blob: b092933757ed5a37e6e52ef99385122c668fb7b0 [file] [log] [blame]
Prabhakar Kushwaha7530d342012-04-24 20:17:15 +00001/*
2 * Copyright 2011-2012 Freescale Semiconductor, Inc.
3 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02004 * SPDX-License-Identifier: GPL-2.0+
Prabhakar Kushwaha7530d342012-04-24 20:17:15 +00005 */
6
7/*
8 * BSC9131 RDB board configuration file
9 */
10
11#ifndef __CONFIG_H
12#define __CONFIG_H
13
harninder rai4aafbb42014-12-02 15:55:47 +053014#define CONFIG_DISPLAY_BOARDINFO
15
Prabhakar Kushwaha7530d342012-04-24 20:17:15 +000016#ifdef CONFIG_BSC9131RDB
17#define CONFIG_BSC9131
18#define CONFIG_NAND_FSL_IFC
19#endif
20
21#ifdef CONFIG_SPIFLASH
22#define CONFIG_RAMBOOT_SPIFLASH
23#define CONFIG_SYS_RAMBOOT
24#define CONFIG_SYS_EXTRA_ENV_RELOC
25#define CONFIG_SYS_TEXT_BASE 0x11000000
Prabhakar Kushwahae222b1f2014-01-14 11:34:26 +053026#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc
Prabhakar Kushwaha7530d342012-04-24 20:17:15 +000027#endif
28
Prabhakar Kushwahaf1593262013-04-16 13:28:25 +053029#ifdef CONFIG_NAND
Prabhakar Kushwahaf1593262013-04-16 13:28:25 +053030#define CONFIG_SPL_INIT_MINIMAL
31#define CONFIG_SPL_SERIAL_SUPPORT
32#define CONFIG_SPL_NAND_SUPPORT
Prabhakar Kushwahafbe76ae2013-12-11 12:42:11 +053033#define CONFIG_SPL_NAND_BOOT
Prabhakar Kushwahaf1593262013-04-16 13:28:25 +053034#define CONFIG_SPL_FLUSH_IMAGE
35#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
36
37#define CONFIG_SYS_TEXT_BASE 0x00201000
38#define CONFIG_SPL_TEXT_BASE 0xFFFFE000
39#define CONFIG_SPL_MAX_SIZE 8192
40#define CONFIG_SPL_RELOC_TEXT_BASE 0x00100000
41#define CONFIG_SPL_RELOC_STACK 0x00100000
Prabhakar Kushwahae222b1f2014-01-14 11:34:26 +053042#define CONFIG_SYS_NAND_U_BOOT_SIZE ((768 << 10) - 0x2000)
Prabhakar Kushwahaf1593262013-04-16 13:28:25 +053043#define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE)
44#define CONFIG_SYS_NAND_U_BOOT_START 0x00200000
45#define CONFIG_SYS_NAND_U_BOOT_OFFS 0
46#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
Prabhakar Kushwaha7530d342012-04-24 20:17:15 +000047#endif
48
Prabhakar Kushwahaf1593262013-04-16 13:28:25 +053049#ifdef CONFIG_SPL_BUILD
50#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
51#else
52#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
53#endif
54
Prabhakar Kushwaha7530d342012-04-24 20:17:15 +000055/* High Level Configuration Options */
56#define CONFIG_BOOKE /* BOOKE */
57#define CONFIG_E500 /* BOOKE e500 family */
Prabhakar Kushwaha7530d342012-04-24 20:17:15 +000058#define CONFIG_FSL_IFC /* Enable IFC Support */
Ruchika Gupta737537e2014-10-15 11:35:31 +053059#define CONFIG_FSL_CAAM /* Enable SEC/CAAM */
Prabhakar Kushwaha7530d342012-04-24 20:17:15 +000060
61#define CONFIG_FSL_LAW /* Use common FSL init code */
62#define CONFIG_TSEC_ENET
63#define CONFIG_ENV_OVERWRITE
64
65#define CONFIG_DDR_CLK_FREQ 66666666 /* DDRCLK on 9131 RDB */
Priyanka Jain087cf442013-04-01 12:12:45 +053066#if defined(CONFIG_SYS_CLK_100)
67#define CONFIG_SYS_CLK_FREQ 100000000 /* SYSCLK for 9131 RDB */
68#else
Prabhakar Kushwaha7530d342012-04-24 20:17:15 +000069#define CONFIG_SYS_CLK_FREQ 66666666 /* SYSCLK for 9131 RDB */
Priyanka Jain087cf442013-04-01 12:12:45 +053070#endif
Prabhakar Kushwaha7530d342012-04-24 20:17:15 +000071
72#define CONFIG_HWCONFIG
73/*
74 * These can be toggled for performance analysis, otherwise use default.
