blob: 82cd864baf9362a321088bc291779acdaadcf126 [file] [log] [blame]
Simon Glass98af8792016-10-17 20:12:35 -06001menu "Console"
2
Tom Rini4880b022016-11-29 09:14:56 -05003config MENU
4 bool
5 help
6 This is the library functionality to provide a text-based menu of
7 choices for the user to make choices with.
8
Simon Glass9854a872015-11-08 23:47:48 -07009config CONSOLE_RECORD
10 bool "Console recording"
11 help
12 This provides a way to record console output (and provide console
Robert P. J. Day57247d92016-08-31 12:49:13 -040013 input) through circular buffers. This is mostly useful for testing.
Simon Glass9854a872015-11-08 23:47:48 -070014 Console output is recorded even when the console is silent.
15 To enable console recording, call console_record_reset_enable()
16 from your code.
17
Ovidiu Panait4e819202020-11-28 10:43:03 +020018config CONSOLE_RECORD_INIT_F
19 bool "Enable console recording during pre-relocation init"
20 depends on CONSOLE_RECORD && SYS_MALLOC_F
21 default y
22 help
23 This option enables console recording during pre-relocation init.
24 CONFIG_SYS_MALLOC_F must be enabled to use this feature.
25
Simon Glass9854a872015-11-08 23:47:48 -070026config CONSOLE_RECORD_OUT_SIZE
27 hex "Output buffer size"
28 depends on CONSOLE_RECORD
29 default 0x400 if CONSOLE_RECORD
30 help
31 Set the size of the console output buffer. When this fills up, no
32 more data will be recorded until some is removed. The buffer is
33 allocated immediately after the malloc() region is ready.
34
Simon Glass8ce465e2021-10-23 17:26:03 -060035config CONSOLE_RECORD_OUT_SIZE_F
36 hex "Output buffer size before relocation"
37 depends on CONSOLE_RECORD
38 default 0x400 if CONSOLE_RECORD
39 help
40 Set the size of the console output buffer before relocation. When
41 this fills up, no more data will be recorded until some is removed.
42 The buffer is allocated immediately after the early malloc() region is
43 ready.
44
Simon Glass9854a872015-11-08 23:47:48 -070045config CONSOLE_RECORD_IN_SIZE
46 hex "Input buffer size"
47 depends on CONSOLE_RECORD
48 default 0x100 if CONSOLE_RECORD
49 help
50 Set the size of the console input buffer. When this contains data,
51 tstc() and getc() will use this in preference to real device input.
52 The buffer is allocated immediately after the malloc() region is
53 ready.
Siva Durga Prasad Paladugu4d255072016-07-19 10:42:22 +053054
Christian Gmeiner83f6f602018-09-10 12:43:16 +020055config DISABLE_CONSOLE
56 bool "Add functionality to disable console completely"
57 help
58 Disable console (in & out).
59
Siva Durga Prasad Paladugua4d88922016-07-29 15:31:47 +053060config IDENT_STRING
61 string "Board specific string to be added to uboot version string"
62 help
63 This options adds the board specific name to u-boot version.
64
Masahiro Yamadab44b3022017-09-16 14:10:40 +090065config LOGLEVEL
66 int "loglevel"
Tom Rini6a3e65d2017-10-04 16:44:30 -040067 default 4
Marek Bykowski2aa69c92020-02-03 11:43:32 +010068 range 0 10
Masahiro Yamadab44b3022017-09-16 14:10:40 +090069 help
70 All Messages with a loglevel smaller than the console loglevel will
71 be compiled in. The loglevels are defined as follows:
72
Simon Glass6fc7e932019-02-16 20:24:34 -070073 0 - emergency
74 1 - alert
75 2 - critical
76 3 - error
77 4 - warning
78 5 - note
79 6 - info
80 7 - debug
81 8 - debug content
82 9 - debug hardware I/O
Masahiro Yamadab44b3022017-09-16 14:10:40 +090083
84config SPL_LOGLEVEL
85 int
86 default LOGLEVEL
87
Simon Glass4d8d3052018-11-15 18:43:49 -070088config TPL_LOGLEVEL
89 int
90 default LOGLEVEL
91
Simon Glass98af8792016-10-17 20:12:35 -060092config SILENT_CONSOLE
93 bool "Support a silent console"
94 help
95 This option allows the console to be silenced, meaning that no
96 output will appear on the console devices. This is controlled by
Chris Packhamf7597732019-01-11 15:30:50 +130097 setting the environment variable 'silent' to a non-empty value.
Simon Glass98af8792016-10-17 20:12:35 -060098 Note this also silences the console when booting Linux.
99
100 When the console is set up, the variable is checked, and the
101 GD_FLG_SILENT flag is set. Changing the environment variable later
102 will update the flag.
103
104config SILENT_U_BOOT_ONLY
105 bool "Only silence the U-Boot console"
106 depends on SILENT_CONSOLE
107 help
108 Normally when the U-Boot console is silenced, Linux's console is
109 also silenced (assuming the board boots into Linux). This option
110 allows the linux console to operate normally, even if U-Boot's
111 is silenced.
