Chris Packham | 6220ed4 | 2018-05-17 21:45:58 +1200 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /* |
| 3 | * Nodes for Marvell 628x Synology devices |
| 4 | * |
| 5 | * Andrew Lunn <andrew@lunn.ch> |
| 6 | * Ben Peddell <klightspeed@killerwolves.net> |
| 7 | * |
| 8 | */ |
| 9 | |
| 10 | / { |
| 11 | ocp@f1000000 { |
| 12 | pinctrl: pin-controller@10000 { |
| 13 | pmx_alarmled_12: pmx-alarmled-12 { |
| 14 | marvell,pins = "mpp12"; |
| 15 | marvell,function = "gpio"; |
| 16 | }; |
| 17 | |
| 18 | pmx_fanctrl_15: pmx-fanctrl-15 { |
| 19 | marvell,pins = "mpp15"; |
| 20 | marvell,function = "gpio"; |
| 21 | }; |
| 22 | |
| 23 | pmx_fanctrl_16: pmx-fanctrl-16 { |
| 24 | marvell,pins = "mpp16"; |
| 25 | marvell,function = "gpio"; |
| 26 | }; |
| 27 | |
| 28 | pmx_fanctrl_17: pmx-fanctrl-17 { |
| 29 | marvell,pins = "mpp17"; |
| 30 | marvell,function = "gpio"; |
| 31 | }; |
| 32 | |
| 33 | pmx_fanalarm_18: pmx-fanalarm-18 { |
| 34 | marvell,pins = "mpp18"; |
| 35 | marvell,function = "gpo"; |
| 36 | }; |
| 37 | |
| 38 | pmx_hddled_20: pmx-hddled-20 { |
| 39 | marvell,pins = "mpp20"; |
| 40 | marvell,function = "gpio"; |
| 41 | }; |
| 42 | |
| 43 | pmx_hddled_21: pmx-hddled-21 { |
| 44 | marvell,pins = "mpp21"; |
| 45 | marvell,function = "gpio"; |
| 46 | }; |
| 47 | |
| 48 | pmx_hddled_22: pmx-hddled-22 { |
| 49 | marvell,pins = "mpp22"; |
| 50 | marvell,function = "gpio"; |
| 51 | }; |
| 52 | |
| 53 | pmx_hddled_23: pmx-hddled-23 { |
| 54 | marvell,pins = "mpp23"; |
| 55 | marvell,function = "gpio"; |
| 56 | }; |
| 57 | |
| 58 | pmx_hddled_24: pmx-hddled-24 { |
| 59 | marvell,pins = "mpp24"; |
| 60 | marvell,function = "gpio"; |
| 61 | }; |
| 62 | |
| 63 | pmx_hddled_25: pmx-hddled-25 { |
| 64 | marvell,pins = "mpp25"; |
| 65 | marvell,function = "gpio"; |
| 66 | }; |
| 67 | |
| 68 | pmx_hddled_26: pmx-hddled-26 { |
| 69 | marvell,pins = "mpp26"; |
| 70 | marvell,function = "gpio"; |
| 71 | }; |
| 72 | |
| 73 | pmx_hddled_27: pmx-hddled-27 { |
| 74 | marvell,pins = "mpp27"; |
| 75 | marvell,function = "gpio"; |
| 76 | }; |
| 77 | |
| 78 | pmx_hddled_28: pmx-hddled-28 { |
| 79 | marvell,pins = "mpp28"; |
| 80 | marvell,function = "gpio"; |
| 81 | }; |
| 82 | |
| 83 | pmx_hdd1_pwr_29: pmx-hdd1-pwr-29 { |
| 84 | marvell,pins = "mpp29"; |
| 85 | marvell,function = "gpio"; |
| 86 | }; |
| 87 | |
| 88 | pmx_hdd1_pwr_30: pmx-hdd-pwr-30 { |
| 89 | marvell,pins = "mpp30"; |
| 90 | marvell,function = "gpio"; |
| 91 | }; |
| 92 | |
| 93 | pmx_hdd2_pwr_31: pmx-hdd2-pwr-31 { |
| 94 | marvell,pins = "mpp31"; |
| 95 | marvell,function = "gpio"; |
| 96 | }; |
| 97 | |
| 98 | pmx_fanctrl_32: pmx-fanctrl-32 { |
| 99 | marvell,pins = "mpp32"; |
| 100 | marvell,function = "gpio"; |
| 101 | }; |
| 102 | |
| 103 | pmx_fanctrl_33: pmx-fanctrl-33 { |
| 104 | marvell,pins = "mpp33"; |
| 105 | marvell,function = "gpo"; |
| 106 | }; |
| 107 | |
| 108 | pmx_fanctrl_34: pmx-fanctrl-34 { |
| 109 | marvell,pins = "mpp34"; |
| 110 | marvell,function = "gpio"; |
| 111 | }; |
| 112 | |
| 113 | pmx_hdd2_pwr_34: pmx-hdd2-pwr-34 { |
| 114 | marvell,pins = "mpp34"; |
| 115 | marvell,function = "gpio"; |
| 116 | }; |
