MengDongyang | b44566c | 2016-08-24 12:02:17 +0800 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (c) 2016 Rockchip, Inc. |
| 3 | * Authors: Daniel Meng <daniel.meng@rock-chips.com> |
| 4 | * |
| 5 | * SPDX-License-Identifier: GPL-2.0+ |
| 6 | */ |
| 7 | #include <common.h> |
| 8 | #include <dm.h> |
| 9 | #include <fdtdec.h> |
| 10 | #include <libfdt.h> |
| 11 | #include <malloc.h> |
| 12 | #include <usb.h> |
| 13 | #include <watchdog.h> |
| 14 | #include <asm/gpio.h> |
Masahiro Yamada | 5d97dff | 2016-09-21 11:28:57 +0900 | [diff] [blame] | 15 | #include <linux/errno.h> |
MengDongyang | b44566c | 2016-08-24 12:02:17 +0800 | [diff] [blame] | 16 | #include <linux/compat.h> |
| 17 | #include <linux/usb/dwc3.h> |
| 18 | |
| 19 | #include "xhci.h" |
| 20 | |
| 21 | DECLARE_GLOBAL_DATA_PTR; |
| 22 | |
| 23 | struct rockchip_xhci_platdata { |
| 24 | fdt_addr_t hcd_base; |
| 25 | fdt_addr_t phy_base; |
| 26 | struct gpio_desc vbus_gpio; |
| 27 | }; |
| 28 | |
| 29 | /* |
| 30 | * Contains pointers to register base addresses |
| 31 | * for the usb controller. |
| 32 | */ |
| 33 | struct rockchip_xhci { |
| 34 | struct usb_platdata usb_plat; |
| 35 | struct xhci_ctrl ctrl; |
| 36 | struct xhci_hccr *hcd; |
| 37 | struct dwc3 *dwc3_reg; |
| 38 | }; |
| 39 | |
| 40 | static int xhci_usb_ofdata_to_platdata(struct udevice *dev) |
| 41 | { |
| 42 | struct rockchip_xhci_platdata *plat = dev_get_platdata(dev); |
| 43 | struct udevice *child; |
| 44 | int ret = 0; |
| 45 | |
| 46 | /* |
| 47 | * Get the base address for XHCI controller from the device node |
| 48 | */ |
| 49 | plat->hcd_base = dev_get_addr(dev); |
| 50 | if (plat->hcd_base == FDT_ADDR_T_NONE) { |
| 51 | debug("Can't get the XHCI register base address\n"); |
| 52 | return -ENXIO; |
| 53 | } |
| 54 | |
| 55 | /* Get the base address for usbphy from the device node */ |
| 56 | for (device_find_first_child(dev, &child); child; |
| 57 | device_find_next_child(&child)) { |
| 58 | if (!of_device_is_compatible(child, "rockchip,rk3399-usb3-phy")) |
| 59 | continue; |
| 60 | plat->phy_base = dev_get_addr(child); |
| 61 | break; |
| 62 | } |
| 63 | |
| 64 | if (plat->phy_base == FDT_ADDR_T_NONE) { |
| 65 | debug("Can't get the usbphy register address\n"); |
| 66 | return -ENXIO; |
| 67 | } |
| 68 | |
| 69 | /* Vbus gpio */ |
| 70 | ret = gpio_request_by_name(dev, "rockchip,vbus-gpio", 0, |
| 71 | &plat->vbus_gpio, GPIOD_IS_OUT); |
| 72 | if (ret) |
| 73 | debug("rockchip,vbus-gpio node missing!"); |
| 74 | |
| 75 | return 0; |
| 76 | } |
| 77 | |
| 78 | /* |
| 79 | * rockchip_dwc3_phy_setup() - Configure USB PHY Interface of DWC3 Core |
| 80 | * @dwc: Pointer to our controller context structure |
| 81 | * @dev: Pointer to ulcass device |
| 82 | */ |
| 83 | static void rockchip_dwc3_phy_setup(struct dwc3 *dwc3_reg, |
| 84 | struct udevice *dev) |
| 85 | { |
| 86 | u32 reg; |
| 87 | const void *blob = gd->fdt_blob; |
| 88 | u32 utmi_bits; |
| 89 | |
| 90 | /* Set dwc3 usb2 phy config */ |
| 91 | reg = readl(&dwc3_reg->g_usb2phycfg[0]); |
| 92 | |
| 93 | if (fdtdec_get_bool(blob, dev->of_offset, |
| 94 | "snps,dis-enblslpm-quirk")) |
| 95 | reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM; |
| 96 | |
| 97 | utmi_bits = fdtdec_get_int(blob, dev->of_offset, |
| 98 | "snps,phyif-utmi-bits", -1); |
| 99 | if (utmi_bits == 16) { |
| 100 | reg |= DWC3_GUSB2PHYCFG_PHYIF; |
| 101 | reg &= ~DWC3_GUSB2PHYCFG_USBTRDTIM_MASK; |
| 102 | reg |= DWC3_GUSB2PHYCFG_USBTRDTIM_16BIT; |
| 103 | } else if (utmi_bits == 8) { |