112
113config SILENT_CONSOLE_UPDATE_ON_SET
114 bool "Changes to the 'silent' environment variable update immediately"
115 depends on SILENT_CONSOLE
116 default y if SILENT_CONSOLE
117 help
118 When the 'silent' environment variable is changed, update the
119 console silence flag immediately. This allows 'setenv' to be used
120 to silence or un-silence the console.
121
122 The effect is that any change to the variable will affect the
123 GD_FLG_SILENT flag.
124
125config SILENT_CONSOLE_UPDATE_ON_RELOC
126 bool "Allow flags to take effect on relocation"
127 depends on SILENT_CONSOLE
128 help
129 In some cases the environment is not available until relocation
130 (e.g. NAND). This option makes the value of the 'silent'
131 environment variable take effect at relocation.
132
Simon Glass8f925582016-10-17 20:12:36 -0600133config PRE_CONSOLE_BUFFER
134 bool "Buffer characters before the console is available"
135 help
136 Prior to the console being initialised (i.e. serial UART
137 initialised etc) all console output is silently discarded.
138 Defining CONFIG_PRE_CONSOLE_BUFFER will cause U-Boot to
139 buffer any console messages prior to the console being
140 initialised to a buffer. The buffer is a circular buffer, so
141 if it overflows, earlier output is discarded.
142
143 Note that this is not currently supported in SPL. It would be
144 useful to be able to share the pre-console buffer with SPL.
145
146config PRE_CON_BUF_SZ
147 int "Sets the size of the pre-console buffer"
148 depends on PRE_CONSOLE_BUFFER
149 default 4096
150 help
151 The size of the pre-console buffer affects how much console output
152 can be held before it overflows and starts discarding earlier
153 output. Normally there is very little output at this early stage,
154 unless debugging is enabled, so allow enough for ~10 lines of
155 text.
156
157 This is a useful feature if you are using a video console and
158 want to see the full boot output on the console. Without this
159 option only the post-relocation output will be displayed.
160
161config PRE_CON_BUF_ADDR
162 hex "Address of the pre-console buffer"
163 depends on PRE_CONSOLE_BUFFER
164 default 0x2f000000 if ARCH_SUNXI && MACH_SUN9I
165 default 0x4f000000 if ARCH_SUNXI && !MACH_SUN9I
Jagan Teki38070172020-01-23 19:42:19 +0530166 default 0x0f000000 if ROCKCHIP_RK3288
Jagan Teki61853a72020-04-02 17:11:23 +0530167 default 0x0f200000 if ROCKCHIP_RK3399
Simon Glass8f925582016-10-17 20:12:36 -0600168 help
169 This sets the start address of the pre-console buffer. This must
170 be in available memory and is accessed before relocation and
171 possibly before DRAM is set up. Therefore choose an address
172 carefully.
173
174 We should consider removing this option and allocating the memory
175 in board_init_f_init_reserve() instead.
176
Simon Glassef26d602016-10-17 20:12:37 -0600177config CONSOLE_MUX
178 bool "Enable console multiplexing"
179 default y if DM_VIDEO || VIDEO || LCD
180 help
181 This allows multiple devices to be used for each console 'file'.
182 For example, stdout can be set to go to serial and video.
183 Similarly, stdin can be set to come from serial and keyboard.
184 Input can be provided from either source. Console multiplexing
185 adds a small amount of size to U-Boot. Changes to the environment
186 variables stdout, stdin and stderr will take effect immediately.
187
188config SYS_CONSOLE_IS_IN_ENV
189 bool "Select console devices from the environment"
190 default y if CONSOLE_MUX
191 help
192 This allows multiple input/output devices to be set at boot time.
Anatolij Gustschinde99e772021-10-04 16:04:32 +0200193 For example, if stdout is set to "serial,vidconsole" then output
194 will be sent to both the serial and video devices on boot. The
Simon Glassef26d602016-10-17 20:12:37 -0600195 environment variables can be updated after boot to change the
196 input/output devices.
197
Simon Glass84f2a5d2016-10-17 20:12:59 -0600198config SYS_CONSOLE_OVERWRITE_ROUTINE
199 bool "Allow board control over console overwriting"
200 help
201 If this is enabled, and the board-specific function
202 overwrite_console() returns 1, the stdin, stderr and stdout are
203 switched to the serial port, else the settings in the environment
204 are used. If this is not enabled, the console will not be switched
205 to serial.
206
Simon Glass3505bc52016-10-17 20:12:58 -0600207config SYS_CONSOLE_ENV_OVERWRITE
208 bool "Update environment variables during console init"
209 help
210 The console environment variables (stdout, stdin, stderr) can be
211 used to determine the correct console devices on start-up. This
212 option writes the console devices to these variables on console
213 start-up (after relocation). This causes the environment to be
214 updated to match the console devices actually chosen.
