blob: 8be532c3e318bcf2d6ea61dbef75aa8bad07be4a [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001// SPDX-License-Identifier: GPL-2.0+
Stefan Roese88aff622008-02-19 16:21:49 +01002/*
Lukasz Majewskic8c02422018-11-22 14:54:34 +01003 * (C) Copyright 2018
4 * Lukasz Majewski, DENX Software Engineering, lukma@denx.de.
5 *
Stefan Roese88aff622008-02-19 16:21:49 +01006 * (C) Copyright 2008
7 * Stefan Roese, DENX Software Engineering, sr@denx.de.
8 *
9 * based on a the Linux rtc-m41t80.c driver which is:
10 * Alexander Bigga <ab@mycable.de>, 2006 (c) mycable GmbH
Stefan Roese88aff622008-02-19 16:21:49 +010011 */
12
13/*
14 * Date & Time support for STMicroelectronics M41T62
15 */
16
17/* #define DEBUG */
18
19#include <common.h>
20#include <command.h>
Lukasz Majewskic8c02422018-11-22 14:54:34 +010021#include <dm.h>
Simon Glassf7ae49f2020-05-10 11:40:05 -060022#include <log.h>
Stefan Roese88aff622008-02-19 16:21:49 +010023#include <rtc.h>
24#include <i2c.h>
Sebastian Reichel86911982020-09-02 19:31:39 +020025#include <linux/log2.h>
Sebastian Reichel9bbe2102020-09-02 19:31:40 +020026#include <linux/delay.h>
Stefan Roese88aff622008-02-19 16:21:49 +010027
Stefan Roese88aff622008-02-19 16:21:49 +010028#define M41T62_REG_SSEC 0
29#define M41T62_REG_SEC 1
30#define M41T62_REG_MIN 2
31#define M41T62_REG_HOUR 3
32#define M41T62_REG_WDAY 4
33#define M41T62_REG_DAY 5
34#define M41T62_REG_MON 6
35#define M41T62_REG_YEAR 7
36#define M41T62_REG_ALARM_MON 0xa
37#define M41T62_REG_ALARM_DAY 0xb
38#define M41T62_REG_ALARM_HOUR 0xc
39#define M41T62_REG_ALARM_MIN 0xd
40#define M41T62_REG_ALARM_SEC 0xe
41#define M41T62_REG_FLAGS 0xf
42
43#define M41T62_DATETIME_REG_SIZE (M41T62_REG_YEAR + 1)
44#define M41T62_ALARM_REG_SIZE \
45 (M41T62_REG_ALARM_SEC + 1 - M41T62_REG_ALARM_MON)
46
47#define M41T62_SEC_ST (1 << 7) /* ST: Stop Bit */
48#define M41T62_ALMON_AFE (1 << 7) /* AFE: AF Enable Bit */
49#define M41T62_ALMON_SQWE (1 << 6) /* SQWE: SQW Enable Bit */
50#define M41T62_ALHOUR_HT (1 << 6) /* HT: Halt Update Bit */
51#define M41T62_FLAGS_AF (1 << 6) /* AF: Alarm Flag Bit */
Sebastian Reichel9bbe2102020-09-02 19:31:40 +020052#define M41T62_FLAGS_OF (1 << 2) /* OF: Oscillator Flag Bit */
Stefan Roese88aff622008-02-19 16:21:49 +010053#define M41T62_FLAGS_BATT_LOW (1 << 4) /* BL: Battery Low Bit */
54
Sebastian Reichel86911982020-09-02 19:31:39 +020055#define M41T62_WDAY_SQW_FREQ_MASK 0xf0
56#define M41T62_WDAY_SQW_FREQ_SHIFT 4
57
58#define M41T62_SQW_MAX_FREQ 32768
59
Stefan Roese88aff622008-02-19 16:21:49 +010060#define M41T62_FEATURE_HT (1 << 0)
61#define M41T62_FEATURE_BL (1 << 1)