| 117 | |
| 118 | pmx_fanalarm_35: pmx-fanalarm-35 { |
| 119 | marvell,pins = "mpp35"; |
| 120 | marvell,function = "gpio"; |
| 121 | }; |
| 122 | |
| 123 | pmx_hddled_36: pmx-hddled-36 { |
| 124 | marvell,pins = "mpp36"; |
| 125 | marvell,function = "gpio"; |
| 126 | }; |
| 127 | |
| 128 | pmx_hddled_37: pmx-hddled-37 { |
| 129 | marvell,pins = "mpp37"; |
| 130 | marvell,function = "gpio"; |
| 131 | }; |
| 132 | |
| 133 | pmx_hddled_38: pmx-hddled-38 { |
| 134 | marvell,pins = "mpp38"; |
| 135 | marvell,function = "gpio"; |
| 136 | }; |
| 137 | |
| 138 | pmx_hddled_39: pmx-hddled-39 { |
| 139 | marvell,pins = "mpp39"; |
| 140 | marvell,function = "gpio"; |
| 141 | }; |
| 142 | |
| 143 | pmx_hddled_40: pmx-hddled-40 { |
| 144 | marvell,pins = "mpp40"; |
| 145 | marvell,function = "gpio"; |
| 146 | }; |
| 147 | |
| 148 | pmx_hddled_41: pmx-hddled-41 { |
| 149 | marvell,pins = "mpp41"; |
| 150 | marvell,function = "gpio"; |
| 151 | }; |
| 152 | |
| 153 | pmx_hddled_42: pmx-hddled-42 { |
| 154 | marvell,pins = "mpp42"; |
| 155 | marvell,function = "gpio"; |
| 156 | }; |
| 157 | |
| 158 | pmx_hddled_43: pmx-hddled-43 { |
| 159 | marvell,pins = "mpp43"; |
| 160 | marvell,function = "gpio"; |
| 161 | }; |
| 162 | |
| 163 | pmx_hddled_44: pmx-hddled-44 { |
| 164 | marvell,pins = "mpp44"; |
| 165 | marvell,function = "gpio"; |
| 166 | }; |
| 167 | |
| 168 | pmx_hddled_45: pmx-hddled-45 { |
| 169 | marvell,pins = "mpp45"; |
| 170 | marvell,function = "gpio"; |
| 171 | }; |
| 172 | |
| 173 | pmx_hdd3_pwr_44: pmx-hdd3-pwr-44 { |
| 174 | marvell,pins = "mpp44"; |
| 175 | marvell,function = "gpio"; |
| 176 | }; |
| 177 | |
| 178 | pmx_hdd4_pwr_45: pmx-hdd4-pwr-45 { |
| 179 | marvell,pins = "mpp45"; |
| 180 | marvell,function = "gpio"; |
| 181 | }; |
| 182 | |
| 183 | pmx_fanalarm_44: pmx-fanalarm-44 { |
| 184 | marvell,pins = "mpp44"; |
| 185 | marvell,function = "gpio"; |
| 186 | }; |
| 187 | |
| 188 | pmx_fanalarm_45: pmx-fanalarm-45 { |
| 189 | marvell,pins = "mpp45"; |
| 190 | marvell,function = "gpio"; |
| 191 | }; |
| 192 | }; |
| 193 | |
| 194 | rtc@10300 { |
| 195 | status = "disabled"; |
| 196 | }; |
| 197 | |
| 198 | spi@10600 { |
| 199 | status = "okay"; |
| 200 | |
| 201 | m25p80@0 { |
| 202 | #address-cells = <1>; |
| 203 | #size-cells = <1>; |
| 204 | compatible = "st,m25p80", "jedec,spi-nor", "spi-flash"; |
| 205 | reg = <0>; |
| 206 | spi-max-frequency = <20000000>; |
| 207 | mode = <0>; |
| 208 | |
| 209 | partition@0 { |
| 210 | reg = <0x00000000 0x00080000>; |
| 211 | label = "RedBoot"; |
| 212 | }; |
| 213 | |
| 214 | partition@80000 { |
| 215 | reg = <0x00080000 0x00200000>; |
| 216 | label = "zImage"; |
| 217 | }; |
| 218 | |
| 219 | partition@280000 { |
| 220 | reg = <0x00280000 0x00140000>; |
| 221 | label = "rd.gz"; |
| 222 | }; |
| 223 | |
| 224 | partition@3c0000 { |
| 225 | reg = <0x003c0000 0x00010000>; |
| 226 | label = "vendor"; |
| 227 | }; |
| 228 | |
| 229 | partition@3d0000 { |
| 230 | reg = <0x003d0000 0x00020000>; |
| 231 | label = "RedBoot config"; |
| 232 | }; |
| 233 | |
| 234 | partition@3f0000 { |
| 235 | reg = <0x003f0000 0x00010000>; |