215
Simon Glassf3f3eff2016-10-17 20:13:00 -0600216config SYS_CONSOLE_INFO_QUIET
217 bool "Don't display the console devices on boot"
218 help
219 Normally U-Boot displays the current settings for stdout, stdin
220 and stderr on boot when the post-relocation console is set up.
Chris Packhamf7597732019-01-11 15:30:50 +1300221 Enable this option to suppress this output. It can be obtained by
Simon Glassf3f3eff2016-10-17 20:13:00 -0600222 calling stdio_print_current_devices() from board code.
223
Simon Glass869588d2016-10-17 20:13:02 -0600224config SYS_STDIO_DEREGISTER
225 bool "Allow deregistering stdio devices"
226 default y if USB_KEYBOARD
227 help
228 Generally there is no need to deregister stdio devices since they
229 are never deactivated. But if a stdio device is used which can be
230 removed (for example a USB keyboard) then this option can be
231 enabled to ensure this is handled correctly.
232
Simon Glass7e156382020-08-11 11:23:36 -0600233config SPL_SYS_STDIO_DEREGISTER
234 bool "Allow deregistering stdio devices in SPL"
235 help
236 Generally there is no need to deregister stdio devices since they
237 are never deactivated. But if a stdio device is used which can be
238 removed (for example a USB keyboard) then this option can be
239 enabled to ensure this is handled correctly. This is very rarely
240 needed in SPL.
241
242config SYS_DEVICE_NULLDEV
243 bool "Enable a null device for stdio"
Simon Glass3ca06092020-08-11 11:23:37 -0600244 default y if SPLASH_SCREEN || SYS_STDIO_DEREGISTER
Simon Glass7e156382020-08-11 11:23:36 -0600245 help
246 Enable creation of a "nulldev" stdio device. This allows silent
247 operation of the console by setting stdout to "nulldev". Enable
248 this to use a serial console under board control.
249
Simon Glass98af8792016-10-17 20:12:35 -0600250endmenu
251
Simon Glasse9c8d492017-12-04 13:48:24 -0700252menu "Logging"
253
254config LOG
255 bool "Enable logging support"
Michal Simek563273d2018-07-23 15:55:11 +0200256 depends on DM
Simon Glasse9c8d492017-12-04 13:48:24 -0700257 help
258 This enables support for logging of status and debug messages. These
259 can be displayed on the console, recorded in a memory buffer, or
260 discarded if not needed. Logging supports various categories and
261 levels of severity.
262
Heinrich Schuchardt7b6c34c2020-05-31 15:34:22 +0200263if LOG
Simon Glasse9c8d492017-12-04 13:48:24 -0700264
265config LOG_MAX_LEVEL
266 int "Maximum log level to record"
Heinrich Schuchardt7b6c34c2020-05-31 15:34:22 +0200267 default 6
268 range 0 9
Simon Glass4d8d3052018-11-15 18:43:49 -0700269 help
270 This selects the maximum log level that will be recorded. Any value
271 higher than this will be ignored. If possible log statements below
272 this level will be discarded at build time. Levels:
273
Simon Glass6fc7e932019-02-16 20:24:34 -0700274 0 - emergency
275 1 - alert
276 2 - critical
277 3 - error
278 4 - warning
279 5 - note
280 6 - info
Simon Glass4d8d3052018-11-15 18:43:49 -0700281 7 - debug
Simon Glass6fc7e932019-02-16 20:24:34 -0700282 8 - debug content
283 9 - debug hardware I/O
Simon Glass4d8d3052018-11-15 18:43:49 -0700284
Simon Glassf0b05c92019-02-16 20:24:35 -0700285config LOG_DEFAULT_LEVEL
286 int "Default logging level to display"
Heinrich Schuchardt7b6c34c2020-05-31 15:34:22 +0200287 default LOG_MAX_LEVEL
288 range 0 LOG_MAX_LEVEL
Simon Glassf0b05c92019-02-16 20:24:35 -0700289 help
290 This is the default logging level set when U-Boot starts. It can
291 be adjusted later using the 'log level' command. Note that setting
Andy Shevchenko69264f42019-06-12 15:35:24 +0300292 this to a value above LOG_MAX_LEVEL will be ineffective, since the
Simon Glassf0b05c92019-02-16 20:24:35 -0700293 higher levels are not compiled in to U-Boot.
294
295 0 - emergency
296 1 - alert
297 2 - critical
298 3 - error
299 4 - warning
300 5 - note
301 6 - info
302 7 - debug
303 8 - debug content
304 9 - debug hardware I/O
305
Simon Glassc6d47532017-12-04 13:48:25 -0700306config LOG_CONSOLE
307 bool "Allow log output to the console"
Simon Glassc6d47532017-12-04 13:48:25 -0700308 default y
309 help
310 Enables a log driver which writes log records to the console.
311 Generally the console is the serial port or LCD display. Only the
312 log message is shown - other details like level, category, file and
313 line number are omitted.
314
Heinrich Schuchardt3c21d772020-06-17 21:52:44 +0200315config LOGF_FILE
316 bool "Show source file name in log messages by default"
317 help
318 Show the source file name in log messages by default. This value
319 can be overridden using the 'log format' command.
