blob: 8e9a1a80a8c574e54c0644426325c202a3e19d67 [file] [log] [blame]
Mugunthan V Ne5520e12015-09-22 18:45:12 +05301/*
2 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 */
8/dts-v1/;
9
10#include "dra74x.dtsi"
Lokesh Vutla4ddaa6c2017-08-21 12:50:59 +053011#include "dra7-evm-common.dtsi"
12#include "dra74x-mmc-iodelay.dtsi"
Mugunthan V Ne5520e12015-09-22 18:45:12 +053013
14/ {
15 model = "TI DRA742";
16 compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7";
17
Lokesh Vutla7aa1a402016-11-23 13:25:29 +053018 memory@0 {
Mugunthan V Ne5520e12015-09-22 18:45:12 +053019 device_type = "memory";
Lokesh Vutla7aa1a402016-11-23 13:25:29 +053020 reg = <0x0 0x80000000 0x0 0x60000000>; /* 1536 MB */
Mugunthan V Ne5520e12015-09-22 18:45:12 +053021 };
22
Lokesh Vutla4ddaa6c2017-08-21 12:50:59 +053023 evm_1v8_sw: fixedregulator-evm_1v8 {
24 compatible = "regulator-fixed";
25 regulator-name = "evm_1v8";
26 vin-supply = <&smps9_reg>;
27 regulator-min-microvolt = <1800000>;
28 regulator-max-microvolt = <1800000>;
29 };
30
Vignesh R257bdb32016-08-10 15:17:20 +053031 evm_3v3_sd: fixedregulator-sd {
32 compatible = "regulator-fixed";
33 regulator-name = "evm_3v3_sd";
34 regulator-min-microvolt = <3300000>;
35 regulator-max-microvolt = <3300000>;
36 enable-active-high;
37 gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>;
38 };
39
Lokesh Vutla7aa1a402016-11-23 13:25:29 +053040 evm_3v3_sw: fixedregulator-evm_3v3_sw {
Mugunthan V Ne5520e12015-09-22 18:45:12 +053041 compatible = "regulator-fixed";
Lokesh Vutla7aa1a402016-11-23 13:25:29 +053042 regulator-name = "evm_3v3_sw";
43 vin-supply = <&sysen1>;
Mugunthan V Ne5520e12015-09-22 18:45:12 +053044 regulator-min-microvolt = <3300000>;
45 regulator-max-microvolt = <3300000>;
46 };
47
Lokesh Vutla7aa1a402016-11-23 13:25:29 +053048 aic_dvdd: fixedregulator-aic_dvdd {
49 /* TPS77018DBVT */
50 compatible = "regulator-fixed";
51 regulator-name = "aic_dvdd";
52 vin-supply = <&evm_3v3_sw>;
53 regulator-min-microvolt = <1800000>;
54 regulator-max-microvolt = <1800000>;
55 };
56
Mugunthan V Ne5520e12015-09-22 18:45:12 +053057 extcon_usb2: extcon_usb2 {
58 compatible = "linux,extcon-usb-gpio";
59 id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
60 };
61
62 vtt_fixed: fixedregulator-vtt {
63 compatible = "regulator-fixed";
64 regulator-name = "vtt_fixed";
65 regulator-min-microvolt = <1350000>;
66 regulator-max-microvolt = <1350000>;
67 regulator-always-on;
68 regulator-boot-on;
69 enable-active-high;
Lokesh Vutla7aa1a402016-11-23 13:25:29 +053070 vin-supply = <&sysen2>;
Mugunthan V Ne5520e12015-09-22 18:45:12 +053071 gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
72 };
Lokesh Vutla7aa1a402016-11-23 13:25:29 +053073
Mugunthan V Ne5520e12015-09-22 18:45:12 +053074};
75
76&dra7_pmx_core {
Mugunthan V Ne5520e12015-09-22 18:45:12 +053077 dcan1_pins_default: dcan1_pins_default {
78 pinctrl-single,pins = <
Lokesh Vutla7aa1a402016-11-23 13:25:29 +053079 DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
80 DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
Mugunthan V Ne5520e12015-09-22 18:45:12 +053081 >;
82 };
83
84 dcan1_pins_sleep: dcan1_pins_sleep {
85 pinctrl-single,pins = <
Lokesh Vutla7aa1a402016-11-23 13:25:29 +053086 DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP) /* dcan1_tx.off */
87 DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP) /* wakeup0.off */
88 >;
89 };
90
Lokesh Vutla4ddaa6c2017-08-21 12:50:59 +053091 mmc1_pins_default: mmc1_pins_default {
Lokesh Vutla7aa1a402016-11-23 13:25:29 +053092 pinctrl-single,pins = <
Lokesh Vutla4ddaa6c2017-08-21 12:50:59 +053093 DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */
94 DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