75 */
76#define CONFIG_L2_CACHE /* toggle L2 cache */
77#define CONFIG_BTB /* enable branch predition */
78
79#define CONFIG_SYS_MEMTEST_START 0x01000000 /* memtest works on */
80#define CONFIG_SYS_MEMTEST_END 0x01ffffff
81
82/* DDR Setup */
York Sun5614e712013-09-30 09:22:09 -070083#define CONFIG_SYS_FSL_DDR3
Prabhakar Kushwaha7530d342012-04-24 20:17:15 +000084#undef CONFIG_SYS_DDR_RAW_TIMING
85#undef CONFIG_DDR_SPD
86#define CONFIG_SYS_SPD_BUS_NUM 0
87#define SPD_EEPROM_ADDRESS 0x52 /* I2C access */
88
89#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
90
91#ifndef __ASSEMBLY__
92extern unsigned long get_sdram_size(void);
93#endif
94#define CONFIG_SYS_SDRAM_SIZE get_sdram_size() /* DDR size */
95#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
96#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
97
98#define CONFIG_NUM_DDR_CONTROLLERS 1
99#define CONFIG_DIMM_SLOTS_PER_CTLR 1
100#define CONFIG_CHIP_SELECTS_PER_CTRL 1
101
102#define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f
103#define CONFIG_SYS_DDR_CS0_CONFIG 0x80014302
104#define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000
105
106#define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef
107#define CONFIG_SYS_DDR_INIT_ADDR 0x00000000
108#define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000
109#define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000
110
111#define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600
112#define CONFIG_SYS_DDR_SR_CNTR 0x00000000
113#define CONFIG_SYS_DDR_RCW_1 0x00000000
114#define CONFIG_SYS_DDR_RCW_2 0x00000000
115#define CONFIG_SYS_DDR_CONTROL 0xC70C0000 /* Type = DDR3 */
116#define CONFIG_SYS_DDR_CONTROL_2 0x24401000
117#define CONFIG_SYS_DDR_TIMING_4 0x00000001
118#define CONFIG_SYS_DDR_TIMING_5 0x02401400
119
120#define CONFIG_SYS_DDR_TIMING_3_800 0x00030000
121#define CONFIG_SYS_DDR_TIMING_0_800 0x00110104
122#define CONFIG_SYS_DDR_TIMING_1_800 0x6f6b8644
123#define CONFIG_SYS_DDR_TIMING_2_800 0x0fa888cf
124#define CONFIG_SYS_DDR_CLK_CTRL_800 0x03000000
125#define CONFIG_SYS_DDR_MODE_1_800 0x00441420
126#define CONFIG_SYS_DDR_MODE_2_800 0x8000c000
127#define CONFIG_SYS_DDR_INTERVAL_800 0x0c300100
128#define CONFIG_SYS_DDR_WRLVL_CONTROL_800 0x8675f608
129
130/*
131 * Base addresses -- Note these are effective addresses where the
132 * actual resources get mapped (not physical addresses)
133 */
134/* relocated CCSRBAR */
135#define CONFIG_SYS_CCSRBAR CONFIG_SYS_CCSRBAR_DEFAULT
136#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR_DEFAULT
137
138#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses */
139 /* CONFIG_SYS_IMMR */
Priyanka Jain765b0bd2013-04-04 09:31:54 +0530140/* DSP CCSRBAR */
141#define CONFIG_SYS_FSL_DSP_CCSRBAR CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
142#define CONFIG_SYS_FSL_DSP_CCSRBAR_PHYS CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
Prabhakar Kushwaha7530d342012-04-24 20:17:15 +0000143
144/*
145 * Memory map
146 *
147 * 0x0000_0000 0x3FFF_FFFF DDR 1G cacheable
148 * 0x8800_0000 0x8810_0000 IFC internal SRAM 1M
Priyanka Jain765b0bd2013-04-04 09:31:54 +0530149 * 0xB000_0000 0xB0FF_FFFF DSP core M2 memory 16M
Prabhakar Kushwaha7530d342012-04-24 20:17:15 +0000150 * 0xC100_0000 0xC13F_FFFF MAPLE-2F 4M
151 * 0xC1F0_0000 0xC1F3_FFFF PA L2 SRAM Region 0 256K
152 * 0xC1F8_0000 0xC1F9_FFFF PA L2 SRAM Region 1 128K
153 * 0xFED0_0000 0xFED0_3FFF SEC Secured RAM 16K
Priyanka Jain765b0bd2013-04-04 09:31:54 +0530154 * 0xFF60_0000 0xFF6F_FFFF DSP CCSR 1M
Prabhakar Kushwaha7530d342012-04-24 20:17:15 +0000155 * 0xFF70_0000 0xFF7F_FFFF PA CCSR 1M
156 * 0xFF80_0000 0xFFFF_FFFF Boot Page & NAND flash buffer 8M
157 *
158 */
159
160/*
161 * IFC Definitions
162 */
163#define CONFIG_SYS_NO_FLASH
164
165/* NAND Flash on IFC */
166#define CONFIG_SYS_NAND_BASE 0xff800000
167#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE
168
169#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