62
Stefan Roese038f3c52012-01-20 11:47:47 +010063#define M41T80_ALHOUR_HT (1 << 6) /* HT: Halt Update Bit */
64
Lukasz Majewski7afc4152018-11-22 14:54:33 +010065static void m41t62_update_rtc_time(struct rtc_time *tm, u8 *buf)
Stefan Roese88aff622008-02-19 16:21:49 +010066{
Stefan Roese88aff622008-02-19 16:21:49 +010067 debug("%s: raw read data - sec=%02x, min=%02x, hr=%02x, "
68 "mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n",
69 __FUNCTION__,
70 buf[0], buf[1], buf[2], buf[3],
71 buf[4], buf[5], buf[6], buf[7]);
72
Albin Tonnerree84aba12009-08-13 15:31:11 +020073 tm->tm_sec = bcd2bin(buf[M41T62_REG_SEC] & 0x7f);
74 tm->tm_min = bcd2bin(buf[M41T62_REG_MIN] & 0x7f);
75 tm->tm_hour = bcd2bin(buf[M41T62_REG_HOUR] & 0x3f);
76 tm->tm_mday = bcd2bin(buf[M41T62_REG_DAY] & 0x3f);
Stefan Roese88aff622008-02-19 16:21:49 +010077 tm->tm_wday = buf[M41T62_REG_WDAY] & 0x07;
Albin Tonnerree84aba12009-08-13 15:31:11 +020078 tm->tm_mon = bcd2bin(buf[M41T62_REG_MON] & 0x1f);
Stefan Roese88aff622008-02-19 16:21:49 +010079
80 /* assume 20YY not 19YY, and ignore the Century Bit */
81 /* U-Boot needs to add 1900 here */
Albin Tonnerree84aba12009-08-13 15:31:11 +020082 tm->tm_year = bcd2bin(buf[M41T62_REG_YEAR]) + 100 + 1900;
Stefan Roese88aff622008-02-19 16:21:49 +010083
84 debug("%s: tm is secs=%d, mins=%d, hours=%d, "
85 "mday=%d, mon=%d, year=%d, wday=%d\n",
86 __FUNCTION__,
87 tm->tm_sec, tm->tm_min, tm->tm_hour,
88 tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
Stefan Roese88aff622008-02-19 16:21:49 +010089}
90
Lukasz Majewski7afc4152018-11-22 14:54:33 +010091static void m41t62_set_rtc_buf(const struct rtc_time *tm, u8 *buf)
Stefan Roese88aff622008-02-19 16:21:49 +010092{
Stefan Roese88aff622008-02-19 16:21:49 +010093 debug("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
94 tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday,
95 tm->tm_hour, tm->tm_min, tm->tm_sec);
96
Stefan Roese88aff622008-02-19 16:21:49 +010097 /* Merge time-data and register flags into buf[0..7] */
98 buf[M41T62_REG_SSEC] = 0;
99 buf[M41T62_REG_SEC] =
Albin Tonnerree84aba12009-08-13 15:31:11 +0200100 bin2bcd(tm->tm_sec) | (buf[M41T62_REG_SEC] & ~0x7f);
Stefan Roese88aff622008-02-19 16:21:49 +0100101 buf[M41T62_REG_MIN] =
Albin Tonnerree84aba12009-08-13 15:31:11 +0200102 bin2bcd(tm->tm_min) | (buf[M41T62_REG_MIN] & ~0x7f);
Stefan Roese88aff622008-02-19 16:21:49 +0100103 buf[M41T62_REG_HOUR] =
Albin Tonnerree84aba12009-08-13 15:31:11 +0200104 bin2bcd(tm->tm_hour) | (buf[M41T62_REG_HOUR] & ~0x3f) ;
Stefan Roese88aff622008-02-19 16:21:49 +0100105 buf[M41T62_REG_WDAY] =