| 236 | label = "FIS directory"; |
| 237 | }; |
| 238 | }; |
| 239 | }; |
| 240 | |
| 241 | i2c@11000 { |
| 242 | status = "okay"; |
| 243 | clock-frequency = <400000>; |
| 244 | |
| 245 | rs5c372: rs5c372@32 { |
| 246 | status = "disabled"; |
| 247 | compatible = "ricoh,rs5c372"; |
| 248 | reg = <0x32>; |
| 249 | }; |
| 250 | |
| 251 | s35390a: s35390a@30 { |
| 252 | status = "disabled"; |
| 253 | compatible = "sii,s35390a"; |
| 254 | reg = <0x30>; |
| 255 | }; |
| 256 | }; |
| 257 | |
| 258 | serial@12000 { |
| 259 | status = "okay"; |
| 260 | }; |
| 261 | |
| 262 | serial@12100 { |
| 263 | status = "okay"; |
| 264 | }; |
| 265 | |
| 266 | poweroff@12100 { |
| 267 | compatible = "synology,power-off"; |
| 268 | reg = <0x12100 0x100>; |
| 269 | clocks = <&gate_clk 7>; |
| 270 | }; |
| 271 | |
| 272 | sata@80000 { |
| 273 | pinctrl-0 = <&pmx_sata0 &pmx_sata1>; |
| 274 | pinctrl-names = "default"; |
| 275 | status = "okay"; |
| 276 | nr-ports = <2>; |
| 277 | }; |
| 278 | }; |
| 279 | |
| 280 | gpio-fan-150-32-35 { |
| 281 | status = "disabled"; |
| 282 | compatible = "gpio-fan"; |
| 283 | pinctrl-0 = <&pmx_fanctrl_32 &pmx_fanctrl_33 &pmx_fanctrl_34 |
| 284 | &pmx_fanalarm_35>; |
| 285 | pinctrl-names = "default"; |
| 286 | gpios = <&gpio1 0 GPIO_ACTIVE_HIGH |
| 287 | &gpio1 1 GPIO_ACTIVE_HIGH |
| 288 | &gpio1 2 GPIO_ACTIVE_HIGH>; |
| 289 | gpio-fan,speed-map = < 0 0 |
| 290 | 2200 1 |
| 291 | 2500 2 |
| 292 | 3000 4 |
| 293 | 3300 3 |
| 294 | 3700 5 |
| 295 | 3800 6 |
| 296 | 4200 7 >; |
| 297 | }; |
| 298 | |
| 299 | gpio-fan-150-15-18 { |
| 300 | status = "disabled"; |
| 301 | compatible = "gpio-fan"; |
| 302 | pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17 |
| 303 | &pmx_fanalarm_18>; |
| 304 | pinctrl-names = "default"; |
| 305 | gpios = <&gpio0 15 GPIO_ACTIVE_HIGH |
| 306 | &gpio0 16 GPIO_ACTIVE_HIGH |
| 307 | &gpio0 17 GPIO_ACTIVE_HIGH>; |
| 308 | alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; |
| 309 | gpio-fan,speed-map = < 0 0 |
| 310 | 2200 1 |
| 311 | 2500 2 |
| 312 | 3000 4 |
| 313 | 3300 3 |
| 314 | 3700 5 |
| 315 | 3800 6 |
| 316 | 4200 7 >; |
| 317 | }; |
| 318 | |
| 319 | gpio-fan-100-32-35 { |
| 320 | status = "disabled"; |
| 321 | compatible = "gpio-fan"; |
| 322 | pinctrl-0 = <&pmx_fanctrl_32 &pmx_fanctrl_33 &pmx_fanctrl_34 |
| 323 | &pmx_fanalarm_35>; |
| 324 | pinctrl-names = "default"; |
| 325 | gpios = <&gpio1 0 GPIO_ACTIVE_HIGH |
| 326 | &gpio1 1 GPIO_ACTIVE_HIGH |
| 327 | &gpio1 2 GPIO_ACTIVE_HIGH>; |
| 328 | alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; |
| 329 | gpio-fan,speed-map = < 0 0 |
| 330 | 2500 1 |
| 331 | 3100 2 |
| 332 | 3800 3 |
| 333 | 4600 4 |
| 334 | 4800 5 |
| 335 | 4900 6 |
| 336 | 5000 7 >; |
| 337 | }; |
| 338 | |
| 339 | gpio-fan-100-15-18 { |
| 340 | status = "disabled"; |
| 341 | compatible = "gpio-fan"; |
| 342 | pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17 |
| 343 | &pmx_fanalarm_18>; |
| 344 | pinctrl-names = "default"; |
| 345 | gpios = <&gpio0 15 GPIO_ACTIVE_HIGH |
| 346 | &gpio0 16 GPIO_ACTIVE_HIGH |
| 347 | &gpio0 17 GPIO_ACTIVE_HIGH>; |
| 348 | alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; |
