| Meenakshi Aggarwal | 9ed303d | 2020-12-04 20:17:28 +0530 | [diff] [blame^] | 1 | /* SPDX-License-Identifier: GPL-2.0+ */ |
| 2 | /* |
| 3 | * Copyright 2020 NXP |
| 4 | */ |
| 5 | |
| 6 | #ifndef __LX2162_QDS_H |
| 7 | #define __LX2162_QDS_H |
| 8 | |
| 9 | #include "lx2160a_common.h" |
| 10 | |
| 11 | /* USB */ |
| 12 | #undef CONFIG_USB_MAX_CONTROLLER_COUNT |
| 13 | #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 |
| 14 | |
| 15 | /* Voltage monitor on channel 2*/ |
| 16 | #define CONFIG_VID_FLS_ENV "lx2162aqds_vdd_mv" |
| 17 | #define CONFIG_VID |
| 18 | #define CONFIG_VOL_MONITOR_LTC3882_SET |
| 19 | #define CONFIG_VOL_MONITOR_LTC3882_READ |
| 20 | |
| 21 | /* RTC */ |
| 22 | #define CONFIG_SYS_RTC_BUS_NUM 0 |
| 23 | |
| 24 | /* |
| 25 | * MMC |
| 26 | */ |
| 27 | #ifdef CONFIG_MMC |
| 28 | #ifndef __ASSEMBLY__ |
| 29 | u8 qixis_esdhc_detect_quirk(void); |
| 30 | #endif |
| 31 | #define CONFIG_ESDHC_DETECT_QUIRK qixis_esdhc_detect_quirk() |
| 32 | #endif |
| 33 | |
| 34 | /* MAC/PHY configuration */ |
| 35 | #if defined(CONFIG_FSL_MC_ENET) |
| 36 | #define CONFIG_MII |
| 37 | #define CONFIG_ETHPRIME "DPMAC17@rgmii-id" |
| 38 | #endif |
| 39 | |
| 40 | /* EEPROM */ |
| 41 | #define CONFIG_ID_EEPROM |
| 42 | #define CONFIG_SYS_I2C_EEPROM_NXID |
| 43 | #define CONFIG_SYS_EEPROM_BUS_NUM 0 |
| 44 | #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 |
| 45 | #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 |
| 46 | #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 |
| 47 | #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 |
| 48 | |
| 49 | /* Initial environment variables */ |
| 50 | #define CONFIG_EXTRA_ENV_SETTINGS \ |
| 51 | EXTRA_ENV_SETTINGS \ |
| 52 | "boot_scripts=lx2162aqds_boot.scr\0" \ |
| 53 | "boot_script_hdr=hdr_lx2162aqds_bs.out\0" \ |
| 54 | "BOARD=lx2162aqds\0" \ |
| 55 | "xspi_bootcmd=echo Trying load from flexspi..;" \ |
| 56 | "sf probe 0:0 && sf read $load_addr " \ |
| 57 | "$kernel_start $kernel_size ; env exists secureboot &&" \ |
| 58 | "sf read $kernelheader_addr_r $kernelheader_start " \ |
| 59 | "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\ |
| 60 | " bootm $load_addr#$BOARD\0" \ |
| 61 | "sd_bootcmd=echo Trying load from sd card..;" \ |
| 62 | "mmc dev 0; mmcinfo; mmc read $load_addr " \ |
| 63 | "$kernel_addr_sd $kernel_size_sd ;" \ |
| 64 | "env exists secureboot && mmc read $kernelheader_addr_r "\ |
| 65 | "$kernelhdr_addr_sd $kernelhdr_size_sd " \ |
| 66 | " && esbc_validate ${kernelheader_addr_r};" \ |
| 67 | "bootm $load_addr#$BOARD\0" \ |
| 68 | "emmc_bootcmd=echo Trying load from emmc card..;" \ |
| 69 | "mmc dev 1; mmcinfo; mmc read $load_addr " \ |
| 70 | "$kernel_addr_sd $kernel_size_sd ;" \ |
| 71 | "env exists secureboot && mmc read $kernelheader_addr_r "\ |
| 72 | "$kernelhdr_addr_sd $kernelhdr_size_sd " \ |
| 73 | " && esbc_validate ${kernelheader_addr_r};" \ |
| 74 | "bootm $load_addr#$BOARD\0" |
| 75 | |
| 76 | #include <asm/fsl_secure_boot.h> |
| 77 | |
| 78 | #endif /* __LX2162_QDS_H */ |