106 (tm->tm_wday & 0x07) | (buf[M41T62_REG_WDAY] & ~0x07);
107 buf[M41T62_REG_DAY] =
Albin Tonnerree84aba12009-08-13 15:31:11 +0200108 bin2bcd(tm->tm_mday) | (buf[M41T62_REG_DAY] & ~0x3f);
Stefan Roese88aff622008-02-19 16:21:49 +0100109 buf[M41T62_REG_MON] =
Albin Tonnerree84aba12009-08-13 15:31:11 +0200110 bin2bcd(tm->tm_mon) | (buf[M41T62_REG_MON] & ~0x1f);
Stefan Roese88aff622008-02-19 16:21:49 +0100111 /* assume 20YY not 19YY */
Albin Tonnerree84aba12009-08-13 15:31:11 +0200112 buf[M41T62_REG_YEAR] = bin2bcd(tm->tm_year % 100);
Lukasz Majewski7afc4152018-11-22 14:54:33 +0100113}
114
Lukasz Majewskic8c02422018-11-22 14:54:34 +0100115#ifdef CONFIG_DM_RTC
116static int m41t62_rtc_get(struct udevice *dev, struct rtc_time *tm)
117{
118 u8 buf[M41T62_DATETIME_REG_SIZE];
119 int ret;
120
121 ret = dm_i2c_read(dev, 0, buf, sizeof(buf));
122 if (ret)
123 return ret;
124
125 m41t62_update_rtc_time(tm, buf);
126
127 return 0;
128}
129
130static int m41t62_rtc_set(struct udevice *dev, const struct rtc_time *tm)
131{
132 u8 buf[M41T62_DATETIME_REG_SIZE];
133 int ret;
134
135 ret = dm_i2c_read(dev, 0, buf, sizeof(buf));
136 if (ret)
137 return ret;
138
139 m41t62_set_rtc_buf(tm, buf);
140
141 ret = dm_i2c_write(dev, 0, buf, sizeof(buf));
142 if (ret) {
143 printf("I2C write failed in %s()\n", __func__);
144 return ret;
145 }
146
147 return 0;
148}
149
Sebastian Reichel86911982020-09-02 19:31:39 +0200150static int m41t62_sqw_enable(struct udevice *dev, bool enable)
Lukasz Majewskic8c02422018-11-22 14:54:34 +0100151{
152 u8 val;
Sebastian Reichel86911982020-09-02 19:31:39 +0200153 int ret;
154
155 ret = dm_i2c_read(dev, M41T62_REG_ALARM_MON, &val, sizeof(val));
156 if (ret)
157 return ret;
158
159 if (enable)
160 val |= M41T62_ALMON_SQWE;
161 else
162 val &= ~M41T62_ALMON_SQWE;
163
164 return dm_i2c_write(dev, M41T62_REG_ALARM_MON, &val, sizeof(val));
165}
166
167static int m41t62_sqw_set_rate(struct udevice *dev, unsigned int rate)
168{
169 u8 val, newval, sqwrateval;
170 int ret;
171
172 if (rate >= M41T62_SQW_MAX_FREQ)
173 sqwrateval = 1;
174 else if (rate >= M41T62_SQW_MAX_FREQ / 4)
175 sqwrateval = 2;
176 else if (rate)
177 sqwrateval = 15 - ilog2(rate);
178
179 ret = dm_i2c_read(dev, M41T62_REG_WDAY, &val, sizeof(val));
180 if (ret)
181 return ret;
182
183 newval = val;
184 newval &= ~M41T62_WDAY_SQW_FREQ_MASK;
185 newval |= (sqwrateval << M41T62_WDAY_SQW_FREQ_SHIFT);
186
187 /*
188 * Try to avoid writing unchanged values. Writing to this register
189 * will reset the internal counter pipeline and thus affect system
190 * time.