95 DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
96 DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
97 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
98 DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
99 DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
Lokesh Vutla7aa1a402016-11-23 13:25:29 +0530100 >;
101 };
102
Lokesh Vutla4ddaa6c2017-08-21 12:50:59 +0530103 mmc2_pins_default: mmc2_pins_default {
Lokesh Vutla7aa1a402016-11-23 13:25:29 +0530104 pinctrl-single,pins = <
Lokesh Vutla4ddaa6c2017-08-21 12:50:59 +0530105 DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
106 DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
107 DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
108 DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
109 DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
110 DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
111 DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
112 DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
113 DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
114 DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
Mugunthan V Ne5520e12015-09-22 18:45:12 +0530115 >;
116 };
117};
118
119&i2c1 {
120 status = "okay";
Mugunthan V Ne5520e12015-09-22 18:45:12 +0530121 clock-frequency = <400000>;
122
123 tps659038: tps659038@58 {
124 compatible = "ti,tps659038";
125 reg = <0x58>;
Lokesh Vutla4ddaa6c2017-08-21 12:50:59 +0530126 ti,palmas-override-powerhold;
127 ti,system-power-controller;
Mugunthan V Ne5520e12015-09-22 18:45:12 +0530128
129 tps659038_pmic {
130 compatible = "ti,tps659038-pmic";
131
132 regulators {
133 smps123_reg: smps123 {
134 /* VDD_MPU */
135 regulator-name = "smps123";
136 regulator-min-microvolt = < 850000>;
137 regulator-max-microvolt = <1250000>;
138 regulator-always-on;
139 regulator-boot-on;
140 };
141
142 smps45_reg: smps45 {
143 /* VDD_DSPEVE */
144 regulator-name = "smps45";
145 regulator-min-microvolt = < 850000>;
Lokesh Vutla7aa1a402016-11-23 13:25:29 +0530146 regulator-max-microvolt = <1250000>;
Mugunthan V Ne5520e12015-09-22 18:45:12 +0530147 regulator-always-on;
148 regulator-boot-on;
149 };
150
151 smps6_reg: smps6 {
152 /* VDD_GPU - over VDD_SMPS6 */
153 regulator-name = "smps6";
154 regulator-min-microvolt = <850000>;
155 regulator-max-microvolt = <1250000>;
156 regulator-always-on;
157 regulator-boot-on;
158 };
159
160 smps7_reg: smps7 {
161 /* CORE_VDD */
162 regulator-name = "smps7";
163 regulator-min-microvolt = <850000>;
Lokesh Vutla7aa1a402016-11-23 13:25:29 +0530164 regulator-max-microvolt = <1150000>;
Mugunthan V Ne5520e12015-09-22 18:45:12 +0530165 regulator-always-on;
166 regulator-boot-on;
167 };
168
169 smps8_reg: smps8 {
170 /* VDD_IVAHD */
171 regulator-name = "smps8";
172 regulator-min-microvolt = < 850000>;
173 regulator-max-microvolt = <1250000>;
174 regulator-always-on;
175 regulator-boot-on;
176 };
177
178 smps9_reg: smps9 {
179 /* VDDS1V8 */
180 regulator-name = "smps9";
181 regulator-min-microvolt = <1800000>;
182 regulator-max-microvolt = <1800000>;
183 regulator-always-on;
184 regulator-boot-on;
185 };
186
187 ldo1_reg: ldo1 {
188 /* LDO1_OUT --> SDIO */
189 regulator-name = "ldo1";
190 regulator-min-microvolt = <1800000>;
191 regulator-max-microvolt = <3300000>;
Lokesh Vutla7aa1a402016-11-23 13:25:29 +0530192 regulator-always-on;
Mugunthan V Ne5520e12015-09-22 18:45:12 +0530193 regulator-boot-on;
194 };
195
196 ldo2_reg: ldo2 {
197 /* VDD_RTCIO */
198 /* LDO2 -> VDDSHV5, LDO2 also goes to CAN_PHY_3V3 */
199 regulator-name = "ldo2";
200 regulator-min-microvolt = <3300000>;
201 regulator-max-microvolt = <3300000>;
202 regulator-always-on;
203 regulator-boot-on;
204 };
205
206 ldo3_reg: ldo3 {
207 /* VDDA_1V8_PHY */