| 349 | gpio-fan,speed-map = < 0 0 |
| 350 | 2500 1 |
| 351 | 3100 2 |
| 352 | 3800 3 |
| 353 | 4600 4 |
| 354 | 4800 5 |
| 355 | 4900 6 |
| 356 | 5000 7 >; |
| 357 | }; |
| 358 | |
| 359 | gpio-fan-100-15-35-1 { |
| 360 | status = "disabled"; |
| 361 | compatible = "gpio-fan"; |
| 362 | pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17 |
| 363 | &pmx_fanalarm_35>; |
| 364 | pinctrl-names = "default"; |
| 365 | gpios = <&gpio0 15 GPIO_ACTIVE_HIGH |
| 366 | &gpio0 16 GPIO_ACTIVE_HIGH |
| 367 | &gpio0 17 GPIO_ACTIVE_HIGH>; |
| 368 | alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; |
| 369 | gpio-fan,speed-map = < 0 0 |
| 370 | 2500 1 |
| 371 | 3100 2 |
| 372 | 3800 3 |
| 373 | 4600 4 |
| 374 | 4800 5 |
| 375 | 4900 6 |
| 376 | 5000 7 >; |
| 377 | }; |
| 378 | |
| 379 | gpio-fan-100-15-35-3 { |
| 380 | status = "disabled"; |
| 381 | compatible = "gpio-fan"; |
| 382 | pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17 |
| 383 | &pmx_fanalarm_35 &pmx_fanalarm_44 &pmx_fanalarm_45>; |
| 384 | pinctrl-names = "default"; |
| 385 | gpios = <&gpio0 15 GPIO_ACTIVE_HIGH |
| 386 | &gpio0 16 GPIO_ACTIVE_HIGH |
| 387 | &gpio0 17 GPIO_ACTIVE_HIGH>; |
| 388 | alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH |
| 389 | &gpio1 12 GPIO_ACTIVE_HIGH |
| 390 | &gpio1 13 GPIO_ACTIVE_HIGH>; |
| 391 | gpio-fan,speed-map = < 0 0 |
| 392 | 2500 1 |
| 393 | 3100 2 |
| 394 | 3800 3 |
| 395 | 4600 4 |
| 396 | 4800 5 |
| 397 | 4900 6 |
| 398 | 5000 7 >; |
| 399 | }; |
| 400 | |
| 401 | gpio-leds-alarm-12 { |
| 402 | status = "disabled"; |
| 403 | compatible = "gpio-leds"; |
| 404 | pinctrl-0 = <&pmx_alarmled_12>; |
| 405 | pinctrl-names = "default"; |
| 406 | |
| 407 | hdd1-green { |
| 408 | label = "synology:alarm"; |
| 409 | gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; |
| 410 | }; |
| 411 | }; |
| 412 | |
| 413 | gpio-leds-hdd-20 { |
| 414 | status = "disabled"; |
| 415 | compatible = "gpio-leds"; |
| 416 | pinctrl-0 = <&pmx_hddled_20 &pmx_hddled_21 &pmx_hddled_22 |
| 417 | &pmx_hddled_23 &pmx_hddled_24 &pmx_hddled_25 |
| 418 | &pmx_hddled_26 &pmx_hddled_27>; |
| 419 | pinctrl-names = "default"; |
| 420 | |
| 421 | hdd1-green { |
| 422 | label = "synology:green:hdd1"; |
| 423 | gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; |
| 424 | }; |
| 425 | |
| 426 | hdd1-amber { |
| 427 | label = "synology:amber:hdd1"; |
| 428 | gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; |
| 429 | }; |
| 430 | |
| 431 | hdd2-green { |
| 432 | label = "synology:green:hdd2"; |
| 433 | gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; |
| 434 | }; |
| 435 | |
| 436 | hdd2-amber { |
| 437 | label = "synology:amber:hdd2"; |
| 438 | gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; |
| 439 | }; |
| 440 | |
| 441 | hdd3-green { |
| 442 | label = "synology:green:hdd3"; |
| 443 | gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; |
| 444 | }; |
| 445 | |
| 446 | hdd3-amber { |
| 447 | label = "synology:amber:hdd3"; |
| 448 | gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; |
| 449 | }; |
| 450 | |
| 451 | hdd4-green { |
| 452 | label = "synology:green:hdd4"; |