320
321config LOGF_LINE
322 bool "Show source line number in log messages by default"
323 help
324 Show the source line number in log messages by default. This value
325 can be overridden using the 'log format' command.
326
327config LOGF_FUNC
328 bool "Show function name in log messages by default"
329 help
330 Show the function name in log messages by default. This value can
331 be overridden using the 'log format' command.
332
Simon Glass72fa1ad2021-07-05 16:33:00 -0600333config LOGF_FUNC_PAD
334 int "Number of characters to use for function"
335 default 20
336 help
337 Sets the field width to use when showing the function. Set this to
338 a larger value if you have lots of long function names, and want
339 things to line up.
340
Heinrich Schuchardtbefadde2020-02-26 21:48:16 +0100341config LOG_SYSLOG
342 bool "Log output to syslog server"
Heinrich Schuchardt7b6c34c2020-05-31 15:34:22 +0200343 depends on NET
Heinrich Schuchardtbefadde2020-02-26 21:48:16 +0100344 help
345 Enables a log driver which broadcasts log records via UDP port 514
346 to syslog servers.
347
Heinrich Schuchardt7b6c34c2020-05-31 15:34:22 +0200348config SPL_LOG
349 bool "Enable logging support in SPL"
350 depends on LOG
Simon Glassef11ed82017-12-04 13:48:27 -0700351 help
Heinrich Schuchardt7b6c34c2020-05-31 15:34:22 +0200352 This enables support for logging of status and debug messages. These
353 can be displayed on the console, recorded in a memory buffer, or
354 discarded if not needed. Logging supports various categories and
355 levels of severity.
356
357if SPL_LOG
358
359config SPL_LOG_MAX_LEVEL
360 int "Maximum log level to record in SPL"
361 depends on SPL_LOG
362 default 3
363 range 0 9
364 help
365 This selects the maximum log level that will be recorded. Any value
366 higher than this will be ignored. If possible log statements below
367 this level will be discarded at build time. Levels:
368
369 0 - emergency
370 1 - alert
371 2 - critical
372 3 - error
373 4 - warning
374 5 - note
375 6 - info
376 7 - debug
377 8 - debug content
378 9 - debug hardware I/O
379
380config SPL_LOG_CONSOLE
381 bool "Allow log output to the console in SPL"
382 default y
383 help
384 Enables a log driver which writes log records to the console.
385 Generally the console is the serial port or LCD display. Only the
386 log message is shown - other details like level, category, file and
387 line number are omitted.
388
389endif
390
391config TPL_LOG
392 bool "Enable logging support in TPL"
393 depends on LOG
394 help
395 This enables support for logging of status and debug messages. These
396 can be displayed on the console, recorded in a memory buffer, or
397 discarded if not needed. Logging supports various categories and
398 levels of severity.
399
400if TPL_LOG
401
402config TPL_LOG_MAX_LEVEL
403 int "Maximum log level to record in TPL"
404 depends on TPL_LOG
405 default 3
406 range 0 9
407 help
408 This selects the maximum log level that will be recorded. Any value
409 higher than this will be ignored. If possible log statements below
410 this level will be discarded at build time. Levels:
411
412 0 - emergency
413 1 - alert
414 2 - critical
415 3 - error
416 4 - warning
417 5 - note
418 6 - info
419 7 - debug
420 8 - debug content
421 9 - debug hardware I/O
422
423config TPL_LOG_CONSOLE
424 bool "Allow log output to the console in TPL"
425 default y
426 help
427 Enables a log driver which writes log records to the console.
428 Generally the console is the serial port or LCD display. Only the
429 log message is shown - other details like level, category, file and
430 line number are omitted.
431
432endif
Simon Glassef11ed82017-12-04 13:48:27 -0700433
Simon Glass3707c6e2017-12-28 13:14:23 -0700434config LOG_ERROR_RETURN
435 bool "Log all functions which return an error"
Simon Glass3707c6e2017-12-28 13:14:23 -0700436 help
437 When an error is returned in U-Boot it is sometimes difficult to
Chris Packhamf7597732019-01-11 15:30:50 +1300438 figure out the root cause. For example, reading from SPI flash may
Simon Glass3707c6e2017-12-28 13:14:23 -0700439 fail due to a problem in the SPI controller or due to the flash part
440 not returning the expected information. This option changes
441 log_ret() to log any errors it sees. With this option disabled,
442 log_ret() is a nop.
443
444 You can add log_ret() to all functions which return an error code.
445
Heinrich Schuchardt7b6c34c2020-05-31 15:34:22 +0200446config LOG_TEST
447 bool "Provide a test for logging"
448 depends on UNIT_TEST
449 default y if SANDBOX
450 help
451 This enables a 'log test' command to test logging. It is normally
452 executed from a pytest and simply outputs logging information
453 in various different ways to test that the logging system works
454 correctly with various settings.