191 */
192 if (newval == val)
193 return 0;
194
195 return dm_i2c_write(dev, M41T62_REG_WDAY, &newval, sizeof(newval));
196}
197
Sebastian Reichel9bbe2102020-09-02 19:31:40 +0200198static int m41t62_rtc_restart_osc(struct udevice *dev)
199{
200 u8 val;
201 int ret;
202
203 /* 0. check if oscillator failure happened */
204 ret = dm_i2c_read(dev, M41T62_REG_FLAGS, &val, sizeof(val));
205 if (ret)
206 return ret;
207 if (!(val & M41T62_FLAGS_OF))
208 return 0;
209
210 ret = dm_i2c_read(dev, M41T62_REG_SEC, &val, sizeof(val));
211 if (ret)
212 return ret;
213
214 /* 1. Set stop bit */
215 val |= M41T62_SEC_ST;
Max Yang92cf4582021-05-10 05:23:37 +0000216 ret = dm_i2c_write(dev, M41T62_REG_SEC, &val, sizeof(val));
Sebastian Reichel9bbe2102020-09-02 19:31:40 +0200217 if (ret)
218 return ret;
219
220 /* 2. Clear stop bit */
221 val &= ~M41T62_SEC_ST;
Max Yang92cf4582021-05-10 05:23:37 +0000222 ret = dm_i2c_write(dev, M41T62_REG_SEC, &val, sizeof(val));
Sebastian Reichel9bbe2102020-09-02 19:31:40 +0200223 if (ret)
224 return ret;
225
226 /* 3. wait 4 seconds */
227 mdelay(4000);
228
229 ret = dm_i2c_read(dev, M41T62_REG_FLAGS, &val, sizeof(val));
230 if (ret)
231 return ret;
232
233 /* 4. clear M41T62_FLAGS_OF bit */
234 val &= ~M41T62_FLAGS_OF;
235 ret = dm_i2c_write(dev, M41T62_REG_FLAGS, &val, sizeof(val));
236 if (ret)
237 return ret;
238
239 return 0;
240}
241
Sebastian Reichel86911982020-09-02 19:31:39 +0200242static int m41t62_rtc_clear_ht(struct udevice *dev)
243{
244 u8 val;
245 int ret;
Lukasz Majewskic8c02422018-11-22 14:54:34 +0100246
247 /*
248 * M41T82: Make sure HT (Halt Update) bit is cleared.
249 * This bit is 0 in M41T62 so its save to clear it always.
250 */
251
Sebastian Reichel86911982020-09-02 19:31:39 +0200252 ret = dm_i2c_read(dev, M41T62_REG_ALARM_HOUR, &val, sizeof(val));
253 if (ret)
254 return ret;
Lukasz Majewskic8c02422018-11-22 14:54:34 +0100255 val &= ~M41T80_ALHOUR_HT;
Sebastian Reichel86911982020-09-02 19:31:39 +0200256 ret = dm_i2c_write(dev, M41T62_REG_ALARM_HOUR, &val, sizeof(val));
257 if (ret)
258 return ret;
Lukasz Majewskic8c02422018-11-22 14:54:34 +0100259
Sebastian Reichel86911982020-09-02 19:31:39 +0200260 return 0;
261}
262
263static int m41t62_rtc_reset(struct udevice *dev)
264{
265 int ret;
266
Sebastian Reichel9bbe2102020-09-02 19:31:40 +0200267 ret = m41t62_rtc_restart_osc(dev);
268 if (ret)
269 return ret;
270
Sebastian Reichel86911982020-09-02 19:31:39 +0200271 ret = m41t62_rtc_clear_ht(dev);
272 if (ret)
273 return ret;
274
275 /*
276 * Some boards feed the square wave as clock input into
277 * the SoC. This enables a 32.768kHz square wave, which is
278 * also the hardware default after power-loss.
279 */
280 ret = m41t62_sqw_set_rate(dev, 32768);
281 if (ret)
282 return ret;
283 return m41t62_sqw_enable(dev, true);
Lukasz Majewskic8c02422018-11-22 14:54:34 +0100284}
285
Simon Goldschmidt4e829e92019-03-28 21:11:49 +0100286/*
287 * Make sure HT bit is cleared. This bit is set on entering battery backup
288 * mode, so do this before the first read access.
