_irq(75) unbalanced
334elp-dmaram: Copyright (C) Motorola, 2003.
335Total memory in system: 256 MB
336elp_dmaram: offset is 0x10000000, size is 0
337Xicor NVRAM driver: Copyright (C) Motorola, 2003.
338elp-video: Copyright (C) Motorola, 2003.
339Video disabled due to configuration switch 4
340elp-pfm: Copyright (C) Motorola, 2003.
341paddle: Copyright (C) Motorola, 2001, present.
342RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize
343loop: loaded (max 8 devices)
344PPP generic driver version 2.4.2
345PPP Deflate Compression module registered
346Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
347ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
348init_alaska_mtd: chip probing count 0
349cfi_cmdset_0001: Erase suspend on write enabled
350Using buffer write method
351init_alaska_mtd: bank1, name:ALASKA0, size:16777216bytes
352ALASKA flash0: Using Static image partition definition
353Creating 3 MTD partitions on "ALASKA0":
3540x00000000-0x00280000 : "kernel"
3550x00280000-0x00fe0000 : "user"
3560x00fe0000-0x01000000 : "signature"
357mgt_fec_module_init
358mgt_fec_init()
359mgt_fec_init
360mgt_init_fec_dev(0xc05f6000,0)
361dev c05f6000 fec_priv c05f6160 fec f0009000
362mgt_init_fec_dev(0xc05f6800,1)
363dev c05f6800 fec_priv c05f6960 fec f0009800
364NET4: Linux TCP/IP 1.0 for NET4.0
365IP Protocols: ICMP, UDP, TCP, IGMP
366IP: routing cache hash table of 2048 buckets, 16Kbytes
367TCP: Hash tables configured (established 16384 bind 32768)
368NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
369RAMDISK: Compressed image found at block 0
370Freeing initrd memory: 1845k freed
371JFFS: Trying to mount a non-mtd device.
372VFS: Mounted root (romfs filesystem) readonly.
373Freeing unused kernel memory: 228k init
374INIT: version 2.78 booting
375INIT: Entering runlevel: 1
376"Space, a great big place of unknown stuff." -Dexter, for our MotD.
377[01/Jan/1970:00:00:01 +0000] boa: server version Boa/0.94.8.3
378[01/Jan/1970:00:00:01 +0000] boa: server built Sep 7 2004 at 17:40:55.
379[01/Jan/1970:00:00:01 +0000] boa: starting server pid=28, port 80
380Mounting flash filesystem, will take a minute...
381/etc/rc: line 30: /dev/lp0: No such devish-2.05b#
382sh-2.05b# ifup eth0
383client (v0.9.9-pre) started
384adapter index 2
385adapter hardware address 00:e0:0c:bc:e0:60
386execle'ing /usr/share/udhcpc/default.script
387/sbin/ifconfig eth0
388eth0 Link encap:Ethernet HWaddr 00:E0:0C:BC:E0:60
389 BROADCAST MULTICAST MTU:1500 Metric:1
390 mgt_fec_open
391 Rfec request irq
392X fec_open: rcv_ring_size 8, xmt_ring_size 8
393packmgt_fec_open(): call netif_start_queue()
394ets:0 errors:0 dropped:0 overruns:0 frame:0
395 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
396 collisions:0 txqueuelen:100
397 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
398 Base address:0x9000
399
400/sbin/ifconfig eth0 up
401entering raw listen mode
402Opening raw socket on ifindex 2
403adding option 0x35
404adding option 0x3d
405adding option 0x3c
406Sending discover...
407Waiting on select...
408unrelated/bogus packet
409Waiting on select...
410oooooh!!! got some!
411adding option 0x35
412adding option 0x3d
413adding option 0x3c
414adding option 0x32
415adding option 0x36
416Sending select for 163.12.48.146...
417Waiting on select...
418oooooh!!! got some!
419Waiting on select...
420oooooh!!! got some!
421Lease of 163.12.48.146 obtained, lease time 345600
422execle'ing /usr/share/udhcpc/default.script
423/sbin/ifconfig eth0 163.12.48.146 netmask 255.255.254.0
424/sbin/ifconfig eth0 up
425deleting routers
426/sbin/route del default
427/sbin/route add default gw 163.12.49.254 dev eth0
428adding dns 163.12.252.230
429adding dns 192.55.22.4
430adding dns 192.5.249.4
431entering none listen mode
432sh-2.05b#
433
4345. REPROGRAM U-BOOT
435===================
4365.1 Reprogram u-boot (boot from AMD)
437 1. Unprotect the boot sector
438 => protect off bank 3
439 2. Download new u-boot binary file
440 => tftp 0x10000 u-boot.bin
441 3. Erase bootsector (max 7 sectors)
442 => erase 0xfff00000 0xfff6ffff
443 4. Program the u-boot to flash
444 => cp.b 0x10000 0xfff00000
445 5. Reset for the new u-boot to take place
446 => reset
447
4485.2 Reprogram u-boot (boot from AMD program at INTEL)
449 1. Unprotect the boot sector
450 => protect off bank 2
451 2. Download new u-boot binary file
452 => tftp 0x10000 u-boot.bin
453 3. Erase bootsector (max 7 sectors)
454 => erase 0xfef00000 0xfefdffff
455 4. Program the u-boot to flash
456 => cp.b 0x10000 0xfef00000
457 5. Reset for the new u-boot to take place
458 => reset
459
4605.3 Reprogram u-boot (boot from INTEL)
461 1. Unprotect the boot sector
462 => protect off bank 4
463 2. Download new u-boot binary file
464 => tftp 0x10000 u-boot.bin
465 3. Erase bootsector (max 7 sectors)
466 => erase 0xfff00000 0xfffdffff
467 4. Program the u-boot to flash
468 => cp.b 0x10000 0xfff00000
469 5. Reset for the new u-boot to take place
470 => reset
471
4725.4 Reprogram u-boot (boot from INTEL program at AMD)
473 1. Unprotect the boot sector
474 => protect off bank 1
475 2. Download new u-boot binary file
476 => tftp 0x10000 u-boot.bin
477 3. Erase bootsector (max 7 sectors)
478 => erase 0xfe080000 0xfe0effff
479 4. Program the u-boot to flash
480 => cp.b 0x10000 0xfe080000
481 5. Reset for the new u-boot to take place
482 => reset