Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / a3d65651d9dd1b65722c21bf739d1e9978320a47 / . / drivers / usb / host / Kconfig
blob: 30c6b69be89a48ca6d0857f8aa84f7ccdd27e7b1 [file] [log] [blame]
Masahiro Yamada6e7e9292014-11-07 18:48:31 +0900[diff] [blame]1#
2# USB Host Controller Drivers
3#
4comment "USB Host Controller Drivers"
5
Masahiro Yamada2b58e1b2016-08-01 00:16:34 +0900[diff] [blame]6config USB_HOST
7 bool
8
Masahiro Yamada6e7e9292014-11-07 18:48:31 +0900[diff] [blame]9config USB_XHCI_HCD
10 bool "xHCI HCD (USB 3.0) support"
Masahiro Yamada2b58e1b2016-08-01 00:16:34 +0900[diff] [blame]11 select USB_HOST
Masahiro Yamada6e7e9292014-11-07 18:48:31 +0900[diff] [blame]12 ---help---
13 The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
14 "SuperSpeed" host controller hardware.
15
Masahiro Yamada6e7e9292014-11-07 18:48:31 +0900[diff] [blame]16if USB_XHCI_HCD
17
Masahiro Yamada10db7502016-06-04 07:35:04 +0900[diff] [blame]18config USB_XHCI_DWC3
19 bool "DesignWare USB3 DRD Core Support"
20 help
21 Say Y or if your system has a Dual Role SuperSpeed
22 USB controller based on the DesignWare USB3 IP Core.
23
Neil Armstrongca7fdc82018-04-11 17:08:00 +0200[diff] [blame]24config USB_XHCI_DWC3_OF_SIMPLE
25 bool "DesignWare USB3 DRD Generic OF Simple Glue Layer"
Jean-Jacques Hiblot103774b2018-04-12 10:41:10 +0200[diff] [blame]26 depends on DM_USB
Mark Kettenisaaa8d6b2019-06-30 18:01:54 +0200[diff] [blame]27 default y if ARCH_ROCKCHIP
Jean-Jacques Hiblotcc73ba92018-04-12 10:41:11 +0200[diff] [blame]28 default y if DRA7XX
Neil Armstrongca7fdc82018-04-11 17:08:00 +0200[diff] [blame]29 help
30 Support USB2/3 functionality in simple SoC integrations with
31 USB controller based on the DesignWare USB3 IP Core.
32
Stefan Roese81c1f6f2016-07-14 11:39:20 +0200[diff] [blame]33config USB_XHCI_MVEBU
34 bool "MVEBU USB 3.0 support"
35 default y
36 depends on ARCH_MVEBU
Konstantin Porotchkin81192b72017-02-12 11:10:30 +0200[diff] [blame]37 select DM_REGULATOR
Stefan Roese81c1f6f2016-07-14 11:39:20 +0200[diff] [blame]38 help
39 Choose this option to add support for USB 3.0 driver on mvebu
40 SoCs, which includes Armada8K, Armada3700 and other Armada
41 family SoCs.
42
Bin Mengd7cde282017-07-19 21:50:08 +0800[diff] [blame]43config USB_XHCI_PCI
44 bool "Support for PCI-based xHCI USB controller"
Bin Meng978f6a32017-07-19 21:51:07 +0800[diff] [blame]45 depends on DM_USB
Bin Mengd7cde282017-07-19 21:50:08 +0800[diff] [blame]46 default y if X86
47 help
48 Enables support for the PCI-based xHCI controller.
49
Kever Yangf7bb27a2016-09-21 11:35:42 +0800[diff] [blame]50config USB_XHCI_ROCKCHIP
51 bool "Support for Rockchip on-chip xHCI USB controller"
52 depends on ARCH_ROCKCHIP
Meng Dongyange85f00a2017-06-28 19:22:39 +0800[diff] [blame]53 depends on DM_REGULATOR
54 depends on DM_USB
Kever Yangf7bb27a2016-09-21 11:35:42 +0800[diff] [blame]55 default y
56 help
57 Enables support for the on-chip xHCI controller on Rockchip SoCs.
58
Marek Vasute1cc60c2017-10-15 15:01:29 +0200[diff] [blame]59config USB_XHCI_RCAR
60 bool "Renesas RCar USB 3.0 support"
61 default y
62 depends on ARCH_RMOBILE
63 help
64 Choose this option to add support for USB 3.0 driver on Renesas
65 RCar Gen3 SoCs.
66
Patrice Chotard40d1a312017-09-05 11:04:24 +0200[diff] [blame]67config USB_XHCI_STI
68 bool "Support for STMicroelectronics STiH407 family on-chip xHCI USB controller"
69 depends on ARCH_STI
70 default y
71 help
72 Enables support for the on-chip xHCI controller on STMicroelectronics
73 STiH407 family SoCs. This is a driver for the dwc3 to provide the glue logic
74 to configure the controller.