289 */
290static int m41t62_rtc_probe(struct udevice *dev)
291{
Sebastian Reichel86911982020-09-02 19:31:39 +0200292 return m41t62_rtc_clear_ht(dev);
Simon Goldschmidt4e829e92019-03-28 21:11:49 +0100293}
294
Lukasz Majewskic8c02422018-11-22 14:54:34 +0100295static const struct rtc_ops m41t62_rtc_ops = {
296 .get = m41t62_rtc_get,
297 .set = m41t62_rtc_set,
298 .reset = m41t62_rtc_reset,
299};
300
301static const struct udevice_id m41t62_rtc_ids[] = {
302 { .compatible = "st,m41t62" },
Simon Goldschmidt4e829e92019-03-28 21:11:49 +0100303 { .compatible = "st,m41t82" },
Marek Vasutb371acc2020-02-15 14:46:10 +0100304 { .compatible = "st,m41st87" },
Lukasz Majewskic8c02422018-11-22 14:54:34 +0100305 { .compatible = "microcrystal,rv4162" },
306 { }
307};
308
309U_BOOT_DRIVER(rtc_m41t62) = {
310 .name = "rtc-m41t62",
311 .id = UCLASS_RTC,
312 .of_match = m41t62_rtc_ids,
313 .ops = &m41t62_rtc_ops,
Simon Goldschmidt4e829e92019-03-28 21:11:49 +0100314 .probe = &m41t62_rtc_probe,
Lukasz Majewskic8c02422018-11-22 14:54:34 +0100315};
316
317#else /* NON DM RTC code - will be removed */
Lukasz Majewski7afc4152018-11-22 14:54:33 +0100318int rtc_get(struct rtc_time *tm)
319{
320 u8 buf[M41T62_DATETIME_REG_SIZE];
321
322 i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, buf, M41T62_DATETIME_REG_SIZE);
323 m41t62_update_rtc_time(tm, buf);
324
325 return 0;
326}
327
328int rtc_set(struct rtc_time *tm)
329{
330 u8 buf[M41T62_DATETIME_REG_SIZE];
331
332 i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, buf, M41T62_DATETIME_REG_SIZE);
333 m41t62_set_rtc_buf(tm, buf);
Stefan Roese88aff622008-02-19 16:21:49 +0100334
Lukasz Majewski4d3df952018-11-22 14:54:32 +0100335 if (i2c_write(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, buf,
336 M41T62_DATETIME_REG_SIZE)) {
Stefan Roese88aff622008-02-19 16:21:49 +0100337 printf("I2C write failed in %s()\n", __func__);
Jean-Christophe PLAGNIOL-VILLARDd1e23192008-09-01 23:06:23 +0200338 return -1;
339 }
340
341 return 0;
Stefan Roese88aff622008-02-19 16:21:49 +0100342}
343
344void rtc_reset(void)
345{
Stefan Roese038f3c52012-01-20 11:47:47 +0100346 u8 val;
347
Stefan Roese88aff622008-02-19 16:21:49 +0100348 /*
Stefan Roese038f3c52012-01-20 11:47:47 +0100349 * M41T82: Make sure HT (Halt Update) bit is cleared.
350 * This bit is 0 in M41T62 so its save to clear it always.
Stefan Roese88aff622008-02-19 16:21:49 +0100351 */
Stefan Roese038f3c52012-01-20 11:47:47 +0100352 i2c_read(CONFIG_SYS_I2C_RTC_ADDR, M41T62_REG_ALARM_HOUR, 1, &val, 1);
353 val &= ~M41T80_ALHOUR_HT;
354 i2c_write(CONFIG_SYS_I2C_RTC_ADDR, M41T62_REG_ALARM_HOUR, 1, &val, 1);
Stefan Roese88aff622008-02-19 16:21:49 +0100355}
Lukasz Majewskic8c02422018-11-22 14:54:34 +0100356#endif /* CONFIG_DM_RTC */