455
456endif
457
Simon Glasse9c8d492017-12-04 13:48:24 -0700458endmenu
459
Simon Glass7df39e52020-09-10 20:21:21 -0600460menu "Init options"
461
Simon Glassa4c4ecf2020-09-10 20:21:26 -0600462config BOARD_TYPES
463 bool "Call get_board_type() to get and display the board type"
464 help
465 If this option is enabled, checkboard() will call get_board_type()
466 to get a string containing the board type and this will be
467 displayed immediately after the model is shown on the console
468 early in boot.
469
Lokesh Vutla19a97472016-10-08 14:41:44 -0400470config DISPLAY_CPUINFO
471 bool "Display information about the CPU during start up"
Alexey Brodkinf31414a2018-10-02 11:43:28 +0300472 default y if ARC|| ARM || NIOS2 || X86 || XTENSA || M68K
Lokesh Vutla19a97472016-10-08 14:41:44 -0400473 help
474 Display information about the CPU that U-Boot is running on
475 when U-Boot starts up. The function print_cpuinfo() is called
476 to do this.
477
Lokesh Vutla84351792016-10-11 21:33:46 -0400478config DISPLAY_BOARDINFO
Mario Six78eba692018-03-28 14:38:17 +0200479 bool "Display information about the board during early start up"
Alexey Brodkinf31414a2018-10-02 11:43:28 +0300480 default y if ARC || ARM || M68K || MIPS || PPC || SANDBOX || XTENSA
Lokesh Vutla84351792016-10-11 21:33:46 -0400481 help
482 Display information about the board that U-Boot is running on
483 when U-Boot starts up. The board function checkboard() is called
484 to do this.
485
Mario Six78eba692018-03-28 14:38:17 +0200486config DISPLAY_BOARDINFO_LATE
487 bool "Display information about the board during late start up"
488 help
489 Display information about the board that U-Boot is running on after
490 the relocation phase. The board function checkboard() is called to do
491 this.
492
Simon Glassa4211922017-01-23 13:31:19 -0700493menu "Start-up hooks"
494
495config ARCH_EARLY_INIT_R
496 bool "Call arch-specific init soon after relocation"
Simon Glassa4211922017-01-23 13:31:19 -0700497 help
498 With this option U-Boot will call arch_early_init_r() soon after
499 relocation. Driver model is running by this point, and the cache
500 is on. Note that board_early_init_r() is called first, if
501 enabled. This can be used to set up architecture-specific devices.
502
Simon Glass45856012017-01-23 13:31:21 -0700503config ARCH_MISC_INIT
504 bool "Call arch-specific init after relocation, when console is ready"
505 help
506 With this option U-Boot will call arch_misc_init() after
507 relocation to allow miscellaneous arch-dependent initialisation
508 to be performed. This function should be defined by the board
Chris Packhamf7597732019-01-11 15:30:50 +1300509 and will be called after the console is set up, after relocation.
Simon Glass45856012017-01-23 13:31:21 -0700510
Simon Glassa5d67542017-01-23 13:31:20 -0700511config BOARD_EARLY_INIT_F
512 bool "Call board-specific init before relocation"
Simon Glassa5d67542017-01-23 13:31:20 -0700513 help
514 Some boards need to perform initialisation as soon as possible
515 after boot. With this option, U-Boot calls board_early_init_f()
516 after driver model is ready in the pre-relocation init sequence.
517 Note that the normal serial console is not yet set up, but the
518 debug UART will be available if enabled.
519
Mario Six02ddc142018-03-28 14:38:15 +0200520config BOARD_EARLY_INIT_R
521 bool "Call board-specific init after relocation"
522 help
523 Some boards need to perform initialisation as directly after
524 relocation. With this option, U-Boot calls board_early_init_r()
525 in the post-relocation init sequence.
526
Simon Glass7e349e92020-09-10 20:21:23 -0600527config BOARD_LATE_INIT
528 bool "Execute Board late init"
529 help
530 Sometimes board require some initialization code that might
531 require once the actual init done, example saving board specific env,
532 boot-modes etc. which eventually done at late.
533
534 So this config enable the late init code with the help of board_late_init
535 function which should defined on respective boards.
536
Tom Riniada261f2021-12-12 22:12:34 -0500537config SYS_FSL_CLK
538 bool
539 depends on ARCH_LS1021A || FSL_LSCH2 || FSL_LSCH3 || \
540 (FSL_ESDHC_IMX && (ARCH_MX5 || ARCH_MX6 || ARCH_MX7))
541 default y
542 help
543 Enable to call get_clocks() in board_init_f() for platforms other
544 than PowerPC or M68k. This is a legacy option. If not TARGET_BRPPT2
545
Mario Six2aeb22d2018-03-28 14:38:16 +0200546config LAST_STAGE_INIT
547 bool "Call board-specific as last setup step"
548 help
549 Some boards need to perform initialisation immediately before control
550 is passed to the command-line interpreter (e.g. for initializations
551 that depend on later phases in the init sequence). With this option,
552 U-Boot calls last_stage_init() before the command-line interpreter is
553 started.