208 regulator-name = "ldo3";
209 regulator-min-microvolt = <1800000>;
210 regulator-max-microvolt = <1800000>;
211 regulator-always-on;
212 regulator-boot-on;
213 };
214
215 ldo9_reg: ldo9 {
216 /* VDD_RTC */
217 regulator-name = "ldo9";
218 regulator-min-microvolt = <1050000>;
219 regulator-max-microvolt = <1050000>;
220 regulator-always-on;
221 regulator-boot-on;
Lokesh Vutla7aa1a402016-11-23 13:25:29 +0530222 regulator-allow-bypass;
Mugunthan V Ne5520e12015-09-22 18:45:12 +0530223 };
224
225 ldoln_reg: ldoln {
226 /* VDDA_1V8_PLL */
227 regulator-name = "ldoln";
228 regulator-min-microvolt = <1800000>;
229 regulator-max-microvolt = <1800000>;
230 regulator-always-on;
231 regulator-boot-on;
232 };
233
234 ldousb_reg: ldousb {
235 /* VDDA_3V_USB: VDDA_USBHS33 */
236 regulator-name = "ldousb";
237 regulator-min-microvolt = <3300000>;
238 regulator-max-microvolt = <3300000>;
239 regulator-boot-on;
240 };
Lokesh Vutla7aa1a402016-11-23 13:25:29 +0530241
242 /* REGEN1 is unused */
243
244 regen2: regen2 {
245 /* Needed for PMIC internal resources */
246 regulator-name = "regen2";
247 regulator-boot-on;
248 regulator-always-on;
249 };
250
251 /* REGEN3 is unused */
252
253 sysen1: sysen1 {
254 /* PMIC_REGEN_3V3 */
255 regulator-name = "sysen1";
256 regulator-boot-on;
257 regulator-always-on;
258 };
259
260 sysen2: sysen2 {
261 /* PMIC_REGEN_DDR */
262 regulator-name = "sysen2";
263 regulator-boot-on;
264 regulator-always-on;
265 };
Mugunthan V Ne5520e12015-09-22 18:45:12 +0530266 };
267 };
268 };
269
Lokesh Vutla7aa1a402016-11-23 13:25:29 +0530270 pcf_lcd: gpio@20 {
271 compatible = "ti,pcf8575", "nxp,pcf8575";
272 reg = <0x20>;
273 gpio-controller;
274 #gpio-cells = <2>;
275 interrupt-parent = <&gpio6>;
276 interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
277 interrupt-controller;
278 #interrupt-cells = <2>;
279 };
280
Mugunthan V Ne5520e12015-09-22 18:45:12 +0530281 pcf_gpio_21: gpio@21 {
Lokesh Vutla7aa1a402016-11-23 13:25:29 +0530282 compatible = "ti,pcf8575", "nxp,pcf8575";
Mugunthan V Ne5520e12015-09-22 18:45:12 +0530283 reg = <0x21>;
284 lines-initial-states = <0x1408>;
285 gpio-controller;
286 #gpio-cells = <2>;
287 interrupt-parent = <&gpio6>;
288 interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
289 interrupt-controller;
290 #interrupt-cells = <2>;
291 };
292
Lokesh Vutla7aa1a402016-11-23 13:25:29 +0530293 tlv320aic3106: tlv320aic3106@19 {
294 #sound-dai-cells = <0>;
295 compatible = "ti,tlv320aic3106";
296 reg = <0x19>;
297 adc-settle-ms = <40>;
298 ai3x-micbias-vg = <1>; /* 2.0V */
299 status = "okay";
300
301 /* Regulators */
302 AVDD-supply = <&evm_3v3_sw>;
303 IOVDD-supply = <&evm_3v3_sw>;
304 DRVDD-supply = <&evm_3v3_sw>;
305 DVDD-supply = <&aic_dvdd>;
306 };
Mugunthan V Ne5520e12015-09-22 18:45:12 +0530307};
308
309&i2c2 {
310 status = "okay";
Mugunthan V Ne5520e12015-09-22 18:45:12 +0530311 clock-frequency = <400000>;
Lokesh Vutla7aa1a402016-11-23 13:25:29 +0530312
313 pcf_hdmi: gpio@26 {
314 compatible = "ti,pcf8575", "nxp,pcf8575";
315 reg = <0x26>;
316 gpio-controller;
317 #gpio-cells = <2>;
318 p1 {
319 /* vin6_sel_s0: high: VIN6, low: audio */
320 gpio-hog;
321 gpios = <1 GPIO_ACTIVE_HIGH>;
322 output-low;
323 line-name = "vin6_sel_s0";
324 };
325 };
Mugunthan V Ne5520e12015-09-22 18:45:12 +0530326};
327
Mugunthan V Ne5520e12015-09-22 18:45:12 +0530328&mmc1 {
329 status = "okay";
Vignesh R257bdb32016-08-10 15:17:20 +0530330 vmmc-supply = <&evm_3v3_sd>;
Lokesh Vutla4ddaa6c2017-08-21 12:50:59 +0530331 vqmmc-supply = <&ldo1_reg>;
Mugunthan V Ne5520e12015-09-22 18:45:12 +0530332 bus-width = <4>;
Mugunthan V Ne3614212016-04-04 17:28:03 +0530333 /*
334 * SDCD signal is not being used here - using the fact that GPIO mode
335 * is always hardwired.
