blob: 0eeffd46377bfa8548a3b4da326ebe04dba9a28c [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001/* SPDX-License-Identifier: GPL-2.0+ */
Akshay Bhatf9162b12016-01-29 15:16:40 -05002/*
3 * Copyright (C) 2015 Timesys Corporation
4 * Copyright (C) 2015 General Electric Company
5 * Copyright (C) 2014 Advantech
6 * Copyright (C) 2012 Freescale Semiconductor, Inc.
7 *
8 * Configuration settings for the GE MX6Q Bx50v3 boards.
Akshay Bhatf9162b12016-01-29 15:16:40 -05009 */
10
11#ifndef __GE_BX50V3_CONFIG_H
12#define __GE_BX50V3_CONFIG_H
13
14#include <asm/arch/imx-regs.h>
Stefano Babic552a8482017-06-29 10:16:06 +020015#include <asm/mach-imx/gpio.h>
Akshay Bhatf9162b12016-01-29 15:16:40 -050016
Ian Ray51a42be2018-04-25 16:57:04 +020017#define CONFIG_BOARD_NAME "General Electric Bx50v3"
Akshay Bhatf9162b12016-01-29 15:16:40 -050018
Akshay Bhatf9162b12016-01-29 15:16:40 -050019#include "mx6_common.h"
20#include <linux/sizes.h>
21
Akshay Bhatf9162b12016-01-29 15:16:40 -050022/* SATA Configs */
Andrew Shaduraaacc10c2016-05-24 15:56:21 +020023#ifdef CONFIG_CMD_SATA
Akshay Bhatf9162b12016-01-29 15:16:40 -050024#define CONFIG_SYS_SATA_MAX_DEVICE 1
25#define CONFIG_DWC_AHSATA_PORT_ID 0
26#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
27#define CONFIG_LBA48
Andrew Shaduraaacc10c2016-05-24 15:56:21 +020028#endif
Akshay Bhatf9162b12016-01-29 15:16:40 -050029
Ian Rayf2ac6f72020-11-04 17:18:39 +010030#ifdef CONFIG_CMD_NFS
Joonas Aijalab026c822019-01-31 16:21:20 +020031#define NETWORKBOOT \
32 "setnetworkboot=" \
33 "setenv ipaddr 172.16.2.10; setenv serverip 172.16.2.20; " \
34 "setenv gatewayip 172.16.2.20; setenv nfsserver 172.16.2.20; " \
35 "setenv netmask 255.255.255.0; setenv ethaddr ca:fe:de:ca:f0:11; " \
36 "setenv bootargs root=/dev/nfs nfsroot=${nfsserver}:/srv/nfs/,v3,tcp rw rootwait" \
37 "setenv bootargs $bootargs ip=${ipaddr}:${nfsserver}:${gatewayip}:${netmask}::eth0:off " \
Ian Ray4f1970f2020-11-04 17:18:43 +010038 "setenv bootargs $bootargs cma=128M bootcause=${bootcause} ${videoargs} " \
Joonas Aijalab026c822019-01-31 16:21:20 +020039 "setenv bootargs $bootargs systemd.mask=helix-network-defaults.service " \
40 "setenv bootargs $bootargs watchdog.handle_boot_enabled=1\0" \
41 "networkboot=" \
42 "run setnetworkboot; " \
43 "nfs ${loadaddr} /srv/nfs/fitImage; " \
Sebastian Reichelc44d3742020-12-15 00:41:56 +010044 "bootm ${loadaddr}\0" \
Joonas Aijalab026c822019-01-31 16:21:20 +020045
Tom Rini7ae1b082021-08-19 14:29:00 -040046#define NETWORKBOOTCOMMAND \
Joonas Aijalab026c822019-01-31 16:21:20 +020047 "run networkboot; " \
48
49#else
50#define NETWORKBOOT \
51
52#endif
53
Akshay Bhatf9162b12016-01-29 15:16:40 -050054#define CONFIG_EXTRA_ENV_SETTINGS \
Joonas Aijalab026c822019-01-31 16:21:20 +020055 NETWORKBOOT \
Ian Rayf07b3142018-01-10 20:31:33 +010056 "image=/boot/fitImage\0" \
Ian Ray9e41b542018-01-10 20:31:37 +010057 "dev=mmc\0" \
Ian Rayefc260a2019-01-31 16:21:12 +020058 "devnum=2\0" \
Ian Ray9e41b542018-01-10 20:31:37 +010059 "rootdev=mmcblk0p\0" \
60 "quiet=quiet loglevel=0\0" \
Ian Ray9e41b542018-01-10 20:31:37 +010061 "setargs=setenv bootargs root=/dev/${rootdev}${partnum} " \
62 "ro rootwait cma=128M " \
63 "bootcause=${bootcause} " \
Robert Becketta7072812020-01-31 15:08:01 +020064 "${quiet} " \
Ian Ray06a3e432018-04-25 16:57:03 +020065 "${videoargs}" "\0" \
Ian Ray9e41b542018-01-10 20:31:37 +010066 "doquiet=" \
67 "if ext2load ${dev} ${devnum}:5 0x7000A000 /boot/console; " \
68 "then setenv quiet; fi\0" \
69 "hasfirstboot=" \
Robert Beckett5e13def2020-01-31 15:08:03 +020070 "test -e ${dev} ${devnum}:${partnum} /boot/bootcause/firstboot\0" \