554
Simon Glass48f45452021-03-26 16:17:30 +1300555config MISC_INIT_F
556 bool "Execute pre-relocation misc init"
557 help
558 Enabling this option calls the 'misc_init_f' function in the init
559 sequence just before DRAM is inited.
560
Simon Glass7e349e92020-09-10 20:21:23 -0600561config MISC_INIT_R
562 bool "Execute Misc Init"
563 default y if ARCH_KEYSTONE || ARCH_SUNXI || MPC85xx
564 default y if ARCH_OMAP2PLUS && !AM33XX
565 help
566 Enabling this option calls 'misc_init_r' function
567
Tom Rinid7d40f62021-08-17 17:59:41 -0400568config ID_EEPROM
569 bool "Enable I2C connected system identifier EEPROM"
570 help
571 A number of different systems and vendors enable a vendor-specified
572 EEPROM that contains various identifying features.
573
Ovidiu Panait98bf46f2020-05-06 20:38:44 +0300574config PCI_INIT_R
575 bool "Enumerate PCI buses during init"
576 depends on PCI
Ovidiu Panait98bf46f2020-05-06 20:38:44 +0300577 help
578 With this option U-Boot will call pci_init() soon after relocation,
579 which will enumerate PCI buses. This is needed, for instance, in the
580 case of DM PCI-based Ethernet devices, which will not be detected
581 without having the enumeration performed earlier.
582
Simon Glassa4211922017-01-23 13:31:19 -0700583endmenu
584
Simon Glass38663132020-09-10 20:21:22 -0600585endmenu # Init options
586
Simon Glassd70f9192017-05-17 09:05:34 -0600587menu "Security support"
588
589config HASH
590 bool # "Support hashing API (SHA1, SHA256, etc.)"
591 help
592 This provides a way to hash data in memory using various supported
593 algorithms (such as SHA1, MD5, CRC32). The API is defined in hash.h
594 and the algorithms it supports are defined in common/hash.c. See
595 also CMD_HASH for command-line access.
596
Igor Opaniukb0aa74a2018-07-17 14:33:25 +0300597config AVB_VERIFY
598 bool "Build Android Verified Boot operations"
Usama Arife61b4152020-08-11 15:46:03 +0100599 depends on LIBAVB
Heinrich Schuchardt9c3808d2021-01-25 12:17:57 +0100600 depends on MMC
Eugeniu Rosca87c814d2018-08-14 02:43:05 +0200601 depends on PARTITION_UUIDS
Igor Opaniukb0aa74a2018-07-17 14:33:25 +0300602 help
603 This option enables compilation of bootloader-dependent operations,
604 used by Android Verified Boot 2.0 library (libavb). Includes:
605 * Helpers to process strings in order to build OS bootargs.
606 * Helpers to access MMC, similar to drivers/fastboot/fb_mmc.c.
607 * Helpers to alloc/init/free avb ops.
608
Usama Arife61b4152020-08-11 15:46:03 +0100609if AVB_VERIFY
610
611config AVB_BUF_ADDR
612 hex "Define AVB buffer address"
613 default FASTBOOT_BUF_ADDR
614 help
615 AVB requires a buffer for memory transactions. This variable defines the
616 buffer address.
617
618config AVB_BUF_SIZE
619 hex "Define AVB buffer SIZE"
620 default FASTBOOT_BUF_SIZE
621 help
622 AVB requires a buffer for memory transactions. This variable defines the
623 buffer size.
624
625endif # AVB_VERIFY
626
Jorge Ramirez-Ortiz166363f2021-02-14 16:27:23 +0100627config SCP03
628 bool "Build SCP03 - Secure Channel Protocol O3 - controls"
629 depends on OPTEE || SANDBOX
630 depends on TEE
631 help
632 This option allows U-Boot to enable and or provision SCP03 on an OPTEE
633 controlled Secured Element.
634
Simon Glassc0126bd2018-11-06 15:21:28 -0700635config SPL_HASH
636 bool # "Support hashing API (SHA1, SHA256, etc.)"
637 help
638 This provides a way to hash data in memory using various supported
639 algorithms (such as SHA1, MD5, CRC32). The API is defined in hash.h
640 and the algorithms it supports are defined in common/hash.c. See
641 also CMD_HASH for command-line access.
642
643config TPL_HASH
644 bool # "Support hashing API (SHA1, SHA256, etc.)"
645 help
646 This provides a way to hash data in memory using various supported
647 algorithms (such as SHA1, MD5, CRC32). The API is defined in hash.h
648 and the algorithms it supports are defined in common/hash.c. See
649 also CMD_HASH for command-line access.