75
Michal Simek63d74742016-12-21 14:18:31 +0100[diff] [blame]76config USB_XHCI_ZYNQMP
77 bool "Support for Xilinx ZynqMP on-chip xHCI USB controller"
78 depends on ARCH_ZYNQMP
Michal Simekd0676242018-05-18 13:15:09 +0200[diff] [blame]79 depends on DM_USB
Michal Simek63d74742016-12-21 14:18:31 +0100[diff] [blame]80 help
81 Enables support for the on-chip xHCI controller on Xilinx ZynqMP SoCs.
82
Uri Mashiachef3f3b82017-02-23 15:39:36 +0200[diff] [blame]83config USB_XHCI_DRA7XX_INDEX
84 int "DRA7XX xHCI USB index"
85 range 0 1
86 default 0
87 depends on DRA7XX
88 help
89 Select the DRA7XX xHCI USB index.
90 Current supported values: 0, 1.
91
Ran Wang420b0eb2017-10-23 10:09:22 +0800[diff] [blame]92config USB_XHCI_FSL
93 bool "Support for NXP Layerscape on-chip xHCI USB controller"
94 default y if ARCH_LS1021A || FSL_LSCH3 || FSL_LSCH2
95 depends on !SPL_NO_USB
96 help
97 Enables support for the on-chip xHCI controller on NXP Layerscape SoCs.
Masahiro Yamada93cb8242016-08-01 00:16:32 +0900[diff] [blame]98endif # USB_XHCI_HCD
Alexey Brodkinfee331f2015-12-14 17:18:50 +0300[diff] [blame]99
Masahiro Yamada6e7e9292014-11-07 18:48:31 +0900[diff] [blame]100config USB_EHCI_HCD
101 bool "EHCI HCD (USB 2.0) support"
Tom Rini64d6ac52017-05-12 22:33:28 -0400[diff] [blame]102 default y if ARCH_MX5 || ARCH_MX6
Masahiro Yamada2b58e1b2016-08-01 00:16:34 +0900[diff] [blame]103 select USB_HOST
Masahiro Yamada6e7e9292014-11-07 18:48:31 +0900[diff] [blame]104 ---help---
105 The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
106 "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
107 If your USB host controller supports USB 2.0, you will likely want to
108 configure this Host Controller Driver.
109
110 EHCI controllers are packaged with "companion" host controllers (OHCI
111 or UHCI) to handle USB 1.1 devices connected to root hub ports. Ports
112 will connect to EHCI if the device is high speed, otherwise they
113 connect to a companion controller. If you configure EHCI, you should
114 probably configure the OHCI (for NEC and some other vendors) USB Host
115 Controller Driver or UHCI (for Via motherboards) Host Controller
116 Driver too.
117
118 You may want to read <file:Documentation/usb/ehci.txt>.
119
Masahiro Yamada6e7e9292014-11-07 18:48:31 +0900[diff] [blame]120if USB_EHCI_HCD
121
Wenyou Yang17b68b52016-08-05 08:57:35 +0800[diff] [blame]122config USB_EHCI_ATMEL
123 bool "Support for Atmel on-chip EHCI USB controller"
124 depends on ARCH_AT91
125 default y
126 ---help---
127 Enables support for the on-chip EHCI controller on Atmel chips.
128
Stefan Roesecd482252015-09-01 11:39:44 +0200[diff] [blame]129config USB_EHCI_MARVELL
Tom Rini80f1f322017-05-12 22:33:29 -0400[diff] [blame]130 bool "Support for Marvell on-chip EHCI USB controller"
131 depends on ARCH_MVEBU || KIRKWOOD || ORION5X
Stefan Roesecd482252015-09-01 11:39:44 +0200[diff] [blame]132 default y
133 ---help---
134 Enables support for the on-chip EHCI controller on MVEBU SoCs.
135
Lukasz Majewski400b9722019-04-04 12:26:55 +0200[diff] [blame]136config USB_EHCI_MX5
137 bool "Support for i.MX5 on-chip EHCI USB controller"
