blob: 63b9399e142dd4437664b3f93bd5f2bfc290373f [file] [log] [blame]
Mike Frysinger8b219cf2008-10-12 21:54:07 -04001/*
2 * U-boot - Configuration file for cm-bf548 board
3 */
4
5#ifndef __CONFIG_CM_BF548_H__
6#define __CONFIG_CM_BF548_H__
7
Mike Frysingerf348ab82009-04-24 17:22:40 -04008#include <asm/config-pre.h>
Mike Frysinger8b219cf2008-10-12 21:54:07 -04009
10
11/*
12 * Processor Settings
13 */
14#define CONFIG_BFIN_CPU bf548-0.0
15#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA
16
17
18/*
19 * Clock Settings
20 * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
21 * SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
22 */
23/* CONFIG_CLKIN_HZ is any value in Hz */
24#define CONFIG_CLKIN_HZ 25000000
25/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */
26/* 1 = CLKIN / 2 */
27#define CONFIG_CLKIN_HALF 0
28/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */
29/* 1 = bypass PLL */
30#define CONFIG_PLL_BYPASS 0
31/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */
32/* Values can range from 0-63 (where 0 means 64) */
33#define CONFIG_VCO_MULT 21
34/* CCLK_DIV controls the core clock divider */
35/* Values can be 1, 2, 4, or 8 ONLY */
36#define CONFIG_CCLK_DIV 1
37/* SCLK_DIV controls the system clock divider */
38/* Values can range from 1-15 */
39#define CONFIG_SCLK_DIV 4
40
Harald Krapfenbauerfd04a052009-10-14 08:37:32 -040041/* Decrease core voltage */
42#define CONFIG_VR_CTL_VAL (VLEV_115 | GAIN_20 | FREQ_1000)
43
Mike Frysinger8b219cf2008-10-12 21:54:07 -040044
45/*
46 * Memory Settings
47 */
48#define CONFIG_MEM_ADD_WDTH 10
49#define CONFIG_MEM_SIZE 64
50
51#define CONFIG_EBIU_DDRCTL0_VAL 0x218A83FE
52#define CONFIG_EBIU_DDRCTL1_VAL 0x20022222
53#define CONFIG_EBIU_DDRCTL2_VAL 0x00000021
54
55/* Default bank mapping:
56 * Async Bank 0 - 32MB Burst Flash
57 * Async Bank 1 - Ethernet
58 * Async Bank 2 - Nothing
59 * Async Bank 3 - Nothing
60 */
61#define CONFIG_EBIU_AMGCTL_VAL 0xFF
62#define CONFIG_EBIU_AMBCTL0_VAL 0x7BB07BB0
63#define CONFIG_EBIU_AMBCTL1_VAL 0xFFC27BB0
64#define CONFIG_EBIU_FCTL_VAL (BCLK_4)
65#define CONFIG_EBIU_MODE_VAL (B0MODE_FLASH)
66
67#define CONFIG_SYS_MONITOR_LEN (384 * 1024)
68#define CONFIG_SYS_MALLOC_LEN (640 * 1024)
69
70
71/*
72 * Network Settings
73 */
74#define ADI_CMDS_NETWORK 1
Ben Warren736fead2009-07-20 22:01:11 -070075#define CONFIG_NET_MULTI
76#define CONFIG_SMC911X 1
77#define CONFIG_SMC911X_BASE 0x24000000
78#define CONFIG_SMC911X_16_BIT
Mike Frysinger8b219cf2008-10-12 21:54:07 -040079#define CONFIG_HOSTNAME cm-bf548
80/* Uncomment next line to use fixed MAC address */
81/* #define CONFIG_ETHADDR 02:80:ad:24:31:91 */
82
83
84/*
85 * Flash Settings
86 */
87#define CONFIG_FLASH_CFI_DRIVER
88#define CONFIG_SYS_FLASH_BASE 0x20000000
89#define CONFIG_SYS_FLASH_CFI
90#define CONFIG_SYS_FLASH_PROTECTION
91#define CONFIG_SYS_MAX_FLASH_BANKS 1
92#define CONFIG_SYS_MAX_FLASH_SECT 259
93
94
95/*
96 * Env Storage Settings
97 */
98#define CONFIG_ENV_IS_IN_FLASH 1
99#define CONFIG_ENV_ADDR 0x20008000
100#define CONFIG_ENV_OFFSET 0x8000
101#define CONFIG_ENV_SIZE 0x8000
Mike Frysinger76d82182009-07-21 22:17:36 -0400102#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
Mike Frysinger8b219cf2008-10-12 21:54:07 -0400103
104
105/*
106 * I2C Settings
107 */
108#define CONFIG_BFIN_TWI_I2C 1
109#define CONFIG_HARD_I2C 1
Mike Frysinger8b219cf2008-10-12 21:54:07 -0400110
111
112/*
113 * Misc Settings
114 */
115#define CONFIG_BAUDRATE 115200
116#define CONFIG_BOARD_EARLY_INIT_F
117#define CONFIG_RTC_BFIN
118#define CONFIG_UART_CONSOLE 1
Harald Krapfenbauerfd04a052009-10-14 08:37:32 -0400119#define CONFIG_BOOTCOMMAND "run flashboot"
120#define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0x20040000\0"
Mike Frysinger8b219cf2008-10-12 21:54:07 -0400121
122#ifndef __ADSPBF542__
123/* Don't waste time transferring a logo over the UART */
124# if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_UART)
125# define CONFIG_VIDEO
126# endif
127# define CONFIG_DEB_DMA_URGENT
128#endif
129
130/* Define if want to do post memory test */
131#undef CONFIG_POST
132#ifdef CONFIG_POST
133#define FLASH_START_POST_BLOCK 11 /* Should > = 11 */
134#define FLASH_END_POST_BLOCK 71 /* Should < = 71 */
135#endif
136
137
138/*
139 * Pull in common ADI header for remaining command/environment setup
140 */
141#include <configs/bfin_adi_common.h>
142
Mike Frysinger8b219cf2008-10-12 21:54:07 -0400143#endif