| 453 | gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; |
| 454 | }; |
| 455 | |
| 456 | hdd4-amber { |
| 457 | label = "synology:amber:hdd4"; |
| 458 | gpios = <&gpio0 27 GPIO_ACTIVE_LOW>; |
| 459 | }; |
| 460 | }; |
| 461 | |
| 462 | gpio-leds-hdd-21-1 { |
| 463 | status = "disabled"; |
| 464 | compatible = "gpio-leds"; |
| 465 | pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23>; |
| 466 | pinctrl-names = "default"; |
| 467 | |
| 468 | hdd1-green { |
| 469 | label = "synology:green:hdd1"; |
| 470 | gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; |
| 471 | }; |
| 472 | |
| 473 | hdd1-amber { |
| 474 | label = "synology:amber:hdd1"; |
| 475 | gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; |
| 476 | }; |
| 477 | }; |
| 478 | |
| 479 | gpio-leds-hdd-21-2 { |
| 480 | status = "disabled"; |
| 481 | compatible = "gpio-leds"; |
| 482 | pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23 &pmx_hddled_20 &pmx_hddled_22>; |
| 483 | pinctrl-names = "default"; |
| 484 | |
| 485 | hdd1-green { |
| 486 | label = "synology:green:hdd1"; |
| 487 | gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; |
| 488 | }; |
| 489 | |
| 490 | hdd1-amber { |
| 491 | label = "synology:amber:hdd1"; |
| 492 | gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; |
| 493 | }; |
| 494 | |
| 495 | hdd2-green { |
| 496 | label = "synology:green:hdd2"; |
| 497 | gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; |
| 498 | }; |
| 499 | |
| 500 | hdd2-amber { |
| 501 | label = "synology:amber:hdd2"; |
| 502 | gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; |
| 503 | }; |
| 504 | }; |
| 505 | |
| 506 | gpio-leds-hdd-36 { |
| 507 | status = "disabled"; |
| 508 | compatible = "gpio-leds"; |
| 509 | pinctrl-0 = <&pmx_hddled_36 &pmx_hddled_37 &pmx_hddled_38 |
| 510 | &pmx_hddled_39 &pmx_hddled_40 &pmx_hddled_41 |
| 511 | &pmx_hddled_42 &pmx_hddled_43 &pmx_hddled_44 |
| 512 | &pmx_hddled_45>; |
| 513 | pinctrl-names = "default"; |
| 514 | |
| 515 | hdd1-green { |
| 516 | label = "synology:green:hdd1"; |
| 517 | gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; |
| 518 | }; |
| 519 | |
| 520 | hdd1-amber { |
| 521 | label = "synology:amber:hdd1"; |
| 522 | gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; |
| 523 | }; |
| 524 | |
| 525 | hdd2-green { |
| 526 | label = "synology:green:hdd2"; |
| 527 | gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; |
| 528 | }; |
| 529 | |
| 530 | hdd2-amber { |
| 531 | label = "synology:amber:hdd2"; |
| 532 | gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; |
| 533 | }; |
| 534 | |
| 535 | hdd3-green { |
| 536 | label = "synology:green:hdd3"; |
| 537 | gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; |
| 538 | }; |
| 539 | |
| 540 | hdd3-amber { |
| 541 | label = "synology:amber:hdd3"; |
| 542 | gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; |
| 543 | }; |
| 544 | |
| 545 | hdd4-green { |
| 546 | label = "synology:green:hdd4"; |
| 547 | gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; |
| 548 | }; |
| 549 | |
| 550 | hdd4-amber { |
| 551 | label = "synology:amber:hdd4"; |