138 depends on ARCH_MX5
139 default n
140 help
141 Enables support for the on-chip EHCI controller on i.MX5 SoCs.
142
Nikita Kiryanov919e8022015-07-23 17:19:35 +0300[diff] [blame]143config USB_EHCI_MX6
144 bool "Support for i.MX6 on-chip EHCI USB controller"
145 depends on ARCH_MX6
146 default y
147 ---help---
148 Enables support for the on-chip EHCI controller on i.MX6 SoCs.
149
Stefan Agner2deebe22016-07-13 00:25:36 -0700[diff] [blame]150config USB_EHCI_MX7
151 bool "Support for i.MX7 on-chip EHCI USB controller"
152 depends on ARCH_MX7
153 default y
154 ---help---
155 Enables support for the on-chip EHCI controller on i.MX7 SoCs.
156
Tom Rini1d1ab612017-05-12 22:33:30 -0400[diff] [blame]157config USB_EHCI_OMAP
158 bool "Support for OMAP3+ on-chip EHCI USB controller"
159 depends on ARCH_OMAP2PLUS
160 default y
161 ---help---
162 Enables support for the on-chip EHCI controller on OMAP3 and later
163 SoCs.
164
Marcel Ziswiler20df4b52019-03-25 17:24:54 +0100[diff] [blame]165config USB_EHCI_VF
166 bool "Support for Vybrid on-chip EHCI USB controller"
167 depends on ARCH_VF610
168 default y
169 help
170 Enables support for the on-chip EHCI controller on Vybrid SoCs.
171
Stefan Agnerc4483092016-07-13 00:25:38 -0700[diff] [blame]172if USB_EHCI_MX7
173
174config MXC_USB_OTG_HACTIVE
175 bool "USB Power pin high active"
176 ---help---
177 Set the USB Power pin polarity to be high active (PWR_POL)
178
179endif
180
Mateusz Kulikowski5a822112016-03-31 23:12:26 +0200[diff] [blame]181config USB_EHCI_MSM
182 bool "Support for Qualcomm on-chip EHCI USB controller"
183 depends on DM_USB
184 select USB_ULPI_VIEWPORT
Ramon Fried0ac0b6e2018-09-21 13:35:50 +0300[diff] [blame]185 select MSM8916_USB_PHY
Mateusz Kulikowski5a822112016-03-31 23:12:26 +0200[diff] [blame]186 default n
187 ---help---
188 Enables support for the on-chip EHCI controller on Qualcomm
189 Snapdragon SoCs.
Mateusz Kulikowski5a822112016-03-31 23:12:26 +0200[diff] [blame]190
Bin Menga11a5b82017-08-09 00:21:54 -0700[diff] [blame]191config USB_EHCI_PCI
192 bool "Support for PCI-based EHCI USB controller"
193 default y if X86
194 help
195 Enables support for the PCI-based EHCI controller.
196
Peter Robinson747fed52019-02-20 12:17:27 +0000[diff] [blame]197config USB_EHCI_TEGRA
198 bool "Support for NVIDIA Tegra on-chip EHCI USB controller"
199 depends on TEGRA
200 ---help---
201 Enable support for Tegra on-chip EHCI USB controller
202
Siva Durga Prasad Paladugu2cdc7782016-07-22 14:51:51 +0530[diff] [blame]203config USB_EHCI_ZYNQ
204 bool "Support for Xilinx Zynq on-chip EHCI USB controller"
205 depends on ARCH_ZYNQ
206 default y
207 ---help---
208 Enable support for Zynq on-chip EHCI USB controller
209
Alexey Brodkin90fbb282015-12-02 12:32:02 +0300[diff] [blame]210config USB_EHCI_GENERIC
211 bool "Support for generic EHCI USB controller"
212 depends on OF_CONTROL
213 depends on DM_USB
Jagan Teki29d280c2018-12-22 18:18:10 +0530[diff] [blame]214 default ARCH_SUNXI
Alexey Brodkin90fbb282015-12-02 12:32:02 +0300[diff] [blame]215 default n
216 ---help---
217 Enables support for generic EHCI controller.
218
Ran Wang91f4fb92017-12-20 10:34:20 +0800[diff] [blame]219config USB_EHCI_FSL
220 bool "Support for FSL on-chip EHCI USB controller"
221 default n
222 select CONFIG_EHCI_HCD_INIT_AFTER_RESET
223 ---help---
224 Enables support for the on-chip EHCI controller on FSL chips.
Masahiro Yamada93cb8242016-08-01 00:16:32 +0900[diff] [blame]225endif # USB_EHCI_HCD
226
227config USB_OHCI_HCD
228 bool "OHCI HCD (USB 1.1) support"
229 ---help---
230 The Open Host Controller Interface (OHCI) is a standard for accessing
231 USB 1.1 host controller hardware. It does more in hardware than Intel's
232 UHCI specification. If your USB host controller follows the OHCI spec,
233 say Y. On most non-x86 systems, and on x86 hardware that's not using a
234 USB controller from Intel or VIA, this is appropriate. If your host
235 controller doesn't use PCI, this is probably appropriate. For a PCI
236 based system where you're not sure, the "lspci -v" entry will list the
237 right "prog-if" for your USB controller(s): EHCI, OHCI, or UHCI.