170 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit*/ \
171 | CSPR_MSEL_NAND /* MSEL = NAND */ \
172 | CSPR_V)
173#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024)
174
175#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \
176 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \
177 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \
178 | CSOR_NAND_RAL_2 /* RAL = 2Byes */ \
179 | CSOR_NAND_PGS_2K /* Page Size = 2K */ \
180 | CSOR_NAND_SPRZ_64 /* Spare size = 64 */ \
181 | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/
182
183/* NAND Flash Timing Params */
Prabhakar Kushwaha4544fd22013-09-10 17:33:12 +0530184#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x03) \
185 | FTIM0_NAND_TWP(0x05) \
186 | FTIM0_NAND_TWCHT(0x02) \
Prabhakar Kushwaha7530d342012-04-24 20:17:15 +0000187 | FTIM0_NAND_TWH(0x04))
Prabhakar Kushwaha4544fd22013-09-10 17:33:12 +0530188#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x1C) \
189 | FTIM1_NAND_TWBE(0x1E) \
190 | FTIM1_NAND_TRR(0x07) \
Prabhakar Kushwaha7530d342012-04-24 20:17:15 +0000191 | FTIM1_NAND_TRP(0x05))
192#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x08) \
193 | FTIM2_NAND_TREH(0x04) \
Prabhakar Kushwaha4544fd22013-09-10 17:33:12 +0530194 | FTIM2_NAND_TWHRE(0x11))
195#define CONFIG_SYS_NAND_FTIM3 FTIM3_NAND_TWW(0x04)
Prabhakar Kushwaha7530d342012-04-24 20:17:15 +0000196
197#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
198#define CONFIG_SYS_MAX_NAND_DEVICE 1
Prabhakar Kushwaha7530d342012-04-24 20:17:15 +0000199#define CONFIG_CMD_NAND
200#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
201
202#define CONFIG_SYS_NAND_DDR_LAW 11
203
204/* Set up IFC registers for boot location NAND */
205#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR
206#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK
207#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR
208#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0
209#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1
210#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2
211#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3
212
213#define CONFIG_BOARD_EARLY_INIT_F /* Call board_pre_init */
214
215#define CONFIG_SYS_INIT_RAM_LOCK
216#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */
York Sunb39d1212016-04-06 13:22:10 -0700217#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000/* End of used area in RAM */
Prabhakar Kushwaha7530d342012-04-24 20:17:15 +0000218
York Sunb39d1212016-04-06 13:22:10 -0700219#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \
Prabhakar Kushwaha7530d342012-04-24 20:17:15 +0000220 - GENERATED_GBL_DATA_SIZE)
221#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
222
Prabhakar Kushwaha9307cba2014-03-31 15:31:48 +0530223#define CONFIG_SYS_MONITOR_LEN (768 * 1024)
Prabhakar Kushwaha7530d342012-04-24 20:17:15 +0000224#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc*/
225
226/* Serial Port */
227#define CONFIG_CONS_INDEX 1
228#undef CONFIG_SERIAL_SOFTWARE_FIFO
Prabhakar Kushwaha7530d342012-04-24 20:17:15 +0000229#define CONFIG_SYS_NS16550_SERIAL
230#define CONFIG_SYS_NS16550_REG_SIZE 1
231#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
Prabhakar Kushwahaf1593262013-04-16 13:28:25 +0530232#ifdef CONFIG_SPL_BUILD
233#define CONFIG_NS16550_MIN_FUNCTIONS
234#endif
Prabhakar Kushwaha7530d342012-04-24 20:17:15 +0000235
236#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */
237
238#define CONFIG_SYS_BAUDRATE_TABLE \
239 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
240
241#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
242
Heiko Schocher00f792e2012-10-24 13:48:22 +0200243#define CONFIG_SYS_I2C
244#define CONFIG_SYS_I2C_FSL
245#define CONFIG_SYS_FSL_I2C_SPEED 400000
246#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
247#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000
Prabhakar Kushwaha7530d342012-04-24 20:17:15 +0000248
249/* I2C EEPROM */