| 552 | gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; |
| 553 | }; |
| 554 | |
| 555 | hdd5-green { |
| 556 | label = "synology:green:hdd5"; |
| 557 | gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; |
| 558 | }; |
| 559 | |
| 560 | hdd5-amber { |
| 561 | label = "synology:amber:hdd5"; |
| 562 | gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; |
| 563 | }; |
| 564 | }; |
| 565 | |
| 566 | gpio-leds-hdd-38 { |
| 567 | status = "disabled"; |
| 568 | compatible = "gpio-leds"; |
| 569 | pinctrl-0 = <&pmx_hddled_38 &pmx_hddled_39 &pmx_hddled_36 &pmx_hddled_37>; |
| 570 | pinctrl-names = "default"; |
| 571 | |
| 572 | hdd1-green { |
| 573 | label = "synology:green:hdd1"; |
| 574 | gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; |
| 575 | }; |
| 576 | |
| 577 | hdd1-amber { |
| 578 | label = "synology:amber:hdd1"; |
| 579 | gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; |
| 580 | }; |
| 581 | |
| 582 | hdd2-green { |
| 583 | label = "synology:green:hdd2"; |
| 584 | gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; |
| 585 | }; |
| 586 | |
| 587 | hdd2-amber { |
| 588 | label = "synology:amber:hdd2"; |
| 589 | gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; |
| 590 | }; |
| 591 | }; |
| 592 | |
| 593 | regulators-hdd-29 { |
| 594 | status = "disabled"; |
| 595 | compatible = "simple-bus"; |
| 596 | #address-cells = <1>; |
| 597 | #size-cells = <0>; |
| 598 | pinctrl-0 = <&pmx_hdd1_pwr_29 &pmx_hdd2_pwr_31>; |
| 599 | pinctrl-names = "default"; |
| 600 | |
| 601 | regulator@1 { |
| 602 | compatible = "regulator-fixed"; |
| 603 | reg = <1>; |
| 604 | regulator-name = "hdd1power"; |
| 605 | regulator-min-microvolt = <5000000>; |
| 606 | regulator-max-microvolt = <5000000>; |
| 607 | enable-active-high; |
| 608 | regulator-always-on; |
| 609 | regulator-boot-on; |
| 610 | startup-delay-us = <5000000>; |
| 611 | gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>; |
| 612 | }; |
| 613 | |
| 614 | regulator@2 { |
| 615 | compatible = "regulator-fixed"; |
| 616 | reg = <2>; |
| 617 | regulator-name = "hdd2power"; |
| 618 | regulator-min-microvolt = <5000000>; |
| 619 | regulator-max-microvolt = <5000000>; |
| 620 | enable-active-high; |
| 621 | regulator-always-on; |
| 622 | regulator-boot-on; |
| 623 | startup-delay-us = <5000000>; |
| 624 | gpio = <&gpio0 31 GPIO_ACTIVE_HIGH>; |
| 625 | }; |
| 626 | }; |
| 627 | |
| 628 | regulators-hdd-30-1 { |
| 629 | status = "disabled"; |
| 630 | compatible = "simple-bus"; |
| 631 | #address-cells = <1>; |
| 632 | #size-cells = <0>; |
| 633 | pinctrl-0 = <&pmx_hdd1_pwr_30>; |
| 634 | pinctrl-names = "default"; |
| 635 | |
| 636 | regulator@1 { |
| 637 | compatible = "regulator-fixed"; |
| 638 | reg = <1>; |
| 639 | regulator-name = "hdd1power"; |
| 640 | regulator-min-microvolt = <5000000>; |
| 641 | regulator-max-microvolt = <5000000>; |
| 642 | enable-active-high; |
| 643 | regulator-always-on; |
| 644 | regulator-boot-on; |
| 645 | startup-delay-us = <5000000>; |
| 646 | gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>; |
| 647 | }; |
| 648 | }; |
| 649 | |
| 650 | regulators-hdd-30-2 { |
