Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / a2db09e26993298c5469072660e9352feded824f / . / include / configs / usb_a9263.h
blob: c12e53690d0fa3ec603f6e357347b04b3a37f744 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -0400[diff] [blame]1/* SPDX-License-Identifier: GPL-2.0+ */
Mateusz Kulikowski1dcdd862013-12-02 23:30:58 +0100[diff] [blame]2/*
3 * (C) Copyright 2007-2013
4 * Stelian Pop <stelian.pop@leadtechdesign.com>
5 * Lead Tech Design <www.leadtechdesign.com>
6 * Thomas Petazzoni, Free Electrons, <thomas.petazzoni@free-electrons.com>
7 * Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
8 *
9 * Settings for Calao USB-A9263 board
10 *
11 * U-Boot image has to be less than 200704 bytes, otherwise at91bootstrap
12 * installed on board will not be able to load it properly.
Mateusz Kulikowski1dcdd862013-12-02 23:30:58 +0100[diff] [blame]13 */
14
15#ifndef __CONFIG_H
16#define __CONFIG_H
17#include <asm/hardware.h>
18
19/* ARM asynchronous clock */
20#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */
21#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
Mateusz Kulikowski1dcdd862013-12-02 23:30:58 +0100[diff] [blame]22
Mateusz Kulikowski1dcdd862013-12-02 23:30:58 +0100[diff] [blame]23/*
24 * Hardware drivers
25 */
Mateusz Kulikowski1dcdd862013-12-02 23:30:58 +0100[diff] [blame]26/*
27 * BOOTP options
28 */
29#define CONFIG_BOOTP_BOOTFILESIZE
Mateusz Kulikowski1dcdd862013-12-02 23:30:58 +0100[diff] [blame]30
Mateusz Kulikowski1dcdd862013-12-02 23:30:58 +0100[diff] [blame]31/* SDRAM */
Mateusz Kulikowski1dcdd862013-12-02 23:30:58 +0100[diff] [blame]32#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1
33#define CONFIG_SYS_SDRAM_SIZE 0x04000000
34
35#define CONFIG_SYS_INIT_SP_ADDR \
Wenyou.Yang@microchip.comfdc77182017-07-21 17:07:46 +0800[diff] [blame]36 (ATMEL_BASE_SRAM1 + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
Mateusz Kulikowski1dcdd862013-12-02 23:30:58 +0100[diff] [blame]37
Mateusz Kulikowski1dcdd862013-12-02 23:30:58 +0100[diff] [blame]38/* NAND flash */
39#ifdef CONFIG_CMD_NAND
Mateusz Kulikowski1dcdd862013-12-02 23:30:58 +0100[diff] [blame]40#define CONFIG_SYS_MAX_NAND_DEVICE 1
41#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
42/* our ALE is AD21 */
43#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
44/* our CLE is AD22 */
45#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
46#define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PD(15)
47#define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PA(22)
48#endif
49
Mateusz Kulikowski1dcdd862013-12-02 23:30:58 +0100[diff] [blame]50/* Ethernet */
51#define CONFIG_MACB
52#define CONFIG_RMII
53#define CONFIG_NET_RETRY_COUNT 20
54#define CONFIG_AT91_WANTS_COMMON_PHY
55
56/* USB */
57#ifdef CONFIG_CMD_USB
58#define CONFIG_USB_ATMEL
59#define CONFIG_USB_OHCI_NEW
Mateusz Kulikowski1dcdd862013-12-02 23:30:58 +0100[diff] [blame]60#define CONFIG_SYS_USB_OHCI_CPU_INIT
61#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000
62#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263"
63#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
Mateusz Kulikowski1dcdd862013-12-02 23:30:58 +0100[diff] [blame]64#endif
65
Wenyou.Yang@microchip.comfdc77182017-07-21 17:07:46 +0800[diff] [blame]66/* bootstrap + u-boot + env + linux in dataflash on CS0 */
Mateusz Kulikowski1dcdd862013-12-02 23:30:58 +0100[diff] [blame]67#define CONFIG_BOOTCOMMAND "nboot 21000000 0"
Mateusz Kulikowski1dcdd862013-12-02 23:30:58 +0100[diff] [blame]68#define CONFIG_EXTRA_ENV_SETTINGS \
Tom Rini43ede0b2017-10-22 17:55:07 -0400[diff] [blame]69 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
Mateusz Kulikowski1dcdd862013-12-02 23:30:58 +0100[diff] [blame]70
Mateusz Kulikowski1dcdd862013-12-02 23:30:58 +0100[diff] [blame]71#endif