250#define CONFIG_CMD_EEPROM
Prabhakar Kushwaha7530d342012-04-24 20:17:15 +0000251#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
252#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
253#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
254
Prabhakar Kushwaha7530d342012-04-24 20:17:15 +0000255/* eSPI - Enhanced SPI */
256#ifdef CONFIG_FSL_ESPI
Prabhakar Kushwaha7530d342012-04-24 20:17:15 +0000257#define CONFIG_SF_DEFAULT_SPEED 10000000
258#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
259#endif
260
261#if defined(CONFIG_TSEC_ENET)
262
263#define CONFIG_MII /* MII PHY management */
264#define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */
265#define CONFIG_TSEC1 1
266#define CONFIG_TSEC1_NAME "eTSEC1"
267#define CONFIG_TSEC2 1
268#define CONFIG_TSEC2_NAME "eTSEC2"
269
270#define TSEC1_PHY_ADDR 0
271#define TSEC2_PHY_ADDR 3
272
273#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
274#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
275
276#define TSEC1_PHYIDX 0
277
278#define TSEC2_PHYIDX 0
279
280#define CONFIG_ETHPRIME "eTSEC1"
281
282#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
283
284#endif /* CONFIG_TSEC_ENET */
285
286/*
287 * Environment
288 */
Prabhakar Kushwaha7530d342012-04-24 20:17:15 +0000289#if defined(CONFIG_RAMBOOT_SPIFLASH)
290#define CONFIG_ENV_IS_IN_SPI_FLASH
291#define CONFIG_ENV_SPI_BUS 0
292#define CONFIG_ENV_SPI_CS 0
293#define CONFIG_ENV_SPI_MAX_HZ 10000000
294#define CONFIG_ENV_SPI_MODE 0
295#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */
296#define CONFIG_ENV_SECT_SIZE 0x10000
297#define CONFIG_ENV_SIZE 0x2000
Prabhakar Kushwahaf1593262013-04-16 13:28:25 +0530298#elif defined(CONFIG_NAND)
299#define CONFIG_ENV_IS_IN_NAND
300#define CONFIG_SYS_EXTRA_ENV_RELOC
301#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
Prabhakar Kushwahae222b1f2014-01-14 11:34:26 +0530302#define CONFIG_ENV_OFFSET ((768 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
Prabhakar Kushwahaf1593262013-04-16 13:28:25 +0530303#define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE)
304#elif defined(CONFIG_SYS_RAMBOOT)
305#define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */
Prabhakar Kushwaha7530d342012-04-24 20:17:15 +0000306#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
Prabhakar Kushwahaf1593262013-04-16 13:28:25 +0530307#define CONFIG_ENV_SIZE 0x2000
Prabhakar Kushwaha7530d342012-04-24 20:17:15 +0000308#endif
309
310#define CONFIG_LOADS_ECHO /* echo on for serial download */
311#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
312
313/*
314 * Command line configuration.
315 */
Prabhakar Kushwaha7530d342012-04-24 20:17:15 +0000316#define CONFIG_CMD_ERRATA
Prabhakar Kushwaha7530d342012-04-24 20:17:15 +0000317#define CONFIG_CMD_IRQ
Prabhakar Kushwaha7530d342012-04-24 20:17:15 +0000318#define CONFIG_DOS_PARTITION
Prabhakar Kushwaha7530d342012-04-24 20:17:15 +0000319#define CONFIG_CMD_REGINFO
Prabhakar Kushwaha7530d342012-04-24 20:17:15 +0000320
321/*
322 * Miscellaneous configurable options
323 */
324#define CONFIG_SYS_LONGHELP /* undef to save memory */
325#define CONFIG_CMDLINE_EDITING /* Command-line editing */
326#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
327#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
Prabhakar Kushwaha7530d342012-04-24 20:17:15 +0000328
329#if defined(CONFIG_CMD_KGDB)
330#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
331#else
332#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
333#endif
334#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
335 /* Print Buffer Size */
336#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
337#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
Prabhakar Kushwaha7530d342012-04-24 20:17:15 +0000338
339/*
340 * For booting Linux, the board info and command line data
341 * have to be in the first 64 MB of memory, since this is
342 * the maximum mapped by the Linux kernel during initialization.