Ian Ray9e41b542018-01-10 20:31:37 +010071 "swappartitions=" \
72 "setexpr partnum 3 - ${partnum}\0" \
73 "failbootcmd=" \
Robert Beckett92faf432020-01-31 15:07:59 +020074 "cls; " \
Ian Rayc6b31ca2019-11-12 19:15:15 +000075 "setcurs 5 4; " \
76 "lcdputs \"Monitor failed to start. " \
77 "Try again, or contact GE Service for support.\"; " \
Ian Ray3a543552021-04-23 16:15:13 +020078 "bootcount reset; " \
79 "while true; do sleep 1; done; \0" \
Ian Ray9e41b542018-01-10 20:31:37 +010080 "altbootcmd=" \
81 "run doquiet; " \
82 "setenv partnum 1; run hasfirstboot || setenv partnum 2; " \
83 "run hasfirstboot || setenv partnum 0; " \
84 "if test ${partnum} != 0; then " \
Ian Ray9e41b542018-01-10 20:31:37 +010085 "run swappartitions loadimage doboot; " \
86 "fi; " \
87 "run failbootcmd\0" \
Akshay Bhatf9162b12016-01-29 15:16:40 -050088 "loadimage=" \
89 "ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
Ian Ray9e41b542018-01-10 20:31:37 +010090 "doboot=" \
91 "echo Booting from ${dev}:${devnum}:${partnum} ...; " \
Akshay Bhatf9162b12016-01-29 15:16:40 -050092 "run setargs; " \
Sebastian Reichelc44d3742020-12-15 00:41:56 +010093 "bootm ${loadaddr}\0" \
Ian Ray9e41b542018-01-10 20:31:37 +010094 "tryboot=" \
95 "setenv partnum 1; run hasfirstboot || setenv partnum 2; " \
96 "run loadimage || run swappartitions && run loadimage || " \
Ian Rayee77bb52021-04-23 16:15:12 +020097 "setenv partnum 0 && echo MISSING IMAGE;" \
Ian Ray9e41b542018-01-10 20:31:37 +010098 "run doboot; " \
99 "run failbootcmd\0" \
Akshay Bhatf9162b12016-01-29 15:16:40 -0500100
Tom Rini7ae1b082021-08-19 14:29:00 -0400101#define MMCBOOTCOMMAND \
Ian Rayee77bb52021-04-23 16:15:12 +0200102 "run doquiet; " \
103 "run tryboot; " \
Andrew Shadurafc449022016-05-24 15:56:19 +0200104
Ian Rayf2ac6f72020-11-04 17:18:39 +0100105#ifdef CONFIG_CMD_NFS
Tom Rini7ae1b082021-08-19 14:29:00 -0400106#define CONFIG_BOOTCOMMAND NETWORKBOOTCOMMAND
Andrew Shadurafc449022016-05-24 15:56:19 +0200107#else
Tom Rini7ae1b082021-08-19 14:29:00 -0400108#define CONFIG_BOOTCOMMAND MMCBOOTCOMMAND
Andrew Shadurafc449022016-05-24 15:56:19 +0200109#endif
110
Akshay Bhatf9162b12016-01-29 15:16:40 -0500111/* Physical Memory Map */
Akshay Bhatf9162b12016-01-29 15:16:40 -0500112#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
113
Ian Raya19d7372020-01-31 15:08:04 +0200114#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* 256M */
115
Akshay Bhatf9162b12016-01-29 15:16:40 -0500116#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
117#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
118#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
119
120#define CONFIG_SYS_INIT_SP_OFFSET \
121 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
122#define CONFIG_SYS_INIT_SP_ADDR \
123 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
124
Masahiro Yamadae856bdc2017-02-11 22:43:54 +0900125/* environment organization */
Akshay Bhatf9162b12016-01-29 15:16:40 -0500126
Akshay Bhatf9162b12016-01-29 15:16:40 -0500127#define CONFIG_SYS_FSL_USDHC_NUM 3
128
129/* Framebuffer */
Ian Ray9e41b542018-01-10 20:31:37 +0100130#define CONFIG_HIDE_LOGO_VERSION
Akshay Bhatf9162b12016-01-29 15:16:40 -0500131#define CONFIG_IMX_HDMI
132#define CONFIG_IMX_VIDEO_SKIP
133
Akshay Bhat54971ac2016-04-12 18:13:59 -0400134#define CONFIG_IMX6_PWM_PER_CLK 66000000
135
Akshay Bhatf9162b12016-01-29 15:16:40 -0500136#define CONFIG_PCI_SCAN_SHOW
137#define CONFIG_PCIE_IMX
Akshay Bhatf9162b12016-01-29 15:16:40 -0500138#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(1, 5)
Akshay Bhatf9162b12016-01-29 15:16:40 -0500139
Akshay Bhatf9162b12016-01-29 15:16:40 -0500140#endif /* __GE_BX50V3_CONFIG_H */