| 651 | status = "disabled"; |
| 652 | compatible = "simple-bus"; |
| 653 | #address-cells = <1>; |
| 654 | #size-cells = <0>; |
| 655 | pinctrl-0 = <&pmx_hdd1_pwr_30 &pmx_hdd2_pwr_34>; |
| 656 | pinctrl-names = "default"; |
| 657 | |
| 658 | regulator@1 { |
| 659 | compatible = "regulator-fixed"; |
| 660 | reg = <1>; |
| 661 | regulator-name = "hdd1power"; |
| 662 | regulator-min-microvolt = <5000000>; |
| 663 | regulator-max-microvolt = <5000000>; |
| 664 | enable-active-high; |
| 665 | regulator-always-on; |
| 666 | regulator-boot-on; |
| 667 | startup-delay-us = <5000000>; |
| 668 | gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>; |
| 669 | }; |
| 670 | |
| 671 | regulator@2 { |
| 672 | compatible = "regulator-fixed"; |
| 673 | reg = <2>; |
| 674 | regulator-name = "hdd2power"; |
| 675 | regulator-min-microvolt = <5000000>; |
| 676 | regulator-max-microvolt = <5000000>; |
| 677 | enable-active-high; |
| 678 | regulator-always-on; |
| 679 | regulator-boot-on; |
| 680 | startup-delay-us = <5000000>; |
| 681 | gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; |
| 682 | }; |
| 683 | }; |
| 684 | |
| 685 | regulators-hdd-30-4 { |
| 686 | status = "disabled"; |
| 687 | compatible = "simple-bus"; |
| 688 | #address-cells = <1>; |
| 689 | #size-cells = <0>; |
| 690 | pinctrl-0 = <&pmx_hdd1_pwr_30 &pmx_hdd2_pwr_34 |
| 691 | &pmx_hdd3_pwr_44 &pmx_hdd4_pwr_45>; |
| 692 | pinctrl-names = "default"; |
| 693 | |
| 694 | regulator@1 { |
| 695 | compatible = "regulator-fixed"; |
| 696 | reg = <1>; |
| 697 | regulator-name = "hdd1power"; |
| 698 | regulator-min-microvolt = <5000000>; |
| 699 | regulator-max-microvolt = <5000000>; |
| 700 | enable-active-high; |
| 701 | regulator-always-on; |
| 702 | regulator-boot-on; |
| 703 | startup-delay-us = <5000000>; |
| 704 | gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>; |
| 705 | }; |
| 706 | |
| 707 | regulator@2 { |
| 708 | compatible = "regulator-fixed"; |
| 709 | reg = <2>; |
| 710 | regulator-name = "hdd2power"; |
| 711 | regulator-min-microvolt = <5000000>; |
| 712 | regulator-max-microvolt = <5000000>; |
| 713 | enable-active-high; |
| 714 | regulator-always-on; |
| 715 | regulator-boot-on; |
| 716 | startup-delay-us = <5000000>; |
| 717 | gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; |
| 718 | }; |
| 719 | |
| 720 | regulator@3 { |
| 721 | compatible = "regulator-fixed"; |
| 722 | reg = <3>; |
| 723 | regulator-name = "hdd3power"; |
| 724 | regulator-min-microvolt = <5000000>; |
| 725 | regulator-max-microvolt = <5000000>; |
| 726 | enable-active-high; |
| 727 | regulator-always-on; |
| 728 | regulator-boot-on; |
| 729 | startup-delay-us = <5000000>; |
| 730 | gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; |
| 731 | }; |
| 732 | |
| 733 | regulator@4 { |
| 734 | compatible = "regulator-fixed"; |
| 735 | reg = <4>; |
| 736 | regulator-name = "hdd4power"; |
| 737 | regulator-min-microvolt = <5000000>; |
| 738 | regulator-max-microvolt = <5000000>; |
| 739 | enable-active-high; |
| 740 | regulator-always-on; |
| 741 | regulator-boot-on; |
| 742 | startup-delay-us = <5000000>; |