| 104 | reg &= ~DWC3_GUSB2PHYCFG_PHYIF; |
| 105 | reg &= ~DWC3_GUSB2PHYCFG_USBTRDTIM_MASK; |
| 106 | reg |= DWC3_GUSB2PHYCFG_USBTRDTIM_8BIT; |
| 107 | } |
| 108 | |
| 109 | if (fdtdec_get_bool(blob, dev->of_offset, |
| 110 | "snps,dis-u2-freeclk-exists-quirk")) |
| 111 | reg &= ~DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS; |
| 112 | |
| 113 | if (fdtdec_get_bool(blob, dev->of_offset, |
| 114 | "snps,dis-u2-susphy-quirk")) |
| 115 | reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; |
| 116 | |
| 117 | writel(reg, &dwc3_reg->g_usb2phycfg[0]); |
| 118 | } |
| 119 | |
| 120 | static int rockchip_xhci_core_init(struct rockchip_xhci *rkxhci, |
| 121 | struct udevice *dev) |
| 122 | { |
| 123 | int ret; |
| 124 | |
| 125 | ret = dwc3_core_init(rkxhci->dwc3_reg); |
| 126 | if (ret) { |
| 127 | debug("failed to initialize core\n"); |
| 128 | return ret; |
| 129 | } |
| 130 | |
| 131 | rockchip_dwc3_phy_setup(rkxhci->dwc3_reg, dev); |
| 132 | |
| 133 | /* We are hard-coding DWC3 core to Host Mode */ |
| 134 | dwc3_set_mode(rkxhci->dwc3_reg, DWC3_GCTL_PRTCAP_HOST); |
| 135 | |
| 136 | return 0; |
| 137 | } |
| 138 | |
| 139 | static int rockchip_xhci_core_exit(struct rockchip_xhci *rkxhci) |
| 140 | { |
| 141 | return 0; |
| 142 | } |
| 143 | |
| 144 | static int xhci_usb_probe(struct udevice *dev) |
| 145 | { |
| 146 | struct rockchip_xhci_platdata *plat = dev_get_platdata(dev); |
| 147 | struct rockchip_xhci *ctx = dev_get_priv(dev); |
| 148 | struct xhci_hcor *hcor; |
| 149 | int ret; |
| 150 | |
| 151 | ctx->hcd = (struct xhci_hccr *)plat->hcd_base; |
| 152 | ctx->dwc3_reg = (struct dwc3 *)((char *)(ctx->hcd) + DWC3_REG_OFFSET); |
| 153 | hcor = (struct xhci_hcor *)((uint64_t)ctx->hcd + |
| 154 | HC_LENGTH(xhci_readl(&ctx->hcd->cr_capbase))); |
| 155 | |
| 156 | /* setup the Vbus gpio here */ |
| 157 | if (dm_gpio_is_valid(&plat->vbus_gpio)) |
| 158 | dm_gpio_set_value(&plat->vbus_gpio, 1); |
| 159 | |
| 160 | ret = rockchip_xhci_core_init(ctx, dev); |
| 161 | if (ret) { |
| 162 | debug("XHCI: failed to initialize controller\n"); |
| 163 | return ret; |
| 164 | } |
| 165 | |
| 166 | return xhci_register(dev, ctx->hcd, hcor); |
| 167 | } |
| 168 | |
| 169 | static int xhci_usb_remove(struct udevice *dev) |
| 170 | { |
| 171 | struct rockchip_xhci *ctx = dev_get_priv(dev); |
| 172 | int ret; |
| 173 | |
| 174 | ret = xhci_deregister(dev); |
| 175 | if (ret) |
| 176 | return ret; |
| 177 | ret = rockchip_xhci_core_exit(ctx); |
| 178 | if (ret) |
| 179 | return ret; |
| 180 | |
| 181 | return 0; |
| 182 | } |
| 183 | |
| 184 | static const struct udevice_id xhci_usb_ids[] = { |
| 185 | { .compatible = "rockchip,rk3399-xhci" }, |
| 186 | { } |
| 187 | }; |
| 188 | |
| 189 | U_BOOT_DRIVER(usb_xhci) = { |
| 190 | .name = "xhci_rockchip", |
| 191 | .id = UCLASS_USB, |
| 192 | .of_match = xhci_usb_ids, |
| 193 | .ofdata_to_platdata = xhci_usb_ofdata_to_platdata, |
| 194 | .probe = xhci_usb_probe, |
| 195 | .remove = xhci_usb_remove, |
| 196 | .ops = &xhci_usb_ops, |
| 197 | .bind = dm_scan_fdt_dev, |
| 198 | .platdata_auto_alloc_size = sizeof(struct rockchip_xhci_platdata), |
| 199 | .priv_auto_alloc_size = sizeof(struct rockchip_xhci), |
| 200 | .flags = DM_FLAG_ALLOC_PRIV_DMA, |
| 201 | }; |
| 202 | |
| 203 | static const struct udevice_id usb_phy_ids[] = { |
| 204 | { .compatible = "rockchip,rk3399-usb3-phy" }, |
| 205 | { } |
| 206 | }; |
| 207 | |
| 208 | U_BOOT_DRIVER(usb_phy) = { |
| 209 | .name = "usb_phy_rockchip", |
| 210 | .of_match = usb_phy_ids, |
| 211 | }; |