blob: 5639a45b377125dcb166b6529a7f02b64b1a9635 [file] [log] [blame]
Ajay Bhargav26749582011-08-04 21:26:02 +05301/*
2 * (C) Copyright 2011
3 * eInfochips Ltd. <www.einfochips.com>
Ajay Bhargavc7c47ca2016-12-21 13:28:06 +05304 * Written-by: Ajay Bhargav <contact@8051projects.net>
Ajay Bhargav26749582011-08-04 21:26:02 +05305 *
6 * Based on Aspenite:
7 * (C) Copyright 2010
8 * Marvell Semiconductor <www.marvell.com>
9 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
10 * Contributor: Mahavir Jain <mjain@marvell.com>
11 *
Wolfgang Denk1a459662013-07-08 09:37:19 +020012 * SPDX-License-Identifier: GPL-2.0+
Ajay Bhargav26749582011-08-04 21:26:02 +053013 */
14
15#ifndef __CONFIG_GPLUGD_H
16#define __CONFIG_GPLUGD_H
17
18/*
Ajay Bhargav26749582011-08-04 21:26:02 +053019 * High Level Configuration Options
20 */
21#define CONFIG_SHEEVA_88SV331xV5 1 /* CPU Core subversion */
22#define CONFIG_ARMADA100 1 /* SOC Family Name */
23#define CONFIG_ARMADA168 1 /* SOC Used on this Board */
Tom Rini92a1bab2017-01-25 20:42:36 -050024#define CONFIG_MACH_TYPE MACH_TYPE_GPLUGD /* Machine type */
Ajay Bhargav26749582011-08-04 21:26:02 +053025#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
26
27#define CONFIG_SYS_TEXT_BASE 0x00f00000
28
29/*
30 * There is no internal RAM in ARMADA100, using DRAM
31 * TBD: dcache to be used for this
32 */
33#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - 0x00200000)
34#define CONFIG_NR_DRAM_BANKS_MAX 2
35
36/*
37 * Commands configuration
38 */
39#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
Ajay Bhargavaa0ecfe2011-09-13 22:22:04 +053040
41/* Disable DCACHE */
42#define CONFIG_SYS_DCACHE_OFF
43
44/* Network configuration */
45#ifdef CONFIG_CMD_NET
Ajay Bhargavaa0ecfe2011-09-13 22:22:04 +053046#define CONFIG_ARMADA100_FEC
47
48/* DHCP Support */
Ajay Bhargavaa0ecfe2011-09-13 22:22:04 +053049#define CONFIG_BOOTP_DHCP_REQUEST_DELAY 50000
50#endif /* CONFIG_CMD_NET */
Ajay Bhargav26749582011-08-04 21:26:02 +053051
Ajay Bhargav47e75d72011-09-13 22:22:13 +053052/* GPIO Support */
53#define CONFIG_MARVELL_GPIO
54
55/* PHY configuration */
56#define CONFIG_MII
Ajay Bhargav47e75d72011-09-13 22:22:13 +053057#define CONFIG_RESET_PHY_R
58/* 88E3015 register definition */
59#define PHY_LED_PAR_SEL_REG 22
60#define PHY_LED_MAN_REG 25
61#define PHY_LED_VAL 0x5b /* LINK LED1, ACT LED2 */
62/* GPIO Configuration for PHY */
63#define CONFIG_SYS_GPIO_PHY_RST 104 /* GPIO104 */
64
Ajay Bhargav2f83cd52011-10-03 14:00:58 +053065/* Flash Support */
Ajay Bhargav2f83cd52011-10-03 14:00:58 +053066
Ajay Bhargav26749582011-08-04 21:26:02 +053067/*
68 * mv-common.h should be defined after CMD configs since it used them
69 * to enable certain macros
70 */
71#include "mv-common.h"
Ajay Bhargav26749582011-08-04 21:26:02 +053072
73#ifdef CONFIG_SYS_NS16550_COM1
74#undef CONFIG_SYS_NS16550_COM1
75#endif /* CONFIG_SYS_NS16550_COM1 */
76
77#define CONFIG_SYS_NS16550_COM1 ARMD1_UART3_BASE
78
79/*
80 * Environment variables configurations
81 */
Jagan Tekicb71c6d2016-11-25 00:58:58 +053082#define CONFIG_ENV_IS_NOWHERE
Ajay Bhargavb5de0382011-10-03 14:00:58 +053083#define CONFIG_ENV_SIZE 0x4000
Ajay Bhargavb5de0382011-10-03 14:00:58 +053084
Ajay Bhargav099cb1e2012-02-13 03:27:44 +000085#ifdef CONFIG_CMD_USB
86#define CONFIG_USB_EHCI
87#define CONFIG_USB_EHCI_ARMADA100
88#define CONFIG_EHCI_IS_TDI
Ajay Bhargav099cb1e2012-02-13 03:27:44 +000089#endif /* CONFIG_CMD_USB */
90
Ajay Bhargav099cb1e2012-02-13 03:27:44 +000091#define CONFIG_SUPPORT_VFAT
92
Ajay Bhargav26749582011-08-04 21:26:02 +053093#endif /* __CONFIG_GPLUGD_H */