| 743 | gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>; |
| 744 | }; |
| 745 | }; |
| 746 | |
| 747 | regulators-hdd-31 { |
| 748 | status = "disabled"; |
| 749 | compatible = "simple-bus"; |
| 750 | #address-cells = <1>; |
| 751 | #size-cells = <0>; |
| 752 | pinctrl-0 = <&pmx_hdd2_pwr_31>; |
| 753 | pinctrl-names = "default"; |
| 754 | |
| 755 | regulator@1 { |
| 756 | compatible = "regulator-fixed"; |
| 757 | reg = <1>; |
| 758 | regulator-name = "hdd2power"; |
| 759 | regulator-min-microvolt = <5000000>; |
| 760 | regulator-max-microvolt = <5000000>; |
| 761 | enable-active-high; |
| 762 | regulator-always-on; |
| 763 | regulator-boot-on; |
| 764 | startup-delay-us = <5000000>; |
| 765 | gpio = <&gpio0 31 GPIO_ACTIVE_HIGH>; |
| 766 | }; |
| 767 | }; |
| 768 | |
| 769 | regulators-hdd-34 { |
| 770 | status = "disabled"; |
| 771 | compatible = "simple-bus"; |
| 772 | #address-cells = <1>; |
| 773 | #size-cells = <0>; |
| 774 | pinctrl-0 = <&pmx_hdd2_pwr_34 &pmx_hdd3_pwr_44 |
| 775 | &pmx_hdd4_pwr_45>; |
| 776 | pinctrl-names = "default"; |
| 777 | |
| 778 | regulator@2 { |
| 779 | compatible = "regulator-fixed"; |
| 780 | reg = <2>; |
| 781 | regulator-name = "hdd2power"; |
| 782 | regulator-min-microvolt = <5000000>; |
| 783 | regulator-max-microvolt = <5000000>; |
| 784 | enable-active-high; |
| 785 | regulator-always-on; |
| 786 | regulator-boot-on; |
| 787 | startup-delay-us = <5000000>; |
| 788 | gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; |
| 789 | }; |
| 790 | |
| 791 | regulator@3 { |
| 792 | compatible = "regulator-fixed"; |
| 793 | reg = <3>; |
| 794 | regulator-name = "hdd3power"; |
| 795 | regulator-min-microvolt = <5000000>; |
| 796 | regulator-max-microvolt = <5000000>; |
| 797 | enable-active-high; |
| 798 | regulator-always-on; |
| 799 | regulator-boot-on; |
| 800 | startup-delay-us = <5000000>; |
| 801 | gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; |
| 802 | }; |
| 803 | |
| 804 | regulator@4 { |
| 805 | compatible = "regulator-fixed"; |
| 806 | reg = <4>; |
| 807 | regulator-name = "hdd4power"; |
| 808 | regulator-min-microvolt = <5000000>; |
| 809 | regulator-max-microvolt = <5000000>; |
| 810 | enable-active-high; |
| 811 | regulator-always-on; |
| 812 | regulator-boot-on; |
| 813 | startup-delay-us = <5000000>; |
| 814 | gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>; |
| 815 | }; |
| 816 | }; |
| 817 | }; |
| 818 | |
| 819 | &mdio { |
| 820 | status = "okay"; |
| 821 | |
| 822 | ethphy0: ethernet-phy@0 { |
| 823 | device_type = "ethernet-phy"; |
| 824 | reg = <8>; |
| 825 | }; |
| 826 | |
| 827 | ethphy1: ethernet-phy@1 { |
| 828 | device_type = "ethernet-phy"; |
| 829 | reg = <9>; |
| 830 | }; |
| 831 | }; |
| 832 | |
| 833 | ð0 { |
| 834 | status = "okay"; |
| 835 | |
| 836 | ethernet0-port@0 { |
| 837 | phy-handle = <ðphy0>; |
| 838 | }; |
| 839 | }; |
| 840 | |
| 841 | ð1 { |
| 842 | status = "disabled"; |
| 843 | |
| 844 | ethernet1-port@0 { |
| 845 | phy-handle = <ðphy1>; |
| 846 | }; |
| 847 | }; |
| 848 | |
| 849 | &pciec { |
| 850 | status = "okay"; |
| 851 | }; |
| 852 | |
| 853 | &pcie0 { |
| 854 | status = "okay"; |
| 855 | }; |