336 */
337 cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
Lokesh Vutla4ddaa6c2017-08-21 12:50:59 +0530338 pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50-rev11", "sdr104-rev11", "ddr50", "sdr104";
339 pinctrl-0 = <&mmc1_pins_default>;
340 pinctrl-1 = <&mmc1_pins_hs>;
341 pinctrl-2 = <&mmc1_pins_sdr12>;
342 pinctrl-3 = <&mmc1_pins_sdr25>;
343 pinctrl-4 = <&mmc1_pins_sdr50>;
344 pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev11_conf>;
345 pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev11_conf>;
346 pinctrl-7 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>;
347 pinctrl-8 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
Mugunthan V Ne5520e12015-09-22 18:45:12 +0530348};
349
350&mmc2 {
351 status = "okay";
Lokesh Vutla4ddaa6c2017-08-21 12:50:59 +0530352 vmmc-supply = <&evm_1v8_sw>;
Mugunthan V Ne5520e12015-09-22 18:45:12 +0530353 bus-width = <8>;
Lokesh Vutla4ddaa6c2017-08-21 12:50:59 +0530354 pinctrl-names = "default", "hs", "ddr_1_8v-rev11", "ddr_1_8v", "hs200_1_8v-rev11", "hs200_1_8v";
355 pinctrl-0 = <&mmc2_pins_default>;
356 pinctrl-1 = <&mmc2_pins_hs>;
357 pinctrl-2 = <&mmc2_pins_ddr_1_8v_rev11 &mmc2_iodelay_ddr_1_8v_rev11_conf>;
358 pinctrl-3 = <&mmc2_pins_ddr_rev20>;
359 pinctrl-4 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev11_conf>;
360 pinctrl-5 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>;
Mugunthan V Ne5520e12015-09-22 18:45:12 +0530361};
362
363&cpu0 {
364 cpu0-supply = <&smps123_reg>;
365};
366
Mugunthan V Ne5520e12015-09-22 18:45:12 +0530367&omap_dwc3_2 {
368 extcon = <&extcon_usb2>;
369};
370
Mugunthan V Ne5520e12015-09-22 18:45:12 +0530371&elm {
372 status = "okay";
373};
374
375&gpmc {
Lokesh Vutla4ddaa6c2017-08-21 12:50:59 +0530376 /*
377 * For the existing IOdelay configuration via U-Boot we don't
378 * support NAND on dra7-evm. Keep it disabled. Enabling it
379 * requires a different configuration by U-Boot.
380 */
381 status = "disabled";
Lokesh Vutla7aa1a402016-11-23 13:25:29 +0530382 ranges = <0 0 0x08000000 0x01000000>; /* minimum GPMC partition = 16MB */
Mugunthan V Ne5520e12015-09-22 18:45:12 +0530383 nand@0,0 {
Lokesh Vutla7aa1a402016-11-23 13:25:29 +0530384 compatible = "ti,omap2-nand";
Mugunthan V Ne5520e12015-09-22 18:45:12 +0530385 reg = <0 0 4>; /* device IO registers */
Lokesh Vutla7aa1a402016-11-23 13:25:29 +0530386 interrupt-parent = <&gpmc>;
387 interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
388 <1 IRQ_TYPE_NONE>; /* termcount */
389 rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */
Lokesh Vutla4ddaa6c2017-08-21 12:50:59 +0530390 ti,nand-xfer-type = "prefetch-dma";
Mugunthan V Ne5520e12015-09-22 18:45:12 +0530391 ti,nand-ecc-opt = "bch8";
392 ti,elm-id = <&elm>;
393 nand-bus-width = <16>;
394 gpmc,device-width = <2>;
395 gpmc,sync-clk-ps = <0>;
396 gpmc,cs-on-ns = <0>;
397 gpmc,cs-rd-off-ns = <80>;
398 gpmc,cs-wr-off-ns = <80>;
399 gpmc,adv-on-ns = <0>;
400 gpmc,adv-rd-off-ns = <60>;
401 gpmc,adv-wr-off-ns = <60>;
402 gpmc,we-on-ns = <10>;