650
Joel Peshkin4e9bce12021-04-11 11:21:58 +0200651config STACKPROTECTOR
652 bool "Stack Protector buffer overflow detection"
Joel Peshkin4e9bce12021-04-11 11:21:58 +0200653 help
654 Enable stack smash detection through compiler's stack-protector
655 canary logic
656
657config SPL_STACKPROTECTOR
658 bool "Stack Protector buffer overflow detection for SPL"
659 depends on STACKPROTECTOR && SPL
Joel Peshkin4e9bce12021-04-11 11:21:58 +0200660
661config TPL_STACKPROTECTOR
662 bool "Stack Protector buffer overflow detection for TPL"
663 depends on STACKPROTECTOR && TPL
Joel Peshkin4e9bce12021-04-11 11:21:58 +0200664
Simon Glassd70f9192017-05-17 09:05:34 -0600665endmenu
666
Marek Vasutb254c522018-02-10 16:22:06 +0100667menu "Update support"
668
AKASHI Takahiro3149e522020-10-29 13:47:43 +0900669config UPDATE_COMMON
670 bool
AKASHI Takahiro3149e522020-10-29 13:47:43 +0900671 select DFU_WRITE_ALT
672
Marek Vasutb254c522018-02-10 16:22:06 +0100673config UPDATE_TFTP
674 bool "Auto-update using fitImage via TFTP"
675 depends on FIT
AKASHI Takahiro3149e522020-10-29 13:47:43 +0900676 select UPDATE_COMMON
Marek Vasutb254c522018-02-10 16:22:06 +0100677 help
678 This option allows performing update of NOR with data in fitImage
679 sent via TFTP boot.
680
681config UPDATE_TFTP_CNT_MAX
682 int "The number of connection retries during auto-update"
683 default 0
684 depends on UPDATE_TFTP
685
686config UPDATE_TFTP_MSEC_MAX
687 int "Delay in mSec to wait for the TFTP server during auto-update"
688 default 100
689 depends on UPDATE_TFTP
690
AKASHI Takahiro3149e522020-10-29 13:47:43 +0900691config UPDATE_FIT
692 bool "Firmware update using fitImage"
693 depends on FIT
694 depends on DFU
695 select UPDATE_COMMON
696 help
697 This option allows performing update of DFU-capable storage with
698 data in fitImage.
699
Ruslan Trofymenkod65e8da2019-07-05 15:37:32 +0300700config ANDROID_AB
701 bool "Android A/B updates"
Ruslan Trofymenkod65e8da2019-07-05 15:37:32 +0300702 help
703 If enabled, adds support for the new Android A/B update model. This
704 allows the bootloader to select which slot to boot from based on the
705 information provided by userspace via the Android boot_ctrl HAL. This
706 allows a bootloader to try a new version of the system but roll back
707 to previous version if the new one didn't boot all the way.
708
Marek Vasutb254c522018-02-10 16:22:06 +0100709endmenu
710
Simon Glass9f407d42018-11-15 18:43:50 -0700711menu "Blob list"
712
713config BLOBLIST
714 bool "Support for a bloblist"
715 help
716 This enables support for a bloblist in U-Boot, which can be passed
717 from TPL to SPL to U-Boot proper (and potentially to Linux). The
718 blob list supports multiple binary blobs of data, each with a tag,
719 so that different U-Boot components can store data which can survive
Simon Glass5938d652022-01-12 19:26:21 -0700720 through to the next phase of the boot.
Simon Glass9f407d42018-11-15 18:43:50 -0700721
722config SPL_BLOBLIST
723 bool "Support for a bloblist in SPL"
724 depends on BLOBLIST
725 default y if SPL
726 help
727 This enables a bloblist in SPL. If this is the first part of U-Boot
728 to run, then the bloblist is set up in SPL and passed to U-Boot
729 proper. If TPL also has a bloblist, then SPL uses the one from there.
730
731config TPL_BLOBLIST
732 bool "Support for a bloblist in TPL"
733 depends on BLOBLIST
734 default y if TPL
735 help
736 This enables a bloblist in TPL. The bloblist is set up in TPL and
737 passed to SPL and U-Boot proper.
738
Simon Glassd5b6e912021-11-03 21:09:20 -0600739if BLOBLIST
740
Simon Glass99047f52022-01-12 19:26:22 -0700741choice
742 prompt "Bloblist location"
Simon Glass9f407d42018-11-15 18:43:50 -0700743 help
Simon Glass99047f52022-01-12 19:26:22 -0700744 Select the location of the bloblist, via various means.
745
746config BLOBLIST_FIXED
747 bool "Place bloblist at a fixed address in memory"
748 help
749 Select this to used a fixed memory address for the bloblist. If the
750 bloblist exists at this address from a previous phase, it used as is.
751 If not it is created at this address in U-Boot.
Simon Glass9f407d42018-11-15 18:43:50 -0700752
Simon Glassd5b6e912021-11-03 21:09:20 -0600753config BLOBLIST_ALLOC
754 bool "Allocate bloblist"
755 help
756 Allocate the bloblist using malloc(). This avoids the need to
757 specify a fixed address on systems where this is unknown or can
758 change at runtime.