343 */
344#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux */
345#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
346
347#if defined(CONFIG_CMD_KGDB)
348#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
Prabhakar Kushwaha7530d342012-04-24 20:17:15 +0000349#endif
350
Ruchika Gupta737537e2014-10-15 11:35:31 +0530351/* Hash command with SHA acceleration supported in hardware */
352#ifdef CONFIG_FSL_CAAM
353#define CONFIG_CMD_HASH
354#define CONFIG_SHA_HW_ACCEL
355#endif
356
Prabhakar Kushwaha7530d342012-04-24 20:17:15 +0000357#define CONFIG_USB_EHCI
358
359#ifdef CONFIG_USB_EHCI
Prabhakar Kushwaha7530d342012-04-24 20:17:15 +0000360#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
361#define CONFIG_USB_EHCI_FSL
362#define CONFIG_USB_STORAGE
363#define CONFIG_HAS_FSL_DR_USB
364#endif
365
366/*
Ashish Kumar7ac1a242014-10-07 18:02:23 +0530367 * Dynamic MTD Partition support with mtdparts
368 */
369#define CONFIG_MTD_DEVICE
370#define CONFIG_MTD_PARTITIONS
371#define CONFIG_CMD_MTDPARTS
372#define MTDIDS_DEFAULT "nand0=ff800000.flash,"
373#define MTDPARTS_DEFAULT "mtdparts=ff800000.flash:1m(uboot)," \
374 "8m(kernel),512k(dtb),-(fs)"
375/*
376 * Override partitions in device tree using info
377 * in "mtdparts" environment variable
378 */
379#ifdef CONFIG_CMD_MTDPARTS
380#define CONFIG_FDT_FIXUP_PARTITIONS
381#endif
382
383/*
Prabhakar Kushwaha7530d342012-04-24 20:17:15 +0000384 * Environment Configuration
385 */
386
387#if defined(CONFIG_TSEC_ENET)
388#define CONFIG_HAS_ETH0
389#endif
390
391#define CONFIG_HOSTNAME BSC9131rdb
392#define CONFIG_ROOTPATH "/opt/nfsroot"
393#define CONFIG_BOOTFILE "uImage"
394#define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server */
395
396#define CONFIG_BAUDRATE 115200
harninder rai37811ec2014-12-15 12:58:45 +0530397#define CONFIG_BOOTDELAY 10 /* -1 disable auto-boot */
Prabhakar Kushwaha7530d342012-04-24 20:17:15 +0000398
399#define CONFIG_EXTRA_ENV_SETTINGS \
400 "netdev=eth0\0" \
401 "uboot=" CONFIG_UBOOTPATH "\0" \
402 "loadaddr=1000000\0" \
403 "bootfile=uImage\0" \
404 "consoledev=ttyS0\0" \
405 "ramdiskaddr=2000000\0" \
406 "ramdiskfile=rootfs.ext2.gz.uboot\0" \
407 "fdtaddr=c00000\0" \
408 "fdtfile=bsc9131rdb.dtb\0" \
409 "bdev=sda1\0" \
410 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0" \
Priyanka Jain1d2949a2013-04-04 14:40:32 +0530411 "bootm_size=0x37000000\0" \
412 "othbootargs=ramdisk_size=600000 " \
413 "default_hugepagesz=256m hugepagesz=256m hugepages=1\0" \
Prabhakar Kushwaha7530d342012-04-24 20:17:15 +0000414 "usbext2boot=setenv bootargs root=/dev/ram rw " \
415 "console=$consoledev,$baudrate $othbootargs; " \
416 "usb start;" \
417 "ext2load usb 0:4 $loadaddr $bootfile;" \
418 "ext2load usb 0:4 $fdtaddr $fdtfile;" \
419 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \
420 "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \
421
422#define CONFIG_RAMBOOTCOMMAND \
423 "setenv bootargs root=/dev/ram rw " \
424 "console=$consoledev,$baudrate $othbootargs; " \
425 "tftp $ramdiskaddr $ramdiskfile;" \
426 "tftp $loadaddr $bootfile;" \
427 "tftp $fdtaddr $fdtfile;" \
428 "bootm $loadaddr $ramdiskaddr $fdtaddr"
429
430#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
431
432#endif /* __CONFIG_H */