238
Heiko Schocher991e6602019-07-16 10:49:07 +0200[diff] [blame]239config USB_OHCI_PCI
240 bool "Support for PCI-based OHCI USB controller"
241 depends on DM_USB
242 default n
243 help
244 Enables support for the PCI-based OHCI controller.
245
Masahiro Yamada93cb8242016-08-01 00:16:32 +0900[diff] [blame]246if USB_OHCI_HCD
247
248config USB_OHCI_GENERIC
249 bool "Support for generic OHCI USB controller"
250 depends on OF_CONTROL
251 depends on DM_USB
Jagan Teki29d280c2018-12-22 18:18:10 +0530[diff] [blame]252 default ARCH_SUNXI
Masahiro Yamada2b58e1b2016-08-01 00:16:34 +0900[diff] [blame]253 select USB_HOST
Masahiro Yamada93cb8242016-08-01 00:16:32 +0900[diff] [blame]254 ---help---
255 Enables support for generic OHCI controller.
256
Adam Ford9da54742019-04-30 05:21:41 -0500[diff] [blame]257config USB_OHCI_DA8XX
258 bool "Support for da850 OHCI USB controller"
259 help
260 Enable support for the da850 USB controller.
261
Masahiro Yamada93cb8242016-08-01 00:16:32 +0900[diff] [blame]262endif # USB_OHCI_HCD
Masahiro Yamada96d82842016-08-01 00:16:33 +0900[diff] [blame]263
264config USB_UHCI_HCD
265 bool "UHCI HCD (most Intel and VIA) support"
Masahiro Yamada2b58e1b2016-08-01 00:16:34 +0900[diff] [blame]266 select USB_HOST
Masahiro Yamada96d82842016-08-01 00:16:33 +0900[diff] [blame]267 ---help---
268 The Universal Host Controller Interface is a standard by Intel for
269 accessing the USB hardware in the PC (which is also called the USB
270 host controller). If your USB host controller conforms to this
271 standard, you may want to say Y, but see below. All recent boards
272 with Intel PCI chipsets (like intel 430TX, 440FX, 440LX, 440BX,
273 i810, i820) conform to this standard. Also all VIA PCI chipsets
274 (like VIA VP2, VP3, MVP3, Apollo Pro, Apollo Pro II or Apollo Pro
275 133) and LEON/GRLIB SoCs with the GRUSBHC controller.
276 If unsure, say Y.
277
278if USB_UHCI_HCD
279
280endif # USB_UHCI_HCD
Philipp Tomsich4ac72f52017-07-03 18:30:06 +0200[diff] [blame]281
282config USB_DWC2
283 bool "DesignWare USB2 Core support"
284 select USB_HOST
285 ---help---
286 The DesignWare USB 2.0 controller is compliant with the
287 USB-Implementers Forum (USB-IF) USB 2.0 specifications.
288 Hi-Speed (480 Mbps), Full-Speed (12 Mbps), and Low-Speed (1.5 Mbps)
289 operation is compliant to the controller Supplement. If you want to
290 enable this controller in host mode, say Y.
Alexey Brodkin42637fd2018-02-28 16:16:58 +0300[diff] [blame]291
292if USB_DWC2
293config USB_DWC2_BUFFER_SIZE
294 int "Data buffer size in kB"
295 default 64
296 ---help---
297 By default 64 kB buffer is used but if amount of RAM avaialble on
298 the target is not enough to accommodate allocation of buffer of
299 that size it is possible to shrink it. Smaller sizes should be fine
300 because larger transactions could be split in smaller ones.
301
302endif # USB_DWC2
Marek Vasuta3d65652019-08-11 13:23:43 +0200[diff] [blame^]303
304config USB_R8A66597_HCD
305 bool "Renesas R8A66597 USB Core support"
306 depends on OF_CONTROL
307 depends on DM_USB
308 select USB_HOST
309 ---help---
310 This enables support for the on-chip Renesas R8A66597 USB 2.0
311 controller, present in various RZ and SH SoCs.