759
Simon Glass99047f52022-01-12 19:26:22 -0700760endchoice
761
Simon Glass9f407d42018-11-15 18:43:50 -0700762config BLOBLIST_ADDR
763 hex "Address of bloblist"
Simon Glassecc1ed92021-07-05 16:32:48 -0600764 default 0xc000 if SANDBOX
Simon Glass99047f52022-01-12 19:26:22 -0700765 depends on BLOBLIST_FIXED
Simon Glass9f407d42018-11-15 18:43:50 -0700766 help
767 Sets the address of the bloblist, set up by the first part of U-Boot
Simon Glass5938d652022-01-12 19:26:21 -0700768 which runs. Subsequent U-Boot phases typically use the same address.
Simon Glass9f407d42018-11-15 18:43:50 -0700769
Simon Glassd5b6e912021-11-03 21:09:20 -0600770 This is not used if BLOBLIST_ALLOC is selected.
771
Simon Glass99047f52022-01-12 19:26:22 -0700772config BLOBLIST_SIZE
773 hex "Size of bloblist"
774 default 0x400
775 help
776 Sets the size of the bloblist in bytes. This must include all
777 overhead (alignment, bloblist header, record header). The bloblist
778 is set up in the first part of U-Boot to run (TPL, SPL or U-Boot
779 proper), and this sane bloblist is used for subsequent phases.
780
Simon Glass9fe06462021-01-13 20:29:43 -0700781config BLOBLIST_SIZE_RELOC
782 hex "Size of bloblist after relocation"
Simon Glass99047f52022-01-12 19:26:22 -0700783 default BLOBLIST_SIZE if BLOBLIST_FIXED || BLOBLIST_ALLOC
784 default 0 if BLOBLIST_PASSAGE
Simon Glass9fe06462021-01-13 20:29:43 -0700785 help
786 Sets the size of the bloblist in bytes after relocation. Since U-Boot
787 has a lot more memory available then, it is possible to use a larger
788 size than the one set up by SPL. This bloblist is set up during the
789 relocation process.
790
Simon Glassd5b6e912021-11-03 21:09:20 -0600791endif # BLOBLIST
792
Simon Glass99047f52022-01-12 19:26:22 -0700793if SPL_BLOBLIST
794
795choice
796 prompt "Bloblist location in SPL"
797 help
798 Select the location of the bloblist, via various means. Typically
799 you should use the same value for SPL as for U-Boot, since they need
800 to look in the same place. But if BLOBLIST_ALLOC is used, then a
801 fresh bloblist will be created each time, since there is no shared
802 address (between phases) for the bloblist.
803
804config SPL_BLOBLIST_FIXED
805 bool "Place bloblist at a fixed address in memory"
806 help
807 Select this to used a fixed memory address for the bloblist. If the
808 bloblist exists at this address from a previous phase, it used as is.
809 If not it is created at this address in SPL.
810
811config SPL_BLOBLIST_ALLOC
812 bool "Allocate bloblist"
813 help
814 Allocate the bloblist using malloc(). This avoids the need to
815 specify a fixed address on systems where this is unknown or can
816 change at runtime.
817
818endchoice
819
820endif # SPL_BLOBLIST
821
822if TPL_BLOBLIST
823
824choice
825 prompt "Bloblist location in TPL"
826 help
827 Select the location of the bloblist, via various means. Typically
828 you should use the same value for SPL as for U-Boot, since they need
829 to look in the same place. But if BLOBLIST_ALLOC is used, then a
830 fresh bloblist will be created each time, since there is no shared
831 address (between phases) for the bloblist.
832
833config TPL_BLOBLIST_FIXED
834 bool "Place bloblist at a fixed address in memory"
835 help
836 Select this to used a fixed memory address for the bloblist. If the
837 bloblist exists at this address from a previous phase, it used as is.
838 If not it is created at this address in TPL.
839
840config TPL_BLOBLIST_ALLOC
841 bool "Allocate bloblist"
842 help
843 Allocate the bloblist using malloc(). This avoids the need to
844 specify a fixed address on systems where this is unknown or can
845 change at runtime.
846
847endchoice
848
849endif # TPL_BLOBLIST
850
Simon Glass9f407d42018-11-15 18:43:50 -0700851endmenu
852
Simon Glassc2ae7d82016-09-12 23:18:22 -0600853source "common/spl/Kconfig"
AKASHI Takahirob983cc22020-02-21 15:12:55 +0900854
855config IMAGE_SIGN_INFO
856 bool
857 select SHA1
858 select SHA256
859 help
860 Enable image_sign_info helper functions.
Heinrich Schuchardt64411642020-04-15 18:46:21 +0200861
862if IMAGE_SIGN_INFO
863
864config SPL_IMAGE_SIGN_INFO
865 bool
866 select SHA1
867 select SHA256
868 help
869 Enable image_sign_info helper functions in SPL.
870
871endif
Patrick Delaunayd71587c2021-11-15 16:32:17 +0100872
873config FDT_SIMPLEFB
874 bool "FDT tools for simplefb support"
875 depends on OF_LIBFDT
876 help
877 Enable the fdt tools to manage the simple fb nodes in device tree.
878 These functions can be used by board to indicate to the OS
879 the presence of the simple frame buffer with associated reserved
880 memory