403 gpmc,we-off-ns = <50>;
404 gpmc,oe-on-ns = <4>;
405 gpmc,oe-off-ns = <40>;
406 gpmc,access-ns = <40>;
407 gpmc,wr-access-ns = <80>;
408 gpmc,rd-cycle-ns = <80>;
409 gpmc,wr-cycle-ns = <80>;
410 gpmc,bus-turnaround-ns = <0>;
411 gpmc,cycle2cycle-delay-ns = <0>;
412 gpmc,clk-activation-ns = <0>;
Mugunthan V Ne5520e12015-09-22 18:45:12 +0530413 gpmc,wr-data-mux-bus-ns = <0>;
414 /* MTD partition table */
415 /* All SPL-* partitions are sized to minimal length
416 * which can be independently programmable. For
417 * NAND flash this is equal to size of erase-block */
418 #address-cells = <1>;
419 #size-cells = <1>;
420 partition@0 {
421 label = "NAND.SPL";
422 reg = <0x00000000 0x000020000>;
423 };
424 partition@1 {
425 label = "NAND.SPL.backup1";
426 reg = <0x00020000 0x00020000>;
427 };
428 partition@2 {
429 label = "NAND.SPL.backup2";
430 reg = <0x00040000 0x00020000>;
431 };
432 partition@3 {
433 label = "NAND.SPL.backup3";
434 reg = <0x00060000 0x00020000>;
435 };
436 partition@4 {
437 label = "NAND.u-boot-spl-os";
438 reg = <0x00080000 0x00040000>;
439 };
440 partition@5 {
441 label = "NAND.u-boot";
442 reg = <0x000c0000 0x00100000>;
443 };
444 partition@6 {
445 label = "NAND.u-boot-env";
446 reg = <0x001c0000 0x00020000>;
447 };
448 partition@7 {
449 label = "NAND.u-boot-env.backup1";
450 reg = <0x001e0000 0x00020000>;
451 };
452 partition@8 {
453 label = "NAND.kernel";
454 reg = <0x00200000 0x00800000>;
455 };
456 partition@9 {
457 label = "NAND.file-system";
458 reg = <0x00a00000 0x0f600000>;
459 };
460 };
461};
462
463&usb2_phy1 {
464 phy-supply = <&ldousb_reg>;
465};
466
467&usb2_phy2 {
468 phy-supply = <&ldousb_reg>;
469};
470
471&gpio7 {
472 ti,no-reset-on-init;
473 ti,no-idle-on-init;
474};
475
476&mac {
477 status = "okay";
Mugunthan V Ne5520e12015-09-22 18:45:12 +0530478 dual_emac;
479};
480
481&cpsw_emac0 {
Grygorii Strashko68d875d2019-08-31 10:30:32 +0300482 phy-handle = <&ethphy0>;
Mugunthan V Ne5520e12015-09-22 18:45:12 +0530483 phy-mode = "rgmii";
484 dual_emac_res_vlan = <1>;
485};
486
487&cpsw_emac1 {
Grygorii Strashko68d875d2019-08-31 10:30:32 +0300488 phy-handle = <&ethphy1>;
Mugunthan V Ne5520e12015-09-22 18:45:12 +0530489 phy-mode = "rgmii";
490 dual_emac_res_vlan = <2>;
491};
492
Grygorii Strashko68d875d2019-08-31 10:30:32 +0300493&davinci_mdio {
494 ethphy0: ethernet-phy@2 {
495 reg = <2>;
496 };
497
498 ethphy1: ethernet-phy@3 {
499 reg = <3>;
500 };
501};
502
Mugunthan V Ne5520e12015-09-22 18:45:12 +0530503&dcan1 {
Roger Quadros72f78c62021-08-24 14:07:27 +0300504 status = "okay";
Mugunthan V Ne5520e12015-09-22 18:45:12 +0530505 pinctrl-names = "default", "sleep", "active";
506 pinctrl-0 = <&dcan1_pins_sleep>;
507 pinctrl-1 = <&dcan1_pins_sleep>;
508 pinctrl-2 = <&dcan1_pins_default>;
509};
Lokesh Vutla7aa1a402016-11-23 13:25:29 +0530510
Lokesh Vutla4ddaa6c2017-08-21 12:50:59 +0530511&pcie1_rc {
Lokesh Vutla7aa1a402016-11-23 13:25:29 +0530512 status = "okay";
Lokesh Vutla7aa1a402016-11-23 13:25:29 +0530513};